Hi,
I have build system DSN for SQL Server.I want to link table to the DSN.
But I can not select the DSN when I start the 'lined table Manager",I only can select files.why?
Please let me know how to link table to system DSN.
Thanks
Mark
I would like to use a local Access front end to edit tables linked to a SQL Server database located on my Internet host provider's server. I haven't been able to find any information about how to do this or whether it is even possible.
If I need to set up an ODBC source, how can I do that for a non-local (Internet) SQL Server database?
Can anyone help?
Hi,
I'm trying to establish the link from my local mdb to an mdb on a commercial server I'm using.
The problem is there's no way to locate the remote access database when using the Link Table wizard.
Anyone knows how to establish that connection??
Thanks in advance!
Hi all,
Is it possible to make a backend/frontend access system and putting the backend on a remote internet server.
E.g. http://www.mysite.com/database/backend.mdb
Because when I try this I keep on getting a message "Not a valid file name."
Any suggestions apart from RTFM?
Thanks,
Bud.
I am splitting a database and have created the Back end already. When I create the front end and link to the tables on the back end... The front end does not link to all the tables in the back end. The list that comes up when creating the linkings does not show all the tables in the back end. What would cause this?
View 1 Replies View RelatedI have A db that links to a SQL Server table via an odbc connection. The problem is that I have to set up the odbc datasource on each machine that needs to run the db. Can I set up an ADO connection to the table and use that connection as a record source through out the app to drive forms , reports, etc? (And this would eliminate the need to set up and odbc connection to the table on each machine...) :confused: :confused:
View 6 Replies View RelatedHi,
Current situation:
We have various departments using a Db and some of the users have drive mappings to different to others (company reasons). So far we have had to create different front-ends for each section, not very useful for updates etc.
What I'd like:
To be able to link to the tables on the server using the server name and not a specific drive letter.
My question:
Is this possible some how?
Would using SQL server for the back end be a way of getting round this issue?
Thanks for any assistance as usual
Matt
Hi Guys,
I am new to this forum and I am hoping you can help. I have produced an Access 97 database on a PC on the hard drive (C I have sent this to a client but he cannot run it as the backend data files are in C: and he is running the whole access programme on the R: drive. As the front end is an MDE file is there anyway I could write the path to the linked files so that access can find them automatically. The same problem applies with the help files, how can you define the location of the help files when you don't know the end users server location?
Any advice would be most welcome.
Regards
Chris
I try to insert object (jpg file) to an (OLE datatype) field but it gives error message (OLE server) is not registered>
View 3 Replies View RelatedI am in need of some assistance regarding SQL Server ODBC links and security. This is for a project at work...
1) I have an MDB that has linked tables through ODBC to a SQL Server 2000 database. This is how I chose to write this multi-user application (instead of the ADP method).
2) My IT department created a user ID that the application will use to connect to the database. They chose this method instead of having to create many user accounts with varying permissions. I have programmed permissions within the application.
3) After linking the tables through ODBC, it defaults to my Windows User ID for the connection. Because of this, I have used a connection string with the application's User ID/Password and perform a RefreshLink on all linked table definitions on startup to ensure valid connection.
This is successful, but my IT department is seeing that another user is attempting access to the SQL Server database--the username in the LDB/MDW file! This is what I don't understand. If I open the database without going through workgroup security, the word "Admin" is passed and the authentication fails. If my users would login through the MDW file, their user IDs would be passed and again, authentication will fail as they are not valid users (only the application ID would be valid).
What is really going on here? :confused: How can I prevent the "Microsoft Access User ID" from being passed through the ODBC link?
Here is a sample of the connection string I'm using:
Driver={SQL Server};Server=ServerName;PersistSecurityInfo=Yes; AnsiNPW=No;Database=DBName;Uid=Username;Pwd=Passwo rd;
Hi all,
I have faced with one problem that is how to export Tables from SQL server to MS-Access.
could anyone plz help me
Thanks,
Bhaskar.
Hi
I have 5 PC clients and a server.each user upon shutting down his PC,is prompted to send all the information inside a table "Patron" to a table inside the server.That way each user backs up his information to a table inside the server and at the end of the day,the table on the server side contains all the data from the 5 PCs.I am new to access,can anyone guide me through the steps I need to accomplish this project?
thanks in advance
I want to work on SQL Server tables located at my work place at home using Access. My question is; is it possible to link SQL Server tables on a server to my lap top computer using "Remote Desktop" or will I need to install Access onto the server and if tables can be linked using Remote Desktop how do I link them? I am using Access 2010 and have Windows 7 professional installed on my lap top.
View 3 Replies View RelatedHi you geniuses!
I just had to upsize my loved and complex Access database to SQL server 2000 and had to link all tables via ODBC into my client Access database.
