in an initials field... i want it so that it could automatically increment the 3 letters to uppercase... how? if it can't be done in a table where can it be made (i.e. in a form, query etc)
View RepliesHi There
Looking to see if there is an easy solution to this problem I have.
I have a table which holds order information, the primary key for this table is orderID which is an autonumber.
The field in question is order number, which has a default value of "JJO"00000, which I have started manually at JJO10001, is there anyway i can get my database to automatically increment this number to save me from keep checking the last order number produced.
Lost count of the number of times I have gave the same order number to numerous customers.
Thanks
I want make one database about office register. I gave primary key for auto increment serial number . That is working fine. Now problem is some times I want delete client name in between table .That is maybe first row or 5th row or anywhere . at the time the row deleted which is i was selected but the primary key is not update . for example I want delete 8th row . after deleting I not seen 8 in primary key place i have seen only ....,5,6,7,9,10...... etc. how to give auto increment and decrement in the primary key......
View 3 Replies View RelatedI am new in ms access , I want make one database about office register. That is Have done . I gave primary key for auto increment serial number . That is working fine. Now problem is some times I want delete client name in between table .That is maybe first row or 5th row or anywhere . at the time the row deleted which is i was selected but the primary key is not update . for example I want delete 8th row . after deleting I not seen 8 in primary key place i have seen only ....,5,6,7,9,10...... etc. So how to give auto increment and decrement in the primary key......
View 2 Replies View RelatedStupid I know...but I forget how to update a Field to itself in Uppercase..
Anyone?
Thanks!
Hi All,
How can I report on records which have uppercase values in a record. The data I have in the table is a mixture of Titlecase and UPPERCASE. I need to report on the uppercase values.
Thanks,
Evan
I would like all of the text in my database to appear in upper case. I used the > symbol in the format of all controls and in my tables also. However, on my form's lookup combos it doesn't work. When I click the dropdown it shows all selections in upper case, but after I select it turns into lower case again.
I then tried using Ucase and strConv but those don't seem to work with my combos either.
I have searched and these are all the suggestions I could find on how to do this, does anyone know another or possibly what I am doing wrong?
I am as new to MS Access as you can possibly get so please forgive such a simple question. I created a table in Design View. On one of the fields in the table I want to restrict the values that the user is allowed to enter to either a capital Y or a capital N so I created the following validation rule in design view:
=UCase("Y") Or UCase("N")
No matter what I do, the data sheet view allows me to enter a lower case Y or a lower case n. How can I make sure that this field only accepts a capital y or a capital N.
Thanks
In a form I have fields name, first name in which I would if necessary want to put the first letter of the name and/or the first name in uppercase. I created for it a buttonUPLOW How to synchronize this action.
Code:
Function MiseEnMajuscule(Chaine As String) As StringDim
nCar As Integer
'Compteur (position dans la chaine traiter)
Chaine = Trim$(Chaine)
[Code] ....
Hi Everyone:
I have a project of migrating our Access data to Oracle. One of the pre-reqs the boss wants is to uppercase all of the column names (Field name) for all of the tables. I want to avoid manually going in all the tables and changing the case of the columns because there is like 300 tables where dealing with. I was wondering if in Access..is there an efficient way of converting my column names to upper case via script? VBA or Macro?
I have a textbox called "name", what i am trying to do is have lowercase on first/second names in the textbox except the last word (surname)this i want in uppercase.
View 1 Replies View RelatedIm linking to sql across ms access and I have all records uppercase.I need to set StrConv with first character uppercase and every other lowercase which is not problem.
View 5 Replies View RelatedI've got an address box on my form. When someone enters 'London' inside the box, I want only 'london' to be changed to all-caps.
View 5 Replies View RelatedI have the following code of my holiday calendar however I would like to convert the month into uppercase. I know about the 'Ucase' function but I am fairly new to this and have tried to place this within the code but with no success:-
With theReport
.Controls("labelMONTH").Caption = Format(StartDate, "mmmm")
I want to change text in txt boxes. when a new customer is being created we are too lazy to put uppercase in. so i want to change the text so the first letter is uppercase. i have used this on every event and it doesn't change a thing.
PHP Code:
Private Sub txtTown_AfterUpdate()LResult = StrConv("TECH ON THE NET", 3)End Sub
Private Sub txtPostcode_AfterUpdate()LResult = StrConv([txtPostcode], 1)End Sub
Private Sub txtStreet_AfterUpdate()LResult = StrConv([txtStreet], 3)End Sub
Private Sub txtFirstName_BeforeUpdate()LResult = StrConv([txtFirstName], 3)End Sub
I have this at the top
PHP Code : Option Compare DatabaseOption ExplicitDim LResult As StringDim LResponse As Integer
is it possible with transform, only uppercase text contained in a report textbox, to bold? How? Through VBA?....
View 1 Replies View RelatedHi All
How to assign value to a field based on the value of the same field in the previous record?
Autonumber has its limitations for my purpose. Because, after I start filling up a form, I some times cancel the form filling process, and it affects the continuous numbering.
I guess the issue can be resolved by using some thing like record count facility. i.e. current' record's field value = number of records till previous record + 1.
