I am trying to create a training matrix in which i need a form that if I put or assign maximum of 20 attendees then 20 comboxes will appear in form.for example, i enter in textbox1 6 or 15 depends but max is 20 then if hit enter comboxes will appear but quantity will based on value that i enter in textbox1.
View RepliesI have a report that gets its data from a query. I need the query to run before the report based on criteria based from two combo boxes on a form.
View 3 Replies View RelatedHi,
I'm trying to get the maximum number in a table field to increase it by one depending on the member that is selected in a drop down in a field.
I have three tables: members, programs and times. Each member can have N programs and each program can be broadcast N times.
Each member has a three digit code, like XXX. Each program has the three digit code of the member + three numbers that are supposed to auto increment. That is, the first program of member X with the member code XXX is called XXX001.
What I'm trying to do is that when a new program is filled in and I select the member, then the program code should update automatically, adding one to the latest program by that member.
That is, if the last program by member X that was inserted in the database is XXX010, then if a new program is inserted it should automatically be XXX011, even though programs by other members have been added in between.
This is the code I use now, for the AfterUpdate when selecting the member in a dropdown in the form. But although I've played around a bit, I just get error messages...
Private Sub medlemsruta_AfterUpdate()
Dim medlemskod
medlemskod = Me![medlemsruta].Column(2)
Dim strMax As String
strMax = DMax("programs_kod", "table_programs", "Left$(programs_kod, 3) = medlemskod")
Me!program_kod = Left$(strMax, 3) & Format$(Val(Right$(strMax, 3)) + 1, "000")
End Sub
Medlemsruta is a dropdown where one selects the member from the members table, where the three digit code is in the third column (Column(2)).
I'm trying to use DMax to get the maximum number for the particular member and after that adding 1 to that for the new program code.
Grateful for any advice! Thanks!
I wish to produce a delivery note which needs to print an empty box for manually ticking.
I need a box for each item quantity i.e 5 items on the job print 5 boxes. 20 items print 20 boxes.
I have been able to use very crude code if there is only a few items, using if qty =1 then / 1/ else if qty = 2 then / 1/ / 2 / etc etc ...
That works and prints the / 1 / 2 / which is ok but there must be a simpler way as it the job has more that it would be much better and far more useful for other reports to print a box or item.
I am wondering if it is possible to calculate scores automatically based on the number of tick boxes the users have selected? If yes, how do I go about doing this feature?
View 5 Replies View RelatedI have a rather simple query that will produce filtered results based on the user's selection in 1 to 4 separate combo boxes on a form. But I can't get it to do what I want it to do. Here are my vitals:
Form = frmQryAdHoc
City combo box = cboCity (from tblWARNData)
County combo box = cboCounty (from tblCounties)
MWA combo box = cboWMA (from tblLookUpData)
Query = qryAdHoc (source = tblWARNData)
CoCity column criteria = [Forms]![frmQryAdHoc]![cboCity]
CoCounty column criteria = [Forms]![frmQryAdHoc]![cboCounty]
CoMWA column criteria = [Forms]![frmQryAdHoc]![cboMWA]
The query works fine if I make selections in all 3 combo boxes. However, if I make a selection in only cboCity, the query returns no results because it doesn't find a matching record where the city = cboCity and the County and MWA fields are blank.
Here's how I want it to work:
If cboCity = Detroit and cboCounty = Wayne, then
Results = 40 records (where city = Detroit AND county = Wayne)
But if cboCounty = Wayne and cboCity & cboMWA are blank, then
Results = 120 records (where county = Wayne; cities & MWAs = various)
IOW, I want the query to filter only on the cbo's where a selection has been made by the user and ignore any empty cbo's. What statement do I need to enter in each cbo-related criteria field so the query filters only on the combo boxes where a selection has been made by the user?
Any help you can provide will be greatly appreciated. Thank you.
:confused: I have a combo box on a form that is used for data entry that allows the user to pick the date. This is based on a table that includes date, week ending date and month, all very specific for our business. I used a function that says Me.txtBox=ComboBox.Column1 for example. So my combo box would include all the information, and all but the actual date is not visible. I want this to feed into another table that will be used for reporting, and that table has the same fields of date, week ending date and month. I keep getting an error saying that the value selected from the combo box doesn't fit the criteria, and I believe what is going on is that it is taking all the fields instead of just the date. Any suggestions how I can still have the text boxes update if I only have the date in the combo box?:confused:
View 1 Replies View RelatedHey guys, I'm not sure if this is possible, and it is the most challenging thing that I have tried to implement into my database to date.
