Hello,
I have such a problem. Need to add additional column to my query. The column should consist of set of fixed number (same as number of query rows) values (text). At start thought it's simple but now Im lost. Is there any chance to do it. Apreciate any help. I need to tell that I have only access to select on this database so no use of operation on tables.
Hello All,Is there a way to run sql select statements with column numbers inplace of column names in SQLServer.Current SQL ==> select AddressId,Name,City from AddressIs this possible ==> select 1,2,5 from AddressThanks in Advance,-Sandeep
View 1 Replies View RelatedHi,I have boolean values in a table for ex. Federation. And I want toselect followingSelect 'Insert into' + member + 'test' as test1from federationThen I get error messageServer: Msg 403, Level 16, State 1, Line 1Invalid operator for data type. Operator equals add, type equals bit.Someone can help me out of it.Thanks an advance- Loi -
View 3 Replies View RelatedI have an SQL Select statement that I need to add a column to called SalePrice, the SalePrice column needs to be calculated by adding together the values of 12 columns, then multiplying that value by the value in a another column to calculate margin. My issue is that I can only get it to add 7 column values together, if I add any more columns to the equation it just returns and null result. My DB is SQL 2005 Express SP2. My select statement is below: SELECT dbo.MFG_DATA_Machines.ID, dbo.MFG_DATA_Machines.MachineName, dbo.MFG_DATA_Parts_CPU.PartDescription AS CPU,
dbo.MFG_DATA_Parts_CPU.PartCost AS CPUCost, dbo.MFG_DATA_Parts_Motherboard.PartDescription AS Motherboard,
dbo.MFG_DATA_Parts_Motherboard.PartCost AS MotherboardCost, dbo.MFG_DATA_Parts_RAM.PartDescription AS RAM,
dbo.MFG_DATA_Parts_RAM.PartCost AS RAMCost, dbo.MFG_DATA_Parts_HDD.PartDescription AS HDD,
dbo.MFG_DATA_Parts_HDD.PartCost AS HDDCost, dbo.MFG_DATA_Parts_OpticalDrive.PartDescription AS OpticalDrive,
dbo.MFG_DATA_Parts_OpticalDrive.PartCost AS OpticalDriveCost, dbo.MFG_DATA_Parts_Video.PartDescription AS Video,
dbo.MFG_DATA_Parts_Video.PartCost AS VideoCost, dbo.MFG_DATA_Parts_OS.PartDescription AS OS, dbo.MFG_DATA_Parts_OS.PartCost AS OSCost,
dbo.MFG_DATA_Parts_Modem.PartDescription AS Modem, dbo.MFG_DATA_Parts_Modem.PartCost AS ModemCost,
dbo.MFG_DATA_Parts_FloppyDrive.PartDescription AS FloppyDrive, dbo.MFG_DATA_Parts_FloppyDrive.PartCost AS FloppyDriveCost,
dbo.MFG_DATA_Parts_CardReader.PartDescription AS CardReader, dbo.MFG_DATA_Parts_CardReader.PartCost AS CardReaderCost,
dbo.MFG_DATA_Parts_PowerSupply.PartDescription AS PowerSupply, dbo.MFG_DATA_Parts_PowerSupply.PartCost AS PowerSupplyCost,
dbo.MFG_DATA_Parts_CaseType.PartDescription AS CaseType, dbo.MFG_DATA_Parts_CaseType.PartCost AS CaseTypeCost,
dbo.MFG_DATA_Machines.Notes, dbo.MFG_DATA_Machines.MarginPercent, dbo.MFG_DATA_Machines.PriceOverride,
(dbo.MFG_DATA_Parts_CPU.PartCost + dbo.MFG_DATA_Parts_Motherboard.PartCost + dbo.MFG_DATA_Parts_RAM.PartCost + dbo.MFG_DATA_Parts_HDD.PartCost
+ dbo.MFG_DATA_Parts_OpticalDrive.PartCost + dbo.MFG_DATA_Parts_Video.PartCost + dbo.MFG_DATA_Parts_OS.PartCost + dbo.MFG_DATA_Parts_Modem.PartCost
+ dbo.MFG_DATA_Parts_FloppyDrive.PartCost + dbo.MFG_DATA_Parts_CardReader.PartCost + dbo.MFG_DATA_Parts_PowerSupply.PartCost + dbo.MFG_DATA_Parts_CaseType.PartCost)
* ((dbo.MFG_DATA_Machines.MarginPercent + 100) / 100) AS SalePrice
FROM dbo.MFG_DATA_Machines LEFT OUTER JOIN
dbo.MFG_DATA_Parts_CaseType ON dbo.MFG_DATA_Machines.CaseType = dbo.MFG_DATA_Parts_CaseType.ID LEFT OUTER JOIN
dbo.MFG_DATA_Parts_Motherboard ON dbo.MFG_DATA_Machines.Motherboard = dbo.MFG_DATA_Parts_Motherboard.ID LEFT OUTER JOIN
dbo.MFG_DATA_Parts_Video ON dbo.MFG_DATA_Machines.Video = dbo.MFG_DATA_Parts_Video.ID LEFT OUTER JOIN
dbo.MFG_DATA_Parts_RAM ON dbo.MFG_DATA_Machines.RAM = dbo.MFG_DATA_Parts_RAM.ID LEFT OUTER JOIN
