I've made a simple form to Login/Logout with radio buttons but the buttons only allow me to push a number as a value, in my case 1 or 2 for Login or Logout.
How would I make an update query to change those numbers to the equivalent text? Or is that not possible in the same field because that is 2 different data types?
Code: INSERT INTO TB_SISTEMAS ( LOGIN, SISTEMA, PERFIL, DATA ) SELECT Left([dbo_BACKUP_ACESSOS.LOGIN],255) AS LOGIN, dbo_BACKUP_ACESSOS.SISTEMA, Left([dbo_BACKUP_ACESSOS.PERFIL],255) AS PERFIL, dbo_BACKUP_ACESSOS.DATA FROM dbo_BACKUP_ACESSOS WHERE (((dbo_BACKUP_ACESSOS.SISTEMA)<>"ACTIVE DIRECTORY") AND ((dbo_BACKUP_ACESSOS.DATA)="2014-03-23"));
But Iwant to be able to use a set of data to be used in the Replace Statement, so I create a table to add each string I would like to have replaced by "nothing", and trying to make the replace query to look there in order to find what to replace.I also created a table where I will list the systems that I dont want in the select, so I removed the "ACTIVE DIRECTORY" and replaced by the colum that have the list of system I dont want listed.This is the result:
Code: INSERT INTO TB_SISTEMAS ( LOGIN, SISTEMA, PERFIL, DATA ) SELECT Replace((Left([dbo_BACKUP_ACESSOS.LOGIN],255)),[PREFIXOS_E_SUFIXOS]![Valor],"") AS LOGIN, dbo_BACKUP_ACESSOS.SISTEMA, Left([dbo_BACKUP_ACESSOS.PERFIL],255) AS PERFIL, dbo_BACKUP_ACESSOS.DATA FROM dbo_BACKUP_ACESSOS WHERE (((dbo_BACKUP_ACESSOS.SISTEMA)<>[SISTEMAS_EXCLUIDOS]![Sistema]) AND ((dbo_BACKUP_ACESSOS.DATA)="2014-03-23"));
The thin is that this keeps asking me to enter the parameter value for "PREFIXOS_E_SUFIXOS!Valor" and for "SISTEMAS_EXCLUIDOS!Sistema"
I have a Table1 served by Form1..It is a list of: UnqID, process, quantity, totaltime(in seconds).I want to click on a record to bring up a filtered Form2 with the chosen record on it.What I want to be able to do is to now split the quantity (and the time) and put these new records back into Table1 and delete the original record
EG
ID1,10,write a report,2400
I want to delete this and replace it with two (or three/four etc) replacements, but still adding up to 10 quantity and 2400 seconds so that the new data could be:
ID2,5,write a report,1200 ID3,5,write a report,1200
My initial thoughts are to create a holding table to:Append filtered data on Form2 to a holding Table1hld (i don't know how to do this) delete data in Table1.then enter the new quantities into a holding Table2 (that I will input myself) and then append (through a series of queries back into Table1).The first problem is how to append (and subsequently delete) the filtered record from Form2 to Table1hld.
Code: "UPDATE Individuals SET [ShareholderOf] = " & Me.CompanyNo & " WHERE [Name] = '" & PerName & "';"
However, doing so will obviously change the "Shareholder of" field into what the user inputs (Me.CompanyNo). What should I use if I want it to ADD the user input rather than REPLACING the old [shareholderof] value?
The company I work for is consolidating regional server space onto a single server. I have relinked all of my tables, but my ~180 queries are still pointing to the old server.
My question: Is there a script or other process that can be executed that will search through all my queries within the database to find the string "dbo_tbl" and replace with "dbo_vwtbl"? I would very much like to avoid taking each individual query to a notepad...
We have a field of 7m records of varying length, some of which are numbers, some just letters, some alphanumeric, and most which include a dash, space or some sort of punctuation mark.
We need to replace all letters with "L", then replace all digits with "@".
We can replace characters individually using this update query:
Replace([Ref Digit Or Letter],"A","L")
But would like to use wildcard searches to resolve this, something like (these don't work!)...
