Attached I have a database that I've been working on which has a form called "frmCriteriaSearch". It is based off of the qryCriteriaListBoxUpdate query. I am trying to get the listbox in the second tab of the results section to work. It queries fine for the checkboxes, but I cannot get the comboboxes to affect the query (unless a checkbox has already been selected)
View RepliesI am trying to make a search option in my form header. Right now I have two unbound combo boxes (CboAccountsfilter and cboCourseName) that I can use to filter my records. Currently, I can use the drop down for CboAccountsfilter and a list of accounts will appear. When I select one, the corresponding Course Names will appear in cboCourseName. This works fine...Code below. I would like to take the filtering a step farther and add checkboxes to filter the data. I my form, there currently exist several check boxes (yes/no)...(Priority, Rep Top Target, Manager Top Target, ect). I would like to have the option to use a check box to filter. I.E if I had a checkbox in my header called PriorityFilter, if checked it would only bring up those records that met the two combo boxes criteria and was a priority.
Below is the code I have so far...it doesnt have anything for the checkbox because I am at a lost of how to get started.
Private Sub CboAccountsfilter_Change()
Me.Requery
Me.cboCourseName.Requery
Me.Check178.Requery
End Sub
[code]...
I'm trying to build an database for aircraft operators. I've got the basic tables structure and relationships but I'm stuck on building an search form to filter records by user input.I've got following controls on my form (unbound):
1. AircraftType (combo box) from tblAircrafts
2. CompanyName (combo box) from tblListOfAircraftsOperators
3. TeailNumber (text box) from tblAircraftOperators
4. AirportNameSearch (combo box) from tblAirports
5. PassengersNumber (text box) from tblAircraftOperators
6. ManufactureYear (text box) from tblAircraftOperators
7. SourceSearch (combo box) from tblInfoSource
8. CountrySearch (combo box) from tblCountry
9. CategorySearch (combo box) from tblAircraftCategory
10. EamilToOperator (text box) from tblAircraftOperators
11. InteriorPhoto (Bound object frame) from tblAircraftOperators
12. ExteriorPhot (bound object frame) from AircraftOperators
I need to enable users to search for aircrafts based on those criteria. As I mentioned I'm new to Access and I don't have any advanced coding skills. I have a query build to perform the search and this is the code I've managed to write so far:
SELECT AircraftOperators.RegistrationNumber, AircraftOperators.PassengersNumber, AircraftOperators.ManufactureYear, AircraftOperators.EmailToOperator, AircraftOperators.ExteriorPhoto, AircraftOperators.InteriorPhoto, tblListOfAircraftOperators.OpratorName, tblAircrafts.AircraftType
FROM tblAircrafts INNER JOIN (tblAirports INNER JOIN (AircraftOperators INNER JOIN tblListOfAircraftOperators ON AircraftOperators.CompanyName =
[code]....
Hello all,
I have combo boxes populated with all values in a particular field, then shunt the form onto that record (standard combo box for selecting records from a list in other words).
Problem is, these boxes seem to stop working if I leave the form for another and then return to it.
Here's the code Access puts behind:
-----------
Set SerialRS = Me.Recordset.Clone
SerialRS.FindFirst "[Serial Number] = '" & Me![Combo60] & "'"
If Not SerialRS.EOF Then Me.Bookmark = SerialRS.Bookmark
-----------
The form may be opened and closed via other processes (although never unloaded), but when I come back to it these combo boxes always stop working! Why?
New to access...just build a form, in which there are combo boxes....cascading of boxes was done.
Now the problem is I want afterupdate function to get activated when user changes the value of one combo....for which I have created a code in code builder... see the code... I think I am making a mistake in writing the code to requery...
I have a main form with two combo boxes on which are linked if you select from the first cbo it filter the second. I also have subform that has a combo box on which is filtered by the second cbo on the main form. All works lovely when adding a new record BUT when I move to another record the cbo entries in the subform are not there, there are saving to the table are all the other data is showing just not the combo box entries - to get round this I have to reselect from the second cbo click into the subform and refresh and then they appear but this isn't how it's meant to work and I'd have to do this on every record but it then resets the previous one
I think I'm going mad!
Any help would be great
I have re-written this question as I think I managed to cause confusion!
(I really do need help!) My problem involves three tables. The first table is NAMES with an auto-number key field called NamesID.
The second table is a list of Dance Classes, called CLASSES again with an auto-number key field called ClassesID.
The third table is a list of MEMBERS in each dance class.
Obviously, the MEMBERS can belong to many CLASSES, and each of the CLASSES can consist of many MEMBERS.
My aim is to add a new record in MEMBERS by using a ComboBox containing records from the NAMES table.