dbo.MFG_DATA_Parts_PowerSupply ON dbo.MFG_DATA_Machines.PowerSupply = dbo.MFG_DATA_Parts_PowerSupply.ID LEFT OUTER JOIN
dbo.MFG_DATA_Parts_OS ON dbo.MFG_DATA_Machines.OS = dbo.MFG_DATA_Parts_OS.ID LEFT OUTER JOIN
dbo.MFG_DATA_Parts_OpticalDrive ON dbo.MFG_DATA_Machines.OpticalDrive = dbo.MFG_DATA_Parts_OpticalDrive.ID LEFT OUTER JOIN
dbo.MFG_DATA_Parts_Modem ON dbo.MFG_DATA_Machines.Modem = dbo.MFG_DATA_Parts_Modem.ID LEFT OUTER JOIN
dbo.MFG_DATA_Parts_HDD ON dbo.MFG_DATA_Machines.HardDisk = dbo.MFG_DATA_Parts_HDD.ID LEFT OUTER JOIN
dbo.MFG_DATA_Parts_FloppyDrive ON dbo.MFG_DATA_Machines.FloppyDrive = dbo.MFG_DATA_Parts_FloppyDrive.ID LEFT OUTER JOIN
dbo.MFG_DATA_Parts_CPU ON dbo.MFG_DATA_Machines.CPU = dbo.MFG_DATA_Parts_CPU.ID LEFT OUTER JOIN
dbo.MFG_DATA_Parts_CardReader ON dbo.MFG_DATA_Machines.CardReader = dbo.MFG_DATA_Parts_CardReader.ID
I'm puzzled as to how to express what I want in a stored procedure. Assume two columns, Surname and GivenName. The surname might be missing. When I originally wrote this app in Access, I used the following expression:
SELECT Iif( IsNull(Surname), GivenName, Surname + ", " + GivenName ) AS Agent
FROM Agents;
I've looked at the syntax for CASE but I can't figure out exactly how to say what I intend, particularly the AS Agent column aliasing.
Any help greatly appreciated. Please cc me privately so I receive your assistance at once!
TIA,
Arthur
A table has a column of int type. I need to select a fixed number of rows for each value. For example, if data in that column (c) are 5, 6, 7, and the number I want to select is 2, then I need 2 rows from c=5, 2 from c=6, and 2 from c=7. How to write that query? Any idea?
Thanks.
I have a sql line that selects records:
select * from prodstatistics order by shift_started desc
I do not need to read the entire table and want to limit the read to the first 500 records. How would I embedd that in my current statement?
Thank you.
I am writing a query and have the bulk of it already written.
I am looking at a table that contains customer orders. There is a column named Customer_Order.Status Available values for this column is R, F, H, and C.
I'd like for my query to return all lines that have the value R, F, H.
My where clause is written like this
WHERE CUSTOMER_ORDER.SITE_ID = 'XXX' AND CUSTOMER_ORDER.STATUS = ('R','H','F')
I know I'm missing something....
What is the best way to export fixed length data to text file in SSIS?
View 12 Replies View RelatedI want to add $ symbol to column values and convert the column values to western number system
Column values
Dollar
4255
25454
467834
Expected Output:
$ 4,255
$ 25,454
$ 467,834
My Query:
select ID, MAX(Date) Date, SUM(Cost) Dollars, MAX(Funded) Funding from Application
COST is the int datatype and needs to be changed.
Hi,
I would like to read from a Text File using SSIS Integration Package.
The file has a fixed number of columns, let's say 3 columns.
There is no row header and each columns length is fixed. There is no delimiter as well.
Here is the sample of the file contents:
John Doe USA
Mary Monroe UK
Andy Archibald Singapore
Here is the hints to read the file contents
123456789
0123456789
0123456789
==============================
John Doe USA
Mary Monroe UK
Andy Archibald Singapore
If you notice, from the 1st column until the 9th column, it's reserved for the first name.
The 10-th column until the 19th column, it's reserved for the last name. Finally the 20-th column until the 29th column is reserved for the Origin Country.
Since there's no delimiter inside the flat file contents, i have difficulty in parsing this text using SSIS Package.
Please let me know if you need any necessary information.
Thanks for all your help.
Regards,
Hadi Teo.
Ok I have a query "SELECT ColumnNames FROM tbl1" let's say the values returned are "age,sex,race".
