When Query Returns No Records In Set
Jul 29, 2007
I hope this doesn't sound too simple for this forum, I'm only a newbie!
I have a select query that will display the recordset that meets the criteria (OK I know that's not a big deal) but...I want to know if, when there are no records that meet the criteria, can I open a form (dialog box maybe) that will say there are no records found instead of showing a blank recordset. Once again I hope this is not so blindingly obvious that I have to start watching my coffee intake
Thanks in advance
View Replies
ADVERTISEMENT
Aug 30, 2005
Obvious neophyte issue here, sorry...
I have a table, PURCHASE_ITEMS with 3 fields: ID, TYPE, NAME
Another table, ITEM_TYPES with 2 fields: ID, TYPE
TYPE in both tables is a text field and there is a one-to-many relationship between them.
When I run a query on PURCHASE_ITEMS, I can see all 25 records. When I set a criteria for TYPE to one of the types, no records appear, even though there are 5 or 6 of that type.
Can anyone help me with this absurdly simple problem that I can't seem to get my brain around?
View 1 Replies
View Related
Jul 15, 2013
Suppose I have two tables with fields as follows:
Assigned Courses (Courses that employees should do)Employee number
Assigned Course Name
Fulfilled Course (Courses that employees have done)Employee number
Fulfilled Course
Now I need to do a query that tells me which employees haven't done. Is there anyway to do that that is not an exclude query?
View 4 Replies
View Related
Mar 5, 2012
I have a query that runs just fine and takes about 1 minute to run on average. I have vba code that uses Dlookup to determine if the query returns any records. The problem is that each time it runs it has to crunch all the data, all I care about is if there is any result at all. Is there a way to get the query to stop after it finds one record to speed things up greatly?
View 2 Replies
View Related
Jun 30, 2014
A have a report that is based on a query that works fine when the query returns records.
However if the query (legitimately) returns no records then the report fields (numeric) are blank.
How can i get the query or report to show either "0" or "no data" when no records are returned? I have tried the NZ function but that didn't work so i don't think that is the right approach here?
View 3 Replies
View Related
Jun 7, 2013
I have a tabbed navigation form. I have a form on one of the tabs, [tab1frm] that a query that consists of 6 fields that are each from a different query.as the record source. This shows a percentage field, an image field, and a count field for current month and then then the same fields for year-to-date.
The problem is that when there are no records for the current month, the whole form [tab1frm] is blank. I read that if no records are returned this can happen, but since there are always records returned for year-to-date, I don't know why its happening. Is there any way to make blank fields show up or to show the most recent records so the form is never blank?
View 6 Replies
View Related
Jul 17, 2013
[URL]
My problem is when i use this form as a sub form, it makes the main form close as well. How can I make the main form stay and only the sub form close.
View 6 Replies
View Related
May 17, 2006
Hello all,
I realise this issue is a common one and it is usually down to simple typos (I've looked at several similar posts) but none of the advice I've seen has solved my problem. I've designed the following Union Query:
SELECT [Email],[Title],[First_Name],[Last_Name],[Company],[Phone],[Country],[TEST_AND_MEASUR],[REC_AND_PROD],[LOG_AND_TRANSC]
FROM [Region 1]
UNION ALL SELECT [Email],[Title],[First_Name],[Last_Name],[Company],[Phone],[Country],[TEST_AND_MEASUR],[REC_AND_PROD],[LOG_AND_TRANSC]
FROM [Region 2]
UNION ALL SELECT [Email],[Title],[First_Name],[Last_Name],[Company],[Phone],[Country],[TEST_AND_MEASUR],[REC_AND_PROD],[LOG_AND_TRANSC]
FROM [Region 3];
It should be very simple and I've checked it over and over, but when I run the query an Enter Parameter dialog appears prompting me to enter Email.
If I just click OK I get all the records but with the email field blank.
Similarly if I type x@y.com it returns all records but with the email fields all containing x@y.com
Advice would be very much appreciated!! Thank you in advance.
Abi
View 2 Replies
View Related
May 12, 2014
I'm trying to write record set contents to excel. My query runs perfect in access query wizard, but recordset showing as null. My VBA code
Code:
Dim cnn As ADODB.Connection
Dim recordst As ADODB.Recordset
Dim strSQL As String
Dim strPath As String
Dim appXL As Excel.Application
Dim wb As Excel.Workbook
[Code] ....
