I know this has come up before and I have tried several of the solutions found within the forum but I just can't seem to import my file correctly and could use some input, please.
Sample file (less fields than actual file):
Name (str), Phone# (str), Description(str), Resolved(bool), Met(bool)
"Kay, Mary","123-4567","Used a "."not a"," in text", "1", "1"
The text is qualified with " and columns delimited with commas but the description field has embedded quotes and commas. Normally it works except if there embedded quotes and commas.
I have tried unqualified data and undouble, but that does not work either because of the embedded commas in quotes.
Do I need to do something before the data flow? Do I need to do custom code similar to undouble (I tried modifying undouble but using unqualified fields caused the source file to not like the data and go red)? Should the row be read as one field and parsed?
I have a package that extracts data from a Flat File. If any errors or truncation occur during the extraction of the input data, the package should fail. All fields that have erroneous values should be reported in the log file.
My Solution: - I have created a Data Flow Task that contains a Flat File Source Adapter and a dummy destination.
- I have left the default "Error Output" configuration of the Flat File Source adapter, namely if a truncation or an error occur for a certain column, then the reaction is "Fail Component".
Problem: This configuration gives me only the first erroneous column in the row being processed.
Question: Is it possible to make the Flat File Source adapter continue parsing the current row before it fails? This way, I would be able to get all the erroneous columns in the row in one shot.
I am testing SSIS and have created a Flat File Destination. I defined the Flat File Connection as New for the first time and it worked fine. Now, I would like to go back and modify the Flat File Connection in the Flat File Destination Editor, but it allows only to create a New connection rather allowing me to edit the existing one. For testing, I can go back and create a new connection, but if my connection had 50-100 columns then it would be an issue to re-create it from scratch.
I have a situation where a tab limited text file is used to populate a sql server table.
The tab limited text file comes from a third party vendor. There are fixed number of columns we need to export to the sql server table. However the third party may add colums in the text file. Whenenver the text file has an added column (which we dont need to import) the build fails since the flat file connection manager does not create the metadata for it again. The problem goes away where I press the button "Reset Columns" since it builds the metadata then. Since we need to build the tables everyday we cannot automate it using SSIS because the metadata does not change automatically. Is there a way out in SSIS?
I am transferring data from an OLEDB source to a Flat File Destination and I want the column width for all of the output columns to 30 (max width amongst the columns selected), but that is not refected in the Fixed Width Flat File that got created. The outputcolumnwidth seems to be the same as the inputcolumnwidth. Is there any other setting that I am possibly missing or is this a possible defect?
I m using SSIS and i am transfering the data from Flat File Source to the OLE DB destination File. The source file contain some corrupt data which i am transfering to the other Flat file destination file.
Debugging is succesful but i am not getting any error output in the Flat file destination file.
i had done exactly which is written in the msdn tutorial of SSIS.
Plz tell me why i am not getting the error output in the destination flat file?
First, a couple of important bits of information. Until last week, I had never touched SISS, and therefore, I know very little about it. I just never had the need to use it...until now. I was able to convert my first 3 flat files to SQL2005 tables by right clicking on "SISS Package" and choosing "SISS Import and Export Wizard". That is the extent of my knowledge! So please, please, please be patient with me and be as descriptive as possible.
I thought I could attach some sample files to this post, but it doesn't look like I can. I'll just paste the information below in two separate code boxes. The first code box is the flat file specifications and the second one is a sample single line flat file similar to what I'm dealing with (the real flat file is over 2 gigs).
My questions are below the sample files.
Code Snippet Record Length 400
Positions Length FieldName
Record Type 01 1,2 L=2 Record Type (Always "01") 3,12 L=10 Site Name 13,19 L=7 Account Number 20,29 L=10 Sub Account 30,35 L=6 Balance 36,37 L=1 Active 37,41 L=5 Filler Record Type 02 1,2 L=2 Record Type (Always "02") 3,4 L=2 State 5,30 L=26 Address 31,41 L=11 Filler Record Type 03 1,2 L=2 Record Type (Always "03") 3,6 L=4 Coder 7,20 L=14 Locator ID 21,22 L=2 Age 23,41 L=19 Filler Record Type 04 1,2 L=2 Record Type (Always "04") 3,9 L=7 Process 10,19 L=10 Client 20,26 L=6 DOB 26,41 L=16 Filler Record Type 05 1,2 L=2 Record Type (Always "05") 3,16 L=14 Guarantor 17,22 L=6 Guar Account 23,23 L=1 Active Guar **There can be multiple 05 records, one for each Guarantor on the account**
and the single line flat file...