Replace([Ref Digit Or Letter],"A-Z","L") Replace([Ref Digit Or Letter],"LIKE [*A-Z*]","L")
I have a seating chart with 33 tables. Under each table there is a number that represents seats taken. I want to do a query that changes the number when it is a certain value. For example, when the value is null I want it to say "Empty", when the value is 10 I want it to say "Full" and when the value is over 10 I want it to say "Over". If the value is 1-9 I want to leave it as is.I know how to accomplish one at a time but not all three together. I've been useing:
How do I get an update query to only copy part of a fields value?For example: The original field has a date in month, day, and year. I only want to update the new field with only the year.
I have been spending all my today to fill a combobox dynamically, but have not been able yet.
I have a combobox and a pass-through query in access, which is working fine and fill the details into the combobox via data source. Now what I am planning to do is to update the combobox source as soon as value in a text box changes.
Here is the code I am using, but it is not working:
Dim rs As Recordset Dim qDef As QueryDef Set qDef = CurrentDb.QueryDefs("get_data") qDef.SQL = "SELECT Initial + ' (' + Name + ')' uws FROM EM.dbo.UW" _ & " WHERE lob = '" & addSingleQuotation(Me.CMB_LOB.Value) & "'"
Me.cmbUM.RowSource = qDef.SQL Me.cmbUM.Requery
I also used Recordset, but did not work:
Set rs = CurrentDb.OpenRecordset("get_data") Me.cmbUM.RowSource = rs!uws
I've sent a post about this before and got some of the answer from 'Dennisk'- thanks.
I want to replace composite keys with a primary. I've just made an autonumber field on one table for my new primary key and already populated it. On the foreign table ive made a new field with 'number' datatype; this field is empty at the moment.
I'm not sure how to update the foriegn tables new field with the primary tables data. I've saw it before and remember it being easy, just can't remember how to do it.
I obviously want the numbers in the primary key field to relate to the correct records in the foriegn table.
Anyone know what the query is or if there's another way?
In access Im working with two tables, this is my setup
tableA.documentnr tableA.revison
tableB.documentnr tableB.revision
Both tables are filled with data, Table B contains the same kind of data as table A, But tableA has documentnumbers with different revisions (for example revision a,b,c, for each revision a seperate row). Table B might have an identical document, but just one revision (like revision a).
Now I like to append the data of tableA to tableB, except if a revision is similiar to a revision in table A. (There is more metadata involved, but I will do it step by step)
Im not working with primarykey data, becayse in the end result table B will also have multiple (identical)document numbers with different revisions on different rows.
I tried to use the update query but it doenst append the documentnumbers where the revision is not present in table B I attached a image of the tables.
I have a table that is updated from an update query which gets its data from a table, which gets its data from a form. I have set the query to only update the current record, this is done by a macro when the user exits the input box. The problem arises when a user goes to visit past record, I would like it to not overwrite the old data with the new data. If the query was only allowed to ADD data and not overwrite then this would fix the problem!
Would I use an update query or function to complete my task?
Task: Automatically update [Status] based on DateDiff calculation of [RequestDate] and [DueDate]
Issue: [Status] can be one of 6 values, the user can manually select Review or Completed.
[Status] values: Review; Completed; Due in 24; Due in 24-48; Beyond 48; Over Due
Query: Below is the query I just started to ignore the calculation if either Review or Completed exist.
Expr1: IIf([Status]="Review",[Status],IIf([Status]="Completed",[Status],DateDiff('d',[RequestDate],[DueDate])))If the value from above DateDiff equals to the below, I want to update the [Status] field to the [Status] value.
