Over the past three months I have been trying to develop an application which can repeat appointment entries.
I would like to have the option to repeat an appointment entry for a given number of weeks.
For example if an appointment entry was placed for today (Wednesday), there would be a command to create additional duplicate enties for the same day of the week for a given period of weeks ie say every Wednesday for the next 52 weeks.
Any help on how I could approach this would be very much appreciated.
I have created a database in Access XP (2002). In a nutshell, the database records numbers of people attending a seminar; which can take place any number of times per week, and so hence can take place any number of times per month.
I have set up the query so that it can run immediately after a seminar to show the attendants who attended the seminar on that current date "Date()" in the criteria box. However, how would I go about setting it up so that it shows who attended every seminar in the current week or month?
Hello all, I need your help please, i have a Form that also has a Subform in it. I need to create a Text box on the form that will display a number which will reflect the total enties made against a particular ID within a rolling six month period using the system date as a perameter. The number shown will only reflect previous entries made that fall within the six months from the current system date, and will need to update once new entry is made. Incase i have confussed the hell out of you, let me give you an example:
Example One
Entry made today = 24/02/08 Previous entry Date = 20/10/07
Textbox on Form = 2
Example Two
Entry made today = 24/02/08 Previous entry Date = 20/08/07
I have a working dB which can calculate a shift duration and sum total all shifts worked within a period for the purpose of producing a labor report for payroll. I have successfully used the DateDiff function and converted the minutes to HH:MM on my form and reports. Now I want to calculate elapsed time for a specific period within a shift, I'll call it OtherHours and I am aiming to calculate a portion of time that meet the following conditions below. I am using field names of [PunchIn] and [PunchOut] and both are of type General Date.
IF [PunchOut] ISNOT Saturday,Sunday EXIT FUNCTION ELSE IF [PunchOut] ISNOT Between Midnight and 0559 hours EXIT FUNCTION ELSE DATEDIFF ("n", <MIDNIGHT>, [PunchOut])
My thoughts are to solve the DateDiff portion and then figure out how to apply the conditions within the IF statements.
How do I enter and store a period of time that may be of any length: years (.. unlikely but ...), days, hours, minutes, seconds (or even micro seconds) that I can later add to other dates or times stored in my database? How do I create a sensible data entry mask for yyyy/ddd/hh:nn:ss.999 and then convert this to a field compatible with date/time functions? And what format should this data take (be converted to ..?) and be stored in?
Can you help we have a data with a list of jobs that scores points, I need to build a query or scirpt that will add 5 points every 30 day fro the date the job was submitted this will help old jobs come the top of the list.
We sell products out of vending machines and once in every few days (time span between readings may be different every time) read data from the machines using flash drive. Each reading from all machines produces an Excel file:
The only date that we have is the day on which the data has been read and this tells how many sausages were sold from the date of last reading till the date of current reading (after each reading counters are set to zero).
The problem is to get average amount of product X sold from machine Y on every calendar day. For a total rookie like me it seems like creating another column that would divide the Amount_sold by the number of days between two consecutive readings and put this average amount for every calendar day between these two readings. May it be done this way? How? Another way? How? I would be very grateful if anyone could help me and explain the solution in an accessible way.
I have designed an access application that logs emails that come into a department. However, the team leader has asked me to create a report to work out if emails were answered within a 24 hour period.
Is there a method to do this. It is not something I have attempted to do within access before.
I am using access 2013 and have an issue creating a query with employee hours for a two week period.
For starters I have a table with the following:
Employee Number, Date, Time in, Time out, Description, Rate Code, Week end, Pay Period. (there are a couple others but they are not needed for the query)
My table is set up this way so that each employee can clock in and out 1-4 times a day based on what they are doing. For example I may work from 6-8 in the office then 8-10 in the field. The office has one rate code and the field has a different one so i cant just be clocked in from 6-10.
At the end of the pay period I create a report and send it to an accouting firm who does the payroll. Right now I have to manually enter in each employees time. I was hoping that by using this table I could create a query that will give me the calculations I need in order to create the report.
In my query (to Start) I need to have the following with it set up per pay period.
Employee Number Rate Code Regular Hours Overtime Hours
How to set it up so that it calculates the hours based per rate code with the given pay period.
What I am currently doing is querying a table for the Count(*) for the day before. This works all well and good, but now I am wanting to break it down by a time range from the trDateDT field.
I've been struggling with getting a report to simply count records (I don't need any detail other than the counts). Here is what I have:
Table CompressorRoundsT contains these fields (many more actually but these are the ones I care about for this purpose):
Date, Shift, Round
Possible records in the shift field are 1st, 2nd, 3rd and the round field has Rnd 1 and Rnd 2.
For each date, I need to count the number of records per shift and per round. For example, the report should show that on June 7th, 1st shift has 14 records for round 1 and 14 records for round 2. Same for 2nd and 3rd shift. I don't need any other details of what the records contain, just the counts.
