Backups From SQLcmd ??
Nov 9, 2006
I am working with SQL Express and found myself surprised when I tried to automate a backup... No Agent.
So I am trying to create a simple backup script to run from the command line and probably schedule through the scheduled task manager.
here is my problem. I get the following error :
Msg 2812, Level 16, State 62, Server FIREFLYSQLEXPRESS, Line 1
Could not find stored procedure 'B'.
Here is the batch file
sqlcmd -i c: emp estDBbackup.sql -o c: emp estoutput.txt -S FIREFLYSQLEXPRESS
And here is the sql input file :
BACKUP DATABASE [DNNDEV] TO DISK = 'C: emp estdnndev.bak' WITH NOFORMAT, NOINIT, NAME = 'dnndev-Full Database Backup', SKIP, NOREWIND, NOUNLOAD, STATS = 10;
If I put a USE statement in front of my backup statement - the error message changes to
Could not find stored procedure 'U'.
So it would appear to list the first character encountered.
As a sanity check I created a similar process which does a select * from a table and I do not get an error saying :Could not find stored procedure 'S'. - instead all is well and I get my output and no error
If I try the backup command in SQLCMD interactively it works.
so what the heck am I missing ?
Thank you for any help...
View 4 Replies
ADVERTISEMENT
Nov 15, 2015
The space allocated to the Log in question is 180 GB. During this time period I was running TLog backups every 5 minutes, yet the log continued to chew through to 80 GB used, even after the process was complete and a final TLog backup had been taken. It continued to stay very large until the Full backup was complete -- or something else that I'm unaware of completed. Like every other DBA I typically take a TLog backup to shrink the log, but what appeared to be the case here was the Full completed and it released the used log space. All said, will Transaction Log backups not free up the log during Full backups?
View 3 Replies
View Related
May 4, 2007
I cannot get SQLCMD to run. When I run it, it appears for a few seconds then dissappears. I tried running it in cmd and it says it cannot run because the default setting for SQL server does not allow remote connections. Please help.
View 11 Replies
View Related
May 2, 2008
When connecting to SQL using the SQLCMD
Is there a way to do a select and it output in DOS mode...
Even have the message return - completed just as if you were in sql query.
View 1 Replies
View Related
May 22, 2008
Hello,
Does anyone know how to execute a stored procedure in a SQLCMD script? Here is what I have so far and it doesn't seem to be working...
:r $(rootPath)"Script.sql"
GO
exec sp_Proc
GO
Also,
Is there a way that I can pass the $(rootpath) as a parameter in my stored proc?
Thanks!
View 3 Replies
View Related
Feb 21, 2008
I am trying to backup/restore a sql db using sqlcmd. My question is, the box that I am trying to run sqlcmd on does not have SQL server 2005 installed, can I just copy SQLCMD.exe to the box instead of Installing it? if so, are there any other files that I need to copy as well?
I have another instance where I was trying to backup/restore a 2000 sql db and all I did was copy the osql.exe and resource files to the box and was able to run this command with out installing SQL server 2000. So, did something change with SQL serve 2005?
Thanks for any suggestions
View 6 Replies
View Related
Aug 23, 2006
Hi,
Please can any one let me know jhow to use -y option with SQLCMD.
View 11 Replies
View Related
Jul 20, 2007
How can I use sqlcmd to execute a simple stored procedure, I dont need to pass parameters in or out, its just for backups.
Thanks
View 2 Replies
View Related
Mar 3, 2008
Greetings all!
i am using the follownig sqlcmd command to output some data :
sqlcmd -E -S myServermyInstance -s "," -W -d myDB -Q " set nocount on select ltrim('""' + cast(PersonId as varchar) +
'-' + cast(DatabaseId as varchar) + '""') as 'URN-DBID','""' + EmailAddress + '""' as EmailAddress from myDB.dbo.myTable where
DTS > dateadd(dd, -7, getdate()) set nocount off " > "\tfsvrCompanyDatabase DevelopmentTestReports"myRecords-20080303.txt
The output looks something like this :
URN-DBID,EmailAddress
--------,------------
"5-1","blahblah@HOTMAIL.COM"
"264541-1","blahblah@HOTMAIL.COM"
"1107457-1","blahblah@HOTMAIL.COM"
"6133752-1","blahblah@HOTMAIL.COM"
Is it possible to keep the headnigs but remove the dashed line?