Due in 24 = (0-1) Due in 24-48 = (2-3) Beyond 48 = (greater than or equal to 4) Over Due= (-1)
i have two tables one is "empdata" and other is "consolidate data".In consolidate data ,i have all personal and salary data for one year of each employee but i update some employee data in empdata now i want to update each employee updated data to update in consolidate data. i want to do it with update query which run with form,is form i want create 2 combo box, 1st is employee name and 2nd is field name(which to be updated i.e. Date of birth)now i have one text box (in which i enter the value for update in employee data i.e.04/05/1976(date of birth)).how can i link this form to my update query as
1st combo box value is equal to creteria, 2nd combo box is equal to field in consolidate
I am running a query for an apparel manufacturing facility. In my query I have a table called 'OrderForm' which is where the orders are put in. There are more than one type of fabric that can be a part of an apparel item, so as a result, there are multiple fields pulling from the 'FabricType' table. In order to get this to work in my query I created 'SubTables' for the different fabric fields. For example, I have tblFrontfab, tblbackfab, tblsleevefab, and tblcollarfab which are just extra copies of the 'FabricType' table. The actual question is that when I want to replace characters like ,./& in the fabric field but I can't use the replace function. It says that it is too complex to calculate.
I used this notation Frontfab: Replace([tblFrontfab].[fabric],".","") and the error was that it is to complex to evaluate.
I have a database that needs data to be reentered every school term, at the moment i am having to delete selected data fields manually. im looking to create a query so that the data is deleted by running it. The data would be returned to a blank field. I have tried using a delete query but it is asking for the selected table, even though a selected table exists. Using the update query i am faced with updating the query to a typed word however i just want it blank.
Why update query isn't working when trying to update an multivalued field. In this table, there are 647 records and only 9 of which already have a value set in the "AssociatedProject" field. More than one AssociatedProject is associated with a vendor, so this field allows for multiple entries. I've looked at all the information on update queries and updating a multivalued field, but it will only update the existing 9 records. It does not recognize the remaining ones (they have no values yet).
Here's the SQL:
UPDATE Tbl_Vendor SET Tbl_Vendor.AssociatedProject.[Value] = 3 WHERE (((Tbl_Vendor.AssociatedProject.Value) Is Null));
I need to update the periodtype field in my table depending on different values in the field Formtype- I am looking to do this without having to use VBA. I have the following fields in a table - I want to update the value of the field Period_type as follows -
When Formtype is 10-Q, update Periodtype to "Quarterly"
When Formtype is 10-K, update Periodtype to "Annual"
The current value of Periodtype for both formtypes is "Semiannual"
What I have a a form that my lab supervisor would use. That person selects the records that are to be modified and assigns work, completes work or otherwise updates the status of the records. One of the options is to mark a record as not having a sample here if it has already been marked as having been here. So essentially, I want to modify the record to change the sample arrival date and sample number field (which is a foreign key field) to null or empty. I have created a delete query that deletes the corresponding record just fine.I just am having difficulty updating the two fields mentioned above. When the supervisor selects the record the primary key for that record is also picked up so it is easy to know exactly what record to adjust. The query returns the information to be updated just fine, it just doesn't do that. Here is the sql of the query. As I said, I don't care if the fields are empty or null. Also the fields aren't required.
Code: UPDATE TestRequestTable SET TestRequestTable.SampleLocation = "", TestRequestTable.SampleArrivalDate = "" WHERE (((TestRequestTable.TestRequestNumber)=[Forms]![LabScheduleForm]![TRNumberCombo]));
I have a created a query which I want to update a table. The field is called DTP. I have the Workingdays2 module in place as well as the Holidays Table. The dates (date only) are called Time in and Transaction date. I want the table to update records only if the entry in Completed is Yes. I have attached screenshot of what I have in query. I am no good whatsoever at VBA so I used the Query design view. It shows how many records will be updated (which is a valid number) and shows me which field will be updated. However when I run the query and then opend the Table the DTP field is empty.
I have an update query for tGLCashAccount where it adds a value from another table with the BeginningBalance to arrive at CurrentBalance.
Here's what it looks like in design view:
Field: CurrentBalance Table: tGLCashAcct Update to: [tMakeNewCashBal].[TotalPrice]+[tGLCashAcct].[BeginningBalance]
Here is SQL code: UPDATE tGLCashAcct, tMakeNewCashBal SET tGLCashAcct.CurrentBalance = [tMakeNewCashBal].[TotalPrice]+[tGLCashAcct].[BeginningBalance] WHERE (((tGLCashAcct.GLCashAcctID)="102"));
I get the error: data type mismatch in criteria expression when I run it.