Code Snippet 01Site1 12345 0000098765 Y 02NY1155 12th Street 03ELL 0522071678 29 04TestingSmith,Paul071678 05Smith, Jane 445978N 05Smith, Julie 445989N 05Smith, Jenny 445915N 01Site2 12346 0000098766 N 02MN615 Woodland Ct 04InfoJones,Chris 012001 01Site3 12347 0000098767 Y 02IN89 Jade Street 03OWB 6429051282 25 04Screen New,Katie 879500
As you can see, each entry could have any number of records and multiples of some of the record types, with one exception, every entry must have a "01" record and can only have one "01" record. Oh, and each record has a length of 400.
I need to get this information into a SQL 2005 database so I can create a front end for accessing the data. Originally, I wanted one line for each account and have null values listed for entries that don't have a specific record. Now that I've looked at the data again, that doesn't look like a good idea. I think a better way to do it would be to create 5 different tables, one for each record type. However, records 2 through 5 don't have anything I can make a primary key. So here are my questions...
Is it possible to make 5 tables from this one file, one table for each of the record types?
If so, can I copy the Account number in record 01, position 13-19 in each of the subsequent record types (that way I could link the tables as needed)?
Can this be done using the SISS Import and Export Wizard to create the package? If not, I'm going to need some very basic step by step instructions on how to create the package.
Is SISS the best way to do this conversion or is there another program that would be better to use? I know this is a huge question and I appreciate the help of anyone who boldly decides to help me! Thank you in advance and I welcome anyone's suggestions!
Currently have a single hard coded file path to the SSRS config file which parses the file and provides the reporting services web service url. My question is how would i run this same query against 100s of servers that may or may not share the same file path as the one hard coded ?
Is there a way to query the registry to find the location of the config file of any server ? which could be on D, E, F, H, etc.
I know I can string together the address followed by "reports" and named instance if needed, but some instances may not have used the default virtual directory name (Reports).
Am I going about this the hard way ? Is there a location where the web service url exists in a table ? I could not locate anything in the Reporting service database. Basically need to inventory all of my reporting services url's.
How can I take this example Flat file and parse out each section to a new flat file? Each section starts with HD (header row)
http://www.webfound.net/flat_file_example.txt
e.g. an example output file based on above (cutting out the first section) would be:
http://www.webfound.net/flatfile_output.txt
Also, I'll need to grab a certain value in each header row (certain position in the 100 byte header row) to use that as part of the filename that's outputed. I assume it would be better to insert these rows into a temp table then somehow do a search on a specific position in the row...but that's impossible? The other route is to insert each row into a temp table separated out by fields but that is going to be too combursome because we have several formats to determine separation of fields based on the row type so I'd have to create many temp tables and many components in SSIS when all we want to do is again:
1) output each group (broken by each header row) into it's own txt file
2) use a field in the header row as part of the name of the output txt file (e.g. look at the first row, whcih is a header row in flat_file_example. txt. I want to grab the text 'AR10' and use that as part of the filename that I create
Any suggestions on how to approach this whole process in SSIS...the simplest approach that will work ?
I need to parse an regularly outputted rtf file and was wondering if it is possible in SSIS. I am trying to use the flat file connection manager to do this.
Now, I can't treat tab stops in an rtf like tab stops in a csv, since when you treat an rtf as a text file, you see the format code of the rtf. If I open the rtf in a text editor, the entire file is one line, with lines breaking with:
par}
Columns are tab delimited in the rtf, and they look like this when you treat the rtf as a text file.
plain abfs16f4cf0cb1
(or something like that, the word "tab" is the important part.)
So I use the "plain ab" part to delimit in SSIS, since that is consistent (planning to parse out all the garbage later on). The problem is, sometimes lines don't have a "city" and "state", so it "tabs" right over to the next field. So like this (looking in MS Word):
Phone <tab> City <tab> State <tab> Date <tab> Other fields..... 847-111-2222 <tab> Omaha <tab> NB <tab> 9/14/2007 <tab> 222-222-3333 <tab> 9/14/2007 <tab> 555-121-1212 <tab> Houston <tab> TX <tab> 9/14/2007 <tab>
Now, if you treat an RTF as a text file, it has only one "plain abfs16f4cf0cb1" after the phone number, so even for the missing line there is only one tab, not 3. This is because in the beginning of the row tabs for each row are defined like this:
tql x90 ql x840 ql....etc...
with "tql" and "tx" tags basically saying where all the tab stops are for that row. So for the row above with missing info, it lists fewer tab stops. So the "date" (and associated garbage) ends up under "City" for this row. All of the "Houston" row's data starts appearing in the sql server output table's 2nd last field, as you might expect.
