I would like to know if there is any procedure to restrict/stop auto number increment for certain number of record count (say 50), then increment by 1 for next 50 records.
View Repliescreate a macro that automatically fills in the next invoice number in sequence",,I'm assuming this macro would look at the value of the previous record and add a one to itI don't want to use a AutoNumber field as I might need
(a) to modify value or
(b) need to skip numbers.
Hello ALL,
I want to know how to reset (to start again from 1) my primary key field. As an example i have the "Customers" table with the field "customerID" as PK now i entered many values (20) then i deleted them but i want to start again and the "customerID" value starts with 21 i understand that but i want a fresh DB (i was testing things) and i want to start from 1 can i? how? i even deleted the relation between this table and the other table but no success!
Some help please?
THX in advance
Hello ALL,
I want to know how to reset (to start again from 1) my primary key field. As an example i have the "Customers" table with the field "customerID" as PK now i entered many values (20) then i deleted them but i want to start again and the "customerID" value starts with 21 i understand that but i want a fresh DB (i was testing things) and i want to start from 1 can i? how? i even deleted the relation between this table and the other table but no success!
Some help please?
THX in advance
I have a daabase that I am importing via excel. I want the entries to be numbered
ex: MT0001
MT0002
etc....
I would like it to promt the user for the last number(or next number in sequence) entered, then fill in the blank records with the next increment number.
The prefix will also change to so eventually the user would enter into the prompt RD0001. then autofill the 140 imported records with RD0002, rd0003... etc....
I can't really make seperate fields because the MT0001 number will become a barcode and putting them seperate causes many issues.
can this be done? Any help would be great I am still a beginner but slowly learning!
Thanks!
How do I increment record id like given below:
2014/1
2014/2
2014/3
And when year ends
2015/1
2015/2
I have two tables, Articles and Versions, related 1 to many. In my Versions table I want to set up a field that will start at 0 for the first version record related to an article record, and as version records are added in relation to that same article record I want it to increment by 1, no gaps. It ideally would be editable. It will not likely count above 5.
The result would be
Code:
article1 version0
article1 version1
article1 version2
article2 version0
article2 version1
article2 version2
article2 version3
What's the best way to accomplish this?
I have a master/child forms. in master form sale_id,collection notes are placed. and in child form all collection details like collectionnumber,date,etc., child form look like datasheet view.
When i select the record from the list depending on the sale_id all the collection records shown in datasheet view form. If no record is there ok. if more than one records are there in collections of sale_id.i need count of records in collection depending on sale_id and also if i select one row in collection, notes to be shown for that record when i clik on shownotes button.
If more than one record in collection automatically it increment. how many collections for the sale_id. collection number would be increment. How and also show notes depending on collection number and sale_id.
Here is my issue. In a table with an Auto Number index some records have been deleted. I have been able to recreate them along with their original auto number. The problem is that I do not know how to append these records forcing the original auto number. I have tried changing the auto number field to a number field in the table, this works except I cannot change it back to auto number.
I am sure I’m not the first with this question or issue. I did search through a couple hundred entries about auto number before I posted this question.
Jim
I would like to know, how do i reset the count of my auto number fields after testing? is it also possible to specify which number the auto number should start counting from?
View 3 Replies View RelatedI'm redeveloping a DB for a new project, so have removed all previous records from relevant tables (to start a-fresh)
One snub, the ID fields in the tables are auto increasing from where they left off, rather than from 1
If anyone knows how to reset the auto counters, it would be very much appreciated
Thanks in advance
I have a form [IUDATA]
I have a add record button.
I have a date field [DATEIN]
I have a text field [DRPNO]
If the [DPRNO] field is empty, I would like the user to have the [DPRNO] field be automatically populated after the user enters a date.
I'd like the format of [DPRNO] to be "dpr YY-XXX"
Where:
YY is the year of the [DATEIN] field and
XXX is number of records in that year.