What I have is a booking form which allows you to Add Bookings for camera kits.
When a customer comes in and would like to book a kit, the form must be filled in with the relevant details, I have 2 combo boxes on this form.
The first is the Kit selection, there are 5 camera kits.
The second is an option to book the full kit out, or just components.
So here's the tricky part...
When the first combo box selection is made (eg. Kit 3) I need the Kit3 table to be active.
Then, when the user selects "Components" from the second combo box, I need a form to open up based on both of the above.
So a form based on tblKit3 would be opened and the user can manually select the components that they require to be booked out.
Any help at all would be appreciated.
Here is an example of what I am trying to do:
I have a main form which has 4 combo boxes all based on tblPeople.
Combo0 is skill
Combo1 is discipline
Combo2 is crart
Comb03 is active
The sub form is a datatable list of the tblpeople.
How do I apply the filter to the datatable. I am assuming I need to build a sql statement somewhere like SELECT from tlpeople WHERE me!combo0 = [tblpeople].[skill] and me!Combo1=[tblpeople].[discipline] etc
Is there a sample database? or can somebody tell me how to go about this.
Thanks
Steve
My database is using data that is entered by the employees to generate Quotations. There is one important piece of information that will not be entered by the employee. The quotes involve metals which are priced based on market price and weight. I am planning on integrating a data feed with this information, but for now I want to enter it manually in a table. The price depends on two combo boxes one for "Precious or Base Metals", and one for "Metal Name". I want those two values to call the price from a table, and automatically fill in the "Market Price" field in the form.Also once that is in I would like to do my calculations. I am planning on using queries to do these. Is that the correct method?
View 6 Replies View RelatedI have a form that our operators use to do their hourly quality audits on. This is getting to be a huge burden on them because right now, they enter the date, the week ending date, the month every time they have to do an entry, and for me it is a nightmare because they can still enter the wrong information. So, what I was wondering is if there is a way that I can have them select the date from a combo box (easy enough), but from that, have the week ending date and the month fields automatically update as well. Any advice? I would really appreciate it! Thanks so much!!!!
View 3 Replies View RelatedI have a form called frmPO based on a table called tblPO One of the fields in tblPO is linked to the field idAddress in the table tblAddresses
The following fields exist in both tblAddresses and tblPO
Company
Address1
Address2
City
ZP
State
The form contains controls for these fields on tblPO. I would like to give the user the choice to either enter a shipping address manually, or selecting a preregistered address from tblAdresses. For this I would like a combo box showing the values of idAddress. I f a user selects a preregistered shipping address, I would like the form to fill the rest of the fields based on the value of this control.
My understanding is that I should set a BeforeUpdate event to set the values of the different controls, unfortunately my command of VBA amounts to 0.
I have two combo boxes in the form header and command buttons in the form detail. The combos allow the user to select either a customer or a prospect, then the command buttons open forms that only show records pertaining to the customer or prospect selected. Combos are "4Custcbo" and "4Proscbo".
1.How do I change which command buttons are available depending on whether the user has selected a customer or a prospect? Do I use two different subforms or is there a better way?
2.How do I hide the other combo box once the user has selected either a customer or a prospect?
I have a subform with the following fields:
Client name, Country, Country ID
I want to add to every row a combobox with a list of towns depending on the value in the field Country ID.how do I filter the comboboxes individually based on a value in another field on the same row?
I have a form and a subform with a master/child relationship set based on the primary key of each underlying table. All good there.Now, I want to use VBA to create a filter based on a set of inputs via combo boxes. But the filter must filter both the Parent and Child records.Example. "Show me only records where both only the Parent.Field1 = "string" and Child.Field = "string".I can do this in a QRY as follows:
SELECT Projects.[Project Number], Lessons.[Actions Resolved]
FROM Projects INNER JOIN Lessons ON Projects.ProjectsRecordID = Lessons.ProjectsRecordID
WHERE (((Projects.[Project Number])="AU-2102421") AND ((Lessons.[Actions Resolved])=True));
But, if I make this as a record source for the Parent Form, then the records in the Parent Form are repeated for each individual record in the Child form.
Ok so im working in MS Access 2007.
I want to create a query based on 3 combo boxes but have it so that if the field in the second or third combo box is not populated the query still runs.
Right now i have the Criteria set for the three columns that i wish to sort by as seen below.