Your help would be much appreciated.
View 5 Replies
View Related
Mar 3, 2008
Greetings all!
i am using the follownig sqlcmd command to output some data :
sqlcmd -E -S myServermyInstance -s "," -W -d myDB -Q " set nocount on select ltrim('""' + cast(PersonId as varchar) +
'-' + cast(DatabaseId as varchar) + '""') as 'URN-DBID','""' + EmailAddress + '""' as EmailAddress from myDB.dbo.myTable where
DTS > dateadd(dd, -7, getdate()) set nocount off " > "\mynetworkdrivemyCompanymyDatabase DevelopmentmyTestReports"myRecords-20080303.txt
The output looks something like this :
URN-DBID,EmailAddress
--------,------------
"5-1","blahblah@HOTMAIL.COM"
"264541-1","blahblah@HOTMAIL.COM"
"1107457-1","blahblah@HOTMAIL.COM"
"6133752-1","blahblah@HOTMAIL.COM"
Is it possible to keep the headnigs but remove the dashed line?
Your help would be much appreciated.
View 4 Replies
View Related
Mar 21, 2006
how can i change the view in sqlcmd?
such as changing the font or the window size so that a command such as sp_tables will list on one row rather than several. Also I would only like to see 10 records or so at the same time. Currently in default setting, if i run sp_tables I can really only view the last few records.
thanks!
View 1 Replies
View Related
Oct 8, 2006
Hi
I found it a bit annoying to type Go after some very simple query and I wonder is there a short cut to execute the query i type right after I press enter?
1> select * from Table
2> go <enter>
instead, how to you execute line 1 without entering go?
Thank you
View 7 Replies
View Related
Apr 14, 2008
Dear profetionlas:
I cannot run sqlcmd in my computer but i can connect to my SQL Server2005 through SSIS
This is the error I see .
Please give me some recommandation
C:Documents and Settings est>sqlcmd
HResult 0x2, Level 16, State 1
Named Pipes Provider: Could not open a connection to SQL Server [2].
Sqlcmd: Error: Microsoft SQL Native Client : An error has occurred while establi
shing a connection to the server. When connecting to SQL Server 2005, this failu
re may be caused by the fact that under the default settings SQL Server does not
allow remote connections..
Sqlcmd: Error: Microsoft SQL Native Client : Login timeout expired.
I would like also metion that
1)windows firewall is off
2)All SQL server Services are running
3)This is my default instance also I have another named instance in the server
View 4 Replies
View Related
Oct 9, 2006
Just installed SQL Server 2005 Express along with the Management Studio. The Management Studio, at least what I've seen so far, seems to work fine. But when I type "sqlcmd" at the command prompt, I get "sqlcmd is not a recognized internal or external command, operable program or batch file." What gives???
View 4 Replies
View Related
Mar 1, 2008
GreetingsI'm trying to follow the tutorial at http://www.asp.net/Guided%2DTour/s2.aspx Part way through the demo it asks me to run the following command as part of building a Demo web page access SQL dataC:Program FilesMicrosoft SQL Server90ToolsinnSQLCMD"
-S "machine-nameSqlExpress" I am then supposed to paste some script into that window, but cant get that far. The black Command window opens, but the SQL > prompt doesn't appear, and the window closes. I had previously installed a demo version of Web Developer Express from my Action Pack, on a SBS Server Premium 2003 R2, clean installation. When I got to the above step in the demo there was no ...90Toolsinn folder so, I uninstalled the Action Pack version and the versions of SQL server that looked like they did not belong to the original SBS Server installation. I then downloaded the version from Microsofts website, and selected .Net SP1 and SQL Server Express ( or lite or whatever it's called ) that were part of the install dialog box. When checking for updates, the .NET SP1 and Visual Studio SP1 initial failed. Rebooting installed .Net SP1, but I had to do a hard reboot as the installation still wasn't complete after 2 hours. I assumed it was hung. After restarting, I was able to go to MSUpdates and the installation was successful.Currently the add remove programs shows a ton of SQL stuff, ..I'm guessing we have version conflicts or something but I don't know.. Microsoft SQL Server 2005Microsoft SQL Server Desktop engine " Native Client " Setup Support files " VSS Writer Visual Studio seems to run okay, but I would like to be able to do SQL database part of the tutorial, since I don't know much about it as you can tell, and I would like to see it work with web sites. TimeTraveller
View 1 Replies
View Related
May 15, 2008
Hi !