I used to use pessimistic locking on all tables when the tables were in an Access database before - worked fine ...
but now my client Access database uses "No Locks" on these tables because they are controlled by SQL server 2000.
Does some genius know how to change this bad behaviour? :confused:
We are sharing an Access 2003 database amongst two departments that contains twelve (12) tables that are SQL Server linked tables. Nine (9) of the tables work just fine for people in both departments. Three (3) of the tables cannot be opened until the user refreshes the link(s) using their ODBC DSN.
We do not understand why nine of the tables work without issue but three will not.
Has anyone ever run into this issue before? Does anyone have any ideas on how to resolve this issue?
Thanks
I have an access front-end package that works just fine but if there is an update, I just want the program to run scripts to update the SQL Server tables that it is connected to. I just don't know how to do this. I know how to do this on SQL Server Management studio and all, I just was hoping I could do it straight from my access front end so that a user could just click a button and update the tables or something.
View 9 Replies View RelatedI have an Access 2010 front end with linked tables via ODBC to a SQL Server back end. Is it possible to add, delete, and otherwise alter the tables on the SQL server from the Access front end? I've tried the following but received an error "cannot execute data definition statements on linked data sources"
DoCmd.RunSQL "alter table [dbo_tblAccountsMvOld] add column [cnt] byte;"
Is there code that will let me do this?
Hi all,I'm trying to attach some table from a Sql Server database, but when I take a look to the content, I see all the fields filled by the value "#CANCELLED".I supposed that the matter of such an issue could be the datatype used for some fields, a user-defined datatype. The only table content from the same Sql Server database I can see does not use that data type. I'm using a read-only account to access the Sql Server database. If I try to import the table, the data are imported correctly and the user-datatype is converted to text.Any suggestions for a solution / workaround ?Thanks Bye
View 4 Replies View RelatedI have a database with a front end and back end (tables on the server) that was recently converted from Access 2003 to Access 2010.
For some reason the back end keeps hanging and I have to constantly compact and repair and there has been major data loss on a regular basis.
In Access2010 I have created a linked table to a SQLServerExpress database.I have a user in SQLserverExpress with only reading rights.This linked table is used in a form which only shows the information. When opening the form, it prompts for the SQLserverExpress username and password.How can I configure the linked table so that it logs in automatically with the SQL user I prefer so that the user does not need to enter a user / password?
View 3 Replies View RelatedI have a fe that has 5 tables linked to a backend db on the server.I want to add a new table to the fe that is linked to a second db on the server? What I have tried.I have created the tbl_called in the fe.when I right click on it and go to Linked Table Manager I do not see it on the list. The only tables in the list are the 5 I linked before. Why is tbl_called not showing up??
View 2 Replies View RelatedHi There
i am trying to link some more tables to my access front end from the sql server back end
when i select 'ODBC Databases' from the link pop up box, the pop up box just closes
any ideas why, or work arounds would be appreciated
Happy Christmas
Does anyone know how to link tables automatically/VBA?
I'm trying to import files from our DB2 database in which one file is created monthly and instead of manually importing / linking the files manually, I'm looking to have access link to the new file automatically.
The file names are structured as so..
ITM01 (Jan)
ITM02 (Feb)
ITM03 (March)
Thanks
Hi All
I enter data in a form "WIP" that is based on a table named "WIP" in the form I have a command button. When I activate the command button it takes me into another form "Materials" which is based on a table named "Materials".
The data that I enter into "Materials" is not linked to the data ie Customer details which I have entered into "WIP".
My aim is to be able to report the materials used.
I have tried variations of relationships but am obviously missing something.
Thanks in Advance
Geoffk
I have a database with software
ID: autonumber
Name: text
Version: text (some say Beta etc)
Possibly 200 pieces of software
I have a database of computers
ID: autonumber
RoomName: text
ComputerName: text
Description: text
I want to link them so a computer can have up to 200 pieces of software in it or just one piece.
I dont want a table with 200 boolean fields although thats how i will end up doing it if i cant any other way.
Chances are each computer will have about 20 - 30 bits of software installed and therefore the table shouldnt need to be huge.
Anyone have any ideas how i can link these and keep the second table small. Surely i can say Computer [2] has software installed [2, 4, 5, 28, 224] but i dont know how to.
Thanks
.matt
I have a spilt database and both ends sit on a server. The front end has a short cut on the desktop from five machines.
On one machine I can access the backend but it i try and relink the tables, the linked table manager is empty and i cannot and the "always prompt for new location" option is not available so i cannot even do it individually that way.
Any suggestions of why this would be? Is it a security user issue (though i haven't specifically set up any user or workgroup securities)
I have even tried holding down the Shift key and that doesn't work!!
Thanks