This may be a really simple problem but it has me stumped. Working in Access 2002, I have a form with a subform (continuous). When the user clicks on a textbox in the subform, I need to capture the value and pass it to the main form so that it can be used to create a filter for yet another subform (not nested) on the main form. How could I accomplish this? Thank you in advance!
View RepliesI have a subform which makes a change to a field on the main form. When focus is returned to the main form, the BeforeUpdate and AfterUpdate events fire. Why? I thought from the form's perspective, the subform is just another control.
BTW, I get the same behavior if I modify the field from within the Exit event of the subform control.
In either case, the main form's Dirty event is NOT triggered.
I have a form (about patients) containing a listbox (list of visit dates) and a subform (showing medications at that date). When you click on the listbox, the subform is re-queried with the selected date as a parameter to show the medications that were in use on that date. This is working fine.
However, when you move to a new record (patient), the subform is initially blank because the listbox hasn't been clicked on yet. This means that it looks like the person isn't on any medications, which is causing some confusion.
I need a way to have the subform show the "top" (most recent) date because that is the current medication list, and the thing most people want to see first. It is always the top of the list, so I would like to do something like this (pseudocode)
Code:
Private Sub Form_Current()
Forms![MedSearch].SelectDateBox.Requery
Send MouseClick Event to line 0 of SelectDateBox
End Sub
I have a main form with a subform. I need to update values in the subform when a field on the main form is updated using afterupdate on that control.
Example:
main form name: mainform
control name: gst (on main form)
subform name: subform
records displayed as datasheet.
records field to update: retail
In main form gst control afterupdate event:
Me.[subform].[Form].retail_afterUpdate
Hoping to call the afterUpdate procedure on the retail field.
Error message:
Method or data member not found.
I have a mainform named EMA and a subform named Q_EMO. In the mainform there is one event related to a patient.In the subform Q_EMO there are all the events releted to the patient.I would like to get a record in the mainform EMA when I double click in the record of the subform.
View 12 Replies View RelatedHi everyone!!
This is my first thread in this forum..Hope to get best from this site ..well i m facing a problem..i have a main form and a subform (which is in datasheet view) . Now i have a button called "close_form" in main form on whose click event i have writen this code :
Private Sub close_form_Click()
On Error Resume Next
DoCmd.DoMenuItem acFormBar, acEditMenu, acUndo, , acMenuVer70
Me.Controls.Item("fees sub").SetFocus
DoCmd.DoMenuItem acFormBar, acEditMenu, acUndo, , acMenuVer70
DoCmd.Close
End Sub
1. If i run this form directly from Access and there are no changes i do in the form and click this button then it gets hang after showing error "run time error 2046 ; the command or action undo is not available now " "press End or Debug or help"
2. As i have created a Custom menu, if i run this form from that menu then it does not show any error. But it runs fine for the first time but nothing happens on clicking this button the second time i open the same form ( in same session).
What to do ?? Please help ..
shikha
I'm trying to code an event that would occur when a user double-clicks on the Record Selector of a subform. I want it to then open a form that would provide additional details about the record selected in the subform. I can't find documentation to tell me (1) where to put the code, i.e. subform double-click event vs. subform detail double-click event, etc.; (2) how to reference the record id of the selected record for use in the filter for the form that is going to be opened (the underlying query contains the ID for the record). Can anyone help or point me to documentation?
View 2 Replies View RelatedHi,
I need to click a command button that placed on sub form while being on Main form. In other words if I clicks a command button on the main form, at the same time another command button on the sub form should be clicked. This is to take some actions.
I know the way like this "CmdSave_Click" but when I am on any of the form.
How about if I am on main form and need to click command button on subform?
Regards,
Ashfaque
I have a continuous form with a button 'Cmd1' & a textbox 'txtMail' which is set to visible no.
When the user clicks Cmd1 - then txtMail becomes visible.
I can do it using vba on the buttons click event but when it executes txtMail for all the records become visible.