View 5 Replies
View Related
Oct 2, 2013
I have a complex database app that has a form called from the main form. It requires two inputs: BeginningDate and EndingDate and I use a calendar picker for date selection. Using data assigned to a variable, I build the SQL query in VBA. The result is:
Code:
SELECT [1733_All Print Orders].[Application], Sum([1733_All Print Orders].[TotalImages]) AS SumOfCCPC
FROM [1733_All Print Orders]
WHERE [Application] = 'CCPC' AND [StatementDate] >= #9/3/2013# AND [StatementDate] <= #9/30/2013#
GROUP BY [1733_All Print Orders];[Application]
[1733_All Print Orders] is a defined query that combines 4 tables together and there are data that falls within the dates for CCPC. But the query returns no records.
I pasted the query to the query builder and using different combinations, I isolated that the [StatementDate] >= #9/3/2013# portion is what returns no records
To complicate matters even worse, prior to today, it worked. I made some adds and changes to another area of the application, but did not touch this code.
View 1 Replies
View Related
Jul 9, 2015
SELECT tbl_Visits.vst_VisitDate, tbl_Visits.vst_Complaint, tbl_Visits.vst_Diagnosis
FROM tbl_Visits
WHERE (((tbl_Visits.vst_Complaint) Like "*asthma*")) OR (((tbl_Visits.vst_Diagnosis) Like "*asthma*"));
returns records with no occurrences of asthma. about 4 of 638 hits.
View 14 Replies
View Related
May 11, 2013
I have two tables with compatible data. Table 1 has 23 records and table 2 has 5 records. I am trying to make a "make Table". But instead of a table with a combined 28 results, I get 115.
View 1 Replies
View Related
Jun 27, 2014
I import data through different files into a table, the data comes in different formats. I have a problem sometimes some records have double quotation marks and carriage returns. I know how to replace them as
Carriage Returns
Replace([FieldName],Chr(13) & Chr(10),""
Double Quotation Marks
Replace([FieldName],Chr(34),""
But if i want to use an iif statement because in the field there could be a Double Quotation Mark or Carriage return then it does not find the record
iif([FieldName] like Chr(34),Replace([FieldName],Chr(34),"",[FieldName])
View 2 Replies
View Related
Feb 25, 2008
The following query never returns, even though there is an index on the name field in the Patient table:
SELECT p.Name FROM sheet4 AS s INNER JOIN Patient AS p ON p.NAME LIKE s.LASTNAME + ', ' + s.FIRSTNAME + ' %'
View 4 Replies
View Related
Nov 26, 2006
I am creating a database for a hyperthetical car hire company. A customer hires a car from and until a certain date. If a new customer decides to hire a car i want to generate a list of cars that he can choose on depending on the other dates from which other cars are hire from and until. I have created a query that generates all of the cars that the new customer can not use.
I have also generated a list of all of the cars, in the database.
I have created a new query takes the numberplates of all the cars and subtracts the numberplates of the cars that are being used.
This is where i hit a problem. For some reason the query is generating the list of number plates twice and then subtracting the numberplates that are being used. This leaves me with with 2 values for every numberplate that can be used and 1value for every numberplate that cannot be used. Can you help me?
Please post your email address so i can send you the zip file as the file is too large to upload. The query that i am having problems with has the title:SEARCH FOR AVAILIABLE CARS.
Thank You
View 2 Replies
View Related
Feb 7, 2007
Hi all,
I think this could be another one of my stupid moments. Here is my query expression -
IIf([WHAT TEAM?]=1,[strCurrent_Team]="FINANCE",[strCurrent_Team]<>"FINANCE")
When run, the user is prompted to enter a team number. If they enter 1, then by my reckoning the query should return all records where [strCurrent_Team] = "Finance".
However, no records are returned.
strCurrent_Team is formatted as text.
Can anyone tell me what I am doing wrong here?
Cheers,
Rob
View 3 Replies
View Related
Mar 5, 2008
Hi, i'm hoping someone here might be able to help me. I have come to a bit of a dead end with a database application i am working on.
The database is a delivery newspaper management system for a newsagents. Basically i need it to link customers to the paper they wish to receive, organise them into delivery rounds, and produce a bill for each customer based on the newspaper they get delivered.
