I want to write a Stored Procedure which can search based on multiple condition and in default is select all.
Example :
User Name [ ALL ] Textbox
Project Name [ ALL ^] dropdown
ID [ ALL ^] dropdown
-----------------------------
Display On Gridview(Default display all records)
select one condition search one and so on.
My stored procedure was running sqlserver 2012 but can't return output parameter value here i paste my SP ...
alter Procedure BD_InsertMobileClient_GpsLogPlanogram
(
@SalesPersonID int,
@MobileRowID int,
@StatusCode int output
)
[Code] .....
I want to create a CLR Stored Procedure with a Table User Defined Type like this short example in SQL:
CREATE TYPE [dbo].[TypeTable] AS TABLE
(
[Id] [integer] NOT NULL,
[Value] [sysname] NOT NULL,
PRIMARY KEY CLUSTERED
[Code] ....
I found some example in this link : CLR UDT
But I can't figure how to do the same with a User Defined Type Table.
i am trying to use INSERT statement based on some condition not WHERE but using IF condition on the database. something like
INSERT INTO table1 if id = @id or order = @fdfdfd.
i think it will return no of rows affected with insert statement. am i right?
any help will be appreciated.
Hi,
I'm trying to write a nested stored procedure, with the outer proc named "spAssociate", and inner proc named "spSales".
So far I have created the inner proc
CREATE PROCEDURE spSales@userID intASSET NOCOUNT ON
SELECT SalesOppID
FROM Sales_Opportunities
WHERE SalesOppCurrentStatus NOT IN ('Sale Lost','Sales Closed','Sale Closed','Unqualified','Deferred','Dropped')
AND OppOwnerUserID = @userIDGO
This was successfully created. I wanted to use the return set in the outer proc, which I tried creating as:
CREATE PROCEDURE spAssociate(@userID int,
@containerType varchar(100),
@associateType varchar(100))AS SET NOCOUNT ON
SELECT AssociateID
FROM AppRelations
WHERE ContainerType=@containerType
AND ContainerID IN (EXECUTE spSales @userID)
AND AssociateType=@associateType GO
I get an error "incorrect syntax near execute".
How can I use the results from the inner proc for the WHERE condition in my outer proc?
Any help is greatly appreciated. Thanks!
I've a report whose columns are returned from a stored procedure. Now I want to display the report based on a date range. The date field is Received. It's in dbo.master. I added 2 parameters start date and end date. When I check the condition if dbo.master.Received>StartDate and dbo.master.Received < EndDate directly I'm getting error. Could someone tell me what mistake I'm doing? Thanks for your help!ALTER Procedure [dbo].[USP_Reports_NewTier1]
@ClientCode VARCHAR(7) = '',@UserID INT = 0
,@OrderID INT =0
,@StartDate datetime,@EndDate datetime
IF @ClientCode <> '' and dbo.master.Received > StartDate and dbo.master.Received<EndDateBEGIN SELECT --Root Select --ClientName @ClientName = (Select Name FROM dbo.customer c WHERE c.Customer = @ClientCode) ,@TotalDollarValue = (SELECT SUM(m.current1-m.paid1) FROM dbo.master m WHERE phase=1 AND m.Customer = @ClientCode AND M.Status <> 'PIE')
,@AverageAge = ISNULL((select avg(age) from (select datediff(day,Received,CASE WHEN clidlp>clidlc then clidlp else clidlc END)* -1 as age from dbo. master M WHERE phase=1 AND customer = @ClientCode AND M.Status <> 'PIE') x),0)END
hi i want to know how to write stored procedure ..then i have to include (IF condition ) with SP ..
let me this post ..................anybody ??????????
Hello
I wonder if someone could suggest a way to obtain the following. Using SQL Server 2005 I want to create some stored procedures. I want to query the DB with various filter arguments and combinations of these. One way would be to create one stored procedure for each function signature. However, as the number of combinations of filter is large, if possible I'd rather have a generic input to the each stored procedure that corresponds to the entire WHERE clause' search condition.