How do I use a button's click event on the form's current record - Private Sub Form_Current() so that when the user clicks Cmd1 on the current record only txtMail for that record becomes visible.
I'm using Access 2007.
I want to add an event on Form Header when double click it will filter the values, which i did with macro, but could it happen on second time double clicking it it refreshes whole as original?
View 2 Replies View RelatedI have a main Form "Client" that shows details such as Representatives, phone numbers, status, etc. I also have a main report "CRM" that is a nicer summarized table version of all of my Client form entries.
The "CRM" form will be used by others in my office to see what clients we are contacting, etc. What I want to be able to do is have someone open the CRM form first. If they want to see even more specific info (not everything is included in the report, as that would be too messy), I want them to be able to double click the Client's name on the report and be taking to the corresponding entry on the Client form that shows more details.
Right now my code for the Report which is not working is the following:
Private Sub Client_Name_DblClick()'double click on a client name in the reportDoCmd.OpenForm "Client", acNormal, , "[Client_Name]='" & [Client_Name]'this should open the Client Form to the record of the same client that was double clicked on the reportEnd Sub
I have some code for a button on click event to open a form and select the record which corresponds to a value in an unbound text box. The code is:
Private Sub Command25_Click()
On Error GoTo Err_Command25_Click
Dim stDocName As String
Dim stLinkCriteria As String
stDocName = "frmOpenPatientRecord"
[Code] ....
This works fine when I put in a 10 digit NHS number but opens a blank record when I enter a four digit or six character/digit PatientNumber. Both patient number and NHS number are text fields in the underlying table.
I'm developing in Access 2007 and created a runtime version.
When the user clicks the X to close the runtime application, the main form's Load event fires. Any clues as to why this might be? Some of the code is based on other forms that do close, so of course errors start flying. Note, this is only in the runtime version; the accdb file works just fine.
My current workaround is to put the offending code into the forms On Current event, which I'm able to do in this context.
Is it wrong to think that a forms On_Load event shouldn't be firing when the application is closing?
I have a report that tracks scores for our employees. From the report, you can click a button to add a new score in a form or edit an existing score(frmscoretracker). On this form there are two subforms, in a tabbed control to track additional information about the score; what areas were marked down(Trends), and was it a failing score(AutoFail).
When this form opens I have it programmed to only show the subform if there is data in it. The goal being, if I am adding a new score and there is no existing trends or Autofails for this new record, neither subforms will show - I will add an after update even to show either trends or autofail depending on the score recorded. Also, if someone chooses to edit the score, whatever subform with data, will show as well.
When someone clicks to add a new score, opening this main form to a new record, both of the tabs show. However, if the form opens to an existing record, the appropriate tab shows. Here is the code
Code:
Private Sub Form_Open(Cancel As Integer)
'If the subform has a record, the tab is visible, if not, the tab is not visible
If Me.frmtrends.Form.Recordset.RecordCount > 0 Or IsNull(Me.Trends) Then
Me.Trends.Visible = True
Me.TabCtl33.Visible = True
Else
Me.Trends.Visible = False
End If
[code]...
Both tabs are set as not visible in the default settings. Is there something in this code that is triggering then to be visible when there is no record in the main form?
I have a main form that has two subforms, subform1 and subform2, both connected to the main form. When I enter data into a field in subform1 I want subform2 to requery and update to show the calculated results from the new or changed data in subform1.
I found that if I do a refresh it works when changing the data but not when entering a new line of data in subform1. I tried some code in the after update field of on subform1, but cannot seem to get anything to work.
Me.[subform2].Form.Requery
Does not work. It errors and says it cannot recognize subform2 as a field. I have tried a field name on subform2 but I still got the same error.
I would like to set a flag when a report gets emailed.
View 14 Replies View RelatedI am new to access and I recently encountered a double click issue
My form loads perfectly on double click event but it shows the first record instead of selected record.