I've had some success but the layout ends up too spread out because it is including the individual records instead of just showing the counts and it isn't grouping the way I want.
It's a report for management to see how many readings (rounds) were missed in a period of time.
I have a table with 'General Date' column. So I have to create query wich extracts records between Last record (via Date field) and 'for example' 10 days before. But Last record in Date column may differ from Now().
When this is done I have create calculations with extracted records using agregate functions.
I'm trying to use Last function for Criteria putting it into Date field and substracting with -10 (for 10 days) but it doesn't work.
I have a pre-established database with a form that calculates total sales and tax for a time period i specify. I want to add a box that will display the number of sale records. Ex. if i had sales of 50,000.00, and that came from 200 sales i want the box to show the number 200.
I'm in the process of creating a database in Access 2010 that has two front ends, basically. What I want to be able to do is lock out one of those front ends for a specific period of time every day.
want to establish the criteria for a report to include 6 months (into the future) from todays date. Have tried dateadd function but this doesn't seem to allow dynamic (automatic) start of period date
I want code with message that can prevent user to adding a new record for an employee within specific of date through a form in the Ms Access database, but after a period of date i can, For example (after two months of the last record on the main table i can add the new record, otherwise the message will popup tell the user that this employee didn't complete tow months of last adding)
Hello buddies :D, do you have any idea how to make this work?
To select data that falls within this criteria of date range between cboDate and cboDate2 (fields on my form). The date in [tblJobDetails]![timeIn] come in this format "08/17/06 10:24 AM", but the cboDate/cboDate2 (takes in date only e.g 08/17/06) what i am after is to evaluate specific hard coded time in addition to the date entered, i.e. even tho, i haven't entered time on the cboDate/cboDate2, I want specific time hard coded where e.g If i select a date range of 08/17/06 and 08/18/06 on my cboDate and cboDate2 it should really be evaluating: 08/17/06 8:00 AM to 08/18/06 8:00 AM.
This is the criteria i curentlly have on my query in design view tha works perfect in selecting date only. ([tblJobDetails]![timeIn]>=[Forms]![frmPendingJobs]![cboDate] Or [tblJobDetails]![timeIn]>=[Forms]![frmPendingJobs]![cboDate] Is Null) And ([tblJobDetails]![timeIn]<=[Forms]![frmPendingJobs]![cboDate2] Or [tblJobDetails]![timeIn]<=[Forms]![frmPendingJobs]![cboDate2] Is Null) How can I incorporate 8:00am to 8:00am into my cboDate and cboDate2. What can i do to make this happen? Your kindness will be greatly appreciated http://www.naijaryders.com/forums/images/smilies/thankyou.gif
I've got a members table where my members pay an annual fee. The fee is paid 12 months on from when they originally registered. So, for example, 12 months from today, i would expect to pay my next annual fee.
Now, with different members registering at different times of the year, it isn't so straightforward. I would like my calculated field to indicate to me if a payment is required.Furthermore, I would like to include a '' date range '' so that the calculated field entitled ''Payment Required?'' shows yes for a fortnight. Here is my attempt at the expression which partially works:
PaymentRequired?: IIf((Format(Date(),"dd/mm")>= [RenewalDate] And Format(Date(),"dd/mm")<=[RenewalDateAdd14])Or ([Subscription Paid?]=0),"Yes","No")
i used the Format Date method. But i've got a case where someone is due to pay at the end of November...and today being teh 3rd of December.they should have a good few days yet to pay the fee (before teh aforementioned 14 days is up)
In my Access app I need to get the latest record added of an item from a MS Sql table and check the period between now and the date saved in the record.
So my guess is: Select TOP 1 * from tbl_StockItems Where StockId = Loc_StockId
I then need to check the days between tbl_StockItems.LastStockDate and Today.
How would I write an Access VBA query to give me the amount of days and put that number into a variable.
How do I set my table to sort all entries by time? I have Auto Date formatted for a date field but I have a time field that needs to be sorted in ASCENDING order so that any entries are sorted by time.
This is a phone log file that calls need to be returned in the order received according to our phone system.
I have a database with date and time each stored in a separate field. Now I want to query the database based on a start date/time and an end date/time. I started with the code below but it only returns events within the same time range on each day when what I really need is every event from a specified date and time through a specified date and time.
SELECT myTable.ID AS myTable_ID, myDate, myTime, FirstName, LastName FROM Staff INNER JOIN myTable ON Staff.ID = myTable.StaffID WHERE myTable.myDate >= #3/2/2014# AND myTable.myDate <= #3/3/2014# AND myTable.myTime >= #8:00PM# AND myTable.myTime <= #11:00PM# ORDER BY myDate desc
In the above example what I want is every event from 3/2/2014 8:00PM until 3/3/2014 11:00PM. But what I get instead is every event between 8:00PM and 11:00PM on 3/2/2014 and every event between 8:00PM and 11:00PM on 3/3/2014.
