in my db i have used in one scenario two separate forms to fill in one record in a respective table.
the user fills out the details in the first form for record 1, presses NEXT, and fills out the remaining details in the second form for record 1.
every time form 1 will be opened, it will need to be at the end of the records (to add a new one of course) so i have used this code in my form 1 open event DoCmd.GoToRecord , , acNewRec
this is fine. however, i have a dilema. when i place that code in form2 also, it skips one further place to the next record(record 2).. and if i dont put any code in form 2, it will always display the record that has just been added previously..
so basically what i need is something to tell form 2 to carry on adding details into the same record that form1 was just on..
I have a switchboard and when I click a certain button ... it opens a prompt popup.
In the popup you enter the required "item" and you hit enter or "ok"
It then does a search for the specified "item" and brings up that information. At that time I would like to have a calculator pop up for the user to use. (newb) How in laymans terms do I get this to work ?
In my "forms" Design View I have: Switchboard and Calculator
In my "Queries" I have query 1
In the tables section I have : Sheet one (this is were the query is getting its search info from. Switchboard items
Is there something I can add to my query to get it to open the calculator form ? Or is there some other way without using additional buttons to do this.
OK, the syntax below works awesomely in a form. The SSN number is pulled from the main table and dropped into a bunch of text boxes. The only text box that is bound is called [sub#] and is stored in the supervisors table, 6 sub's per supervisor and the supervisors SSN is a child of the main table (tried to keep redundant data to a minimum). Now I need to know if there is any way to perform a similar trick in either a query or report using the [sub#](SSN equal to that of a main table entry) field to call up the record from the main table or from a query to use in a report?
Example of working syntax from form... Private Sub Combo48_AfterUpdate() Rank1 = Combo48.Column(4) Sub1 = Combo48.Column(0) Last1 = Combo48.Column(1) Rank1 = Combo48.Column(4) First1 = Combo48.Column(2) MI1 = Combo48.Column(3) EPR1 = Combo48.Column(5) Rating1 = Combo48.Column(6) Next1 = Combo48.Column(7) End Sub
Can you step into an Event Procedure line by line in Access? I toggled the Breakpoint at the End Sub of the Event Procedure, clicked in the middle of the sub, and pressed F8. Nothing! I do this all the time in Excel.
I have been struggling with what should be a very simple task, at least I would think so. Here is what I have. My customer provides me a rolling 8 week forecast. It looks like this.
So you can see that the first week is always the closest to the current date, and every week a new forecast comes out. The problem is, there are over 900 rows for each 8 week rolling forecast (lots of parts and ship to locations).
I think the best way to handle this is to use Access Database and query the data. But I can't seem to get the query right.
I would like to be able to compare the closest week's forecast with the actual quantity bought. Which means I need to line up the calendar week of the forecast given date with the calendar week of the forecast week. I have attached an example.
So you know, I have been using pivot tables for a year now, but the excel file is 50mb and I am out of rows...so access would be nice. Plus, once I can get this figured out, I will be able to link it to my consumption table and generate on the fly reports for management.
It's been a while since I've been on the boards. Good to see lots of the same folks are still here. :D
I've got an interesting problem. I have a sub that calls another sub. Pretty simple there. The problem is that when sub A calls sub B, sub B does not appear to run. This is all sub B does:If Not IsNull(Me.txtNumber) Then Me.txtNumber = Me.txtNumber + 1 End If The weird thing is, sub B runs just fine if I run the sub B in step mode. If I set a break point and use F8 to step through the code line-by-line, it runs just fine. If I take out the breakpoint, the code no longer works.
Anybody have any ideas? I'm running Access XP Sp2 on Windows XP SP1. Thanks.
Hi I have a set of membership records which have data input via a simple form. When looking for a particular record I use the standard Find menu item on the whole record set from the Form view, and move through the results using the Find Next button. Is there a way to move back through the records when I have got to the end of the results. eg. there may be numerous members with a surname Smith and I can move the the Smith records by using Find and Find Next but if I have moved past the record that I want is there a way of stepping back through the records? Apologies if this is a really obvious question
Set Conn = Server.CreateObject("ADODB.Connection") Conn.Open("Provider=Microsoft.Jet.OLEDB.4.0; Data Source=" & Server.MapPath(" coordinatordbTC.mdb")& ";PASSWORD=123456") ================================================== ===================================
I have been trying solve this problem for a few days. however, the best i can come into is the above code, however , the following error still approached me.