The stereotype behavior I'm looking for is:
SELECT myField
FROM myTable
WHERE @mySearchCondition
Does any one have some good suggestion, code samples and/or links?
Kind regards
Jens Ivar
I admit I am a novice to queries and stored procedures but understand stored procedures are more secure, so I am choosing to challenge myself with a stored procedure and have not been successful at all.
What I am looking for is a stored procedure which would query the single table named Hospital, which would search from a single textbox the end user would enter the text they are searching for on a Windows VB application but is dependant on a few end user selected items.
1. The end user can select a radio button either "Starts with" or "Contains"
2. The end user can select from 6 checkboxes (Hospitals, Address, City, State, Zip, Type) to limit or expand their search from the columns in the table.
The table has 17columns (CO, PARENTCO, ADDR, POBox, CITY, State, ZIP, TEL, FAX, WEBSITE, HOSP_TYPE, OWNERSHIP, BEDS, CONTACT, TITLE, Email) but I am only allowing the end user to search by the above 6 columns and need to display the above 6 columns plus the phone, fax and website columns.
After the user clicks the search button it displays the results in a listbox and the user will then select the one they want and it displays the information in another set of textboxes.
Hopefully someone can get me pointed in the right direction! Thanks for your help!
I have a stored procedure with several insert into statements. On occasion one of the insert into queries doesn't return any data. What is the best way to test for no records then, skip that query?
View 5 Replies View RelatedHello
I am building a survey application.
I have 8 questions.
Textbox - Call reference
Dropdownmenu - choose Support method
Radio button lists - Customer satisfaction questions 1-5
Multiline textbox - other comments.
I want to insert textbox, dropdown menu into a db table, then insert each question score into a score column with each question having an ID.
I envisage to do this I will need an insert query for the textbox and dropdownlist and then an insert for each question based on ID and score.
Please help me!
Thanks
Andrew
I need to update multiple columns in a table with multiple condition.
For example, this is my Query
update Table1
set weight= d.weight,
stateweight=d.stateweight,
overallweight=d.overallweight
from
(select * from table2)d
where table1.state=d.state and
table1.month=d.month and
table1.year=d.year
If table matches all the three column (State,month,year), it should update only weight column and if it matches(state ,year) it should update only the stateweight column and if it matches(year) it should update only the overallweight column
I can't write an update query for each condition separately because its a huge select
Ok, so i have this program, and at the moment, it generates an sql statement based on an array of db fields, and an array of values...
my question is this, is there any way to create a stored procedure that has multiple dynamic colums, where the amount of colums could change based on how many are in the array, and therefore passed by parameters...
if this is possible, is it then better the pass both columns and values as parameters, (some have over 50 columns)...or just create a seperate stored procedure for each scenario?? i have no worked out how many this could be, but there is 6 different arrays of colums, 3 possible methods (update, insert and select), and 2 options for each of those 24...so possibly upto 48 stored procs...
this post has just realised how deep in im getting. i might just leave it as it is, and have it done in my application...
but my original question stands, is there any way to add a dynamic colums to a stored proc, but there could be a different number of colums to update or insert into, depending on an array??
Cheers,
Justin
I'm having an Employee table with a Salary field. How can we increate thesalary of the employees with following conditions:1) salary between 1000 and 10000 : increase 25%2) salary between 10000 and 20000 : increase 15%3) salary between 20000 and 30000 : increase 5%Surely you can create a cursor to solve this. But the question is, Is itpossible to solve this in a single query, if no what is most optimizedway?
View 4 Replies View RelatedOk, this is kind of an odd problem. Back in June we were having problems with our call manager software, and they decided to have it just start usinga new database. Now I'm trying to generate some reports which need to cover both the old call stats and the new, so that means the stored procedure builds a temp table and populates it from both databases.This works perfectly fine in Management Studio, and when being called from Excel.However when I try to call it from an ASP.NET web app using SqlCommand.ExecuteReader(), I only get results from the new database!What on earth could cause that?