Any suggestions how to pull this in in SSIS during the transformation? I could deal with it after I pull it in, I still have all the data. I'm thinking the logic to do this could be complicated though. I take the data out of the last two fields of the missing row into some other table, use UPDATES to shift the values 2 fields to the right, and then figure out a way to take the data I just put in a temp table back in, but it all sounds a bit complicated.
Let me know if this makes sense--I've almost got it going, I just need to sort this last bit out.
i am trying to read a qfx file from quicken. it looks like xml, but its not, but i cannot figure out how to grab what ive got to parse the line. i put this into a derived column, but its not getting it
because inside the data, it lools like that's what brackets a tranasction; the data looks like this and varies by trntype, but the columns are tagged like so
I have a tab delimited file with 122 columns. Can any one let me know if there is a better way of parsing/extracting few columns (say about 15) from the file and loading it into a table using SSIS.
Hello all, I have a question regarding importing text file data into SQL Server. I'm hoping someone can point me in the right direction, as my searches haven't turned up anything specific enough. I'm trying to parse a large (24MB) text file. It's a fixed-width file, with multiple columns. I need to parse this file, check if a record already exists, and then import the data into the database. But I don't need to insert every column. There's only a few columns from the file I need to insert. This parsing also needs to occur at regular intervals (daily). I looked at BULK INSERT, but I can't find an example that uses only some of the columns. Every example uses all columns, and the file is delimited, not fixed-width. Is there anything within SQL Server that can accomplish this? I haven't turned up anything that will solve my problem. The only other solution I can think of is an application that parses the file for me and inserts the data into the database. But can I schedule that application to run every night at midnight (for example) through SQL Server? I'm not too familiar with SQL Server, so I appreciate any help offered. Thanks,Jay
Summary A ABCD A Category MarketValue Margin A category1 1.0000000 1.000000 A category2 2.0000000 2.000000
H Totals Total Cash Net H 2.00000 200000 2000000
Another Summary B BCDE B Activity MarketValue Margin B activity1 3.00000 3.000000 B activity2 4.00000 4.000000
The items in blue are headers. I don't want to capture those. However, I want to capture all the data in black, and put it into 3 separate tables (or maybe the same table, under the appropriate column names)
This situation differs from anything I've done before in that you can't identify what row contains what data by what's in the row itself. That is, what's in the data rows is random and subject to change. So you can't search the row itself to determine which table it goes to.
However, if there's a way to capture all the rows after a certain header before the header changes again, that might work.
That is, get all rows between A Category MarketValue Margin and H Totals Total Cash Net and get all rows between H Totals Total Cash Net and Another Summary and get all rows after B Activity MarketValue Margin
The suggestion to do this is buried deep in one of my posts, however I still do not have a clear idea of how to do this.
I have a flat file which has several "bad rows" in it. Because file error redirection is buggy, I need a manual approach to get rid of these incomplete rows in my data file.
Phil, you suggested I read the file as one long string, then parse out the bad rows (using a script?).... however I have no idea as to how to actually do this.
I was wondering if it's possible to clarify the steps involved in doing this, or perhaps point me to an example I can look at, as I cannot seem to get around this problem on my own.
I have a website, where people upload tab delimited text files of their product inventories, which the site parses and inserts into a database table. Here's the catch: Instead of insisting that each user use a standardized format, each user can upload the file in whatever column order they want, they just have to let the site know through a GUI which column is in which order. And, they may upload columns that if not mapped, will be ignored. Right now, I am doing all of this in code and it runs slow, I was thinking of offloading this to either a stored procedure, ssis, or bulk upload. But, with the varying format of the uploaded text file, I am not sure how I could do that. Any suggestions? Thanks!
I have a CSV file with roughly 6 million rows. The file is unstructured; that is, some rows have 5 fields, others have 15, and there are as many 50 fields in one row.
I am using bulk insert to read the entire file into a table in database, with each row being a database record. With that, I have one column that contains a row of comma delimited fields. All fields are character string and I want to find a quick way of parsing each row and placing each comma-delimited value in a column. For example:
Column CSVString contains the a CSV row (I don't know how many filelds (no. of commas + 1) in the row, but if the row contains 10 fields, I need to populate columns C1-C10. If the row has 15 fields, I populate columns C1-C15.
