URL...Essentially it seems like the format event fires only once with a docmd that has a where clause. If I print a single report it is perfect! Example one in the above post has a subreport, example 2 its very simply incorporated into the main report with no sub report.
View RepliesI have a report with several sub reports that run and fill a table conditionally. The third sub report displays the records from this table. It works perfectly.
If I print a batch of records, it also works perfectly - but only for the first record. Previously, I had another report with several sub reports where the visibility of objects were controlled - this worked fine in a batch. Every subreport had the correct visibility settings.
In this case, I have a similar design, but instead of setting visibility on the various subreports, I am filling a table based on data in the subreport. As stated it works great for the first one in the group, or any single print.
i have a database which has new customers added daily (currently we post all documentation)
when a new record is filled in the customer receives:
cover letter/invoice(report), book page(report) and a book (pdf, always the same) the reports are created from the record
rather than post all these documents i would like to email them to each customer in 1 email with the reports in pdf format.
Example:
CC (email feild from the record)
Subject (pre filled with "Stop Bullying Now! Books 4 Schools order")
Body (pre filled with "Dear ([Contact]if possible) Please find enclosed your documentation for your recent telephone order bla bla bla and our logo.jpg if possible)
then i would like to attach to the email the cover letter/invoice(report), book page(report) and the book (pdf) from the hard drive (r.eports changed to pdf)
if i can press a button on the form to send it that would be good.
if i could link it to a query to send a batch of them that would excellent.
The Database is Named: b4s.mdb
The table is called: Main Table
The input form is called: Client
The letter/invoice report is called: b4sletinv
The Book page report: b4sbook
The pdf book is located at c:Documents and SettingsAdministrator4sfinal.pdf
The query for the batch is called: coverlet&proforma
I have been an MS Excel man all along my career and I am a novice in MS Access.I have created a table, [Initial Customer Approval] which records data from a Form, [Initial Customer Approval]. Once the data is entered in the Form, I need to do some calculations based on the data entered in some of the fields in the form.I created 6 different queries for the six possible values in those fields. now for each of those queries I created respective reports.I placed a Print command button in the Form.
1. When I press the Print button it should open the report for the current record in the Form. (Currently It Opens all the reports simulatneously, with only one relevant report containing the current record; other opened reports being blank.)
2. If user presses the Print button before pressing Save button then system should prompt user.
Here is the code (Please note [reference number] is the unique ID generated for each record entered in the tabe through form):
Private bSaveClicked As Boolean
Private Sub Form_BeforeUpdate(Cancel As Integer)
If Not bSaveClicked Then
MsgBox "You are trying to navigate away from the active record. Please either save your changes, or press ESC to cancel your changes.", vbOKOnly + vbInformation
Cancel = True
[code]...
I am trying to produce a report that shows a single record that has fields in multiple tables. When these reports we're in Word form they were about 7 pages long. I put them in access to be able to update the data in one or more than one of them at a time more effectively. But now I am unable to get them print out one at a time like they looked originally in Word form.
View 1 Replies View RelatedI need to hide a row in my report for example (in Detail Format event of the report):
If me.txtReleased = "YES" then
hide row
endif
I'm currently working on a database which requires invoicing as a part of it. The invoicing is done based on quarters, and I want the users to be able to use a multiple items form, listing all of their clients, to create the invoices. Each invoice must be created individually so they can be e-mailed to the client, and saved to the clients folder. So I was wondering if it would be possible to create individual invoices for clients using a multiple items form.
View 1 Replies View RelatedMy report produces multiple copies of the same record. I know why, but don't know how to fix it.
EmployeeTable.
With a one to many relationship with TrainingTable (via employee PK as FK in trainingtable).
Training table has a one to many relationship with a table called Range.
Report is based on a query that picks up the Employee/Training/Range (range just describes the training unit).
However, If I have more than one range expressed organized a training unit, the report spits out several copies of the Employee record to display all the ranges.
I have a report that runs code in Report_load, and based on the value of a field it sets some objects Visible=False and others Visible=True etc..
Now I'm trying to move away from acViewPreview and print direct to the printer with acViewNormal but the Report_Load event doesn't run. Is there a different way to run that code when printing directly?
Hi All,
I am looking for some help with a project I am working on where I need to automatically print a report from my database every time a new record is added to the table. The table contains 13 fields and the report needs to display 12 of them, the other being the index which is set to Autonumber.
The table is being updated solely by ODBC, this is working OK.
There is the potential for records to be added to the table very quickly via the ODBC link, so I need to safeguard that the report is being populated with correct information from the record that triggered the print event. Also, should multiple records be added in close succession, a report needs to be correctly generated/printed for each of one. The DB is to have no user intervention, and will just run on the PC at startup with all access menus/controls locked out.
Any information on how you think I should structure this, or any examples of helpful code that you might have would be very much appreciated.
Thanks in advance, :)
Jon.
I am wondering if it is possible to send a report as xls file and keep the format exactly as the report looks.When I try to send it now, it automatically changes back to the column names from the table, which I in the report have changed and want to keep in my excel output!
View 3 Replies View RelatedI have a database of musical events. Now im creating flayers for each event. My Q is how the Information for each event should fit on one A4 page and should start on a new page of the report.
View 2 Replies View RelatedI have three reports that I have used as the subreports for one master report. The master report shows the three subreports on a page.
When one or more of the subreports contains no data the master report still shows the empty subreport. I would like subreports with no data to be left off the master report if this is possible.