I try to connect to a database on my localhost using sqlcmd. For the records: Remote connections are allowed ! I don't have any issues to establish a connection using SSMS.
S:DBWorkFolder>sqlcmd -U razorblade -P xxxxx -S localhostzen_dev4
This is what I get:
HResult 0xFFFFFFFF, Level 16, State 1
SQL Network Interfaces: Error Locating Server/Instance Specified [xFFFFFFFF].
Sqlcmd: Error: Microsoft SQL Native Client : An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections..
Sqlcmd: Error: Microsoft SQL Native Client : Login timeout expired.
Any help appreciated !
Thanks: Peter
View 1 Replies
View Related
Nov 22, 2007
The command below runs fine from within Management Studioexec sp_MSforeachtable @command1="exec sp_spaceused '?' "However, I'd like to run it via sqlcmd. I've tried variouscombinations of escaping the doulbe and single quotes but withoutsuccess.sqlcmd -E -Q "sp_MSforeachtable @command1="exec sp_spaceused '?'""Sqlcmd: 'exec sp_spaceused '?'""': Unexpected argument. Enter '-?'for help.Any ideas?Thanks,M
View 2 Replies
View Related
May 4, 2007
Dear all,
I'm having a problem with configure Mirroring. When I use graphical inteface to config the Mirror, it is ok. But when using sql, there are an error that I can not understand.
Here is the code:
ETVAR PrincipalServer DEMOPARTNERA
ETVAR MirrorServer DEMOPARTNERB
ETVAR WitnessServer DEMOWITNESS
ETVAR Database2Mirror AdventureWorksDW
go
N ERROR EXIT
go
:CONNECT $(PrincipalServer)
-- Mirroring ONLY supports the FULL Recovery Model
ALTER DATABASE $(Database2Mirror)
SET RECOVERY FULL
go
USE $(Database2Mirror)
go
CREATE ENDPOINT Mirroring
STATE=STARTED
AS TCP (LISTENER_PORT=5022)
FOR DATABASE_MIRRORING (ROLE=PARTNER)
GO
:CONNECT $(MirrorServer)
CREATE ENDPOINT Mirroring
STATE=STARTED
AS TCP (LISTENER_PORT=5023)
FOR DATABASE_MIRRORING (ROLE=PARTNER)
GO
:CONNECT $(WitnessServer)
CREATE ENDPOINT Mirroring
STATE=STARTED
AS TCP (LISTENER_PORT=5024)
FOR DATABASE_MIRRORING (ROLE=WITNESS)
GO
:CONNECT $(PrincipalServer)
BACKUP DATABASE $(Database2Mirror)
TO DISK = 'C:TechReady$(Database2Mirror).bak'
WITH INIT
GO
:CONNECT $(MirrorServer)
DECLARE @InstanceName sql_variant,
@InstanceDir sql_variant,
@SQLDataRoot nvarchar(512),
@ExecStr nvarchar(max)
SELECT @InstanceName = ISNULL(SERVERPROPERTY('InstanceName'), 'MSSQLServer')
EXECUTE master.dbo.xp_regread 'HKEY_LOCAL_MACHINE',
'SOFTWAREMicrosoftMicrosoft SQL ServerInstance NamesSQL',
@InstanceName, @InstanceDir OUTPUT
SELECT @ExecStr = 'EXECUTE master.dbo.xp_regread '
+ '''HKEY_LOCAL_MACHINE'', '
+ '''SOFTWAREMicrosoftMicrosoft SQL Server'
+ convert(varchar, @InstanceDir)
+ 'Setup'', ''SQLDataRoot'', @SQLDataRoot OUTPUT'
EXEC master.dbo.sp_executesql @ExecStr
, N'@SQLDataRoot nvarchar(512) OUTPUT'
