Reports :: Only Display Specific Number Of Records With Multiple Filters
Mar 10, 2015
Is it possible to only display a specific number of records with multiple filters of the same field.
So say I have a table with 2 Columns:
Name
Address
Can a user basically search for multiple records based off of their names? Maybe by using a form where they can input those names like this:
John Smith
Dave Richardson
Sophie Parker
Then the report will only display the records containing those names.
View Replies
ADVERTISEMENT
Jun 20, 2013
I have a WO Table and a related WO Procedures Table. I would like to add a specific # of blank lines/records between each record but that # will vary. So the report will show the WO Procedure Desc then a specified # of blank lines below it and then the next WO Procedures Desc then a specified # of blank lines below it etc.
I thought to add a field to the Proc tbl called #ofLines and whatever number was entered would be the # of blank lines to appear below the record on the report.
View 3 Replies
View Related
Apr 26, 2015
I have created a report which contains within it multiple sub-reports, which I use to generate a document for management meetings on a bi-weekly basis.
For each of these I have the subreports filtered to a unique number for consideration that period e.g. LIKE "88/00039" which relates to my data.
In order to change this I have to manually update each of the filter commands within the subreports but I assume there must be an easier 'catch-all' method of achieving this?
Ideally I'd be looking for a command prompt so I could enter just the number sequence e.g. "88/00040" and then enter this (via a corresponding macro or similar) to update the filter commands.
View 2 Replies
View Related
Jul 28, 2015
I am trying to link 2 reports so that when a user selects a field in the 1st report it will only return records specific to the filters. I have used the following code via a field in a report to return records in a seperarte report using 1 filter "BudgetPool". What I need to do is add a second filter "ContratorType" to the code to allow the second report to refine the records.
Private Sub BudgetPool_Click()
DoCmd.OpenReport "Budget Expenditure by Pool per Project Type", acViewReport, , "BudgetPool=" & Me.BudgetPool
End Sub
View 3 Replies
View Related
Sep 2, 2013
Using one form with multiple combo boxes on the basis of which am trying to generate a report. Below is the code I've put in a command button (in Form) by which I want to generate a report....FYI - both combo boxes have text value...
DoCmd.OpenReport "MatrixBy_Member", acViewPreview, , ("full_name = '" & Me.Combo5 & "'") And ("frequency_description = '" & Me.Combo7 & "'")
View 3 Replies
View Related
Apr 12, 2005
Hi to all,
I developed a database where I keep all the problems that I face and their solutions along with its category.
Now I want to have a form that when I choose each category, I should have all its records.
I heard that I should implement this by using a subform but I couldn't manage. With a search at the topics I've seen that I should use a macro but I don't know how to implement it.
Possibly after the lookup field I should have an After Update function but how can I connect it with the subform?
ex. at category "hardware: floppy" i have 2 records and i want to see only these, and when i choose category "hardware: hard disk" to have other 5 records of that category
Help plz?
View 9 Replies
View Related
Feb 15, 2006
Is there a way to display a number (on a Form) for the number of records in a specific table? I just want to reference how many records there are. I tried to search this topic, but couldn't find anything. Thanks.
View 10 Replies
View Related
Aug 27, 2003
After creating a recordset how do I display the number of records in it?
View 2 Replies
View Related
May 29, 2014
I need to extract a specific number of records into a table using a MakeTable or Append command using a temp variable, e.g. TempK&SA. Previously on the forum I was shown how code could be added to the OnOpen function to use a temp variable to select a specific number of records to report. ACCESS does not have the OnOpen function in the design view of a query like in the report. It does allow a SELECT TOP but only with fixed variables or percents (e.g. 25 in the code below).
The beginning code for the make table query (where 25 is the number of records added) is:
INSERT INTO [Output] ( RndNo, PointBiserial, BloomsTax, DateRevised, Exam1, Status, Exam2, Exam3, Exam4, [NCCPAKnowledge&Skills] )
SELECT TOP 25 TestBank.RndNo, TestBank.PointBiserial, TestBank.BloomsTax, TestBank.DateRevised, TestBank.Exam1, TestBank.Status, TestBank.Exam2, TestBank.Exam3, TestBank.Exam4, TestBank.[NCCPAKnowledge&Skills], *
FROM TestBank
WHERE (((TestBank.PointBiserial) Is Null Or (TestBank.PointBiserial) Between [TempVars]![TempPointBiserialLow] And .....
how to modify the code to allow a temp variable to determine the number of records to append to another table would be gratefully received. (This process then is repeated for a total of 7 append tables with different temp variables.)
View 7 Replies
View Related
Oct 26, 2004
I'm sure this is a no brainer for those in the know - but I dont!
So how do I display the total number of records at the end of a report?
View 14 Replies
View Related
Aug 9, 2013
I have a date field in a table. I wish to display in a query:Column A representing the month. Column B representing the number of records in the table corresponding to that month.
View 5 Replies
View Related
Aug 11, 2014
I would like to ask about on how to display my attached pictures to my report. I'm using MS Access 2007 and I have a table names:
Projects - ProjectID, ProjectName, StartDate, EndDate;
Task - TaskID, ProjectID, TaskName, Pictures;
Picture datatype is Attachment and it is multi-valued field so I created a query to extract picture per ProjectID and to be used as a Subreport. Query results shown below:
ProjectID Attachment
11 tulip.jpg
11 hill.jpg
10 panda.jpg
10 shark.jpg
Now, I have created the sub report and linked it Project table. Result is the pictures add up vertically or downward where there is a big space on the right side, I want to have it from left to right or horizontally.
