I've got a table with football players, each player has a name, id and a value. The value gets updated everytime the player has played a match.
I don't have a rank field, and lets assume it's not possible to add it.
I'd like to get, not the "top" players but the players from, say rank 10 to rank 20. What I do now, is I get all the players (ordered by their value) and then loop thru the resultset.
Code:strSQL = "SELECT * FROM player ORDER BY player.score DESC;"rsPowerbabe.Open strSQL, adoConFor i = from_rank To to_rank Response.Write (rsFootballPlayers("name")) Response.Write (",") rsFootballPlayers.MoveNextNext
I think it would be more effective, if I could let access do the hard work..
I have set up two queries to generate a rank order based volume generated. The query does what I want for the most part in that if two parties have the same volume, they have a common rank (this is what I want to have happen). The problem comes that at various points throughout the data set, some of the rank sequence will be skipped...example, rank 265 to 267 (skips 266) and rank 786 to 790 (skips 787, 788, 789).
How can I close the gaps?
Here are the two queries...
Query 1 SELECT VolRnkALL.group_code, Sum(VolRnkALL.avg_group_volume) AS SumOfAvg_Group_Volume FROM VolRnkALL GROUP BY VolRnkALL.group_code ORDER BY Sum(VolRnkALL.avg_group_volume) DESC;
Query 2 SELECT qry_SetRankSTEP1.group_code, qry_SetRankSTEP1.SumOfAvg_Group_Volume AS Expr1, (SELECT Count(*) FROM qry_SetRankSTEP1 t1
WHERE t1.SumOFAvg_group_volume >= qry_SetRankSTEP1.SumOFAvg_group_volume) AS Rank FROM qry_SetRankSTEP1;
I want to know if it is possible to get an output that adds a ranks the CompanyIds by average cost per each policy #.how companyID24 ranks, and I have the query set up where it only outputs Policy#'s that company 24 is ranked in (has sold product in).
I have a query which brings back the following columns:
YEAR; PERIOD; STORE; PRODUCT; GP.
The table it is referring to is called 05_FULL_TABLE and I have changed the Alias for this table within my query to 05_FULL_TABLE1.
I'm trying to add a field which will rank the products by GP (Highest GP=1), within each group i.e. the rank starts from 1 again every time you hit a new year, period, or Store.
I've taken a suggested method from Microsft Support: http://support.microsoft.com/kb/208946 Seniority: (Select Count(*) from Employees Where [HireDate] < _ [Emp1].[HireDate];)
and changed it to: RANK: (Select Count(*) from 05_FULL_TABLE Where ([SumOfGP] < [05_FULL_TABLE1].[SumOfGP] AND [STORE_FKEY] = [05_FULL_TABLE1].[STORE_FKEY] AND [YEAR] = [05_FULL_TABLE1].[YEAR] AND [PERIOD] = [05_FULL_TABLE1].[PERIOD]) +1)
It is adding a rank, but it is not starting the rank again at any of the changes in store etc (which are all sorted Ascending in the query result), so I guess my "WHERE" clause isn't right. Can anyone suggest where I've gone wrong?
I have a table which has got the following fields: Name and Points
I want to create a third fieldw with the name of rank which should give automatic results of rank that is the one with the maximum points should have '1' written in his rank column. Similarly, all rank fields should be filled accordingly. I used the help, it said i should apply the syntax. I do not know how and where to apply that syntax Your help is appreciated [HassaaN]
I used to do this in oracle using RANK function. I do not know how to do this in MSACCESS
SELECT Tax_ID, Tax_Name, Start_Date, Tax_Percent, RANK() OVER (PARTITION BY Tax_Name ORDER BY Start_Date desc) as Date_rank FROM TaxType where start_date<=to_date(10/01/2010, 'mm/dd/yyyy')
I am trying to run a simple update query to copy data from one column (Addrl1)to another column (Working_Addrl1) within the same file and I can't for the life of me figure it out. Then I need to repeat for addrl2 and addrl3 to working_addrl2 and working_addrl3.
