Reports :: View One Record From Master Table And Many Record From Slave Tables
Dec 23, 2013
I have got problem with ms access report. I want to make a report which is based on
1) first master table
2) first slave table
3) second slave table
I have done some research and decided to do some form with subform. So I have got the view one record from master table and many record from slave tables in one view.
But it turned out that it has become duplicate records. (the relationship are ok - it duplicate master record as many as slave records)
So:
1) how i can do ms access report from multiple tables - one master record with multiple records form slaves tables
I have a database with two tables. tbl_job_information contains all the contracts info etc. tbl_data contains all the relevant work data. The first table is restricted to certain personnel, whereas anyone has access to the second table. Both tables have a column called 'job no', in the first table it is a primary key, in the second just a field. I would like to make it impossible in the second table to change the data in the 'job no' column to anything that is not in the same column in the first table. It this possible within the tables themselves, or would I have to do it via coding and forms?
I'm Access 2010 newbie. I need to transfer Excel program into Access.I have a .csv file (data extracted from emails) and a Master Excel sheet. Master Excel fields are updated from the .csv - if the primary keys match, else the new records are added. Also, the .csv contains colour names, which must be translated into corresponding peoples' names.
I have a master table with about 40 fields. In addition, I created eight child tables with read only datasheet views of limited fields from the master table. The child table views are based on certain critera in the master table and are being refreshed by using delete and append queries tied to the On Current property of a form. By double-clicking a specific child record, a form is opened to allow editing of the master record. Also, I am using Referential Integrity and Cascade Update Related Fields to update the child table when a change is made to the master. However, I do not know how to add a record to one or more child tables when a record is added to the master table. The new child record would have to be based on the same critera that the append queries use so it gets added to the correct child table or tables.
Currently I keep getting this error: "You cannot add or change a record because a related record is required in table"..My current tables are this:
Primary Table with persons info:
Primary Key - Auto number generated Name Address Email Phone
I have 4 other tables with use check boxes.
ex:
Table 1 - Geographic locations visited
ID - Auto generated USA CANADA ASIA ECT...
Table 2 - Languages Spoken ID - Auto generated Spanish Chinese English
Table 3 - Skills ID - Auto generated Hunting Dance Singing Weaving
Is this not a genuine one-to-one relationship table? I mean No two people would have had visited the same places and speak the same language no? I tried to create a one to one relationship with the primary key to the auto generated ID of the child tables but I'm sure that is not how you do it. Also when I try to save the check boxes in my form and I close it and come back it doesnt save and is blank again. Is it because my form gets its information from a query that takes all the information from all the tables.
how I can get this to work properly? Am i to make use of a foreign key? I've read a lot about it online and watched youtube videos but I dont see why I need it here in this case. Is there a way to set the IDs in the child tables to be the ones from the primary table? Or do I have to use a foreign key and manually input the primary ID into them?
Or would it be better to have all these child tables in the primary table and have one large table instead? I just didnt do that because one of them has like 20 checkboxes with cities and locations
I have a database for staff to request checks to be cut. I have one table with a group of regularly used payees & addresses. A second table stores data for each individual check request. I need to be able to copy a record from the addresses to the check request. I do not want to add all addresses to the address table, as it is only for commonly used payees. So from the check request table, I am able to lookup a payee, which opens the address form to display the address. I need to be able to copy the displayed address to the open check request form.
Hello I have a small problem that seems weird. I have a form which displays a subform with all correspondending jobs for one individual. The problem is the sub form displays the main form information with the other jobs. Im trying to stop the subform from displaying the current mainform's job information. So it won't look like there are more then 1 of the same jobs to other individuals. Can someone help me with the correct method to stopping this. Thanking you in advance,
I am trying to produce a report that shows a single record that has fields in multiple tables. When these reports we're in Word form they were about 7 pages long. I put them in access to be able to update the data in one or more than one of them at a time more effectively. But now I am unable to get them print out one at a time like they looked originally in Word form.