How to exactly codify or execute the above by vba coding.
The Field Name is "SerialNo.", and Table Name is "StudentData"
Thanks
Padhuka
I have a database that has a few tables and in one of them (Originators), there is all the info about my loan originators including there comission level. I would like it when they turn in a certain amount of loans there commision level will increase. Is this posible? Here is my DB setup.
Tables:
Originators- 1 to many-
OriginatorID,FirstName,LastName,OrigSSN, Address,City,State,PostalCode,HomePhone,WorkPhone, CellPhone,FaxNumber,EmailName,BirthDate,Level(This is the commision level, and its in %).
Customers- 1 to many-CustomerID,FirstName,LastName,SSN,HomePhone,MobiPh one,FaxNumber,Address,City,State,Zip,Email,BirthDa te,CreditScore,SpouseFirst,SpouseLast,SpouceSSN,Sp ouceBirthDate,SpouceCreditScore,OriginatorID.
Loans- many to 1-
LoanID,LoanType,StartDate,EndDate,LoanLender,Custo merID.
Lenders- 1 to 1-
ID,LoanLender.
When a customer is added to the DB it is done with a form that has OriginatorID(which is autocreated), CustomerID(also auto) and some other of the customer stuff like phone numbers. When this happens I would like to have the originators % level increase, say after every 4 customers entered. Is it possible?
Thanks,
Scott
I am importing an Excel file with existing data using the Import wizard to build my table. It has an ID field (CID) which I would like to keep and set to auto increment starting with the next number.
Can this be done ?
Hi,
Need a little help with rounding up. In A2K I have a form with a textbox that displays a security deposit. Security deposit is calculated by rounding the payment to the next $25 increment, hence a payment of 324.53 should have a security deposity of $325.00, but a payment of $325.01 should have a security deposit of $350.00. The code I am using for a datasource for txtSecurity deposit usually works correctly, but for this payment ($324.53) it rounds to $350.00. Here is the code..
=(([txtPayment]25)*25+[txtSecDepRndTo])
txtSecDepRndTo holds the $25 incremental value.
Incidentally, if the payment is $324.49 my code rounds the Security Deposit to $325.00 as it should.
Any help would be greatly appreciated.
This is the problem. If I have a field that contains something like this:
GHP-K-0000D
How can I make the number portion (0000) increment by one when a check box is checked?
Thanks in advance
i have 2 field "CLIENT ID" and "CLIENT CODE". when i post a new record, i want the "CLIENT ID" and "CLIENT CODE" to merge to give me 1 field "CLIENT". the CLIENT CODE should be prompted for eg. THO or BLT and added to the CLIENT ID which will compose of 001 or 002. The CLIENT ID should also increment when each new CLIENT record is posted.
The example should make things clear.
CLIENT ID CLIENT CODE CLIENT
001 THO THO001
002 THO THO002
001 BLT BLT001
it should look up the last CLIENT value and then for the new record just continue on the previous entry.
Hi
I have a numeric field called FileNo and an autonumber field called FileID in a table called tblFile.
I also have a lookup numeric field called FileTypeID (with values 1 or 2 or 3) on another table called tblFileType.
I need the value of FileNo which I am showing on a Form frmFile to change dependant on the value of the FileTypeID
i.e. If FileTypeID = 1 FlieNo should start at 100
If FileTypeID = 2 FileNo should start at 200
If FileTypeID = 3 FileNo should start at 300
Then when I create a new record I need to increment by 1 the value of FileNo according to the FileTypeID
I've setup a button and attached this code to its onclick event but it only works as long as I don't change the FileTypeID
Dim B As Integer
Dim H As Integer
Dim N As Integer
Do While FileID > 0
DoCmd.GoToRecord,,acPrevious
If FileTypeID = 1 Then
B = FileNo
Else
If FileTypeID = 2 Then
H = FileNo
Else
If FileTypeID = 3 Then
N = FileNo
End If
End If
End If
Loop
DoCmd.GoToRecord,,acLast
If FileType = 1 Then
FileNumber = B + 1
Else
If FileType = 2 Then
FileNumber = H + 1
Else
If FileType = 3 Then
FileNumber = N + 1
End If
End If
End If
ViRi
Hello,
Can someone tell me how I can change the increment in an existing database.
The PK is currently Auto ID with each new record currently 1001, 1002 and so on.
What I am trying to do is say starting monday the next new entry begins at 5003 versus 1003, in essence I am trying to change my first number to a 5 versus a 1.
Is this possible?
Thanks..
Fen How
A short question deserves a short answer:
DMax
I'm not sure if it's a simple task, keep in mind I'm new to using access. We have a need at work for a small db just to keep track of some things and access seems appropriate.
I was attempting to set up the primary key in a date / increment format.
Basically the format would be year, month, day, increment (starting at 001)
060125-001
060125-002
060125-003
etc
next day I would like the key to change according to date and reset the increment to start again at 001
060126-001
060126-002
etc
I do realize they are different data types, I'm just not sure how to attack setting it up. Thank you in advance for any help / suggestions. :)