I have created a cross tab to extract pipeline and sales for Q1 2014, Q2 2014, Q3 2014 & Q4 2014... the user can select the quater from a multivalued text box...
Now for the final output, have created another query which pull the above four quarter in each column from the cross tab...now the problem arises when i change the quarter to Q2 2014, Q3 2014, Q4 2014 & Q1 2014..it gives an error "Microsoft office Access database does not recognizes "Query name" as a valid field name or expression".
The error is because the second layer of query does not identifies Q1 2014.
How do i make access change the column automatically when the Q1 changes to Q2...
I am looking to add a column in a query that will give a Y or No to previous column data if it contains TEXT or NUMBER (It could read "TEXT" or "NUMBER" or even Y for text or N for number).
I have a competition ranking contestants. A contestant can compete multiple times, each time with a unique registration number.
I am trying to sort by score to rank the contestants, however the contestants can only receive one rank - their highest score (not a sum of their scores, only one score). ? ?
Example: Registration Name Score 2345 Sally 247 3456 George 230 4672 Sally 255
What I want to see: 4672 Sally 255 3456 George 230
I am developing database for my school. I am done with everything except the examination aspect where i need to indicate students position in every subject beside their overall position according to the sum of all the subject scores. How to indicate student position in subjects.
In the organisation that I work for employees get paid every 2 weeks on a Saturday. So for this financial year the pay period end dates have been 08/07/2006, 22/07/2006, 05/08/2006 etc
I have a column in an Access table listing various dates. I want the next column to be populated with the next pay period end date after that date.
So if DATE is 05/07/2006 I want PAY PERIOD END to be 08/07/2006 and if DATE is 09/07/2006 I want PAY PERIOD END to be 22/07/2006 etc
I need to input a string into a column named "EventType". The code should first check if the column "Agent Name" contains any strings. If there is none, it will input "IBM Director" into the EventType column.
Once it has looped through the agent names, the code will then loop through the Details column and input into EventTypes based on what is displayed within the string.
These are the codes that I am using to achieve this, however nothing is being input into the EventType column.
Code: Private Sub Command11_Click() Dim dbs As DAO.Database Dim rst As DAO.Recordset
Set dbs = CurrentDb Set rst = dbs.OpenRecordset("Final")
[Code] ....
I think the problem lies with the code that checks the agent name. When I removed it, it managed to populate the EventType column based on the details. But I still need to find out how to check the agent name too.
i have a columns as 1. contactname, 2. firstname 3. lastname 4. email and in this columns some emails are not matching with the contactname or some time firstname or some time lastname so i need the to find out the un matched contacts from the database.
I'd like to add a new column in access query (see attached) that within the same batch if there is a "f" in the "passOrFail" column, then in a new column put a "f" for the whole batch, otherwise put a "p" for the whole batch.
Normally, with a multiselectquery you type in several criteria(postal code) like; 3311 aa 1245 bb 1234 bc
which is all very well, but what if you have 100 postal codes (dutch postal codes and without a logical order). In this case it would be nice if you could use a table with one column (the postal codes) to use as criteria.
im wanting to reference a value of a dropdown which is already serving a function - the dopdown already has it's bound set to 3 but i want this new function to refercne the second column-
im tyring:
"Tutor = '" & Me.ComboStaff.Value(2) & "'"
which isn't working- how do i reference the second column of a dropdown if its bound to its third?
Hi. I have a question I'm hoping someone can help me with. I would like to take data from multiple columns and put the data into one column. Additionally, I do not want to exclude any data (union all) and I would like to group the resulting union by another field. For example:
So far I'm using the following SQL. What do I need to add or change to get my desired result of grouping the unioned depths by the 'sample event' field?
I appreciate any help anyone may have to offer. Thank you.
SELECT Depth1 AS Depths FROM Depth_Velocity_Substrate_Correct Union all SELECT Depth2 FROM Depth_Velocity_Substrate_Correct Union all SELECT Depth3 FROM Depth_Velocity_Substrate_Correct Union all SELECT Depth4 FROM Depth_Velocity_Substrate_Correct Union all SELECT Depth5 FROM Depth_Velocity_Substrate_Correct
