I created a report that only has gridlines around the outside border of the entire report (rather than around each record). I want the grid line style on the last/bottom record to be solid so it boxes in all the records. When I change the "Gridline Style Bottom" for the records, each record has a bottom gridline rather than an outside box around all the records.
View RepliesI am using Access 2003. Is there any way to put grid lines among fieldnames and contents just like in Excel in the output of subreport?
View 1 Replies View RelatedOk, I have pesky solid line at the bottom of one field (bottom of the field with 6.80 in it..
I cannot figure out where it has come from or how to get rid of it!
Here's the properties for that particular field...
When I delete the column it appears somewhere else...
How can I display multi images on 1 page as a grid view in access report...
View 5 Replies View RelatedIs there a way of formulating statistics at the bottom of a report?
Heres what i have.
The report pulls Rank, Last Name, First Name, Assigned weapon, Weapon qualification date. After 6 months i use conditional formatting to highlight the soldiers qualification date red. Im in the military that's why im tracking all this, but I need figures to report to higher, and at the bottom i would like it to show, "#Qualified", "#UnQualified","% Qualified", "% Unqualified", "#Expired","%Expired"
I have a sub-report and the last row is highlight, however, there seems to be extra spacing after the last row. I removed all report/page header/footer so all what's left is the Detail section but I still have this white space after the last row.
View 5 Replies View RelatedHere is a project. I have a grid on a form. its width is 20cm wide and 15cm tall. in the grid are 6 groups of columns (all columns listed are from left to right).
Group 1 - 5cm wide - description
Group 2 to 6 are 30cm wide and represent days. Each group is split into 8 columns which represent hours per working day.
I need to to draw or position a line over the grid depending on what day it is and time. for example, lets say its thursday at 14.30. ( the 8 hour columns run from 8am to 4pm ) it would need to look like this-
So I need to work out the position of of the line depending on the time of of the day in the week. The day can be determined by the column header, the time by the grid....
using Access 2000.I have a table with fields (image, info1, info2, info3).I want to produce a report where 15 records are displayed in a table like manner. each table cell contain the whole record and the table is 5 rows by 3 columns.
View 4 Replies View RelatedI want to have line item numbers on report look like this:
Number....Order Number
1............9533-1425-20
2............5866-3411-14
3............2332-2355-14
3............2332-2355-14 ->repeating item
4............4399-5208-12
5............7392-2305-62
5............7392-2305-62 ->repeating item
6............2332-2355-14
Each new row of record needs to have their own line item number starting from 1 with criteria if order number is the same then carryover line item number on that record. I know how to get line item starting from 1 to last by assigning unbound control field with entry "=1".
I created a form with a memo field. Data is entered. How do I get the data to print on the report on separate lines rather than one continuous paragraph? For example: Entered in form:
2/1/15 visit to house. 2/2/15 ordered new locks for doors. 2/5/15 Locks installed.
Print view on Report:
2/1/15 visit to house.
2/2/15 ordered new locks
2/5/15 locks in stalled.
I have a database and one of the functions is to track the purchase of fuel. Part of purchasing fuel is registering what the current odometer reads. My query gets the Vehicle ID, Date of Transaction and Odometer reading. I want to show a report that shows how many miles the vehicle is has traveled for a certain amount of time. If it's for 2013 then I'll put the criteria for 2014 in the date. This will give me a list of all vehicles and their odometer readings. I then sort the date by ascending.
In the report I group on vehicle ID and then I want to show all their transactions and add up how many miles were driven.
Vehicle 1
1/2/201
1/5/2013
1/15/2013
ETC...
Total Miles Driven in 2014: XXXXXX
I have a main report / subreport relation, just want to have a fixed length of each printout. e.g the total number of lines of the subreport should be 8 lines. However, lots of subreports contain records less than 8. I would like to know how to insert of blank line in the subreport depending on the records with content at each print, in order to make the total number of lines in each subreport is 8 each print!!
View 1 Replies View RelatedUsing a Microsoft Chart Object 6.0 in an Access 2010 report. It's easy enough to do the basics and that chart responds to data.In my case, I have 12 lines, or columns, being controlled by data. It responds to the data. just fine. What I want to do is control the line weight and colour of each line through VBA.
You can click on the chart itself on the report form, but formatting the line you actually want is almost impossible. Pretending we can, you get the pop-up configuration windows and the TAB "PATTERNS". Under that, you can select "LINE" and then choose the style, color and weight. This is what I need to do in VBA.