Column 1
Criteria: [Forms]![Entity Selection Form]![areabox2]
Column 2
Criteria: [Forms]![Entity Selection Form]![devbox2]
Column 3
Criteria: [Forms]![Entity Selection Form]![entitybox2]
This gives me the correct query result but im forced to make a selection from each combo box. Is there a way to progamme it so that if I only make a selection from the first combobox and leave the others blank i can still get results in a query?
how to auto populate list box based on two dependent combo boxes.
View 9 Replies View RelatedI am trying to put together a form where employees will be entering maintenance information into my database. One of the requirements for this data is that when they perform repair work on an asset, they have to list a problem, cause and remedy. These are codes that are specific to each asset.
The closest thing I can think of to what I am trying to acheive is the selectors on car search websites. You select a MAKE, and then the MODEL list is narrowed down based on that, then you pick the TRIM, which is narrowed down based on the model selection. I have an Excel spreadsheet of the Assets(Failure Class), Problems, Causes, and Remedies...I'm just not sure how to put this into Access to get the desired output. I have attached a sample of the Excel spreadsheet for illustration.
I believe I'm going to have to put each of the columns in a seperate table and use relationships..but I'm not sure about that.
I'm trying to navigate to a record based on a series of combo boxes and a button. The user goes through the combo boxes, first picking a (let's say) Store, then Aisle, then Item. The Item combo box stores the Item's unique ID as its bound column.My code is as follows:
Code:
Private Sub NavigateButton_Click()
Me.Recordset.Clone.FindFirst "[ItemID] = " & Me![ItemComboBox]
Me.Bookmark = Me.Recordset.Clone.Bookmark '(<-- Don't actually have this in yet, but I will need it)
End Sub
The ItemID field in the ItemTable table is an Autonumber Long Integer. Why am I getting the error "Engine does not recognize 'ItemID' as a valid field name or expression"?There are no references within the form to the ItemID directly (no text boxes, hidden fields etc).
Hi,
we use access for localisation in our application. The business object which accessess the access uses DAO connectivity and we often land to
"Too many client tasks" problem.
is it wise to change the DAO to ADO? if so the above problem will go off?
what are the chances that the problem still persists?
is that access has any limits on the number of connections? like 64, 255? or is that ADO/DAO has any limitaions on the number of concurrent connections to access DB?
Pls help, your help will be highly appreciated.
Thanks,
Venkat.
hi all,
This is general question only. How many number of records that Access can handle as a maximum records?
Or it only depend on size limit (4GB)???
thanks
My issue:
Does anyone know the maximum number of (one to one) relationships with cascading deletes a table can have?
Background:
I have a split database peer-to-peer application with ten simultaneous users, 250+ linked tables running on A2K, AXP and A03. MSDE and SQL Server are presently not viable options.
I'm unable to manually or programmatically relate one table to 73 others with referential cascade deletes; some of the 73 are related to still other tables. The one table is used as a recordsource on a subform on each of 73 different main forms, each of the latter having a different recordsource.
In other words, I want to delete a record in any of 73 different main forms, each with a unique table recordsource, and then cascade delete a subform record (which has the same table recordsource, regardless of the main form).
If I combined the 73 into a single table, I'd have a monster record with 500+ fields, assuming the latter is even possible, and in which event perfomance would suffer from excessive network traffic.
What I've tried:
I haven't worked this issue for some time and have forgotten the number of relationships for a single table I've been able to create. As I recall, it's on the order of 20 relationships maximum for one table.
Of course, I can do it programmatically delete the subform record on the OnDelete event of the main form, but, for elegance, I'd like to use a cascade delete.
Peer-to-peer network performance is not presently a problem.
I have created a db for my warehouse, now what I want is to set a maximum no of items to be issued to one person = 20 (means 20 rows only) in a subform. If the number exceeds it prompt user that you reached to the maximum no of issues.
View 2 Replies View Relatedim trying to enable/disable checkboxes based on a combobox selection for instance,
i make the selection in a combo box called terms and conditions. i want it then to only enable the business,domestic and summary check boxes for that type, with the onther check boxes staying disabled. is there a way this can be done through code like the statement "only enable if this letter type selection has been selected"
I have run into a problem with an ODBC table connection. The table I am connected to exceeds the number of fields allowed in an Access table. I am using Access 2003. When I looked on Microsoft help site I think the max number of fields in a recordset is 242 so I am unable to see all of the fields in the original table I am linking to. Does anyone know if this limitation has changed in the newest version of Access? I checked the Filemaker www site and that program does not have the same limitations. Thanks in advance for any help!
View 4 Replies View RelatedHello there.
Is it better to have many fields in one table or to split the data between a number of tables and link them?
Thanks.
# gingette