View 2 Replies View RelatedI have put together the stored-procedure below to carry out update, delete and insert queries in one visit. The code has been pieced together from the pages listed at the bottom. I pass the procedure three XML strings and after testing it a few times it seems to work fine. I’m fairly new to stored procedures though, so I was hoping someone would answer these questions:
1. Is this an acceptable way to do this? Can you foresee any problems?2. I want to make this an ‘all-or-nothing’ event, i.e. if any part of the procedure fails, it must all fail. How would I achieve that?3. I want to know in my calling code what the result is. I’ve used output parameters before, but I’m unsure how to combine one with 2 above.
Sorry this is a long script, but I’ve removed most of the column names and values to shorten it. Thanks in advance.CREATE PROCEDURE amendPageRecords
@PagesToUpdate xml,
@PagesToDelete xml,
@PagesToInsert xml
AS
BEGIN
-- UPDATING RECORDS ------------------------------------------------------------
DECLARE @UpdateTable TABLE (PageID int, PageType varchar(10))
INSERT INTO @UpdateTable (PageID, PageType)
SELECT PageID = UpdatePages.Item.value('@PageID', 'int'),
PageType = UpdatePages.Item.value('@PageType', 'varchar(10)')
FROM @PagesToUpdate.nodes('Pages/Page') AS UpdatePages(Item)
UPDATE page
SET page.page_type = UP.PageType
FROM page INNER JOIN @UpdateTable UP ON page.page_id = UP.PageID
-- DELETING RECORDS ------------------------------------------------------------
DECLARE @DeleteTable TABLE (PageID int)
INSERT INTO @DeleteTable (PageID)
SELECT PageID = DeletePages.Item.value('@PageID', 'int')
FROM @PagesToDelete.nodes('Pages/Page') AS DeletePages(Item)
DELETE FROM page
FROM page INNER JOIN @DeleteTable DP ON page.page_id = DP.PageID
-- INSERTING RECORDS -----------------------------------------------------------
DECLARE @InsertTable TABLE (SiteID int, PageType varchar(10))
INSERT INTO @InsertTable (SiteID, PageType)
SELECT SiteID = InsertPages.Item.value('@SiteID', 'int'),
PageType = InsertPages.Item.value('@PageType', 'varchar(10)')
FROM @PagesToInsert.nodes('Pages/Page') AS InsertPages(Item)
INSERT INTO page
SELECT SiteID, PageType
FROM @InsertTable
END
GOCode taken from:http://weblogs.asp.net/jgalloway/archive/2007/02/16/passing-lists-to-sql-server-2005-with-xml-parameters.aspxhttp://www.eggheadcafe.com/articles/20030627c.asphttp://www.sommarskog.se/arrays-in-sql-2005.html
I need help in figuring out the proper way of writing a stored procedure out correctly to get my desired datasource. In my ocnIdToRatePlanOptions table, I will recieve a parameter via request.querystring @ocnId to filter out my result set for ocnIdToRatePlan table. Based on the ocnId filtered I want it to select the corresponding tables too.So, if a querystring is passed that is 3955 in my ocnIdToRatePlanOptions table, I want it to use it to create a select for RatePlan1. If a querystring is passed that is 1854 in my ocnIdToRatePlanOptions table, I want it to use to create a select for RatePlan2. Is this possible? ocnIdToRatePlanOptions Table [otrpoRefId] [int] IDENTITY(1,1) NOT NULL,[FKocnId] [nvarchar](4) NOT NULL,[FKrpoRefId] [int] NOT NULL,1, 3955, 12, 1854, 2RatePlan1 Table[rp1RefId] [int] IDENTITY(1,1) NOT NULL,[FKocnId] [nvarchar](4) NOT NULL[fee] [decimal](18, 2) NOT NULL1, 3955, 1.002, 2350, 2.00RatePla2 Table[rp2RefId] [int] IDENTITY(1,1) NOT NULL,[FKocnId] [nvarchar](4) NOT NULL,[q_0_50] [numeric](18, 2) NOT NULL CONSTRAINT [DF_ratePlan2_q_0_50] DEFAULT ((225)),[q_51_100] [numeric](18, 2) NOT NULL CONSTRAINT [DF_ratePlan2_q_51_100] DEFAULT ((325)),[q_101_150] [numeric](18, 2) NOT NULL CONSTRAINT [DF_ratePlan2_q_101_150] DEFAULT ((345)),[q_151_200] [numeric](18, 2) NOT NULL CONSTRAINT [DF_ratePlan2_q_151_200] DEFAULT ((400)),[q_201_250] [numeric](18, 2) NOT NULL CONSTRAINT [DF_ratePlan2_q_201_250] DEFAULT ((450)),[q_251_300] [numeric](18, 2) NOT NULL CONSTRAINT [DF_ratePlan2_q_251_300] DEFAULT ((500)),[q_301_400] [numeric](18, 2) NOT NULL CONSTRAINT [DF_ratePlan2_q_300_400] DEFAULT ((650)),[q_401_600] [numeric](18, 2) NOT NULL CONSTRAINT [DF_ratePlan2_q_401_600] DEFAULT ((950)),[q_601] [numeric](18, 2) NOT NULL CONSTRAINT [DF_ratePlan2_q_601] DEFAULT ((1.50)) 1,1854, 225.00, 325.00, 345.00, 400.00, 450.00, 500.00, 650.00, 950.00, 1.502,8140, 225.00, 325.00, 345.00, 400.00, 450.00, 500.00, 650.00, 950.00, 1.50
View 12 Replies View RelatedI am trying to write a stored procedure that has an inner join between two tables from two different databases on the same sql server.
Something like...
Select * FROM
DB1-table1 INNER JOIN DB2-table1
ON DB1-table1.ID = DB2-table1.ID
yada yada yada.......
Does anyone know how to do this or is it possible? If so, what database should I put the stored procedure in or does it matter?
Hello.
I'm trying to write a generic Stored Procedure will select records with the following options.
1. Select XXX from theTable
Where ID = 1
2. Select XXX from theTable
Where ID = 1 or ID = 3 or ID = 4
The issues is that at run time the WHERE CLAUSE COULD CHANGE
(it could have multiple OR-d options)
Is there a way to pass a varChar argument like "Where ID=1 or ID =2"?
Thanks in advance!
-andy
Hi All,
I have a database with very heavy volume of data.
I need to write a stored procedure with 20 parameters as input and it searches in a table . Most of the parameters or NULL , how do I write this procedure without using any dynamic queries.
Ex : To find a customer I have a proc which can accept 20 parameters like CustName, City, State , Phone , Street etc.
Im passing only Custname as parameters and other 19 parameters are NULL.How do I write the WHERE clause ?
Thanks in advance,
HHA
Hi,
I'm trying to move an asp site from an Access DB to SQL Server.
The site features a search system which allows multiple keywords to be used in up to three fields.
The way I used to manage this was very similar to how it is described below (taken from http://www.planet-source-code.com/vb/scripts/ShowCode.asp?lngWId=4&txtCodeId=6701):
"So you're replacing all of the middle spaces with a SQL 'and' statement. In plain English, if your search phrase is "print bug", this now becomes "'%print%' AND field LIKE '%bug%'" when you concatenate the leading and trailing %'s and quotes (this is for Microsoft Access drivers, other drivers may use different wildcards)--so just append this phrase to the "WHERE field LIKE " phrase, and you're in business."
The trouble I'm having is that the search string is sitting in a Stored Procedure. How can I dynamically append to the search string in this case?
If it isn't possible, how can I go about this?
Cheers all.
__________________________________________________ ___
Code:
ASP:
item=request(item)
'****item = Replace(item, " ","%' AND item like '%")**** - needs attention
rs.Open "Exec getlist "& item &"" objConn, 3
SP:
CREATE PROCEDURE getlist
@item nvarchar(255)
SELECT item FROM publications WHERE item LIKE '%' + @item + '%'
GO
I believe we can you multiple statements in stored procedures?
Suppose I have a stored procedure and I pass parameters to this SP.
What I am aiming for is to pass some values to the stored procedure, use a select statement to retrieve some values, then have two update statements as below. Updating the same table but with opposite values, both passed as a parameter and retrived, as given below:
CREATE sp_temp_proc
@order_id int,
@order_position int,
@temp_order_id OUTPUT
@temp_order_position OUTPUT,
SELECT order_id AS temp_order_id
FROM <TABLE> WHERE order_position < @order_position
@temp_order_id = temp_order_id
UPDATE <TABLE> SET order_position = @order_position WHERE order_id =
@temp_order_id
UPDATE <TABLE> SET order_position = @temp_order_position WHERE order_id = @order_id
I want to use 3 transactions in a single stored procedure.First it should update the value and then if the 1st transaction executed successfully then 2nd transaction should start,if 2nd trans executed successfully then 3rd trans should execute.After that only i want to commit all the transactions that is 1,2,3.If any of the trans fails the other shouldn't execute.How do i do this?
USE [recruit]
GO
/****** Object: StoredProcedure [dbo].[Import] Script Date: 10/15/2014 17:13:11 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER Proc [dbo].[Import]
@CustId int
[code].....
how can we use 2 databases in 1 stored procedure.
like for example i want to get records from 1 table and insert it to other tables in another database.
thnx for the help.
Hello all,
I'm working on a project for fun with some friends and have run into an issue with stored procedures. I've dealt with SQL quite a bit at my current job, but always from the perspective of somebody querying the database. The database was always managed by someone else and I never had to worry about the underlying code. Now, with my own project at home, I'm trying to deal with a situation and would like to use one, but I'm not sure if it is the best option and if so, exactly how to go about it.
Imagine a site that tracks movies. I have 3 tables:
Movies ( MovieID, Title, DirectorID, ActorID )
Actors ( ActorID, Name )
Director (DirectorID, Name)
This is an overly simple example, but it gets to the heart of my problem.
Okay, now what I'm wanting to do is to be able to write a procedure that would let me create my entries from just one call -- for instance
create_movie( 'Super Movie', 'directorJoe', 'actorJohn' )
that would do the following things:
-Look and see if the given director and actor already exist (from previous films)
-If they do, grab their ID values and use those in the new movie entry
-If they do not, create new entries and get THOSE ID values to use in the new movie entry
Can this be done in a stored procedure (I'm pretty sure it can be) and what sort of commands should I look into -- I'm not looking for a complete solution, cause I want to learn, but I am having trouble finding examples that fit my scenario.
Thanks.
Hi!I got 2 stored procedure, proc1 executes proc2,proc2 does some updates and inserts on different tables ...proc1:ALTER PROCEDUREASexecute proc2SELECT * FROM tblFoo______________________my problem is, that when executing proc1, I receive the message:"THE SP executed successfully, but did not return records!"But I need the resultset from "SELECT * FROM tblFoo" that is executedat the end of proc1.I'm not sure, but I think that I solved a similira problem with "setnocount on", I put it into both SP, but it's still the same ... noresultset ...How can I display "SELECT * FROM tblFoo" within a SP, where SQLstatements are executed before?!Thank you!
View 1 Replies View RelatedJust wondering if this is good form:Alter Procedure "mySPName"@UniqueID intASset nocount onset xact_abort offDELETE FROM tblNameOneWHERE(tblNameOne.UniqueID = @UniqueID)DELETE FROM tblNameTwoWHERE(tblNameTwo.UniqueID = @UniqueID)Is it a good idea to run multiple detele statements within one SP?thanks,lq
View 5 Replies View RelatedHere's what I'm trying to accomplish:
View 5 Replies View RelatedIf I have multiple selects statements in one stored procedure. How do I access the different results in a report in Reporting Services? Where the first select is the detail lines of my report and the second select is just a field for a my header? Or am I going about this wrong with putting it all the results I want into one stored procedure for one report?