How can I do this in a very efficient way? I tried CTE but performance was not very good.
I have a package in which there are only one Data flow Task and it has only three components. 1) Source , which is a SQL db 2) destination and 3) OLE DB Destination flat file Error output file. I want the error file to be created ONLY if there is any error while dumping the data into destination DB. But , the issue is, the error flat file is being created inspite of No error while dumping the data from Source to Destination.
Need to know how I can get the dynamic filename created in the FlatFile destination for insert into a package audit table?
Scenario: Have created a package that successfully outputs Dynamiclly named flat files { Format: C:Test’Comms_File_’ + ‘User::FileNumber’+’_’+Date +’.txt’
E.g.: Comms_File_1_20150724.txt, Comms_File_2_20150724.txt etc} using Foreach Loop Container :
* Enumerator Set to: “Foreach ADO Enumerator” with the ADO object source variable selected to identify how many total loop iterations there are i.e. Let’s say 4 thus 4 files to be created
*Variable Mappings : added the User::FileNumber – indicates which file number current loop iteration is i.e. 1,2,3,4
For the DataFlow task have a OLDBSource and a FlatFile Destination where Flat File ConnectionString is set up as:
I need find out the number of columns in flat file before i process that particular file.I have file name in @filename variable and file path is @filepath variable.But do not not that how i will check the column name in before i will process that file.
@filePath = C:DatabaseSourceFilesCAHCVSSourceFiles And i am using for each loop container to read the file one by one and put the file name in @filename variable.and my file name like
Now what i have to do is i need to make sure that ID,Name,City,County,Phone is there in flat file.if it is not there then i have to send mail to client saying that file is not valid.I need to also calculate the size of flat file.
What is the easiest way to accomplish this task with SSIS?
Basically I have a stored procedure that unions multiple queries between databases. I need to be able to export this to a text file on a daily basis and add a total records: row to the end of the text file.
Hello Experts, I am createing one task (user control) in SSIS. I have property grid in my GUI and 2 buttons (OK & Cancle). PropertyGrid has Properties like SourceConnection, OutputConnection etc....right now I am able to populate Connections in list box next to Source and Output Property.
Now my question to you guys is depending on Source Connection it should read that text file associated with connection manager. After validation it should pick header (first line of text file bases on record type) and write it into new file when task is executed. I have following code for your reference. Please let me know I am going in right direction or not.. What should go here ? ->Under Class A
In a foreachloop, I am inserting records into a flat file which is working fine. But the thing is that as the file grows, it takes longer for it to locate the EOF(End of File) of the flat file so as to insert the records.
I have around 70-100 lines written to the file at each loop and there are more than 20k records to be looped. wihich means that at the end I should be having 1400k - 20000k line in the text file.
One solution would be to insert the records at the start of the file itself so that it does not has to lookup the EOF each time before writting.
Another would be to generate separate files and then merge it.
Any idea how can this can be done?
Beside this I have to zip the file and then SFTP to a given address.
I am running my package in sql server 2012, in which i am giving network path for flat file destination. And its working fine. But if i give m local path, its giving me error " cannot open data file" ...
Here's a really annoying problem. Let's say you have a text file with 2 million rows.Delimiters all look good and rows are previewed well but the file has a missing row at say lin 1234567 - way deep in the file. When SSIS encounters the blank row, an error is raised and processing on the file STOPS! I verified this in by checking the SSIS log and have even developed an error routine to notify me via email when the error occurs (really cool if I do say so myself ). The main problem still remains - how to resume processing from the point of failure in the file? Any help is appreciated. Thanks.
How do I insert data from a flat file or .csv file into an existing SQL database???
Here what I've come up with thus far and I but it doesn't work. Can someone please help? Let me know if there is a better way to do this... Idealy I'd like to write straight to the sql database and skip the datset all together...
I have a package A which is copied from another existing package B as most of the data structure and ETL mappings are same.
What I need to change in Package A is to change the file in Flat File Connection Manager. I can change it in the conneciton manager editor. However, it is automatically changed back to the previous one everytime when I try to Save All or run the package.
I also tried to copy/paste this Flat File Connection Manager in the same package but samething happen. The package file is not set 'Read Only" so anything else can Saved well except for the File name in connection manager.
Is this a bug? It would be very appreciated if anyone can give me any idea about this.
How do I insert data from a flat file or .csv file into an existing SQL database???
Here what I've come up with thus far and I but it doesn't work. Can someone please help? Let me know if there is a better wway to do this... Idealy I'd like to write straight to the sql database and skip the datset all together...
