Reports :: Combine A Text And Memo Field
May 10, 2013
I am having trouble creating a specifically formatted report.
Anyway, I have two fields: [Title] (plain text) and [Description] (memo). I want to combine the two but have the Title bold underlined but not the Description. I want it to look like this:
This is the Title. And this is the decription part that could go on for many, many more lines...
I have tried combining the two fields like: =[Title] & [Description] but if I set the properly to underline, then the whole thing is underlined.
Since the Title will vary in length, I cannot just underline the Title and then put the Description field next to it.
View Replies
ADVERTISEMENT
Aug 13, 2013
I have a problem when I try to combine in a text box a text and value from field in a table.
I would like to have a text like this:
Ref nr: 1
"Ref nr" would be a text in a report
"1" would be the nr of the ID of the client.
I tried:
="Ref nr " & [ID]
It simply does not work. No clue where I go wrong.
View 1 Replies
View Related
Jun 26, 2015
I have a report which when I open it by clicking the button in the form shows what looks like Chinese text in the memo field. To open the report the following is in the event properties for the referencing button
Code:
Private Sub cmdPrintSumReg_Click()
Dim strWhere As String
If Me.Dirty Then 'Save any edits.
Me.Dirty = False
[Code] ...
When I open the same report from the reports menu on the left of the database it is just fine. But obviously it is showing information for all contracts and not the any one contract.
I haven't changed anything in the table that contains the memo field and this only started happening yesterday afternoon after using this db for over a year.
I found an earlier post in this forum with a similar problem but the only difference I see is that the user changed the field from a text to a memo. I haven't.
View 5 Replies
View Related
Mar 14, 2013
I have an Access 2010 database with a memo field formatted for Rich Text.
I created a simple form. It accepts and shows paragraphs, i.e. I press Return and a new paragraph appears (with a blank line in between paragraphs).
I then created a report based on the same fields. In the memo field it shows the text entered in the form, but not the paragraph breaks. It just shows one big block of text without any paragraph breaks. I have looked for a field property in the report design and layout views that might affect how the text is displayed in the report but I cannot find one.
It is not much use if you can input paragraph breaks in a form but not see them in a report.
View 2 Replies
View Related
Jun 6, 2005
Hello Guys,
I am new to Access 2000 and issue is ,I have a field name product_name with datatype MEMO,when I chek my report at the place of product_name instead of the name of product it shows a squared symbol ,i dont understand how I can see the values of product_name.
SO anyone can help me out ,bcos of this I m stuck into my project.
Hope to get answer asap...
Thanks!
Vsap
View 14 Replies
View Related
Jul 24, 2015
We need to move rich text from an Access memo field to a Word text box. So far the best Ive been able to come up with is in the code below. In this code pprs!What is a record set field of a table memo field that is bound to a text box enabled for rich text. The rich text seems to be stored as html as so I can get word to convert it by enclosing it in html tags.
Dim What As Word.Shape
Set What = doc.Shapes.AddTextbox(msoTextOrientationHorizontal , doc.PageSetup.LeftMargin, 225, 534, 0)
Dim sPath As String
sPath = "G:Temp.html"
Open sPath For Output As 1
Print #1, "<HTML>" & pprs!What & " </HTML>"
Close #1
What.TextFrame.TextRange.InsertFile (sPath)
View 2 Replies
View Related
Jun 25, 2014
I am using Access 2007. I recently converted my table field from text to memo. When I run a query and report linked to the qry the memo text is displayed as Chinese character or square box (if field is empty). In some forum posts this is shown as a font bug e.g. with Calibri. I changed from Calibri to Arial as this was reported to correct the bug. It did not work.
My field is set to Grow and Shrink, and table font is Rich Text also as mentioned in other posts. Still not working out.
View 1 Replies
View Related
Aug 20, 2004
Hi,
I am trying to combine 2 text fields into a new field (concatenate) so that I can use it as the primary field.
Can anyone pls help.
View 3 Replies
View Related
Jul 28, 2005
Are there any other advantages in using a text field verses a memo field other than memory allocation? Memory allocation seems like such a small issue these days.
View 3 Replies
View Related
Nov 8, 2005
Hello everyone - what I have is a a set of default text's that I need to be able to insert into a memo field - this is how I've set it up (Access 2000)
A table with the text fields in it called wordings
table comprises of
Id field
wordingnme (txt)
wording (Memo)
and I have a combo box on a form which looks up the wordingnme and hold this info - I need to have a button that will take this wordingnme and insert the wording that it relates to into the field of my record - Called Endor (memo)- I will have many text s say upto 50-60 but when I insert these into endor field I will probable only use say 5 or 6 at any one time on the record line so an example follows
line 45 in endor I wish to insert wordingnme "A" and then Wordingnme "B"
I also will do some free form type within this - any idea's :eek:
View 1 Replies
View Related
May 25, 2005
Hi,
Probably a really simple question, but is causing me problems! I need to be able to limit the amount of characters that can be entered into a field. For text fields I can just enter the relevant field size, but can not find an equivalent for a memo field. Validation rule warns you that there are to many characters, but doesn't seem to actually limit you.
Any suggestions would be appreciated.
J
View 8 Replies
View Related
Nov 21, 2006
Can anyone help....
I have a field on an Access db, this is a "Memo " type field which has many lines of text within it.
I need to run a query on this to get the last line of text within this field.
Aside from records where this memo field is filled in I also have records where the memo field is blank. So basically if the memo field is blank I want a blank field returned as well as fields with data.
I am using Access 2003 but also am running this on Access 2000 (not sure if there has been a change to function names)
This is seriously bugging me - can anyone put me out of my misery?