I'm working on recreating my church's records in access and was originally wanting to take people from the Visitors table and automatically move the to the Members Table (and same with Deceased & Moved), but after some searching found that's not really do able. So now my question is, can I have a master table that has everybody (visitors/members/deceased/moved) and then split that into different tables while keeping the main table (that way I can go into the main table and reassign the person)?
I have a database with 7 related tables. Now the main table is called STUDENT. I am essentially creating a report card system and have broken down each part of the report into another table. Now to make it easy for teachers I have created a form which they can search for a class and in a datasheet all the students plus their ID numbers come up along with the spaces for them to enter their grades etc.
The problem I have is this. How can I get access to look for any updates from the STUDENT table and apply this to the other tables as it would not do this automatically, even though they are linked one-many I have copied the data from the main STUDENT table into each other table just so theres a reference for a teacher. Is there any magic button or something that I can make to do this so all extra student names and IDs are added to all other tables?
I have three tables that contain different columns but linked by a primary column call Name. I want to create a table where all these different columns in the three tables join to form a master table which can be updated regularly either through the master table or the smaller tables. The master table also has the primary column as Name.
If I update the master table with records, it should update the respective linked table and vice versa. I also want to link these tables to my SharePoint site.
Note: except the Name column, none of these tables have any other columns in common How do I go about this?
I was wondering if it was possible to have a master table where say 10 of my regulatory tables and their data once inputted from the forms will appear there? Is this possible? Because right now, each of my regulatory tables has a form where the data is inputted and appears within said table.
All these tables are separate, obviously. I want to consolidate all the information into one spot, is this a possibility within access?
I am using Access 2007 and have inherited a database. It has linked tables of Excel spreadsheets that are information extracted from our main system. The user wants developing a much faster and customized approach to billing the customer based on payroll related information.
There is a table of payroll billing transactions and it has the following record lay-out,
job_num, employee number, employee name, union group, rank, regular hours, overtime hours, other hours, trans_date, seq_num
On December 1st John Doe worked 8.0 regular hours as a pipefitter foreman on job number 6430 and this is record (sequence) number 254333.
There is another table that defines the union group. I am not concerned with this information at this time. The seq_num is a sequentially and uniquely assigned number given to each billing record in the main system.
There is also a Rate Master table and it has the following record layout,
job_num, union group, rank, regular_billing_rate, overtime_billing_rate, other_billing_rate
I am struggling as to how to relate these two tables so that I can develop some queries from it.
I have a basic database design, well I think so anyway. It only has two tables:
1. tblClientInfo 2. tblNotes
Basically each client has multiple notes/comments that can be linked to its record, hence the tblNotes table. The two tables have a one-to-many relationship, being that each customer can have many notes.
I then have two forms:
1. Claims Loss Form 2. tblNotes_DatasheetSub1
So I can enter multiple notes for each customer. The problem I am having is with the report output. It wants to print every note (record) that is linked to the customer. I just need it to print the most recent note for each customer (It would save a lot of wasted paper).
Example of a print out of what it is doing:
John Doe - 123 Easy St - Notes 1 (Most Recent Note) John Doe - 123 Easy St - Notes 2 (Previous Note) John Doe - 123 Easy St - Notes 3 (and so on...)
It is printing duplicates of the same customer by adding the additional notes for that same customer on a new line.
How can I tell it to only print the customer one time in the report, and most importantly, to only use the most recent note that is linked to the customer?
I tried using DMax("NoteDate","tblNotes"), but this only returns one customer with one note. I need it to do that for each and all customers.
I have successfully ran a subquery (two queries with one linked to another) by following detailed instructions from this page I found: [URL] .... It works, but the problem is it only shows the latest date for each note, not the actual contents of the note. I feel so close with this option, but so far at the same time.