================================================== =================================== Microsoft JET Database Engine error '80040e4d'
Cannot start your application. The workgroup information file is missing or opened exclusively by another user.
I'm new to access, and have discovered its easy to write large queries by breaking them up into smaller queries and having each subsequent query reference the one before it. My problem now is that I want to combine these queries into a single query, so as to make it easier for anyone who comes after me to edit/understand what was done. I can't seem to find a good explanation of how to do this, but it seems like there should be a way.
Basically I have a Customer Form, which I have a New party button on it,this button opens up the party form to a new party, what I would like it to do is open up a new party but make the new party for the customer I had selected in the previous form.I have tried the GoTo macro's but cannot seem to get it to work.
I am thinking on clicking the button it will need to get the Customer ID, and then open the party form, create new party, and paste in the Customer ID, which then updates the Name - Date - Address - Company Fields.
I have been tasked with creating a tool to analyse mobile phone bill data and present the analysis, and our recommendation, to a customers. Being new to Access (other than basic tuition) this has been a slow uphill task, which is finally nearing completion, however there is a problem which I have not yet been able to overcome.
The requirement is for the DB to open first on a splash screen (lets call it Form A) with fancy picture where our customer is selected from a combo box, the customer is then telephoned, a linked computer screen is established and our staff then click "Go" to proceed to a second form (Form B) showing an account overview and more details.
The problem I have is when "Go" is clicked, the second form loads via on click event, and even populates the correct customer in its combo box. Unfortunately that is as far as it gets - the combo does not look up the information. The customer needs to be selected again for the subforms and subreports to load with the customer overview. To clarify, form B just sits there blank until the customer is re-selcted from the combo box in form B.
On the form: User enters first name, then last name. Upon updating the last name field, I would like another form to pop-up and display all the people with that same first name and last name that the user just entered.
On the pop-up form: All of the matching first names/last names are listed with a button control beside each record that says 'Select'. The user clicks the select button beside the record he/she wants. This pop-up form closes and all of the data from this selected record is now showing on the original form.
So far, I have a query/form that pops up only showing the matching first/last names. I'm having a hard time getting my original form to auto-populate with that record that the user selects on the pop-up.
(Also my main form is actually a sub-sub form - so in my trials I could've been massacring my syntax trying to point to it.)
I am trying to create a user form with sub form using the form wizard. I have only 2 tables, Employee (main table) and Vacation (subform table). I pick the fields from Employee Table then fields fro Vacation, but the wizard treat the Vacation as main form and Employee as sub form.
I have a fault form which the user enters details of a fault. When the fault form is submitted the data is saved in the relevant table and the form is cleared so that the user can enter the next fault. On the fault form i have a subform which displays the faults previously entered by the user. I want the user to be able to click on an entry in the subform and open the orignal fault form and see the data that had been entered. How can i create this functionality??
how to make my form controls change size / position as my form is resized / loaded on a computer with a different resolution. Several of the tutorials out there suggest putting code on the "on resize" property of the form. When I looked at the Northwind database to try to mimic their code however, it looks like they must be doing something different as there is no on resize code under the form properties and I was unable to find the code they do use.
I have a bound form which is from tblEmployee, I'd like to have a dataset below (like a splitform but not a split as they have limits) so when i search in the box it gives me say all the smiths - i select for example david smith and it displays his information in the form objects above so they can be edited?
I have one table containing name of restaurant with its address etc. Then i created another table to list out the restaurant workers names and details. Just as an example,
Table:Restaurant Restaurant name Address line 1 Address line 2 Restaurant # Website
Table:StaffContact Staff Role Name speciality email phone
I have the main form that has all the restaurant details only. And i have another form containing the Staff information. Please note the two table have a relation and it works well.
Now to make it user friendly(basically easier for the lazy ones), I dragged the staff contact form on to my main form and displayed it as a datasheet(basically a sub form).
Now, my boss does not want users to add/delete on this sub form(datasheet). So,he wants me to create buttons to open new record of staff for each restaurant(new form)
My issue is with opening a new record to enter a new person to the staff list and give them a role as well in form view.The new form has
So i ran a Macro, with open form with Where condition
What I would like to do is create a list box that will only display the information from another form that is related to the current form.So I have a form call Equipment Catalog and that form is related to Equipment features 1 to M relationship and the Equipment Features is related to a Features form M to 1.