Now I want to be able to create an "update" statement like "UPATE tbl2 SET Col2 = age + sex + race" dynamically and execute this UPDATE statement. So, if the next select statement returns "age, sex, race, gender" then the script should create "UPDATE tbl2 SET Col2 = age + sex + race + gender" and execute it.
Hi
I'm trying to convert and format integer values in a SQL Server select statement to a string representation of the number formated with ,'s (1000000 becomes 1,000,000 for example).
I've been looking at CAST and CONVERT and think the answers there somewhere. I just don'tseem to be able to work it out.
Anyone out there able to help me please?
Thanks,Keith.
Here is the example
state
-----
NY
NJ
CA
NY
NC
NJ
CA
IL
CA
Can we generate a result like this with select statement
state No
----- ---
CA 1
CA 2
CA 3
NJ 1
NJ 2
NY 1
NY 2
IL 1
NC 1
Can anyone just point me in the right direction. All I want to do is add some T-SQL to an existing stored procedure to return the number of rows selected into a return value.Does anyone know how to do this?
View 4 Replies View RelatedHi,
I have a table employee with 4 columns,
empno fname lname deptno
1 abc def 10
2 fff hhh 20
3 abc def NULL
4 abc def NULL
5 abc def 50
suppose i want to know the total number of null values in a particular column say deptno how shuld i write a query?
select count(deptno) from employee
where deptno IS NULL..
When i query this i get the result as 0..
Below is my sample data. I can't figure out how to select Unique phonenumber contacts for the same Ranked values from the set.
Basically the table is a mix of contactIDs. Some of them have duplicate phone numbers and through a separate mechanism we have ranked them.
It's easier then to pull out max(ranked) CLI_Numbers and their counterpart contactID(s). But I am also getting 2 or more records where the rank happens to be the same. I don't want that. Any one of the contactID will do for me.
The table has also same cliNumbers with different rank values, which are then correctly being picked up in the query below.
Note: ContactId is a unique value for each person in the table.
RecordID is simply RowID.
( I have attempted to populate a sample data suited for this forum - not sure how it comes out on the browser)
if object_id('tempdb..#MyData') is not null
drop table #MyData
create table #MyData
(
RecordID int,
contactID int,
forename varchar(25),
surname varchar(25),
[Code] ....
This is my query attempt
With RankedmobileDuplicateSet
as(
select cliNumber, max(ranked_value) as ranked_max_value
from #temp_UK_mobiledata
group by cliNumber)
[Code] .....
I have this update statement I am trying to use, to update a table. My problem is if there is no data in the select statement, it still adds number to the columns. How can I have this update statement work to put blank value in if there are no counts?
UPDATE T_AXA_BreakDown_Claims
SET [Claim Count Conm] = t2.[Claim Count Conm]
FROM T_AXA_BreakDown_Claims t1
INNER JOIN
(select
[code]....
In SQL 2005 I created table as
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[logMsg](
[logMsgID] [int] IDENTITY(1,1) NOT FOR REPLICATION NOT NULL,
[msg] [nvarchar](256) COLLATE Latin1_General_CI_AS NOT NULL,
[AppId] [int] NULL,
CONSTRAINT [PK_logMsg] PRIMARY KEY CLUSTERED
(
[logMsgID] ASC
)WITH (IGNORE_DUP_KEY = OFF) ON [PRIMARY]
) ON [PRIMARY]
and trying to insert values with
INSERT INTO [ProxyDB].[dbo].[logMsg]
([msg]
,[AppId])
VALUES
('Text Test',1)
Getting error message:
Msg 213, Level 16, State 1, Procedure TrgInslogMsg, Line 14
Insert Error: Column name or number of supplied values does not match table definition.
Urgent help is required
I have a table which has 4 fields, patientid,testdate,testtype,results.
I want to select the most recent testdate by a patient regardless
of the results, or the testtype. I do however need those fields for my query.
I tried the below, but I get more than 1 record if the person has had two different types of tests. For instance if patient 100 has the following 2 records I just want the most recent
patientid testdate testype results
100 01/02/2002 TBI ASYMP
100 02/02/2001 PPD 00000
select max(testdate)as testdate,testtype, other_id_number
from vw_cms_tb_lasttest
What am missing?
Thanks
group by other_id_number,testtype
order by other_id_number,testtype
I am running a select statement against a function that is giving me different values depending on how it is called. When I run it through sql server management studio, I get the proper results, the default value column has the parameters default value. When I call it through my web app, I get this in the default value column:
*** ERROR OCCURRED level 2 (this is not a default value) ***
Why would the same sql statement get different results?
Here is the call:
select * from dbo.f_GetSProcParameters('webservices_BENEFICIAL_USES_DM_SELECT')
Here are the two functions:
---------------------------------------------------
USE [si_training_db]
GO
/****** Object: UserDefinedFunction [dbo].[f_GetSProcParameters] Script Date: 06/13/2008 09:29:21 ******/
SET ANSI_NULLS OFF
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER function [dbo].[f_GetSProcParameters](@StoredProcedureName VARCHAR(128) )
Returns @sProcParameters Table(ParmName VarChar(128),
DefaultValue VarChar(128),
HasDefault Bit,
IsInput Bit)
/*
* DESCRIPTION : This function returns a table listing all the parameters of a stored
*procedure and the default values of those parameters.
*
* RETURNS : table
*
*
* ORIG AUTHOR : Josh Kinder
* DATE WRITTEN : 3/14/2006
*
* REVISIONS LOG
*
*ID/Date PC# Description
*------- --- ----------------------------------------------------------
*/
As
Begin
Declare
@Count SmallInt,
@Index SmallInt,
@CurParm VarChar(128),
@DefaultVal VarChar(128),
@IsInput BIT
/*----------------------------------------------------------------------------------------------------------------------------------*/
--EDIT CHECK -sProc only
/*----------------------------------------------------------------------------------------------------------------------------------*/
-- Check that the proc name is valid
If OBJECT_ID(@StoredProcedureName, 'P') Is Null
Begin
Goto ScriptErr
End
/*----------------------------------------------------------------------------------------------------------------------------------*/
/*----------------------------------------------------------------------------------------------------------------------------------*/
Declare @ParmTable Table (Id SmallInt Identity Primary Key Clustered, ParmName VarChar(128))
Insert Into @ParmTable
Select
a.Name
From
SysColumns a
Inner Join SysObjects b On b.Id = a.Id
Where
b.Name = @StoredProcedureName
Select
@Count = Count(Id),
@Index = 1
From
@ParmTable
While (@Index<=@Count)
Begin
Select @CurParm = ParmName From @ParmTable Where Id = @Index
Set @DefaultVal = dbo.f_GetsProcParamDefaultValue(@StoredProcedureName,
@CurParm)
SELECT@IsInput = CASE WHEN params.is_output = 1 THEN 0 ELSE 1 END
FROMsys.procedures AS procs
INNER JOINsys.all_parameters AS params ON params.object_id = procs.object_id
LEFT JOINsys.types AS types ON types.system_type_id = params.system_type_id
AND types.user_type_id = params.user_type_id
WHEREprocs.is_ms_shipped = 0
AND params.name = @CurParm
AND procs.name = @StoredProcedureName
Insert Into @sProcParameters
(
ParmName,
DefaultValue,
HasDefault,
IsInput
)
Values
(
@CurParm,
@DefaultVal,
Case When @DefaultVal = 'NoDefaultExists' Then 0 Else 1 End,
@IsInput
)
Set @Index = @Index + 1
End
ScriptErr:
Return
End
---------------------------------------------------
USE [si_training_db]
GO
/****** Object: UserDefinedFunction [dbo].[f_GetsProcParamDefaultValue] Script Date: 06/13/2008 09:30:07 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER function [dbo].[f_GetsProcParamDefaultValue]
(
@StoredProcedureName VarChar(128),
@ParamName VarChar(128)
)
ReturnsVarChar(128)
/*
* DESCRIPTION : This function returns a table listing all the parameters of a stored
*procedure and the default values of those parameters.
*
The following copyright info is for the parsing algorithm to get the default value.
I obtained the code from SQL Farms Solutions and their only stipulation for use is
that the copyright info remain with the code. Although I customized it for us, it is
still their algorithm.
==================================================================================
Copyright © SQL Farms Solutions, www.sqlfarms.com. All rights reserved.
This code may be used at no charge as long as this copyright notice is not removed.
==================================================================================
* RETURNS : table
*
*
* ORIG AUTHOR : Josh Kinder
* DATE WRITTEN : 3/14/2006
*
* REVISIONS LOG
*
*ID/Date PC# Description
*------- --- ----------------------------------------------------------
*/
As
Begin
Declare
@minRow Int,
@maxRow Int,
@tmpInt Int,
@tmpText VarChar(4000),
@tmpCharPos1 Int,
@tmpCharPos2 Int,
@tmpCharPos3 Int,
@ParameterDefault VarChar(128),
@sProcTextVarChar(4000),
@DelimiterChar(1),
@Count SmallInt,
@Index SmallInt,
@CurTextVarChar(4000)
Select
@minRow = Null,
@maxRow = Null,
@Delimiter = char(13)
Declare @ProcText Table (Id Int Identity(1, 1) Primary Key Clustered,
ProcText VarChar(4000))
Insert Into @ProcText
Select
a.Text
From
SysComments a
Inner Join SysObjects b On b.Id = a.Id
Where
b.Name = @StoredProcedureName
Select
@Count = Count(Id),
@Index = 1
From
@ProcText
While (@Index<=@Count)
Begin
Select @CurText = Coalesce(@CurText,'') + ProcText From @ProcText Where Id = @Index
Set @Index = @Index + 1
End
/*----------------------------------------------------------------------------------------------------------------------------------*/
--EDIT CHECKS
/*----------------------------------------------------------------------------------------------------------------------------------*/
-- Check that the parameter name is valid for the proc
If Not Exists(
Select
1
From
INFORMATION_SCHEMA.PARAMETERS
Where
SPECIFIC_NAME = @StoredProcedureName
And PARAMETER_NAME = @ParamName
)
Begin
Set @ParameterDefault = '*** ERROR OCCURRED level 1 (this is not a default value) ***'
Goto ScriptErr
End
/*----------------------------------------------------------------------------------------------------------------------------------*/
/*----------------------------------------------------------------------------------------------------------------------------------*/
/*----------------------------------------------------------------------------------------------------------------------------------*/
--Get sProc into a workable temporary table
/*----------------------------------------------------------------------------------------------------------------------------------*/
Declare @ProcContent Table (Idx Int Identity(1, 1) Primary Key Clustered,
ProcText VarChar(4000))
Insert Into @ProcContent
Select Value From dbo.f_Split(@CurText, @Delimiter, 1, 0)
-- Make sure that some rows were returned successfully
If @@ROWCOUNT = 0
Begin
Set @ParameterDefault = '*** ERROR OCCURRED level 2 (this is not a default value) ***'
Goto ScriptErr
End
/*----------------------------------------------------------------------------------------------------------------------------------*/
/*----------------------------------------------------------------------------------------------------------------------------------*/
/*----------------------------------------------------------------------------------------------------------------------------------*/
--Get location of parm and get ready to parse
/*----------------------------------------------------------------------------------------------------------------------------------*/
-- Get the first line where the parameter is referenced in the proc code.
-- (the LIKE here is a little complex since it is possible that multiple parameters
-- will start with the same string. Most cases of interest are covered by the
-- conditions listed below).
Select
@minRow = Min(Idx)
From
@ProcContent
Where
ProcText Like '%' + @ParamName + ' %'
Or ProcText Like '%' + @ParamName + Char(9) + '%'
Or ProcText Like '%' + @ParamName + Char(10) + '%'
Or ProcText Like '%' + @ParamName + Char(13) + '%'
Or ProcText Like '%' + @ParamName + '=%'
Or ProcText Like '%' + @ParamName + '%=%'
Or ProcText Like '%' + @ParamName + ',%'
-- Check that the parameter is referenced in the code
If @minRow Is Null
Begin
Set @ParameterDefault = '*** ERROR OCCURRED level 3 (this is not a default value) ***'
Goto ScriptErr
End
-- Get the proc line where the word 'AS' is declared. 'AS' is required
-- upon proc creation to complete the variable declaration.
-- Note: This cover most cases of interest. There could be scenarios where
-- additional condition should be applied.
Select
@maxRow = Min(Idx)
From
@ProcContent
Where
ProcText Like '% AS'
Or ProcText Like '% AS '
Or ProcText Like '% AS' + Char(9)
Or ProcText Like '% AS' + Char(10)
Or ProcText Like '% AS' + Char(13)
Or ProcText Like 'AS %'
Or Upper(RTrim(LTrim(ProcText))) = Char(10) + 'AS'
Or Upper(RTrim(LTrim(ProcText))) = 'AS'
Or Upper(RTrim(LTrim(ProcText))) = 'AS' + Char(10)
Or Upper(RTrim(LTrim(ProcText))) = 'AS' + Char(13)
Or Upper(RTrim(LTrim(ProcText))) = 'AS' + Char(13) + Char(10)
Or Upper(RTrim(LTrim(ProcText))) = 'AS' + Char(10) + Char(13)
-- Check that the 'AS' string was found successfully
If @maxRow Is Null
Begin
Set @ParameterDefault = '*** ERROR OCCURRED level 4 (this is not a default value) ***'
Goto ScriptErr
End
/*----------------------------------------------------------------------------------------------------------------------------------*/
/*----------------------------------------------------------------------------------------------------------------------------------*/
/*----------------------------------------------------------------------------------------------------------------------------------*/
--Parse and get the default value
/*----------------------------------------------------------------------------------------------------------------------------------*/
-- Get the first proc line of code where the parameter is referenced, for string processing,
-- and append to it all proc rows until the 'AS' string
Select
@tmpText = LTrim(RTrim(Replace(Replace(ProcText, Char(10), ''), Char(13), ''))) + ' '
From
@ProcContent
Where
Idx = @minRow
While @minRow < @maxRow
Begin
Set @minRow = @minRow + 1
Select
@tmpText = @tmpText + ' ' + LTrim(RTrim(Replace(Replace(ProcText, Char(10), ''), Char(13), ''))) + ' '
From
@ProcContent
Where
Idx = @minRow
End
-- Find the position of the parameter name. Delete all text before that position.
Set @tmpInt = Null
Set @tmpInt = PatIndex('%' + @ParamName + '%', @tmpText) - 1
Set @tmpText = Right(@tmpText, Len(@tmpText) - @tmpInt)
-- At this point we are nearly done:
-- We check whether the character '=' comes before the 'AS' or ',' string
-- If not- the parameter has no default value.
-- If so, we continue to find the value of the default parameter
Set @tmpCharPos1 = PatIndex('%=%', @tmpText)
Set @tmpCharPos2 = PatIndex('%,%', @tmpText)
Set @tmpCharPos3 = PatIndex('% AS %', @tmpText)
If @tmpCharPos1 <= 0
Or (@tmpCharPos1 > @tmpCharPos2 And @tmpCharPos2 > 0)
Or (@tmpCharPos1 > @tmpCharPos3 AND @tmpCharPos3 > 0)
Begin
-- The column does not have a default
Set @ParameterDefault = 'NoDefaultExists'
End
Else
Begin
-- Column has a default and it is left to find it.
-- First chop the string until the '=' character
Set @tmpInt = NULL
Set @tmpInt = PatIndex('%=%', @tmpText) - 1
Set @tmpText = LTrim(Right(@tmpText, Len(@tmpText) - @tmpInt))
-- Now, we p*** the remaining string until we get a ',' or a ' ' character
Set @tmpCharPos1 = NULL
Set @tmpCharPos2 = NULL
Set @tmpCharPos1 = PatIndex('%,%', @tmpText)
Set @tmpCharPos2 = PatIndex('% %', @tmpText)
Set @tmpInt = NULL
If @tmpCharPos2 > @tmpCharPos1 AND @tmpCharPos1 > 0
Set @tmpInt = @tmpCharPos1 - 1
Else
Set @tmpInt = @tmpCharPos2 - 1
If @tmpInt <= 0
Begin
Set @ParameterDefault = '*** ERROR OCCURRED level 5 (this is not a default value) ***'
Goto ScriptErr
End
Set @ParameterDefault = SubString(@tmpText, 1, @tmpInt)
-- If the parameter default is a string, then we will have an '' at each side of it.
-- These last lines of code will get rid of the ''.
If Len(@ParameterDefault) >= 1
If Right(@ParameterDefault, 1) = ''''
Set @ParameterDefault = Left(@ParameterDefault, Len(@ParameterDefault) - 1)
If Len(@ParameterDefault) >= 1
If Left(@ParameterDefault, 1) = ''''
Set @ParameterDefault = Right(@ParameterDefault, Len(@ParameterDefault) - 1)
End
/*----------------------------------------------------------------------------------------------------------------------------------*/
/*----------------------------------------------------------------------------------------------------------------------------------*/
Goto ScriptExit
ScriptErr:
ScriptExit:
Return @ParameterDefault
End
I am currently trying to write a query that pulls a summation of item specific data from sales orders. For simplicity's sake, the column structure can be something like the following...
Item#,
PoundsDuringWeekNumber (this would be the current week number out of the 52 weeks in a year and the pounds of the item during that week)
However, those are not going to be the only 2 columns. The idea of the query is that the user would be able to provide the query a date range (say 2 months) and the columns would then morph into the following...
Item#,
PoundsDuringWeekNumber (current),
PoundsDuringWeekNumber(current - 1),
PoundsDuringWeekNumber (current - 2),
etc. etc.
PoundsDuringWeekNumber(current - 8)
Initial ideas where to create a function to execute the summation of the pounds during the date range of the week in question and execute it across the columns, but with the indeterminable number of columns, the query would not know how many times to execute the function.
I swear I have done this before and can't remember how.
I want to select columns in a SELECT statement by their number instead of name.
I have looked everywhere for the syntax.
Also, is there a function to 'count' the number of columns in a table?
Thanks.
I want to select with column order without field name .
Is it possible ?
SQL2000 db
...
I want to select a field by its order in table, but without naming it to have a constant name of it, like :
select (column01) as L1 from myTable
Hi,
I have SQL database 2000 which has one table Sheet1, I retrieved the columns in the ListBox, then chosed some of them and moved it to ListBox2.
The past scenario worked great, and I checked the moved values, it was succesfully moved, but when I tried to copy the values in ArrayList to do a select statement it didn't worked at all.
public string str;protected void Button3_Click(object sender, EventArgs e)
{ArrayList itemsSelected = new ArrayList(); string sep = ",";
//string str;for (int i = 0; i < ListBox2.Items.Count; i++)
{if (ListBox2.Items[i].Selected)
{
itemsSelected.Add(ListBox2.Items[i].Value);
}
int itemsSelCount = itemsSelected.Count; // integer variable which holds the count of the selected items.
str = ListBox2.Items[i].Value + sep;
Response.Write(str);
}
SqlConnection SqlCon = new SqlConnection("Data Source=AJ-166DCCD87;Initial Catalog=stat_rpt;Integrated Security=True;Pooling=False");
String SQL1 = "SELECT " + str + " from Sheet1"; SqlDataAdapter Adptr = new SqlDataAdapter(SQL1, SqlCon);
SqlCommandBuilder CB = new SqlCommandBuilder(Adptr);DataTable Dt = new DataTable();
Adptr.Fill(Dt);
//return Dt;
GridView1.DataBind();
SqlCon.Close();
}
I did some changes and the new error message is
Incorrect syntax near the keyword 'from'.
Thank you
Hi.
I have an sql table which contains a number and a name. I would like to create a select statement that will display these two fields in the format :
"number | name", but if there is a null value in the number it will display only the name and vice versa.
How can I do it ?
Any help is appreciated.
I would like to write a select statement where I specify a list of values in the 'Select' line, and would like the output to have one line for each element.
I tried using Case with no success.
For example:
Select a.id, a.timestamp, ('rowA','rowB') as 'Tag' from tableOne a where a.id = '1'
So the 'where' line would produce one row, however, the overall statement would produce two.
ID TimeStamp Tag
--------------------------------
1 2012-12-12 rowA
1 2012-12-12 rowB
I have a table that holds notes for item's. I'm want to do a select statement where one of my columns assigns a sequential value to each row based on the item number. Would like data to look like this where doc_no would be my row_number function:
item_no seq_no note doc_no
ABC 1 blah 1
ABC 2 blahh 1
ABC 3 bla3 1
XYZ 1 more n 2
XYZ 2 another 2
EFG 1 blahhh 3
I have a table names Alert_Event and a new column named BSP_Phone has been added to the table. I am trying to set NULL values to the column and I get the below error. I am setting null values in the bolded text in the query.
Error Message:
Msg 213, Level 16, State 1, Procedure SaveBSPOutageInfo, Line 22
Column name or number of supplied values does not match table definition.USE [gg]
GO
/****** Object: StoredProcedure [dbo].[SaveBSPOutageInfo] Script Date: 10/17/2013 19:01:20 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER PROCEDURE [dbo].[SaveBSPOutageInfo] @eventCreatedDate DATETIME, @eventOrigin varchar(10),
[code]....
Using c# in the compact framework, is there a way to do a parameterized query for counting the number of records where a specified column is null. I tried all of these, but none of them work:
cmd.Add(new SqlCeParameter("@IntColumn", SqlInt32.Null));
cmd.CommandText = "select count(*) from TableName where IntColumn is not @IntColumn";
cmd.Add(new SqlCeParameter("@IntColumn", DBNull.Value));
cmd.CommandText = "select count(*) from TableName where IntColumn is not @IntColumn";
cmd.Add(new SqlCeParameter("@IntColumn", SqlInt32.Null));
cmd.CommandText = "select count(*) from TableName where not IntColumn = @IntColumn";
cmd.Add(new SqlCeParameter("@IntColumn", DBNull.Value));
cmd.CommandText = "select count(*) from TableName where not IntColumn = @IntColumn";
cmd.Parameters.Add(new SqlCeParameter("@IntColumn", SqlDbType.Int32));
cmd.Parameters["@IntColumn"].Value = SqlInt32.Null;
cmdGetNumRead.CommandText = "select count(*) from TableName where IntColumn is not @IntColumn";
cmd.Parameters.Add(new SqlCeParameter("@IntColumn", SqlDbType.Int32));
cmd.Parameters["@IntColumn"].Value = SqlInt32.Null;
cmdGetNumRead.CommandText = "select count(*) from TableName where not IntColumn = @IntColumn";
cmd.Parameters.Add(new SqlCeParameter("@IntColumn", SqlDbType.Int32));
cmd.Parameters["@IntColumn"].Value = DBNull.Value;
cmdGetNumRead.CommandText = "select count(*) from TableName where IntColumn is not @IntColumn";
cmd.Parameters.Add(new SqlCeParameter("@IntColumn", SqlDbType.Int32));
cmd.Parameters["@IntColumn"].Value = DBNull.Value;
cmdGetNumRead.CommandText = "select count(*) from TableName where not IntColumn = @IntColumn";
cmd.Parameters.Add(new SqlCeParameter("@IntColumn", SqlDbType.Variant));
cmd.Parameters["@IntColumn"].Value = SqlInt32.Null;
cmd.CommandText = "select count(*) from Meter where IntColumn is not @IntColumn";
cmd.Parameters.Add(new SqlCeParameter("@IntColumn", SqlDbType.Variant));
cmd.Parameters["@IntColumn"].Value = SqlInt32.Null;
cmd.CommandText = "select count(*) from Meter where not IntColumn = @IntColumn";
md.Parameters.Add(new SqlCeParameter("@IntColumn", SqlDbType.Variant));
cmd.Parameters["@IntColumn"].Value = DBNull.Value;
cmd.CommandText = "select count(*) from Meter where IntColumn is not @IntColumn";
cmd.Parameters.Add(new SqlCeParameter("@IntColumn", SqlDbType.Variant));
cmd.Parameters["@IntColumn"].Value = DBNull.Value;
cmd.CommandText = "select count(*) from Meter where not IntColumn = @IntColumn";
Whenever I use a "is not" in the query I get an exception, otherwise it returns a count of 0 which is not accurate. Any help will be appreciated.