On the form, I have a combo-box which shows me the list of CLASSES
(ComboClasses). I click on the class.
I then click on the NAMES combo-box, click on a name and want it to appear in the table of MEMBERS for the class shown in the CLASSES combo-box.
The problem
I am selecting the name using “ Select * From NAMES where Names.NamesID=[Forms]![FormName]![ComboNames] (supplied by supersubra) but how do I get the ClassesID into MEMBERS record.
At the moment, if I add a name that member appears in every class, or I have to manually insert the ClassID.
Philip
Hi,
I added some new controls into existing form. I made sure I added those new control names to Table source as well. For some reason, I dont get the values either in the form or in table. Please help. Thanks.
By the way, how can I attach an attachment in this forum. This if first time for me in this forum.
I have a cascading combo box working fabulously in a form. However when I embed that form into another form, the cascading combo boxes quit working. After doing some searching around on the web I think my issue is either in the query that the dependent combo box references and/or in the "after update event procedure" but I just can't seem to figure out the exact changes to make to my database. Details:
Tables with data for combo boxes:LOOKUP TABLE - Veg Species - Species Type,
LOOKUP TABLE - Veg Species - Species Name.
Related together based on common field: SpeciesType
[code]...
When the form with the combo boxes is embedded as above, I can select the species type from the dropdown but when I try to select the species common name value I am asked to
"enter parameter value - Forms!SUBFORM2a - Enter Specific Veg Info!cmbSpecies_Type".
I have a report that gets its data from a query. I need the query to run before the report based on criteria based from two combo boxes on a form.
View 3 Replies View RelatedI am creating a query that should filter records of events based on multiple fields. The filters should work with any combination of field criteria, but only two of the four field are working properly, as follows:
1. a text box for searching with event name (free text) - this is working;
2. a combo box to filter events by country name - this is working;
3. a combo box to filter events by event's keyword (category) - this is NOT working;
4. a combo box to filter events by year - this is NOT working
I have a user form with six different dropdown boxes. I would like to create a query that gets its criteria from users selecting values from one or more of these boxes.
I have tried:
[forms]![frmName]![comboboxname] or [forms]![formName]![comboboxname] is null
in the corresponding query fields and get a "query is too complex" error message, even when only selecting one criteria.
What am I doing wrong?
I managed to get separate combo boxes to filter out results on a query, however now I have a slightly different problem.
I managed to get the combo boxes to filter records in different query criteria, i.e criteria A for field A, criteria B for field B, etc.
Now I would like to have several combo box filters in one criteria field, however no matter how much I try to move the code about, they either filter out nothing at all, or show up blank records as they're filtering one after the other, i.e filter for A, and then B, which clearly won't work as there will be no B if you've already filtered for A.
The code I'm using in each criteria box is;
Like "*" & [Forms]![MyForm]![Combo1] & "*"
and this works as a single criteria in a single field.
I have a table with all information on it, that is input via various forms, I then have different queries pulling information from all information to run reports off. These all work fine, my problem is my 'Search Form' - below
I have created a query that finds information from 'all information' using
Like "*" & [Forms]![SearchAll F]![txtDateRasied] & "*"
This is working on all text boxes, It only half works on the combo box's when I use
Like "*" & [Forms]![SearchAll F]![combofailureanalysis] & "*"
If a selection is made in the combo box the query brings the correct results, however, if all the fields are left blank it should bring up every record, but it doesn't do this. I am certain it is the combo box's that are causing this anomoly as when I remove the combo box criteria it works perfectly again.
Ok so im working in MS Access 2007.
I want to create a query based on 3 combo boxes but have it so that if the field in the second or third combo box is not populated the query still runs.
Right now i have the Criteria set for the three columns that i wish to sort by as seen below.
Column 1
Criteria: [Forms]![Entity Selection Form]![areabox2]
Column 2
Criteria: [Forms]![Entity Selection Form]![devbox2]
Column 3
Criteria: [Forms]![Entity Selection Form]![entitybox2]
This gives me the correct query result but im forced to make a selection from each combo box. Is there a way to progamme it so that if I only make a selection from the first combobox and leave the others blank i can still get results in a query?
I have strange issue when creating auto populated text boxes which displays rows from combo boxes.
In one database auto populates works with simple text box Control Source edit "=[ComboName].[Column](NumberOfColumn)".
Somehow same method doesn't wotk in different database: here one time I have to insert VBA code at On change Event:
Me.TextBoxName = Me.ComboName.Column(NumberOfColumn)
And other time it wont work with On change but only with After Update Event (code is same).