The problem I am currently having is when it comes to the billing.
I have:
a table that stores customer details
a table that stores newspaper details (inc. price)
a table that stores the customerID and then the NewspaperID for each day of the week. (since not all customers get a paper everyday of the week)
If a customer gets two papers then two entries are made in the requirements table under there CustomerID)
Now to fetch the price of the newspaper the customer is down to receive each day and then add these all together is where i have been having trouble.
After many different attempts the solution i am currently using is this. I have a query for each day of the week. Each query take the customerID from the requirements table, then the newspaper price from the table storing newspaper details.
The problem here is that the query returns the CustomerID next to every newspaper in the database. I found the solution was this. I added the newspaperId from the newspaper details table and in the criteria stated "[tableRequirements].[NewspaperID]" And this worked perfectly.
Untill i added a customer who gets two papers. As far as i can tell the query is returning all the possible combinations of which newspaper the customer should get.
Any help with this would be greatly appreciated - thanks in advance.
View 1 Replies
View Related
Nov 3, 2011
I am trying to find an Access solution to handling the MAX 2/3rds (I.E. 2from3 or 8from12 etc) returns from a series of "Scores" of a league table which will have many players, playing in many matches. I have created a crosstab query which delivers the total scores for each player from each game and played around with a make table query and a report output which I have used in excel to deliver the best 2/3rds of the scores. As others will be using the completed data base I would like to keep the solution within Access but I cannot work out how or if this is possible. Below is a limited output from the crosstab query showing the Total of all games played which I wish to turn into best 2/3rds.
View 5 Replies
View Related
Apr 9, 2007
Hi,
I'm trying to create a database project for college and have run into a problem with a query. I am trying to find all bookings that have taken place in the last month, but with added details from other tables.
I have taken the job details and date (with validation for the last month only) from my Jobs table, and this works perfectly. However, when i try to match customer IDs to their names (stored in a seperate table), Access returns the same job multiple times with every customer name possible.
Any help you can give me to return just the one result needed would be greatly appreciated.
Mompo
View 8 Replies
View Related
Nov 9, 2007
This is at least the 3rd time I've come across something that is, to me, an extremely serious bug in Access. Anyone else seen this, and anything I can do to avoid it??
In a query, I ask for the values from Field A.
The query returns the values from Field B, but still calls it Field A.
This is in a fairly complex query. If I delete one particular field from the query, the bug disappears. If I put that field back, the bug returns.
Here is my current query:
SELECT ByPN_1.PartNumber, ByPN_1.LostPerSetup, ByPN_1.ActualMachine, ByPN_1.PermQty, ByPN_1.FirstOfFeederSize, ByPN_1.Leaf1, ByPN_1.FirstOfType, ByPN_1.NonPerm, IIf([nonperm]*[concurrentsetups]<1,1,CLng([nonperm]*[concurrentsetups])) AS QtyIfDed, [nonperm]*[setupsperday] AS MaxLoadsSavedPerDay, [qtyifded]*[setupsperday]/[concurrentsetups] AS DedLoadsSavedPerDay, IIf([maxloadssavedperday]<[dedloadssavedperday],[maxloadssavedperday],[dedloadssavedperday]) AS LoadsSavedPerDay, [loadssavedperday]*[laborrate]*[loadunloadperfeeder]*250/60 AS Labor_Annual, master_attr.STD_COST, [loadssavedperday]*[lostpersetup]*[std_cost]*250 AS Parts_Annual
FROM (ByPN_1 LEFT JOIN FeederCost1 ON (ByPN_1.ActualMachine = FeederCost1.Machine) AND (ByPN_1.FirstOfFeederSize = FeederCost1.Size) AND (ByPN_1.FirstOfType = FeederCost1.Type)) LEFT JOIN master_attr ON ByPN_1.PartNumber = master_attr.ITEM
WHERE (((ByPN_1.PartNumber)=107573));
HEre's the pertinent part of the record from BYPN_1:
PartNumberLostPerSetupFirstOfFeederSize
107573 3 12X4
But here's what the query returns:
PartNumberLostPerSetupFirstOfFeederSize
107573 12X4 12X4
Now, if I just delete the "parts_annual" field from the query:
SELECT ByPN_1.PartNumber, ByPN_1.LostPerSetup, ByPN_1.FirstOfFeederSize, ByPN_1.ActualMachine, ByPN_1.PermQty, ByPN_1.Leaf1, ByPN_1.FirstOfType, ByPN_1.NonPerm, IIf([nonperm]*[concurrentsetups]<1,1,CLng([nonperm]*[concurrentsetups])) AS QtyIfDed, [nonperm]*[setupsperday] AS MaxLoadsSavedPerDay, [qtyifded]*[setupsperday]/[concurrentsetups] AS DedLoadsSavedPerDay, IIf([maxloadssavedperday]<[dedloadssavedperday],[maxloadssavedperday],[dedloadssavedperday]) AS LoadsSavedPerDay, [loadssavedperday]*[laborrate]*[loadunloadperfeeder]*250/60 AS Labor_Annual, master_attr.STD_COST
FROM (ByPN_1 LEFT JOIN FeederCost1 ON (ByPN_1.ActualMachine = FeederCost1.Machine) AND (ByPN_1.FirstOfFeederSize = FeederCost1.Size) AND (ByPN_1.FirstOfType = FeederCost1.Type)) LEFT JOIN master_attr ON ByPN_1.PartNumber = master_attr.ITEM
WHERE (((ByPN_1.PartNumber)=107573));
Now the query returns what I expect:
PartNumberLostPerSetupFirstOfFeederSize
107573 3 12X4
View 14 Replies
View Related
Jun 11, 2014
I'm trying to assign the result of an SQL query to a variable using VBA in Access. The query returns a value but the variable which it is assigned to has a value of Nothing. Here is the code snippet:
Dim queryReturnID As String
queryReturnID = "select dbo_tbl_SupplierReturn.ReturnID from dbo_tbl_SupplierReturn" & _
" where SupplierID = " & lstPOHdr.Column(1)
Debug.Print queryReturnID
Dim RecordSet1 As DAO.RecordSet
Set RecordSet1 = CurrentDb.OpenRecordset(queryReturnID)
View 3 Replies
View Related
Sep 7, 2005
I am running a report based on a query. When the query returns zero rows, the count function in the report gives an error. Probably a simple solution but I've searched and can't find an answer. What do I do to stop the report when there is no data?
View 1 Replies
View Related
Nov 15, 2005
I looked thru the forums and didn't seems to get what I needed;
I want a count query to give me all fields in "group by" column, and assign 0 to where there are no count for certain fields.
I tried to set Outputallfield to "yes" but got an error message saying that there is a data type mismatch. The query ran just fine when outputallfield was set "no" and gave right results.
Can anyone help, please?
View 14 Replies
View Related
Oct 29, 2007
I'm trying to execute a query which is looking at data from 2 different tables and most of the data fields in the tables are the same. For instance table 1 has Dept, Res, Period_date, & Available Hrs and table 2 has Dept, Res, Period_date, Project & Forecast Hrs. The results I'm looking for are as follows:
Dept Res Period_date Project Forecast Hrs Available Hrs
11 A 11-02-07 123 XXXXX
11 A 11-02-07 456 XXXXX
11 A 11-02-07 789 XXXXX
11 A 11-02-07 012 XXXXX
11 A 11-02-07 XXXXX
But the "Available Hours" are duplicated in the preceeding 4 rows.
Thanks for any advice on this.
View 5 Replies
View Related
Apr 30, 2014
i want to write a query that display records for only last date entered in a table and i want to show all the records from last date entries in a table.
View 6 Replies
View Related
Jul 27, 2014
I have a query which returns values from a table, as follows:
Service_Date
Supervisor
EExpect
EAchieve
OExpect
OAchieve
IntLossOP
IntLossEN
This is used for a report for a 28-day period (the query selecting the Start Date and the End Date), and the intention is to show the information grouped by Supervisor, showing the information for as many days as they worked.However, I would like to have the overall 28-day averages of the six fields EExpect thru to IntLossEN shown underneath the detail for each individual. I know I could do this in Access Totals in the page footer if the report was confined to one supervisor, but with up to 20 supervisors I am unsure how to get these totals after the detail for each?
I would also like to have this summary information for each individual presented on a separate page at the end of the report (almost like a league table, if you like), so there is a single page that shows the data for each supervisor in comparison to all their colleagues.
View 7 Replies
View Related