I have two tables (i.e. Table1 and Table2).
SELECT
* FROM [dbo].[Table1]
Date
id
9/15/2015
[code]...
Table2 has three columns (i.e. Date, Count and Rule Type). Column “Rule Type “has a default value which is “XYZ”..Now I want to insert Data from Table1 to Table2. I am using following query:-
declare @Startdate
datetime
DEclare @enddate
datetime
[code]...
Column name or number of supplied values does not match table definition.I am using SQL 2012. I understand Table1 has 2 Columns but Table2 has 3 Columns. Is there anyway, I can move data from source table to Destination table where Destination Table has more number of Columns?
Hello, I have a field of type the Var, the stored data makes about 700 characters.
During a select through the query analyser, it tronque in about 200 or 300 characters.
How to explain it?
thank in advance
Pascal
Hello all,
I have been working with a DetailsView control for the past week and it is a great control, but also lacks on some departments. Anyhow I need to know what the best approach for this scenerio would be?
I have a SqlDataSource"
<asp:SqlDataSource ID="SqlUpsertAffiliateDetails" runat="server" ConnectionString="<%$ ConnectionStrings:connectionstring %>"
SelectCommand="SELECT am.affiliate_id AS AffiliateId, am.member_id AS MemberId, m.First_Name, m.Last_Name, am.category_id AS CategoryId, ac.category_name, am.profile_web_address AS WebAddress, am.profile_email_1 AS Email, am.comments AS Comments, am.date_modified FROM tAffiliateMaster AS am WITH (NOLOCK) INNER JOIN tAffiliateCategories AS ac WITH (NOLOCK) ON am.category_id = ac.category_id INNER JOIN rapdata..Member AS m WITH (NOLOCK) ON am.member_id = m.Member_Number WHERE (am.affiliate_id = @AffiliateId)"
UpdateCommand="spUpsertAffiliateProfile" UpdateCommandType="StoredProcedure">
<SelectParameters>
<asp:QueryStringParameter Name="AffiliateId" QueryStringField="affiliate_id" />
</SelectParameters>
<UpdateParameters>
<asp:Parameter Name="Action" Type="Byte" DefaultValue="2" />
</UpdateParameters>
</asp:SqlDataSource>
And my SP:/* 09-19-07 Used to update affiliate profile */
CREATE PROCEDURE spUpsertAffiliateProfile
@Action tinyint,
@AffiliateId int,
@MemberId int = -1,
@CategoryId int,
@WebAddress varchar(50),
@Email varchar(50),
@Comments varchar(1500)
AS
SET NOCOUNT ON
-- Find errors first, check is not needed if deleting
IF @Action <> 3
IF NOT EXISTS (SELECT Member_Number FROM rapdata..Member_Association WHERE Member_Number = @MemberId AND Status = 'A' AND Association_ID = 'TRI' AND Bill_Type_Code LIKE '%AF%')
BEGIN
SELECT retval = 'A qualified member ID was NOT found. Action Failed.', errorcount = 1, 0 AS affiliate_id
RETURN
END
IF @Action = 1
IF EXISTS (SELECT member_id FROM tAffiliateMaster WHERE member_id = @MemberId)
BEGIN
SELECT retval = 'This member has already been listed. Action Failed.', errorcount = 1, 0 AS affiliate_id
RETURN
END
IF @Action = 1 AND @AffiliateId = 0-- insert
BEGIN
INSERT INTO tAffiliateMaster
(member_id, category_id, profile_web_address, profile_email_1, comments)
VALUES
(@MemberId, @CategoryId, @WebAddress, @Email, @Comments)
SELECT retval = 'Record Entered', errorcount = 0, @@IDENTITY AS affiliate_id
RETURN
END
ELSE IF @Action = 2 AND @AffiliateId > 0-- update
BEGIN
UPDATE
tAffiliateMaster
SET
category_id= @CategoryId,
profile_web_address=@WebAddress,
profile_email_1=@Email,
comments=@Comments
WHERE
affiliate_id = @AffiliateId AND member_id = @MemberId
SELECT retval = 'Record Updated', errorcount = 0, @AffiliateId AS affiliate_id
RETURN
END
ELSE IF @Action = 3 AND @AffiliateId > 0-- delete
BEGIN
DELETE
tAffiliateMaster
WHERE
affiliate_id = @AffiliateId
SELECT retval = 'Record Deleted', errorcount = 0, 0 AS affiliate_id
RETURN
END
GO
My question is how will I be able to return the retval? Will I need to do it within the code behind of the SqlDataSource Updated Event?
Thanks!