I created an update query that says it has successfully updated 600 records, but when you go into the table, it has not been updated. I am working with an .mde. Does that make a difference?
I first created a select query to find everyone in TX. Then I changed it to an update query to change all TX to CA. Since it did not update the table, I tried running the update query again and this time it says there are not records to update (since it uppposedly updated my 600 records).
I am trying to implement an update query per the instructions at http://support.microsoft.com/default.aspx?scid=kb;en-us;127977 to append records from table2 to table1.
I would like to add a criteria here saying update (and append) only records that match the criteria table2.dateofreview <= #12/17/2006#
This does not seem to work. The same query works without this criteria.
To test this, I created just one record in table2 (table1 is blank at this time) and manually entered the dateofreview as 12/17/2006 and tried to execute the query. It is not able to show any records.
I have a list box whose data is inserted in a table named as "test0" ,now in a macro of vba i want to select all the items in the list box and create there pdf files in a folder at my desired location. So far i have managed to create a pdf file of single item ,but i want to select multiple items at once ,
Code: SELECT test0.ID, test0.item FROM test0 WHERE (((test0.item)=[ItemNumber]));
So, in this query itemNumber are multiple and i want to create there pdf files at once ..just on a click of one button ?
I've set a database which has a table in which there are 2 fields "Account" and "Total Accounts". I want to have the amount of total summation of accounts in "Total Accounts" field of each record, which is the result of summation of "Account" values in all previous records till the current one. In order to do this purpose, I copied the value of "Amount" field of each record into "Total Accounts" field of the same record, at first. Then, I tried to add the amount of "Total Accounts" field of every record with just the amount of "Total Accounts" of previous one to earn the actual total amount of that record. I found that I need a VBA loop to do this query for all records (except first record) and so I code it as below, but it has the Run-time error '424' : Object required and it seems that I am in a mistake in definition of strSQL variable:
Code: Private Sub doDataSegm_Click() Dim dbs As DAO.Database Dim rs As DAO.Recordset Dim strSQL As String Set dbs = CurrentDb() Set rs = dbs.OpenRecordset("Table1", dbOpenTable)
I have 2 tables that are joined by a many to many table:
tblProductInfo - ProductID
tblProductLinerMM
- PLProductID (FK to [tblProductInfo].[ProductID]) - PLLinerID (FK to [tblLiner].[LinerID])
tblLiner
- LinerID
I have a range of products that each use 2 liners. An inner liner and an outer liner. I need to add 2 records per product to the tblProductLinerMM table.
for example
tblProductInfo has the following records:
- 2138557 - 2378954 - 4387657
tblLiner has 2 liners in particular that relate to these products:
- L5475 - L5468
I need to create the following records in tblProductLinerMM preferably with the use of a query :
I need to be able to update tblManifestData with a new manifest number and manifest comments, along with assigning it a TSDF. how to be able to enter a new manifest number and the associated data without having it create two lines in tblManifestData. I thought that I could enter a new manifest number, then requery the table and form so it shows the complete list of manifest numbers (including the recently entered one) while staying on the newest entry.
I have a table with many records, and I would like to update for one of the fields, the same information as in the first record. Keep in mind that a group of records have the same attribute. The same problem is easy to solve in EXCEL just by dragging down the info from the above cell - in this way you populate all the records with the same info as the first record, for a specific field.
I have one form and its consists of some records. I will assign one button to that form. when i click on this button this record need to save to in another table or query. How to do this. I want to create a receipt that's why i am asking this question.
