Using A Command Button To Display A Table
Sep 3, 2004Can I use a command button to display my table? If so, what code needs to be used?
View Replies
ADVERTISEMENT
Have Subform Display Query Results With Command Button
Nov 13, 2014I have a form with a subform (FindBuffer_Form) which I built from a Query (FindBuffer_Query) within the query criteria I have the following (Like "*" & [Select the main Batch Number] & "*")in order to search a particular number.
I want to be able to run the Query from a command button on the main form and have the results appear in the subform, If I have the Source object of the subform set to Query.FindBuffer_Query I get prompted twice to answer the Criteria before the form opens, after the form opens the subform is generated as per the search criteria.
Ideally, I want the form to open with no data in the subform run the query from command button and have the result in the subform.
Forms :: Updating Form Properties Dynamically - Command Button To Display Mode
Apr 16, 2014I have a single form which becomes either readonly or editable or addnew using a circular toggle switch. The toggle switch is activated by a command button and the caption of the command button is used as the display of the mode.
The SetAddModeBt is a separate command button that initiates the add mode. The problem is that various form or field properties when defined on the fly are not stored and they get lost when you open the form again. Look at the code below:
Code:
Sub tglEditBt_Click()
'-------------------------------------------------------------------------------
' Circular toggle button to change display mode of the form
' ReadOnly - Edit - Add
'-------------------------------------------------------------------------------
' On Error GoTo NotFound
Dim ForName As String
Dim strSQL As String
Dim FMode As String
[Code] ....
Here the first two cases fail when executing the last statement saying it is not supported.
Command Button Clearing Table?
Apr 27, 2007Is there a way to have a command button on a form, when pressed change all fields in a Table to show unchecked? I am using a Table that has nothing but Yes/No fields in it. If this is possible, what might the code look like? Table name is "InputH-1".
You guys/girls are awesome! Thanks in advance for all your help!
Using Command Button To Open Table
Aug 26, 2005Dear All:
I would like to use a command button on a form to open a table. The name of the table is called "MAJORCODE"
Any suggestions?
Many thanks,
Dion
Coding Command Button To Add A Few New Records To A Table
Nov 2, 2006I have 2 tables, one has a list of comments indexed by numbers.
The second table will be populated with numbers that correspond to the first table based on usage of the form that I'm about to describe.
The form contains several check boxes. Each corresponds to a comment from the first table. If 3 of the check boxes are selected when the command button is pressed, I want three separate new record entries to go into the second table and the data that I want entered is the text in the label that is next to each check box on the form. After the records are added to the table, I'd like to reset the check boxes.
I simply cannot figure out how to code the button to do this.
Command Button To Populate Field With Value From A Table?
Oct 14, 2011What is the best way to get a Command Button to populate a field on a form with a value from a another table in the database?
View 3 Replies View RelatedImport Data Into Table From Excel Using Command Button
May 18, 2006I'm looking for someone to help me with a solution to my problem of importing data into a data table.
What I'd like to do is have a command button on a form. When this button is clicked the records in a table are cleared out. Then I'd like for a browse window to come up to locate an Excel file. The user would select this file and the data would be imported into the data table that was just cleared.
Can this be done without too much trouble?
Thanks, Paul
General :: Command Button To Insert Records From One Table To Another
Aug 11, 2013I have two tables, one is GENETIC and the other one is BoneSampleDNAprofile. Both tables have the field CY-Code. I want to create small form with 2 text box fields and one command button on the form to be able to insert CY-Code from the table GENETIC to designated DNA_LAB_Code in the table BoneSampleDNAprofile.
In that small form I would type DNA_LAB_Code and CY-Code where after pressing command button will insert CY-Code for the designated DNA_LAB_Code. This is continuous process after our Laboratory receive results from DNA laboratory. I have attached two .png files which are example of two tables.
Modules & VBA :: Delete Table Record - Command Button?
Jun 27, 2013I have created a form and need to be able to delete employees from a table. I built a command button using the wizard and this is the current vb code-
Code:
Private Sub cmdDeleteEmployee_Click()
On Error GoTo Err_cmdDeleteEmployee_Click
DoCmd.RunCommand acCmdSelectRecord
DoCmd.RunCommand acCmdDeleteRecord
Exit_cmdDeleteEmployee_Click:
Exit Sub
Err_cmdDeleteEmployee_Click:
MsgBox Err.Description
Resume Exit_cmdDeleteEmployee_Click
End Sub
But when I click on the button I get a message saying it would create duplicate data in the table.