Example stored procedure:
ALTER PROCEDURE [dbo].[proc_DepositsByOfficer]
As
SELECT MASTER_DSC.APP
, MASTER_DSC.BRANCH
, qlkpOfficer.strName
, MASTER_DSC.DSC_OFFICER_49
, qlkpBranchName.strDescrS
, MASTER_DSC.DSC_CUR_BAL_21
, Case MASTER_DSC.APP WHEN 1 Then DSC_CUR_BAL_21 End AS DDA_BAL
, Case MASTER_DSC.APP WHEN 2 Then DSC_CUR_BAL_21 End AS SAV_BAL
, Case MASTER_DSC.APP WHEN 3 Then DSC_CUR_BAL_21 End AS CD_BAL
, MASTER_DSC.DSC_INT_RATE_45
, Case When [DSC_CUR_BAL_21]>0 Then ([DSC_CUR_BAL_21]*[DSC_INT_RATE_45])/100 Else 0 End As ANN_EXP
, Case When [DSC_CUR_BAL_21]>0 And MASTER_DSC.APP=1 Then ([DSC_CUR_BAL_21]*[DSC_INT_RATE_45])/100 Else 0 End AS ANN_EXP_DDA
, Case When [DSC_CUR_BAL_21]>0 And MASTER_DSC.APP=2 Then ([DSC_CUR_BAL_21]*[DSC_INT_RATE_45])/100 Else 0 End AS ANN_EXP_SAV
, Case When [DSC_CUR_BAL_21]>0 And MASTER_DSC.APP=3 Then ([DSC_CUR_BAL_21]*[DSC_INT_RATE_45])/100 Else 0 End AS ANN_EXP_CD
, Case MASTER_DSC.APP WHEN 1 Then 1 End AS DDA_Count
, Case MASTER_DSC.APP WHEN 2 Then 1 End AS SAV_Count
, Case MASTER_DSC.APP WHEN 3 Then 1 End AS CD_Count
, qlkpApplicationCode.strDescrS AS strApplCode
FROM
MASTER_DSC
INNER JOIN qlkpApplicationCode ON MASTER_DSC.APP=qlkpApplicationCode.dblReference
LEFT JOIN qlkpOfficer ON MASTER_DSC.DSC_OFFICER_49=qlkpOfficer.intID
LEFT JOIN qlkpBranchName ON MASTER_DSC.BRANCH=qlkpBranchName.dblReference
WHERE
MASTER_DSC.DSC_CUR_BAL_21<>0
ORDER BY
MASTER_DSC.BRANCH;
SELECT dbo.fBankName() AS BankName;
Hi all:I am trying to create a website which will search and return results that are from multiple tables in different databases. I have the code to search a singular database right now, and I tried to make a connection to a second one, which worked, but I don't know how to send the proper sql commands to the second database or how to link them in the code. Does anyone have any pointers on creating a site which will search different tables in different databases with a known connection between databases? Any help would be really really really really appreciated.-Shrey
View 3 Replies View Relatedim in need of some help, im new at sql and am trying to seach multiple tables.
i am doing a football database with a table for each of the teams
and each table has the following
"First Name" "Last Name" "Age" "Date of Birth" etc
what i am trying to do is search for either the "first name" or "last name" in every table
if anyone can help me it would be apreciated
i have multiple tables that vary very little in name. what i mean by this is they are named tbleffort1, tbleffort2 etc. i need to search all the tables together. there is a large constantly changing number of tables, so i would prefer not to have to write them out one by one! any suggestions would be most appreciated!
View 4 Replies View Related