I have one table, I want to update multiple fields in that Table with values.Currently I have on update query for each update.So for exampleRows: Commercial Quotes, Cover Notes, Personal QuotesWill have the values: Yes, No, Yes in them.I need to update those fields, if they say Yes to Commercial Quotes, Cover Notes or Personal Quotes depending on the field obviously. And blank them out if it says No.Currently I have 30+ different queries I have to click individually one after the other to update each row. I was wondering if theres a quicker way of doing this all in one hit.I have a tiny bit of SQL knowledge.So one of the queries I've figured out I've converted to SQL but again it only updates one instance...UPDATE Enabler_Data SET Enabler_Data.[Commercial Quotes] = "Commercial Quotes" WHERE (((Enabler_Data.[Commercial Quotes]) = "YES"));I tried whacking an OR replacing the ; and repeating that statment replacing Commercial Quotes with Cover Notes but it errored out on me.This is where I get completely stuck and my meagre knowledge fails me so any help would be useful.Thanks in advanceMatt
I have imported 8000 records into a table called competency.
the table does not have the emp id, but needs it. I have a table called employee information which has the emp id as the primary key. I want to create a simple update query to copy the emp id (autonumbered primary key) field from the Employees table to the (now blank) emp id field in the competency table.
I created a query in design view, added the two tables included the fields from Competency, Emp ID, Last Name, First Name and in the update field for Emp id I added this "copy[tbEmployeeInformation].[empid]" In the criteria field of last name I typed a name and ran the query, it gave me the correct amount of records to update, but when I ran it, it gives the type conversion failure error. I checked the fields and they are the same in both tables (type, length, indexing)
I have an Access 2007 application that has a Parts Table that contains a list of automotive parts.I have attached a screen shot (parts.jpg) showing the structure.I have another table called Web_Parts that has exactly the same structure as Parts. The Web_Parts table gets its data from a CSV import that I do that is data extracted from an MySQL database used by an eCommerce website.
You will notice that there is a field called "Web_Product_Id" (number). This is the unique ID for each of the products that I have exported from the Web shop system. I need to regularly (probably every couple of weeks), export out of the web shop system and import into the Access environment.
Due to the fact that the data in the web shop system may change (pricing, description, add new items, delete new items etc), I need to find a way that I can simply update any existing records in the Parts table with any new information contained in the Web_Parts table......
I have this table "tblPreventativeMaintenance" which calculates when the next appointment for service. Stored in the field "NextDueService". I have three fields in this table. "SerialNumber", "NextDueService" & "Engineer'sReport".The whole purpose of the table above is to do the calculations.Now the results of the calculations I need them to go into another table "tblInstallations" so I can use it to show Next Due Service when there is a call out in regards to certain ready installed equipment. I have same fields in both tables.I tried update query but for some reason it didn't work or at least wasn't giving me the results I needed from it.
I'm running an update query that's based on a select query (that runs some calculations). The update query is updating ALL the rows that should be updated with the information in the select query with data from the final row in the select query, and not on a per ID basis as I think I have it set-up to do. The data looks correct in the update query, but again it's not coming out right.
I Have a table that contains the fields: CAT, CHAPTER, ID, someSrting and Completed
CAT, CHAPTER, ID are numbers and Completed is true/false. If I mark a certain entry as Complted (true), I want all the records with the same (CAT, CHAPTER, ID) as the one I marked to be updated to Completed.
For example, If I marked the entry cat:1 chapter:1 id:1 as completed (true), I want all the entrys that have cat:1 chapter:1 id:1 to be marked as completed (true)
the code I wrote is:
Code: Private Pub Completed_check_AfterUpdate() Dim myCC Dim myCat Dim myChap Dim myID myCC = Me.Completed_check myCat = Me.CAT myChap = Me.CHAPTER myID = Me.ID CurrentDb.Execute "Update [my Table] " _ & "SET Completed = (" & myCC & ") " _ & "WHERE CAT = (" & myCat & ") And CHAPTER = (" & myChap & ") And ID = (" & myID & ") ;" End Sub
I'm running the code (my clicking the "check box") and nothing happens, I was thinking that maybe I defined the after "WHERE" statement wrong, and there are 0 entrys changed..
UPDATE: after removing the
Code:
"& "WHERE..."
row, the code does update the entire table, so I have a problem with the syntax of the sql..
I Work for an NHS organization. A department here orders prescriptions and sends them out to Gp Surgeries. I have been tasked in designing a database to make this easier for them.
Prescriptions arrive on a Pallet. Each pallet has 100 Boxes of prescriptions on it. Each box Contains 2000 Individual prescriptions. I have a table which contains the following:
Box Number Serial Start Number Serial End Number
When the user enters the first box number and the serial start number, i need it to calculate the serial end number and insert another 99 rows into the table and also calculate the serial start and end numbers for these other 99 records.
Can anyone help me with this - I have an append query to a statement table for invoices with a macro set. When the query is run the data is added to the statement query.
what is happening is that it is adding the data ok on a seaparate line but is also updating any previous invoices for the same client to the new invoice number obviously not what I want.
I have got a query that updates details from one table2 to table1, "Reference" is the primary key and this is what the query uses to determine which need updating.
It all works great but if table2 contains a record in "Reference" that is not in table1 i just want it to ignore it, currently it just seeems to add them.
I have a stock-type record and a stock-item record. I want to update a flag on the stock-type record called instock to be true if there are related stock-item records and false if there are no related records. Does anyone know how to run a updating query that will do this? I am fairly new to this so I'm sorry if this is a bit of a basic question. Thank you for your help in advance.
MS Access 2013: I have two database tables as below:
tbl1_MainDB --- It has a field named as "City" where I get huge data for some city names. Sometimes This field may have some unknown/new names which are not listed in our 2nd table ("tbl2_RefrDB")
tbl2_RefrDB --- It's a reference table which has raw names for cities, and then standard names of their city and state in another fields.
Target --- I want to create a VBA prorgram (Sql query) which can look from tbl1_MainDB.[City] to tbl2_RefrDB.[Raw_City] field, and if found then pick the "Standard_State" and "Standard_City" record values from there, and update into the 1st table "tbl1_MainDB".
...if not found in "tbl2_RefrDB" table, then user can be informed & ask for updating the new/unmatched city record as a new record in this table.
I have a table called tblCompanies. When a company acquires another company, I need a method by which the acquired company's CompanyID (PK) can be updated to the new company's CompanyID (PK). I also need to be able to update all related CompanyIDs (FKs) to the new value in related tables.
In cases in which the new company does not have an existing record, there is no problem: the company name simply gets changed to the new company and the existing CompanyID is maintained. I then use an audit table and Track Changes function to keep track of the company name data and a union query to keep the old names in the selection lists.
The problem is when both companies already have existing records in the table.
So, let's say I have records for Company A and Company B. Company A merges with Company B and Company B is now the main record. What is the best, simplest and easiest way to update the CompanyID (PK) from A to B and change the CompanyID (FK) to the new value in all related tables?
I am envisioning a pop-up form that directs the user to select the new company and then an update query happens behind the scenes... but exactly how does the criteria for the update query get selected and how do all the related tables get updated? My vba skills are pretty basic, will I need extensive coding to do something like this?
I am looking for a way to update certain records in a table with an incremented value of +1 each time.
For example, TBL_MAIN will have fields REF_NO and INCREMENT_VALUE. In field REF_NO, the same record may appear more than once and the INCREMENT_VALUE field needs to update by +1 each time. I have attached a simple snapshot of the table. In this example, I would like ref ABC123 have it's INCREMENT_VALUE increased by +1 each time following on from the last incremented value of 12460. I believe this may involve DMAX function, For Next loop and possible DAO recordset code but don't really know where to start!
This may seem a really dumb question but I just can not get my head around the best way of solving it.
I have two tables orders and orders_tmp the table orders is created form the orders_tmp table. The order is created by a single field createorder (yes/no)from the order_tmp table. I run an append query to copy the records into the orders table. this woks fine.
The problem I am trying to solve is how do I now go back and change the order for what ever reason. I need the order_tmp table to now also include my existing order.