So what I want to do is display all the related equipment features in a listbox that is related to the current PK of that form.So if there is only one feature on one form the list box will only display that one item however is there is 6 features on another it will display all 6.I have been trying SQL and Queries but I still can't get it to work.
Can I look up and verify data on a "second" form based on a selected record from first (still open) form.
I am trying to allow users to select a User Name from a combo box list and then open "Change Password" form when they select "Change Password" for that selected user name.
My problem is that I can't figure out how to associate and verify the data tied to the user name selected on the previous (Login) form ( I am trying to validate the old password tied to that selected record).
I have the first login form created, and it's working just fine. I also have the change password form created (and it's displaying the user name selected from the first form using:
Code: Private Sub Form_Load() With Forms![frmLogin]![cboUserName] Me.txtPwdChgUserID = .Column(2, .ListIndex) End With EndSub
I also have the code written to validate and confirm old password, new password and validate new password (when the save button is clicked). I have yet to update the password with the new password (still trying to figure that out).
Attached zip file has screen shots of the two forms.
When I right click a row on the data sheet side of a split form an select "New Record" I want the curser to go to the first field on the single record side. I've placed this in the OnCurrent but it did no good.
Code:
If Me.NewRecord Then Me!Descrfiption.SetFocus. End If
Any way to set the focus to the single form Side of a split form?
The user will be creating a new project that contains a bunch of releases. The releases have standard names which are stored in a table tbl_ReleaseNames It should be noted that the list of names is not static.
The user selects which of the releases pertains to their project and then based on their selections, new records would be created in tbl_RFP_Release and then a subsequent form would open where it would display each of these newly created releases where they could enter additional information. I thought of creating an unbound checkbox associated with each of the standard names, and then checking to see if the checkbox was checked and then creating the new records followed by opening up the new form.
I am very new at Microsoft Access. I have two forms, A and B, that are filled out by two different users. Form A gets filled out first than form B gets filled out. Each has a name box as well as a birthdate box and a few other similar text fields. However, each form also has a few distinctive fields. I was wondering how I could input the common information in Form A to Form B so the user of Form B does not have to spend time retyping the name and birthdates again. In other words, I want to synchronize the similar records between the two forms. I would like the values to appear in a table as well. I would greatly appreciate it if someone could help me with the visual basic code. Thank You.
I have a button on a form which calls a module to show a calendar form. The user picks date and time, and saves it. The calendar form closes and adds the date and time to a text box on the initial form.I want to save the record so that the underlying table/query is updated, but it's not working. The record is not saved until the initial form is closed.Here's the form vba...
Code:
Option Compare Database Option Explicit Private blnFlag As Boolean, blnSaveIt As Boolean Private Sub btnDelete_Click() On Error GoTo Err_btnDelete_Click
When I'm applying a sort and filter in a form, Access is updating the Filter and Order By properties of the form, so that it is possible to re-use in conjunction with Filter on Load and Order By on Load properties. However, a consequence of this is that when the form is closed, it prompts the user whether they want to save the design of the form. I want to circumvent this as I don't want to re-use the sort and filter and I don't want to be prompted to save the design of the form.
Although I can circumvent this by closing the form using a method that doesn't prompt for saving, the additional complication here is that the form in question is in the Navigation subform of a Navigation Control. Hence when I click on a another Navigation button, it (not me) closes my current form and hence prompts me whether I want to save the design of the form (if I have been sorting and/or filtering). I can't see how to circumvent this and the prompting is resulting in unacceptable usability.
I want to use buttons on a form to change the sort order on a continuous form. In the buttons click event I am using a public function (named Sort_1) to change the sort order. The first element of the event call is the name of a generic query (named Sort_1_Query1) and the query field to sort (LAST_NAME OR FRIST_NAME, depending on the button.)This is the Click Statement.
=Sort_1("Sort_1_Query1","LAST_NAME")
This is the Public Function Public Function Sort_1(SortName As String, FieldName1 As String) DoCmd.ApplyFilter SortName, FieldName1 & "between 'A' and 'Z'" End Function
I think the problem is in the use of quotation marks or trying to pass the query field name to the Do Command or the use of an ampersand.