View 9 Replies
View Related
Sep 16, 2013
I am trying to build a report that shows the total count for multiple queries.
For instance I have a field in my table that can be either A, B, or C.
I have 3 queries built, 1 to show me the information for A's, 1 for B's, and 1 for C's.
I would like a report that shows me ONLY the total number of each category. such as:
A= 38
B= 72
C=12
Thus far I have only been able to create one that shows me all of the information from the queries.
View 4 Replies
View Related
Sep 3, 2013
I have a subform to select which Managers will get a Corrective Action Report based on a single Non-Conformance ID. The queried information looks like:
ID Managers
01 QA Mgr
01 Maintenance Mgr
01 Shipping Mgr
How can I access this data 1 record at a time in order to have each Manager name print on a separate Corrective Action Report?
View 4 Replies
View Related
Aug 15, 2014
I have a table that contains names of employees and the name of awards they received.
tblEmployeeAwards
EmployeeName, AwardName
John,Nobel
John, Pulitzer
Michael, Fulbright
Jane, Nobel
Jane, Fulbright
I would like to know the following:
1. How many employees received more than one award (answer: 2).
2. How many employees who received the Nobel prize also received any second prize (Answer: 2).
3. How many employees who received the Nobel prize also received the Fulbright (answer: 1).
View 10 Replies
View Related
Aug 16, 2007
I have built a report but it only displays one record. I am not using a filter. The records are being pulled from a query that should display 26 records. If I change the sort criteria, i get a different one of these records each time, but i cant get them all to display on the report at the same time. Any ideas?
View 7 Replies
View Related
Feb 20, 2014
How do I pull information from a subform (more than 1 record in subform at times) to put on my report?
I have added the subform to the report and set Visible property to No,
I know the syntax to refer to the subform and its fields but I don't understand how to get all records in the subform for the main record to be displayed.
View 3 Replies
View Related
May 2, 2005
:rolleyes: Hmm how should I put it? I want like to create a form so I can show 8 to 10 records at a time on a single page (instead of using continuous form); so when I press the next button, the next set of 8 records will be show on the next page.
Is it possible to do that with Access?
Thanks,
Jason
View 1 Replies
View Related
Nov 9, 2013
How to display in a report a field with 50 records in two separate columns of 25 records.Is this possible or am I completely off the reservation?
View 2 Replies
View Related
Jun 2, 2013
I am in the of designing an access 2010 database for data entry. Is it possible to create a button on a form in which a prompt asks a user for which records to export. Then depending on the entry export specific fields (First Name, Last Name, DOB) to a specific excel 2010 workbook (setup) and worksheet (template)?
For example, if the user entry is 1, only record 1: First Name, Last Name, DOB is exported to the setup.xlsx (more specifically the template worksheet of the setup.xlsx). However if 2,3,4 are entered then records,2,3,4: First Name, Last Name, DOB are exported to the setup.xlsx (more specifically the template worksheet of the setup.xlsx).
View 1 Replies
View Related
Jan 23, 2014
I am trying to get the number of records under the value of 6 ... E.g. On the report it looks like this
Code:
Date Result
1 5.6
2
3 8.2
4 6.6
5 4
6
7 10
And the code I am using is
=Count([Result]<6)
The resulting answer is 5 , when the correct answer should be 2
View 1 Replies
View Related
Dec 16, 2013
My boss wants to be able to add multiple records where only on of the fields will change. This is a repair record and in this scenario all the work done to the cars is the same. Same date, same place, same time etc. The only thing that changes is the car number
I would like to create a for that will allow him to enter all the information for place, date, cost, etc and then a field that will allow him to select a car from the dropdown and select add to list. He could then keep going and add as many cars to the list as he wants.
View 5 Replies
View Related
Aug 1, 2013
I have a report that is group based on a number refered to as "Line". I want to only have three records per group. How can I do this?
View 5 Replies
View Related
Apr 10, 2008
I have an Access database where we grade reports. At the end of the grading form I have a memo field [Comments] for the grader to enter comments about why the report received the grade [Grade]. Each report is graded by multiple people. So for example, ReportNum 08-001 may be graded by 5 people and therefore will have 5 records in the database. I need a report to show all the comments for all the reports where the grade is <80. I know how to do this except for how to display all the comments from the memo field in the 5 records on one report for that ReportNum.
I hope I am making sense. I appreciate any help.
Jim
View 2 Replies
View Related
Aug 12, 2014
i have a form to generate report with 3 filters,
1.sales_person,
2.Client_Name,
3.Product_ID
these are combo selection and the report is working fine with these 3 filters. filtering by a query. all 3 feilds on the same table.what i am unable to do is make these filters as option to select with a check box. like if i dont want the third filter product but to generate report with the other two filters sales_person and client_name.
edt: uploading my DB Form report_generator on medical_request_query and table medical_requeset
View 6 Replies
View Related
Jun 20, 2014
I have a table that I would like to run multiple filters and criteria.
I would like to have the user enter a word that matches a specific word that matches a field name and all the data fields = 1.
i.e user inputs word baa baa and the query criteria is set to one, it will output all the surveys that match that.
View 14 Replies
View Related