Forms :: Copying Command Button Appearance Properties To Other Command Buttons
Dec 17, 2013I am rewriting an old Access 2003 database in Access 2010. When creating new command buttons, the current theme gives them a default appearance. I need to apply this appearance to old command buttons. I know there is a way to select the default button and apply its properties to others quickly. I have done it before but didn't write the process down .
View 2 Replies View RelatedTables :: Command Button On Form To Run Text File Import Into Table Wizard?
Aug 28, 2014Is it possible to have a command button on a form to run the Text File Import Into a Table Wizard?
View 13 Replies View RelatedCommand Button To View PDF / Excel File Or JPEG From Object Within Database Table
Aug 12, 2013I have created a database for a church cemetery. It contains the usual names, birthrates deaths, etc.... I have also created a map of the cemetery in PDF format with the lot number highlighted which is assigned to a particular record. I did the same in excel with a layout of the lot and a JPEG picture of the grave marker. In my table I created Three columns - Site Plan, Lot Plan, and Grave marker. I insert the specific site plan, lot plan, and jpeg picture using the "insert object" in the table. On my form after a search, I have created three buttons.. Site Plan, Lot Plan & Grave Marker.
I have looked and experimented trying to assign these command buttons to open these files on the form. I don't have any experience with macros or VB code.
Forms :: Display Row Names And Blank Table Until Filter Button Is Pressed
Jan 7, 2015So what I've basically got here is a form with 4 combo boxes and a button that when clicked will filter the results of a table (which is a subform/subreport) based on the values inside the combo boxes. So the problem I have is that when I open up the form it displays a fully filled table but I just want to display the row names and a blank table until the filter button is pressed.
View 2 Replies View RelatedForms :: Command Button To Unlock And Lock Fields / Edit Button?
Feb 19, 2014I have created a web-database (? - There are globes over all the forms and tables icons) based on the Issues & Tasks template. This means that most of the data is entered and seen on the "Main" form, which has two tabs - Open Issues and Closed Issues. I have created a form that allows people at my work to input the necessary data and save it, so that it will show up on one of the two tabs. However, once a record has been created, I want to be initially locked if the ID/PK is clicked, so that data can't be changed or entered inadvertently.
SO, I changed the code so that when the ID/PK for a record is clicked, it brings up a different form, but one that looks exactly like the one that is brought up when entering a new form, but I locked all of the fields so that the information cannot be changed. It seems from what I have read that I can create a button on this form so that when clicked, it unlocks the fields on the form so that they can be changed, and then when clicked again it will lock the fields again. Is this true? If so, how can I do it? Or is there something similar I can do? I have seen codes that I could copy and paste, but I cannot figure out the place to copy and paste codes in Access 2010.
I have changed the Form properties so that Data Entry and all the "Allows" are set to No...
Difference Between A Command Button And A 'label' Button
Aug 12, 2005Hi, I have got a small problem and maybe someone could advise me.
I am creating a customised command button from a label button. The new button works fine but I can't apply the 'requery' function to it, if i do an error occures and i am being prompt to save the data first???? :confused: :
Private Sub Labelsearch_Click()
Me!itemquery.Requery
End Sub
Private Sub Labelsearch_MouseDown(Button As Integer, Shift As Integer, X As Single, Y As Single)
Me.Labelsearch.SpecialEffect = 2
Me.Labelsearch.BackColor = 255
Me.Labelsearch.ForeColor = 10092543
Me.Labelsearch.FontItalic = True
Me.Labelsearch.FontBold = True
End Sub
Private Sub Labelsearch_MouseMove(Button As Integer, Shift As Integer, X As Single, Y As Single)
Me.Labelsearch.ForeColor = 255
Me.Labelsearch.FontItalic = False
Me.Labelsearch.FontBold = True
End Sub
Private Sub Labelsearch_MouseUp(Button As Integer, Shift As Integer, X As Single, Y As Single)
'Come back to initial state when button release'
Me.Labelsearch.SpecialEffect = 1
Me.Labelsearch.BackColor = 16373685
Me.Labelsearch.ForeColor = 8388608
Me.Labelsearch.FontItalic = False
Me.Labelsearch.FontBold = True
End
If I create a command button with the wizard and assign the code :
me!itemquery.Requeryto the on_click event my form is working fine.
Why is his code is not working if I assign it to a label? :o
Display Command Output?
Feb 16, 2005Hello,
I've been attempting to run dos commands from access by attaching dos commands to buttons on a form. That part has gone smoothly. However I have been unable to get the output from the dos commands to display on the form. Any input would be greatly appreciated.