View 5 Replies
View Related
Jul 18, 2006
This is what is happening. I have created a data base that has a field that is set to be a memo field however when i linked that field to a form for entry it limits it to the 255 max characters for that the text field would have. has anyone ever come accross this problem and if so how do i over come it without starting over because the project is almost done.
View 7 Replies
View Related
Mar 21, 2015
I created a form with a memo field. Data is entered. How do I get the data to print on the report on separate lines rather than one continuous paragraph? For example: Entered in form:
2/1/15 visit to house. 2/2/15 ordered new locks for doors. 2/5/15 Locks installed.
Print view on Report:
2/1/15 visit to house.
2/2/15 ordered new locks
2/5/15 locks in stalled.
View 1 Replies
View Related
May 10, 2013
I'm trying to set the control source for a control on my report that describes the number of portions that goes into a box. Sometimes there is a specific number of portions per box and sometimes it's a range. When the number of units is specific, then it is entered into the MasterCaseMinUnits Field. If there is a range of units possible than the min is entered into MasterCaseMinUnits and the max is entered into the MasterCaseMaxUnits.
I want my report to look at the mastercasemaxunits, if it is blank it will only display what is in the MasterCaseMinUnits field. If there is a value in the masterCasemaxUnits field, then it will display the masterCaseMinUnits & " - " & MasterCaseMaxUnits. this is the code I'm Using:
Code:
=IIf(Nz([MasterCasemaxUnits],[MasterCaseMinUnits])=[MasterCaseMinUnits],[MasterCaseMinUnits],[MasterCaseMinUnits] & " - " & [MasterCaseMaxUnits])
When I run my report, the control displays: #Type!
View 2 Replies
View Related
Mar 10, 2006
Hi,
I have been searching and searching and cannot find any info on this specific problem.
I have a subform that users go into and enter data into the fields. Intermittenly, when a user closes out and then goes back in, the data in one of the fields (always the same field) is missing and has been replaced with ########.
Any insight or advice would be greatly appreciated!!
Thanks,
Krysti
View 1 Replies
View Related
Oct 21, 2004
I'm trying to save the contents of a text box into a memo field in a table, but after my code runs i look in the field and it is cut off after a hundred characters or so, and the last few characters are garbled. This is the code:
Code: DoCmd.RunSQL "UPDATE orderheaders SET orderheaders.Comments = [Text127] WHERE orderheaders.OrderNumber = " & GlOrderNumber & ""
orderheaders = table
Text127 = text box
GlOrderNumber = integer variable
Is there a way to do this with only code? (I dont want to do it by binding the text box to the field)
View 3 Replies
View Related
Dec 20, 2003
Hi
I'm new to forum and can't find an answer to this problem. I am using Access 2002 and have a memo field in a form that I want people to be able to type in as much text as they want. This is then displayed in a report. The form accepts the text with no problems however when I view it in the report it has been cut to 255 characters as if it is a text box. I have set the properties to 'can grow' to no avail. I have searched the MS Knowledge base for a solution with no luck. I admit I'm not an expert in Access and would really appreciate some help as I have been trying to overcome this problem for days.
View 2 Replies
View Related
Jan 6, 2013
The database contains the records of a collection of thousands of photographs and negatives.
One of the fields contains information on the subject matter of each pic and can sometimes be very long. The field was changed from text to memo so as to hold more characters but they appeared in one long string, which means a lot of scrolling to see the information. That has been changed back to text and we are adding a second or third record such as xxx-xxx-xxx cont1 xxx-xxx-xxx cont2 so as to get shorter strings. Is there a way to make the text wrap onto a second or third line automatically after a specific number of characters have been entered or can a carriage return be put in to force the text to a new line?
View 5 Replies
View Related
May 6, 2014
When I changed the memo field from plain text to Rich Text, I got the below divs and slashes. Is there any way to get rid of them?
<div>GC in process - EB1.</div>
<div> </div>
I had only "GC in process - EB1" in plain text.
View 1 Replies
View Related
Apr 11, 2015
I want to create an app that works like Wikipedia. for example any word that have an explain and that's explain available in my database that word become hyperlink text with different color and so if operator click on that word open a new form and show the explain.
View 1 Replies
View Related
Nov 21, 2013
I have a Memo field in my table. I have changed the Text Format property to Rich Text. I can now change the formats etc of the values in the field.
However, I now want to see the Markup HTML tags in the table fields i.e. <b>test</b> in order for me to make changes manually as well.
View 5 Replies
View Related
May 1, 2012
I'd like to set the value of a memo field on a form so that part of it is in bold. For instance, I want to say:
[memo_control] = "This is not bold" & "this is bold" & "this is not bold"
How do I do that in VBA?
View 1 Replies
View Related
Jan 4, 2006
I am in the process of changing over a text field to a memo field to generate more space (in 5 different databases :eek: ) Thanks to all the good info on several searches of this forum, I am pretty clear on how to do that.
The question is... when I convert a field that already has information in it, will I lose the current information?
TIA,
Darnys
View 2 Replies
View Related
Feb 1, 2006
I have a report based on a query. There is a field "comments" that is a memo type however on the report it does not display all of the text. I have the property "Can Grow" set to "yes" however it still only shows partial text. Any ideas? thanks in advance!
View 6 Replies
View Related
Oct 15, 2006
Hello,
The title says it. I want to store 500KB text data into a memo field. How can I do that?
Someone told me there is no limit on the size of a memo field, up to the maximum for a .mdb file of 2GB!!!
Your help would be greatly appeciated.
View 9 Replies
View Related