Lines like this do not work:Graph_Data.Columns("A").Line.Weight = 5
or...
objDataSheet.Columns("A").Line.Weight = 5I tried a variety of versions of that and am pulling my hair out.
Hi,
In my first steps working with Access I feel unable to find out how can I create a report that shows the data (records from a Clients Table - Name, Phone, e-mail fields-) in a "spreadsheet like" format with gridlines. Can anyone help me on this?
Thanks
I have reports that total the figures in a column and displays the total at the bottom of the column. I would like to display the total at the top of the column since the length of the column continues to grow and I would like to see that total before scrolling down to view the various individual entries.
No matter how I try the =count(x) always shows an error. Is it not possible to display the total figure at the top of a column instead of at the bottom?
I am using MS Access 2003.I have a report whose Detail band contains a zero-height Comment field positioned at the bottom of the other single row of fields. It has Can Grow = Yes, so it sits waiting to grow if there's any data in this Comment field.
However, when this report prints, if the Comment field just "happens" to straddle two pages, it gets positioned only on the first page and gets cut off in the process. (See attachment 2.) Ideally, the entire field should display on the second page instead.
If I adjust the margins in Page Setup, I can fix this on this particular report. However, depending on the data being reported, these new margin settings can create a problem for the same report with different data. (All depends on where the Comment falls.)I'd like the report to work consistently, no matter the data or margins.
I have a report which is grouped by employee number - each group can have one or many records displayed - it works fine, but can look untidy sometimes when there are more records than will fit without wrapping onto another page; this is particularly prevalent when there are two or three groups - the third one may run over onto the next page, without group headers.
Is there anyway to force a page break at the bottom of a group if that group is not going to fit on the current page in its entirety?
I have been an MS Excel man all along my career and I am a novice in MS Access.I have created a table, [Initial Customer Approval] which records data from a Form, [Initial Customer Approval]. Once the data is entered in the Form, I need to do some calculations based on the data entered in some of the fields in the form.I created 6 different queries for the six possible values in those fields. now for each of those queries I created respective reports.I placed a Print command button in the Form.
1. When I press the Print button it should open the report for the current record in the Form. (Currently It Opens all the reports simulatneously, with only one relevant report containing the current record; other opened reports being blank.)
2. If user presses the Print button before pressing Save button then system should prompt user.
Here is the code (Please note [reference number] is the unique ID generated for each record entered in the tabe through form):
Private bSaveClicked As Boolean
Private Sub Form_BeforeUpdate(Cancel As Integer)
If Not bSaveClicked Then
MsgBox "You are trying to navigate away from the active record. Please either save your changes, or press ESC to cancel your changes.", vbOKOnly + vbInformation
Cancel = True
[code]...
I have some columns with hours. I want to simply display the total below each column. I would like to do this in the query results and in the reports that I create.
View 1 Replies View RelatedI have a report which shows the results of two separate queries in a simple table view.
One set of data varies in size depending on the amount of records and the other is a fixed size and never changes.
I'm wanting to make my report always show the fixed size data in the bottom right corner of the page when its printed.
I've tried putting it in the footer section of the report but don't want it to affect the size of the details section and just show next to the other query results.
Is this possible and if so how would I achieve this?
Apologies if this is an obvious one but is it possible to hide this:
"Record:1 out of 34" and the arrow buttons at the bottm of a form(s)?
I would rather use my own Next Record and Previous Record buttons so it would dieal to disable/hide these arrow buttons.
Many thanks for your assistance in advance,
Paul.
I got a form / subform relationship.how to locate the bottom record, when the user after some queries input at the main form. I desire to display the bottom end record (EOF), instead of some sorting and display the last record at top of the subform!!
View 11 Replies View RelatedIs there a way to have a datasheet open with the last record at the bottom of the page? I now have it opening to the last record, but it has the last record at the top and can't see the records before it without scrolling.
View 2 Replies View Relatedhow do i select one record from a subform and open it on a report ?
View 2 Replies View Relatedmy ive made a query to base my report off the only issue is the ' timeslot' wont appear on the report.
the timeslot needs to be displayed on the time the customer booked their appointment...
I have a report, which opens a dynamic search form (built off of John Big Booty's code from this site). The form opens, and works as expected.During the dynamic search form testing, I created an 'OK' button that opens another form to display the record, but the dynamic search was opened first.
I would like to reprogram the button to display the selected record in the report which opened it.How can I get the selected record to display in the already open report?