Thanks very much.
Command Line To Display Access Report
Sep 19, 2004I am looking for help to to generate a command line to automatically run a report within a windows program I am using. The program I use has command line fields to automatically open the access report when I complete my program session. I have tested the command line with a standard C:.... .exe to open Word, Access, etc.
I have tried using the create shortcut and snapshot methods without success and wondering if a macro is needed (havent a clue).
Hoping someone can help!
thanks... Keith
Forms :: Input Box Will Not Display Or Stop At Command
Jun 18, 2015NO matter what I do I can't get the InputBox to work
Code:
NewEmailAddress = InputBox("There is no Client Email Address on file would you like to enter one?", "Information Required")
It just won't display or stop at the above command.
Command Button To Set Value
Apr 20, 2006I have been working on this for awhile, and can't figure it out for the life of me!
I have a form set up with a drop down box that lets me pick from values from a table based off of the Primary Key of that table (Row Source = SELECT Order.OrderID, Order.OrderName from Order). I have a button on the form that I want to set a value (Closed) from the table entry based off of the order selected.
Pseudo code would go something like this.
Closed.Value = True Where Table.Order.OrderID = SelectedOrderID
Table.Order is a Table Named Order (obviously)
Closed is a yes/no field in my Order table
OrderID is the primarykey of the table Order
SelectedOrderID is the drop down box.
Any help would be greatly appreciated!
Command Button?
Apr 26, 2005I, unfortunately, have been singled out as the Access guru in my work area. We have 223 people and the Information Manager has tasked me to modify a database he "found" to be able to track a number of things, but most important to him: performance reports.
I have posted the sample of what I currently have. What is being asked of me is a way in which to have a button or by double-clicking a block where a date would go for all other dates on the form to become non-visible while the current date stored in the computer the database is being worked from be entered in the block where the button or double-click happened. All this links to a report for the IM to be able to track what performace reports are out, and when they are due back to his section. He also wants me to be able to show which are overdue and where they are at. I am not sure if it is at all possible, but with me having spend most of last week purusing the articles on Access here, I know now that nothing is implausible if you happen to go about it the right way.
Since I have read the rules on posting, here is what I have done. I searched the forum for command button and got a lot of really cool ideas to use elsewhere in the database. I looked up the help in the program itself for command button, and got some good information on how a command button works, but I cannot make it put a date into a block. I can enter the date in any block that is a date format, but then I have dates in every block. He only wants to see the most current date in any of the blocks.
Any assistance at this point would be appreciated. If I have missed something in another thread, I apologise in advance.
Command Button %
Apr 28, 2005how can i assign a formula to a command button?
also can anyone give me specific advice about calucalating the % of check boxes ticked across multiple records.
thanks in advance
Command Button
May 25, 2005A couple of weeks ago I asked the question of how to send a single record from one table to another (Archive table) using a command button. I got a response. I have had time to work with this a little. My problem is I keep getting a error message "Run-time error '3075'; Syntax error (missing operator) in Query expression "[New ID]='. I wanted to mention that the archive table has an "archive ID" field as well as "New ID" that links the tables. I have the following code. Please help with this if possible.
" Private Sub Command667_Click()
' Save the main record if it has not been saved.
If Me.Dirty Then
DoCmd.RunCommand acCmdSave
Me.Recalc
End If
If MsgBox("Do you want to archive this record?", vbYesNo) = vbYes Then
Dim SQL As String
' Move main record to Grants Activity Archive.
SQL = "Insert into [Grants Activity Archive]" & _
" select * from [Grants] where [New ID]=" '" & Me.ID & "'"
CurrentDb.Execute SQL
Me.Recalc
End If
End Sub "
The error seems to refer to the & Me.ID section. I have tried putting Me.New ID and also Me.Archive ID. The Grants Activity Archives is the subform where I want the record to go. This subform is set up like a form with many fields so it is a lot of work to type the main record from the Grants table to the Grants Activity Archive table every time you want to archive a record. I hope that makes sense.
How Can I Use One Command Button Only?
Feb 26, 2008Hi all
Can any one correct my attached program to make it works with one command button only please?
Using two buttons make conflict.
Any help will be highly appreciated.
Thank you
vbnt
Command Button
Apr 7, 2006Hi I can't seem to be able to find any option to open a table from the command button wizard how is this possible. Thanks
View 2 Replies View RelatedCommand Button
Apr 20, 2006Hi,
How can I make command button on my DAP to use update query that I wrote? :confused: