Adding A Column Name To A Table In Each Of The Databases Based On A Condition
Oct 3, 2007
i have the folowing databases DB1,DB2,DB3,D4,DB5........
i have to loop through each of the databases and find out if the database has a table with the name 'Documents'( like 'tbdocuments' or 'tbemplyeedocuments' and so on......)
If the tablename having the word 'Documents' is found in that database i have to add a column named 'IsValid varchar(100)' against that table in that database and there can be more than 1 'Documents' table in a database.
can someone show me the script to do it?
Thanks.
View 3 Replies
ADVERTISEMENT
Nov 20, 2013
I have a column with serial numbers 1, 2,3,4,....etc...I want to have P1 for first 4 serial numbers to be displayed in a separate column beside Serial number column and for the next four serial numbers (5,6,7,8) it should be P2 and like that I want till P13 and for next again it should start with P1(I mean after P13 it should give again P1 instead of P14) and continue the same process.
Column name of Serial number is [S.No]
table name for example is #temp1
View 3 Replies
View Related
Sep 26, 2007
Hi,
I have a table as follows
Table Master
{
Id varchar(20),
Cat1 datetime,
Cat2 datetime,
Cat3 datetime,
Cat4 datetime
}
and the data in the table is as follows
Table Master
{
Id cat1 cat2 cat3 cat4
-----------------------------------------------
1 d11 null d13 d14
2 d21 d22 d23 d24
3 NULL d32 d33 d34
4 d41 d42 NULL NULL
}
I want to retrive column names and its values wheb the ID matches to some value.
Can any one please let me know how to do this?
Thanks alot
~Mohan
View 3 Replies
View Related
Sep 21, 2007
Hi,
I have at table as foolows
Table Cat3
{
ID,
Update datetime
}
and also have a master table as follows
Table Master
{
ID,
Cat1 Datetime,
Cat2 datettime
}
My requirement is to alter themaster table schema i.e to add a column with the name as of the table name i.e Cat3 and will lok lie as foolows
Table Master
{
ID,
Cat1 Datetime,
Cat2 datettime,
Cat3 Datetime
}
I would like to insert the data to this column. The sample output is as follows
Before insertng the data of table ;Cat3' into the Master table
Table Master
{
Id Cat1 Cat2
---------------------------------
1 D1 D2
2 D2 NULL
3 D3 D4
}
And The Cat3 table data is as follows
Table Cat3
{
ID Update
--------------------------
1 D5
3 D6
4 D7
}
The final putput of the master table should be as follows
Table Master
{
Id Cat1 Cat2 Cat3
------------------------------------------------------
1 D1 D2 D5
2 D2 NULL NULL
3 D3 D4 D6
4 NULL NULL D7
}
Can any one please let me know the query to achieve this
Thank you very much for your time and support
~Moahn
View 10 Replies
View Related
Aug 7, 2007
Hello all. I hope someone can offer me some help. I'm trying to construct a SQL statement that will be run on a Dataset that I have. The trick is that there are many conditions that can apply. I'll describe my situation:
I have about 1700 records in a datatable titled "AISC_Shapes_Table" with 49 columns. What I would like to do is allow the user of my VB application to 'create' a custom query (i.e. advanced search). For now, I'll just discuss two columns; The Section Label titled "AISC_MANUAL_LABEL" and the Weight column "W". The data appears in the following manner:
(AISC_Shapes_Table)
AISC_MANUAL_LABEL W
W44x300 300
W42x200 200
(and so on)
WT22x150 150
WT21x100 100
(and so on)
MT12.5x12.4 12.4
MT12x10 10
(etc.)
I have a listbox which users can select MULTIPLE "Manual Labels" or shapes. They then select a property (W for weight, in this case) and a limitation (greater than a value, less than a value, or between two values). From all this, I create a custom Query string or filter to apply to my BindingSource.Filter method. However I have to use the % wildcard to deal with exceptions. If the user only wants W shapes, I use "...LIKE 'W%'" and "...NOT LIKE 'WT%" to be sure to select ONLY W shapes and no WT's. The problems arises, however, when the user wants multiple shapes in general. If I want to select all the "AISC_MANUAL_LABEL" values with W <= 40, I can't do it. An example of a statement I tried to use to select WT% Labels and MT% labels with weight (W)<=100 is:
Code SnippetSELECT AISC_MANUAL_LABEL, W
FROM AISC_Shape_Table
WHERE (W <= 100) AND ((AISC_MANUAL_LABEL LIKE 'MT%') AND (AISC_MANUAL_LABEL LIKE 'WT%'))
It returns a NULL value to me, which i know is NOT because no such values exist. So, I further investigated and tried to use a subquery seeing if IN, ANY, or ALL would work, but to no avail. Can anyone offer up any suggestions? I know that if I can get an example of ONE of them to work, then I'll easily be able to apply it to all of my cases. Otherwise, am I just going about this the hard way or is it even possible? Please, ANY suggestions will help. Thank you in advance.
Regards,
Steve G.
View 4 Replies
View Related
Jul 20, 2005
HI all,In SQL Server, i have a function which will return a table. likecreate function fn_test (@t int) returns table asreturn (select * from table)now i want the function to retun the table based on some condition like belowcreate function fn_test(@t int) returns table asif @t = 1 return (select * from table1)else return (select * from table2)It is not working for me. Please give me your suggesstions. It's very urgent.Thank you in advance....
View 1 Replies
View Related
Jan 30, 2015
My requirement is below.enhancing the T- sql query as I was told not to use SSIS.
Insert data from Table A to Table B with conditions:
1. Truncate gender to one character if necessary.
2. Convert character fields to uppercase as necessary.
3. For systems that supply both residential and mailing addresses, use the residential address if available (both street_address and zip fields have value), mailing address otherwise.
In SSIS I took conditional split with 'ISNULL(res_street_address) == TRUE || ISNULL(res_zip) == TRUE '
default outputname :Consider Res Address; Outputname:Consider mail address.
and mapped as:
(Table A) mail_street_address---street address(Table B)
(Table A) mail_city----------------City(Table B)
(Table A) mail_Zip----------------Zip(Table B)
(Table A) mail_state-------------state(Table B)
(Table A) res_street_address--street address(Table B)
(Table A) res_city---------------City(Table B)
(Table A) res_Zip----------------Zip(Table B)
(Table A) res_state--------------state(Table B)
I want to do the same with T-sql code too:
I came up with below T-SQl but unable to pick(street,city,state,zip columns as I have take combination of street and zip from Table A not individual columns as I wrote in below query) based on above condition(3):
Insert into TABLE B
SELECT
Stats_ID
,UPPER(first_name) first_name
,UPPER(middle_name )middle_name
,UPPER(last_name) last_name
,UPPER(name_suffix) name_suffix
[code]....
View 2 Replies
View Related
Apr 12, 2006
hello all,this might be simple:I populate a temp table based on a condition from another table:select @condition = condition from table1 where id=1 [this will giveme either 0 or 1]in my stored procedure I want to do this:if @condition = 0beginselect * into #tmp_tablefrom products pinner joinsales s on p.p_data = s.p_dataendelsebeginselect * into #tmp_tablefrom products pleft joinsales s on p.p_data = s.p_dataendTha above query would not work since SQL thinks I am trying to use thesame temp table twice.As you can see the major thing that gets effected with the condictionbeing 0/1 is the join (inner or outer). The actual SQL is much biggerwith other joins but the only thing changing in the 2 sql's is the joinbetween products and sales tables.any ideas gurus on how to use different sql's into temp table based onthe condition?thanksadi
View 5 Replies
View Related
Apr 16, 2008
HI
I have the following scenario in my report.
-The data is displayed in a table
-The table groups by one field
-Each table row calls a subreport
-There is about 6 paramaters in the report
-The last paramater of the list of paramters is a multivalue paramater and based on what is selected in the list the corresponding subreport must be shown.
-So i use a custom vbscript funtion to determine if a specific value was selected or not.
This functionality is working fine.
My problem is if the user does not select all the values in the multi select then i want to make the row invisble
and remove the whitespace so that there is not a gap between the other subreports which is shown.
I can make the subreport invisible inside the row but there is still the white space which does not display very nicly.
How can i make the row invisible if the vbscript function that is called returns a false value?
Here is the funtion I call -> Code.InArray("ValueToSearchFor", Parameters!MultiValueDropDown.Value)
The Function returns a true or false.
Thanks.
View 3 Replies
View Related
Mar 27, 2015
I have 2 independent queries which run just fine, the 2nd one returns a dollar value. I need this dollar value as a column in my first query so that I can return it in a reporting program. The 2 queries are pasted below.
SELECT dbo.vw_tphillip_Customer_Inv.InvoiceNumber AS "InvoiceNumber",
dbo.vw_tphillip_Customer_Inv.TransactionType AS "TransactionType",
dbo.vw_tphillip_Customer_Inv.Date AS "Date",
dbo.vw_tphillip_Customer_Inv.DueDate AS "DueDate",
dbo.vw_tphillip_Customer_Inv.CustomerName AS "CustomerName",
[Code] ....
View 6 Replies
View Related
Sep 21, 2005
Currently I'm trying to add a column based on certain criteria based on the following data:
CallID GroupName CustomerPending
------ ----------- ------------
00500588FollowupN
00500588FollowupN
00500588Server N
00500588Service DeskN
00500588Service DeskN
Basically I'm trying to add an extra column, so that whenever the GroupName is "Followup", then a 'Y' will appear in the CustomerPending column for all instances of that CallID. I tried with the following, but it only provides a 'Y' in the rows (not the CallId's) where "Followup" is found.
--------------------------------------
UPDATE dbo.Asgnmnt
SET CustomerPending = 'Y'
FROM dbo.Asgnmnt
WHERE dbo.Asgnmnt.GroupName IN ('SD Followup')
ALTER Table Asgnmnt
ALTER column CustomerPending varchar(1)
UPDATE dbo.Asgnmnt
SET CustomerPending = 'N'
FROM dbo.Asgnmnt
WHERE dbo.Asgnmnt.GroupName NOT IN ('SD Followup')
ALTER Table Asgnmnt
ALTER column CustomerPending varchar(1)
---------------------------------------
Any assistance appreciated.
View 4 Replies
View Related
Aug 10, 2015
I have table that contains below data
CreatedDate ID Message
2015-05-29 7:00:00 AOOze abc
2015-05-29 7:05:00 AOOze start
2015-05-29 7:10:00 AOOze pqy
2015-05-29 7:15:00 AOOze stop
2015-05-29 7:20:00 AOOze lmn
and so on following the series for every set of same ID with 5 entries for each ID
I need to Find Maximum interval time for each ID and for condition in given message (between message like Start and Stop) I used below query and it works fine
select Id, max(CreatedDate) AS 'MaxDate',min(CreatedDate) AS 'MinDate',
DATEDIFF(second,min(CreatedDate),max(CreatedDate)) AS 'MaxResponseTimeinSeconds' from Table where Id in (
SELECT distinct Id
from Table
where Message like 'stop')
group by Id
Above query displays max response time for ID A00ze as 20 minutes, but stop message has occured at 7.15. I would need to modify the query to return max response time as 15 min(from 7.00 to 7.15).
Difference of starttime(where A00ze id started) and stoptime(where stop string is found in message).
View 7 Replies
View Related
Jul 3, 1999
I need to add a column that has the datatype of integer with a seed and identity increment to a table that already exists and has data in it - and can't all NULLs. I have heard that this not possible if the table already exists.
I have downloaded the demo's of SQL Programmer and a couple of Embarcadero programs to see if that would help, but have had no succes to date.
Thanks for any help,
Alan
View 2 Replies
View Related
Mar 19, 2008
Hi all,
I have a large dataset (currently 131,000 rows) that looks similar to the following:
ID NewPer NewAmt OldPer OldAmt
334 1/07/08 200 22/01/08 200
2396 1/07/08 4000 10/12/07 3600
7650 1/07/08 1100 07/07/06 1200
.
.
.
and I need to create a session temp table (eg ##output) that translates the calculation (NewAmt - OldAmt) into categories such as
"decrease -201 to -500"
"decrease -1 to -200"
"no change"
"increase 1 to 200"
"increase 201 to 500"
so that my final output would look like this:
ID NewPer NewAmt OldPer OldAmt Change ChangeCategory
334 1/07/08 200 22/01/08 200 0 no change
2396 1/07/08 4000 10/12/07 3600 400 increase 201 to 500
7650 1/07/08 1100 07/07/06 1200 -100 decrease -1 to -200
.
.
.
I understand how to add the "Change" column to my temp output table, but am struggling with the ChangeCategory column - can someone point me in the right direction?
Thanks in advance
Jamie
View 3 Replies
View Related
Feb 16, 2005
Can someone give me a clue on this. I'm trying to insert values based off of values in another table.
I'm comparing wether two id's (non keys in the db) are the same in two fields (that is the where statement. Based on that I'm inserting into the Results table in the PledgeLastYr collumn a 'Y' (thats what I want to do -- to indicate that they have pledged over the last year).
Two questions
1. As this is set up right now I'm getting NULL values inserted into the PledgeLastYr collumn. I'm sure this is a stupid syntax problem that i'm overlooking but if someone can give me a hint that would be great.
2. How would I go about writing an If / Else statement in T-SQL so that I can have the Insert statement for both the Yes they have pledged and No they have not pledged all in one stored proc. I'm not to familar with the syntax of writing conditional statements within T-SQL as of yet, and if someone can give me some hints on how to do that it would be greatly appriciated.
Thanks in advance, bellow is the code that I have so far:
RB
Select Results.custID, Results.PledgeLastYr
From Results, PledgeInLastYear
Where Results.custID = PledgeInLastYear.constIDPledgeInLastYear
Insert Into Results(PledgeLastYr)
Values ('Y')
View 1 Replies
View Related
Feb 9, 2006
For example..
select * from mytable where MyNum = 7
If this brings back more than 1 row, I want to display a message that says,
Print 'There is more than one row returned'
Else (If only 1 row returned), I don't want to print anything.
Can I do this? Thx!
View 1 Replies
View Related
Jan 28, 2012
I need to add a child table that will tell us who the participants counselor is, what I did was I did a Make Table query based off the primary key of the Parent table and made that the link (foreign key) for the People_tbl and the Counselor_tbl, so if the counselor changes then the user adds the record to the counselor tbl and then puts in the Effective date. The problem is that when I run a report it doesn't show the present counselor always shows the old counselor?
Code:
SELECT Student_ind.StudentFirstName, Student_ind.StudentLastName, Student_ind.[Student ID], People_tbl.[Family ID], People_tbl.FirstName,
People_tbl.LastName, People_tbl.[Parent ID]
FROM People_tbl RIGHT OUTER JOIN
Student_ind ON People_tbl.[Family ID] = Student_ind.[Family ID]
WHERE (People_tbl.LastName = @Enter_LastName) AND (People_tbl.FirstName = @Enter_FirstName)
View 5 Replies
View Related
Aug 2, 2007
I have a matrix report with 2 column SaleAmount and ProfitAmounts by Month like
Sale Profit
Dealer 5/1/2007 6/1/2007 7/1/2007 5/1/2007 6/1/2007 7/1/2007
A 100 200 300 20 25 15
B 200 250 50 30 45 19
how can i do following 3 things
1)Add Total column for Sale and Average column for Profit
2)Sort report by lastMonth of Sale (here 7/1/2007) High to low
3)if last month of sale(here 7/1/2007) is less than second last month here (6/1/2007) whole row should be red
thanks
View 1 Replies
View Related
Mar 30, 2004
I simply need the ability using SQL to add columns in an existing table before (or after) columns that already exist.
The MS SQL implementation of ALTER TABLE doesn't seem to provide the before or after placement criteria I require. How is this done in MS SQL using SQL or is there a stored procedure I can use?
Thanks.
View 5 Replies
View Related
Mar 25, 2008
Table structure as follows
Employee
Empno empname salary
commission
I want to have an other employee table named employee_modified
Empno empname salary
commission derived_column1(salary+commission)
derived_column2(derived_column1 + xxxx) and so on derive other
columns based on the earlier derived columns)
Is that possible to do it.. or am I doing something wrong.
something like
Select empno , empname , salary , commission,
(salary + commission) as derived_colum1 ,
(derived_colum1 + xxxxx) as derived_colum2 ,
(derived_colum2 + xxxxx) as derived_colum3
into employee_modified from employee
View 3 Replies
View Related
Sep 23, 2015
If on the source I have a new column, the script generated by SqlPackage.exe recreates the table on the background with moving the data into a temp storage. If the table is big, such approach can cause issues.
Example of the script is below: in the source project I added columns [MyColumn_LINE_1] and [MyColumn_LINE_5].
Is there any way I can make it generating an alter statement instead?
BEGIN TRANSACTION;
SET TRANSACTION ISOLATION LEVEL SERIALIZABLE;
SET XACT_ABORT ON;
CREATE TABLE [dbo].[tmp_ms_xx_MyTable] (
[MyColumn_TYPE_CODE] CHAR (3) NOT NULL,
[Code] ....
The same script is generated regardless the table having data or not, having a clustered or nonclustered PK.
View 7 Replies
View Related
Dec 18, 2001
I have a table size 2078mb, number of row +530,900. Is it normal for sql to lock users out of the db when I add a column to the end of the table? I'm running SQL 7.0. The table has 4 col regular indexes. No primary keys. It locked the user out for about 10 min. I thought with SQL 7.0 this problem went away?
View 1 Replies
View Related
Feb 24, 2003
Can I add a column to a database table without dropping and recreating the table?
The problem is that everytime a user creates an action that requires a new table - at the moment I drop the table and recreate the table with the new column.
This requires lots of resources as I have to populate the table again.
Is there a design way I can go around this?
View 5 Replies
View Related
Nov 18, 2014
I have 2 tables: Order(ID, Quantity) and Product(ID,Name, Price) and I want to add a calculated field in Order table based on the price column in the Product table. How do i do that?
this query returns the values i want in the table.
select a.quantity * b.price
from tblCustomerPurchases as a
join tblProduct as b
on a.ID=b.ID
View 17 Replies
View Related
Jul 11, 2013
We have a table with 16 Million records, and also this table is replicated.
We want to add a new column in to this table for some reason?
View 1 Replies
View Related
Jul 9, 2014
I'm trying to add a column trough command "ALTER" and I've tried in many different ways.
Here is the result of statement..
View 1 Replies
View Related
Oct 6, 2014
I am having a problem adding new column to a table via SQLCMD . Here is the code
:r ServerParam.sql
:connect $(sqlServer) -U $(sqlUser) -P $(sqlPass)
DECLARE @cmd varchar(5000)
DECLARE @SServer varchar(1000)
DECLARE @database varchar(1000)
DECLARE @tableName varchar(500)
[Code] ....
When I am running this script, it creates the database and the table but when I am trying to add the last to field vi
ALTER TAABLE ADD
I am getting error
----------------------------------------------------------------------
C:CalJobsSQLCMDSQLScripts>SQLCMD -v subgt=SJI txtFile=LTS_ERROR_10022014.TXT
tblName=LTS_ERROR_10022014 -i CreateErrorTableSQL.sql
Sqlcmd: Successfully connected to server 'VULCAN'.
------------------------------------------------
Start processing Table: CalJobsErrors.dbo.SJI_LTS_ERROR_10022014
------------------------------------------------
[Code] ....
View 2 Replies
View Related
Jul 20, 2005
I've got a table with 36+ million rows. I've been asked to modify thetable and add in an identity column. The code I used caused SQL tolock up and it maxed out the log files. :)The code I used is:Begin TransactionAlter Table ODS_DAILY_SALES_POSADD ODS_DAILY_SALES_POS_ID BigInt NOT NULL IDENTITY (1,1)CommitIs there a way to break up the code? Maybe only do a few millionrecords at a time? Or is there a way to do this without lockinganything up?Thanks,Jennifer
View 2 Replies
View Related
Feb 7, 2007
I have the following tablestblGroupsGroupID intGroupName nvarchar(50)tblGroupMembersGroupID int (FK)UserID intI need a stored proc which:returns the groupID and name of all the groups of which userid 5 is a member AND also return the number of members that a group has (so the numbers of records in tblGroupMembers with a specific groupID)I have 2 sp's:myspGetGroupMembersCount which takes as input a groupID and has as output an integer valuemyspGetGroupsforUser which must return the entire resultsetSo say that userID 5 is a member of GroupID 6,18 and 22the following must be the resultset:UserID GroupID GroupName Members5 6 bla 132 5 18 yes 17 5 22 whatever 200 I think I need to call myspGetGroupMembersCount from within myspGetGroupsforUser and add it to the resultset (I dont want to work with a temptable)...but I dont know how...
View 2 Replies
View Related
Oct 3, 2007
I have the folowing databases DB1,DB2,DB3,D4,DB5........
I have to loop through each of the databases and find out if the database has a tablename with the word 'Documents'( like 'tbdocuments' or 'tbemployeedocuments' and so on......)
If the tablename having the word 'Documents' is found in that database i have to add a column named 'IsValid varchar(100)' against that table in that database and there can be more than 1 'Documents' table in a database.
can someone show me the script to do it?
Thanks.
View 6 Replies
View Related
Aug 13, 2004
I have an existing table which has about 70 columns with 3 million rows in it. I was asked to add additional 50 new columns into the table. I have tried to add them in through the Enterprise manager design table but experiencing some problems. The adding process seemed never going to be end. Is there any good efficient way to do it??? I appreciate the help!
J8
View 4 Replies
View Related
Dec 5, 2005
Sorry I'm pretty new to SQL so I don't know if this is a simple question. I have a table, and I am trying to add a column to the table and populate this column using what would be called an 'IF' function in Excel.
Basically 'column A' has numbers in it. I want SQL to look at 'column A' and if the first 5 digits of the number in 'column A' are 00001, then put 'description A' into new column 'column B'. If the first 5 digits of the number in 'column A' are 00002, then put 'description B' into 'column A' etc.
Any ideas?
View 2 Replies
View Related
Jan 21, 2014
I want to add new primary key into existing table which already has a primary key. But,I do not want to remove the old primary key, since there are many records and the old primary key also have relationship with other table
When I am using this query:
alter table hem154
add indexNO uniqueidentifier default newid()
alter table hem154
add CONSTRAINT pk_hem154_indexNo PRIMARY KEY (PK_indexNO)
go
Note:
Hem154 ~ Table name
indexNo ~ Column Name
I get this runtime error:
Msg 1779, Level 16, State 0, Line 1
Table 'hem154' already has a primary key defined on it.
Msg 1750, Level 16, State 0, Line 1
Could not create constraint. See previous errors.
View 4 Replies
View Related