So for example, if it was the 4th record with a 2013 date the [DPRNO] would be dpr 13-004.
Hi,
I'm trying to get the maximum number in a table field to increase it by one depending on the member that is selected in a drop down in a field.
I have three tables: members, programs and times. Each member can have N programs and each program can be broadcast N times.
Each member has a three digit code, like XXX. Each program has the three digit code of the member + three numbers that are supposed to auto increment. That is, the first program of member X with the member code XXX is called XXX001.
What I'm trying to do is that when a new program is filled in and I select the member, then the program code should update automatically, adding one to the latest program by that member.
That is, if the last program by member X that was inserted in the database is XXX010, then if a new program is inserted it should automatically be XXX011, even though programs by other members have been added in between.
This is the code I use now, for the AfterUpdate when selecting the member in a dropdown in the form. But although I've played around a bit, I just get error messages...
Private Sub medlemsruta_AfterUpdate()
Dim medlemskod
medlemskod = Me![medlemsruta].Column(2)
Dim strMax As String
strMax = DMax("programs_kod", "table_programs", "Left$(programs_kod, 3) = medlemskod")
Me!program_kod = Left$(strMax, 3) & Format$(Val(Right$(strMax, 3)) + 1, "000")
End Sub
Medlemsruta is a dropdown where one selects the member from the members table, where the three digit code is in the third column (Column(2)).
I'm trying to use DMax to get the maximum number for the particular member and after that adding 1 to that for the new program code.
Grateful for any advice! Thanks!
I'm trying to get an invoice number field to auto generate the next number, keeping the format as "00000"...this is what I have, which gets the next number but drops the leading 0
Code:
Private Sub Customer_AfterUpdate()
If Len(Me.[InvoiceNumber] & vbNullString) = 0 Then
Me.[InvoiceNumber] = (DMax("[InvoiceNumber]", "[tblInvoiceNumber]") + 1)
DoCmd.RunCommand acCmdSaveRecord
End If
End Sub
invoice numbers are 04024, 04025 etc...how I keep the formatiing?
I need to create an auto number for service calls that show the following:
year as 08, 09 etc, month as a letter, Jan = A, Feb = B etc then an incremental number starting at 300 for each month/year combination.
So for example: 08A300
Can anyone help me as I am stuck?
Well, here's my database :
Name : String
Address : String
I want to add an automatically generated column, "no.", to show which number it's in. Like this :
No. Name Address
1. A Unknown
2. B Unknown2
The problem is, I can do that with Auto-Number, but if the user delete row 1, the number in row 2 is still 2, not 1.
Is it possible to generate query that have "no." column in it ?
I have a table with an auto number PK. This table will contain orders. I'd like to use the PK from this table as the Invoice number on the invoice. I'd like to have it start at a number other than "1" just because it looks better on an invoice. I don't know how to do this. I looked at the table design to see if there were options available to me there but couldn't find anything. Is it possible? (I do not know how to use code.)
View 7 Replies View RelatedI ran into a weird task, sometimes at my job we have to use 3 identicle records where just one thing changes and that is the date. The thing that is giving me a problem is I get an error if I try to duplicate the record due to primary key being duplicated. I have a ID field which gives all records a number and when I try to duplicate the record I am in, I get an error because of the duplication of the ID Field. Is there a way to get around this?
View 6 Replies View RelatedAs part of a larger multi-user system there is a time recording part with a simple table called tblTime with an autonumber field. Today at 11:45 users started reporting receiving a 3022 error. On looking at the table I noticed that if I tried to manually add a record then the ID field number inserted automatically was not the next number in sequence, but one that already existed, hence the error.
View 2 Replies View RelatedHey all,
I'm having a horrible time trying to get this to work. Basically, I have a database which has multiple tables. All of my tables are being generated with a CREATE TABLE statement. What I would like to do is add a validation rule or something else upon creation so that only X number of entries can be entered into the table.