Another thing this morning happens was that when I tried to add new record trough form where combo box and tex boxes are located, MS Office suddenly stopped working after selecting combo box selection (with message Microsoft Office has Stopped Working). It is 2013 version.
I got it work after deleting and re-inserting VBA code to autopopulate text box at After Update Event.
I currently have 3 tables within a database with student details of three different classes. I need to create a user form that has a dropdown box which I can select a student from one of these tables with a number of text boxes below which brings up all the students details, then once the student has been selected and the correct details are shown then I need to create a button which allows me to move that student from one table to another.
View 4 Replies View RelatedI have a form with a check box among other itmes. What I want to happen is, when the user checks the check box, I want the text box to the right of it to be made visible and to let the user write text. But I only want this text box to be visible when the check box is checked. The check box is if the user wish to put a comment in the form, he will click the check box and then I want my text box to appear so that he may write the comment in the text box. Please help with this. Thanks
View 3 Replies View RelatedI'm wondering is it possible to create a multiple parameter query which will return results even if you leave some of the parameters blank ?. I'm trying to set up a Form which will allow users to select parameters using combo boxes but at the moment you need to fill them all in or you'll get no results...
View 10 Replies View Relatedthere is a way to convert multiple text boxes to combo boxes all at once, rather than right clicking on them one at a time, and selecting Change to.
I have a form with about 50 fields and most of them need to be converted to combo boxes. I'd always done it manually one at a time up to this point, but I'm trying to build up my learning and look for smarter ways to do things.
im trying to enable/disable checkboxes based on a combobox selection for instance,
i make the selection in a combo box called terms and conditions. i want it then to only enable the business,domestic and summary check boxes for that type, with the onther check boxes staying disabled. is there a way this can be done through code like the statement "only enable if this letter type selection has been selected"
I have a form with combo boxes that works beautifully, but I've been asked to add another feature to it. It requires adding a button that runs a query and displays the query results on the screen.The query code is:
Code:
SELECT DISTINCT Product.MSDS
FROM Product INNER JOIN tblStoreProducts ON Product.[ProductKey] = tblStoreProducts.[ProductKey]
WHERE (((tblStoreProducts.MaxUnits)<>0) AND (([Product.HazardKey])<>79))
GROUP BY Product.MSDS, tblStoreProducts.StoreKey
HAVING (((Product.MSDS) Is Not Null))
ORDER BY Product.MSDS;
One of the existing buttons on the form has this code behind it:
Code:
' btnHMIS_Click
Private Sub btnHMIS_Click()
On Error GoTo Err
If IsNull(Me.cboCompany) Then
[code]....
As you can see, the button is able to pass the parameters (which Company, and which Store within the company) to the report.
Code:
' btnMSDSSheetsPrint_Click
Private Sub btnMSDSSheetsPrint_Click()
On Error GoTo btnMSDSSheetsPrint_Click_Err
[code]...
How do I pass the StoreKey information into the query? Is it my query that's wrong?
I have a form with cascading combo boxes pulling from a table. They work perfectly, no worries. My problem now is if I do not enter information in every combo box (i.e. only two out of four combo boxes), how can I still run the query and get the appropriate information?
For example (these are my combo box titles in order):
Product
Type
Customer
Contract #
I don't want to necessarily look by Contract # all the time, but sometimes just by the general Product and Type to get a larger view. How do I set up expressions/criteria in my query to accurately produce that information? Right now it just produces a blank query table if I don't fill out all the boxes.
I've tried a couple of expressions with "isnull" criteria, but I must be doing it incorrectly.
Help! I'm designing a database for my A level project at college and I just can't get this one section to work. I've spent alot of time linking things up so that you can't double book one of 4 rooms. It's a booking system for a recording studio. The thing is I have 3 basic packages of equipment and you can only choose one for each booking. The price is diplayed at the bottom of each package. I want to be able to check a box and then I want this price to be added to total price. I cannot link update queries to a check box I've tried every songle way I know. I'm not too familiar with access either :S. One more thing, I want to be able to tick a box which says Discount and then I want this to update the total price field again so it is multiplied by 0.9. I have manage to figure this out in an update query and it is also based on the fact that a band has made a deposit that is bigger than £0.00. I just cannot link it to the form.
If anyone can help it'd be much appreciated, I'm panicking too much over this project.
I have a table and in that table I have multiple columns one being check boxes and another is the description. There are others but these are the relevant ones. I filter under description for HR Payroll but this description is not uniform. After HR Payroll it could vary so the description is not always the same. I want to select all check boxes under this description and was told use a query no clue how to do that though.
View 3 Replies View RelatedAnother quick request:
What would the code be for a button which clears the contents of a text box or a combo box on a form?
Many thanks,
Paul.