My search is based on a PersonID but each PersonID has different WorkID that I wish to display on double click but it always shows the first WorkID instead of my selected record
I have tried changing the filters in the form properties but it still doesn't work for me.
Here's my code:
Private Sub SearchResults_DblClick(Cancel As Integer)
DoCmd.OpenForm "WorkForm", , , "[PersonID]=" & Me.[Searchresults], , acNormal
End Sub
[Searchresults] draws information from my Query
Query information:
PersonID... WorkID... Type......Location
1234..........1............Paint .....Address A
1234..........2............Electric...Address B
1234..........3............Floor..... Address C
I am sending an email using SendObject. Sometimes it works, and sometimes it makes the computer freeze up with no error message. I have tried this with Outlook running or not running, seems to make no difference.
Code:
'The sub procedure below sends e-mail in response to a click on the Send button.
Private Sub SendMessagesButton_Click()
'For Access, define some object variables and make connections.
Dim myConnection As ADODB.Connection
Set myConnection = CurrentProject.Connection
Dim myRecordSet As New ADODB.Recordset
myRecordSet.ActiveConnection = myConnection
[Code] ....
I have added some MsgBox () to narrow down where it crashes. It is after 'Five' and Before 'Six'. On the line:
Set appOutlookRecip = .Recipients.Add(eMailAddress)
I am mystified as to why it works OK sometimes, and not others. The email address being used is valid.
I all I have looked in the forum but can't find anything that matches I have a form containing a subform called eventswich shows some events in date order, as I have too many information on the table events I could not put them all in the subform if not only the essential information, what I need is if I double click on the field "DATE" it would open the "EVENT" form and show me all the information contained in the record.At the present time I have the filed SELECT RECORD set to NO on the form properties!
Hope I have given a good explanation!!!!
Thanks
Marco
I'm working with a database with employess info in access, When I click on an employees name in a form, I want to fire off another form with there info, what I have now it does nothing.
View 4 Replies View RelatedI have a list box control on a form and i'd like to set up a right-click property. Can this be done at all? When I open the Events tab on the property window..there is no right-click property :confused:
Thanks!
Lets say I have Form A and Subform A with the parent-child relationship established that works well. Subform A has a Text box control that is getting display when I include the subform in Form A.
Now, I decided I dont want to include subform A in the Form A. Is there a way for me to show the contents of that Text box control in Form A without attaching the subform in the main form (Form A)?
I read somewhere that to refer a control on a subform, I have to use the code - Forms!mainform!subform.form!control. But this would be in VBA. What is the equivalent of this in a Control Source in the main form?
If I have not explained myself correctly, please do let me know.
To summarize, my question is without including the subform, I want to reference the values of the subform in the mainform. (I have some design necessity for this requirement) Is there a way for this?
thanks!
Hi,
I've a form that has 2 subforms - which subform is used is dependant on the selection of a combo box in the main form. After much time spend trying to set this up I am happy to report that this section works fine.
My problem is that when I have completed the subform I am not able to continue tabbing through the rest of the form.
Any help would be great,
thanks
Barry
everytime i try to tab from my subform, it creates a new record for that subform. Also, about the subform, the control that links the main form and sub form is unique.
I have now set my Cycle property on my subforms and forms to Current Record. How can I tab from the subform to the main form and vice versa?
Thanks!
hi
i have a main form, which has a subform (subform1)
subform1 has a further subfrom (subform2)
in the subform2, i have a value, which on a double click, i wish the main form critical value to refresh to
thereby the main form refreshes to the value of the subform 2 value
i cannot work out the code, you may have guessed from the description of the question, i am a bit of a novice.
could anybody assist, please
Hi, I have this main form, "frmMainPatient" and I am trying to add in another Main form "frmFim2" as a subform into frmMainPatient. I am running into some issues. Can someone take a look and tell me what I am doing wrong. Thank you,
View 2 Replies View Related