Initially, I just added a rule that said id<5 or whatever manually to the table in order to restrict the number of entries, but I can't figure out how to do this automatically in my SQL statement or Visual basic. I want to be able to have this check added upon table creation. Surely what I'm doing must be possible.
Am I going about it the wrong way? Any Help would be appreciated. Thanks!
Hello,
My "customer" form is based on sigle table. I have to restrict no of customers only 5 customers. can anybody help me ?
This is required for distributing a database.
Regards,
Satish
What I would like to do is have a field in a given record increment itself every time that record is selected. For example, say you have a table that stores items in the inventory: each item has a times_search_for_field.
Now, lets say a user runs a search which results in the following SQL:
SELECT * FROM Inventory WHERE experation_date=Today();
Now I want to have every record returned by that SQL statement increment it's times_search_for_field incremented by one. I'm just looking for the most efficiant way to do this.
I know I chould just have my asp .net code loop through the results and call an SQL UPDATE statement for each record, but it seems there should be a more efficient way of doing this.
Mike.
The title probably doesn't give an idea of what I need, so here goes.
We currently have reference #'s for our bills that include the date requested in mmddyy format, the first 3 letters of the customer, the initials of the order taker and finally a sequential number to show the sumber of bills that day.
example: 120705SEAGMM02 2nd order taken by GMM for Seagate on 12/7
120705SEARLH01 1st order taken by RLH for Seagate on 12/7
I want to generate this number automatically based on the date entered and the initials given of the user. We only deal with one customer at our desk so that will always be "SEA".
I have a query that generates the first portion (date, customer, and initials):
SELECT Format([REQDATE],"mm") AS [Month], Format([REQDATE],"dd") AS [Day], Format([REQDATE],"yy") AS [Year], Format([REQDATE],"mmddyy") AS [Both], [Both] & "SEA" & [PickUpReqData]![INITIALS] AS REFNO
FROM PickUpReqData;
But I can't seem to get my head around the part of generating the number. I know I had done this in a database I created 2 jobs ago but all my files were flooded out in Katrina. (I have since relocated to Atlanta, although I'm not looking for sympathy. But I will take what I can get!)
Anything to point me in the right direction will be appreciated. I am looking to have this on a form and feed the REFNO field in the PickUpReqData table.
Thanks.
Gary
I have a table called "OrderDetails" with following fields:
Num
OrderID (Primary key)
Product
Quantity
Price
I want to create a data entry subform that can used to enter order details in this table such that, for a given OrderID, the Num field is automatically set to previous number + 1. For example, for OrderID = 12, if there are 4 products that need to be entered, the 4 records should automatically take 1 , 2, 3, 4.
Hi, basically what i want to do is append a record to a table using vba. I would like to take two values from my form (productID, supplierID) and insert them into a table (supplierProductsTBL) under the same headings. I've constructed an sql statement but am getting the following error:
runtime error '3346'
number of query values and destination fields are not the same'
I think this happens because the table also contains an autonumber field (supplierProductID) and i'm not referencing this in my sql statement (below):
mySQL = "INSERT INTO SupplierProductsTBL ( SupplierID, ProductID ) VALUES ('" & SupplierID & "'), ('" & ProductID & "')"
i wuld just get rid of the autonumber field but i need this.
Any help on this would be appreciated, cheers mark.
Using Access 2007..I have a table where the RecordID is an autonumber, and PK.To set this table up I have a load routine, (becuase I have done this multiple times for testing and further deveopment and I compact and repair the DB prior to loading) - the 690 records are correct numerically and autonumbered.This table has transactional data where existing records are updated and new records are appended.
I found the autonumber was not incrementally increasing - so no reseed the auto number (using ALTER TABLE 3IWSPLans ALTER COLUMN RecordID COUNTER (1000,1)) prior to starting the transactions.
New transactions will append correctly, up untill I amend a existing record (using a delete and append query via a staging table) - then the autonumber tries to reuse a number already in the table and because its not unique it errors.why the auto-number is not incrementally increasing correctly