The TOP n records per group looks promising that I found here: [URL] ...., but I honestly don't know how to implement it correctly in my SQL. I am very much still learning Access and apparently have stumbled into something that is much more complicated than I had originally imagined. I just assumed I could filter the duplicates out, or tell access to print the last or most recent note record for each customer.
My report produces multiple copies of the same record. I know why, but don't know how to fix it.
EmployeeTable.
With a one to many relationship with TrainingTable (via employee PK as FK in trainingtable).
Training table has a one to many relationship with a table called Range.
Report is based on a query that picks up the Employee/Training/Range (range just describes the training unit).
However, If I have more than one range expressed organized a training unit, the report spits out several copies of the Employee record to display all the ranges.
One of the common denominators between them is the URN which is auto-populated as it is an auto number field. My issue is that when I want to add a new record to the payments table using the forms (I can get to the payments form via the register form), I want to be able to identify the record that I am currently viewing within the register and auto populate the URN field with the same number. This is what I have done so far,
Option Compare Database Option Explicit Private Sub AttachPaymentDetails() Call PerformInsert("tblFinancialBudget", "frmFinancialBudget") End Sub
How to fill values in a new record with data from previous record?
I've total 11 columns in a table and values in 3 4 columns are repeating for few rows before it needs to be changed eventually. I want to fill these rows with values from previous record.
I have a keys table and a keysctivity table. I need keys to not be available if they are currently signed out (return_date is null) or if they have been marked as lost (lost_key = true)
This is my activity table. URL....If for example signin_id 1 was not returned or was lost, key_id 1 should no longer be available. Is this something that can be done?This is the access file I am working on: URL....
create two new tables "lostKeys" "unreturned_keys" and have records moved to their respective tables based on whether they are indicated to be lost or currently not returned.
I have a form to edit records on table A and i would like to be able to put a button on the form to copy that record from table A to table B. The code i have on the button so far is as follows:
I want someone to be able to search a product for an order, edit it to reflect how many they are taking but at the same time have a button to copy that record to table B. Then after all the products have been found and copied to table B, they can print of the report based on table B and give to the factory floor so they can find the stock, run a query to clear table B and start on the next order.
I have everything working but copying the records across.
I have created a database which has 9 tables, the first table being the contact information, but in all tables there are fields for firstname, lastname. Is there a way when you enter the firstname/lastname fields into the main table that it can populate the same information in to the same fields in the other tables? If so how?
I had a backup from a table that I saved to excel. Somehow we lost all the records from the table 10 minutes later. There where gaps in the id numbers due to some delete records in the past, and when I did try to put it back in the access table the records some how shift. is there a way of still using the ID nr that is an autonumber in the table and when I set the data back from excel and use the append when paste that they show up correctly? Maybe I can set the autonumber to start from the last record on the table?
I'd like to copy checked records from one tale to another after a user presses a button.
Ex. The table 'Equipment List' has a checkbox column that the user can check off as they scroll through the table on a form. When the user presses a button, after they are completed with all of the checkboxes, each checked record is then copied to 'Equipment Transactions' to keep a record of which pieces of equipment were used for the day.
I'm trying to get a DB to move records simultaneously using a command button. The records are setup with check boxes for example: one column has a check box for 1 Year Ratio the next column has a check box for 2 Year Ratio and the third column has a check box for 3 Year Ratio.
How can i move the information out from 3 Year Ratio into another table and then move 2 Year Ratio check into 3 Year Ratio check box and 1 Year Ratio check into 2 Year Ratio check box by using a command button.
I've created two tables, one containing order data, the other additional order data. Not every order has additional order data.
First i've created them with no specific relationship and filling in data via form worked fine. If i added additional data, a new record in the additional order data table was created automatically.
Later i changed those tables to a "one to one" relationship by setting the long int field that links to the order data table to no duplicates. I just did it because i thought that's how it should bew. But since then i can't add additional order data via the form anymore, but get the error "Record(s) cannot be added; No corresponding record on the 'one' side" instead. I could just revert back to the one to many relationship, but it bothers me.