For each of the individual subreports I have used the On No Data event to display a message and then not open the report if there is no data. This works fine for the individual subreports but when I open the master report the "empty" subreport is still displayed.
Is there a way to leave the subreport off the master report when there is no data in the subreport?
I have a main Form "Client" that shows details such as Representatives, phone numbers, status, etc. I also have a main report "CRM" that is a nicer summarized table version of all of my Client form entries.
The "CRM" form will be used by others in my office to see what clients we are contacting, etc. What I want to be able to do is have someone open the CRM form first. If they want to see even more specific info (not everything is included in the report, as that would be too messy), I want them to be able to double click the Client's name on the report and be taking to the corresponding entry on the Client form that shows more details.
Right now my code for the Report which is not working is the following:
Private Sub Client_Name_DblClick()'double click on a client name in the reportDoCmd.OpenForm "Client", acNormal, , "[Client_Name]='" & [Client_Name]'this should open the Client Form to the record of the same client that was double clicked on the reportEnd Sub
I have a report which is accessed via a hyperlink in a form. I have the default view for the report set to Print Preview yet everytime I click the link the report opens in report view which I don't want.
The event for the hyperlink is as follows:
Private Sub cmdPrint_Click()
Dim strWhere As String
If Me.Dirty Then 'Save any edits.
Me.Dirty = False
End If
[Code] .....
I have tried changing "acViewPreview" to "acViewReport" and "acViewNormal" and each time it is either going straight to print or opening in report view. I just want the report to open in print preview mode so I can decide if to print a hard copy or send to pdf.
can't find how to add today's date to a report formatted as "August 30, 2014." I can't understand why that's not one of the options when inserting a date.
View 3 Replies View RelatedI am inserting a logo in jpeg format to a report. unfortunately the logo comes in very large. the frame around the logo can be adjusted but the image does not; it remains large.
View 5 Replies View RelatedI have the following code in the On Load of a report which shows multiple records:-
Code:
If Me.PaymentType Like "Debit/Credit Card" Then
Me.Check94 = True
Else
Me.Check94 = False
End If
This ends up checking all check boxes in the report if any have "Debit/Credit Card" in the PaymentType field.What I wanted was to tick Checkboxes for those records where the statement was true, and not tick those where it is false.Do I need the code in the On Current event? Or do I need more sophisticated code?
I have a blank report and dragged two queries to it so that they are displayed on it. Both queries prompt for a Customer code. How do I get it that I only have to type it in once rather than for each query prompt?
View 3 Replies View RelatedI can't seem to find a way to SUM two seperate columns on my report. I've attached an example of what I am talking about. I was able to add the SUM feature to the 'Estimate' column, but it doesn't allow me to add that to the 'Plan' column too. The only options available are Count Records or Count Value.how I can have these both SUM seperately within their columns?
View 5 Replies View RelatedWe have a database that has around 30 queries that are ran on a monthly basis. They all have unique criteria (but there is a crossover of fields that are used), and are all set up so they show only the previous month's data (the date is taken from one date field for some queries, and another date field for others).
We run the queries, and only need the 'count' of number of records that fit the query each month.I was wondering if it is possible to create a report that will run the queries simultaneously, and show the 'count' of the query results in predetermined fields.
I have several reports that creates price sheets for all of my customers. It is a report with multiple subreports within, and I am trying to create a process to seperate them and export them all into [Customer Name].pdf. I have tried to scrap some code together from various forums, and it has been unsuccessful.
For example, one of the reports "rptPriceSheetQuarterly", has a field "txtCustomerName", that feeds the queries for the other subreports. I would like to create a new PDF when that field changes.
I understand I need some sort of looping code that will cut the report up dump them all into one folder, but I am totally out of my element here.
Here is my delima, I have a report that I am able to type in a keyword and it will pull up that report exactly as I type the keyword, however, let's say that I want to pull up someone else's report I cannot. I have to exit out of my report and then go back into it and resubmit the new search.
View 13 Replies View RelatedI am in the learning phase for MS Access reports. I have a datasheet which contains the employee daily activities.I need a report when either or both criteria is selected. For ex..criteria1 is Start date and End Date and criteria2 is Employee Name.Output of the report should be based on the selection of the criteria ,as I said either or both.
View 3 Replies View RelatedI would like to ask about on how to display my attached pictures to my report. I'm using MS Access 2007 and I have a table names:
Projects - ProjectID, ProjectName, StartDate, EndDate;
Task - TaskID, ProjectID, TaskName, Pictures;
Picture datatype is Attachment and it is multi-valued field so I created a query to extract picture per ProjectID and to be used as a Subreport. Query results shown below:
ProjectID Attachment
11 tulip.jpg
11 hill.jpg
10 panda.jpg
10 shark.jpg
Now, I have created the sub report and linked it Project table. Result is the pictures add up vertically or downward where there is a big space on the right side, I want to have it from left to right or horizontally.
I'm trying to print out several reports from one button. I have created individual buttons for each of the reports and they work fine.
But when I try to amalgamate them it stops printing after the first two reports regardless of which ones are at the top of the list.
The code I'm using is ......
Private Sub Print_All_Click()
Dim strFilter As String
strFilter = "Business_ID = Forms!frm_Business!Business_ID"
DoCmd.OpenReport "rpt_Front_Page", acPrint, , strFilter
DoCmd.OpenReport "rpt_D_and_N_Suitability", acPrint, , strFilter
[Code] .....