, @SQLDataRoot OUTPUT
IF @SQLDataRoot IS NULL
BEGIN
RAISERROR ('Did not find the correct SQL Data Root Directory. Cannot proceed. Databases backed up but not yet restored.', 16, -1)
END
CREATE TABLE #BackupFileList
( LogicalName sysname NULL
, PhysicalName sysname NULL
, [Type] char(1)
, FileGroupName sysname NULL
, Size bigint
, MaxSize bigint
, FileId smallint
, CreateLSN numeric(25,0)
, DropLSN numeric(25,0)
, UniqueId uniqueidentifier
, ReadOnlyLSN numeric(25,0)
, ReadWriteLSN numeric(25,0)
, BackupSizeInBytes bigint
, SourceBlockSize bigint
, FileGroupId smallint
, LogGroupGUID uniqueidentifier
, DifferentialBaseLSN numeric(25,0)
, DifferentialBaseGUID uniqueidentifier
, IsReadOnly bit
, IsPresent bit
)
INSERT #BackupFileList
EXEC('LOAD FILELISTONLY FROM DISK = ''C:TechReady$(Database2Mirror).bak''')
UPDATE #BackupFileList
SET PhysicalName
= @SQLDataRoot
+ N'Data'
+ REVERSE(SUBSTRING(REVERSE(PhysicalName)
, 1, PATINDEX('%\%', REVERSE(PhysicalName)) -1))
DECLARE @LogicalName sysname
, @PhysicalName sysname
DECLARE FileListCursor CURSOR FAST_FORWARD FOR
SELECT LogicalName, PhysicalName
FROM #BackupFileList
OPEN FileListCursor
FETCH NEXT FROM FileListCursor INTO @LogicalName, @PhysicalName
SELECT @ExecStr = N'RESTORE DATABASE $(Database2Mirror)' +
N' FROM DISK = ''c:TechReady$(Database2Mirror).bak''' +
N' WITH MOVE ''' + @LogicalName + N''' TO ''' + @PhysicalName + N''''
FETCH NEXT FROM FileListCursor INTO @LogicalName, @PhysicalName
WHILE @@FETCH_STATUS <> -1
BEGIN
SELECT @ExecStr = @ExecStr + N', MOVE ''' + @LogicalName
+ ''' TO ''' + @PhysicalName + ''''
FETCH NEXT FROM FileListCursor INTO @LogicalName, @PhysicalName
END
-- NORECOVERY is required for Database Mirroring, replace is not.
-- Replace is used here solely to allow repetitive use of this script.
SELECT @ExecStr = @ExecStr + N' , NORECOVERY, REPLACE'
-- Useful for testing
-- Only return the string and then comment out the EXEC line below.
-- SELECT @ExecStr
EXEC (@ExecStr)
DEALLOCATE FileListCursor
GO
:CONNECT $(PrincipalServer)
SELECT DATABASEPROPERTYEX(N'$(Database2Mirror)', N'Status') -- Returns ONLINE
SELECT db_name(sd.[database_id]) AS [Database Name],
sd.mirroring_guid,
sd.mirroring_state,
sd.mirroring_state_desc,
sd.mirroring_partner_name,
sd.mirroring_witness_name,
sd.mirroring_witness_state,
sd.mirroring_witness_state_desc,
sd.mirroring_role,
sd.mirroring_role_desc,
sd.mirroring_role_sequence,
sd.mirroring_safety_level,
sd.mirroring_safety_level_desc,
sd.mirroring_safety_sequence,
sd.mirroring_failover_lsn
FROM sys.database_mirroring AS sd
WHERE sd.[database_id] = db_id(N'$(Database2Mirror)')
go
:CONNECT $(MirrorServer)
SELECT DATABASEPROPERTYEX(N'$(Database2Mirror)', N'Status') -- Returns RESTORING
SELECT db_name(sd.[database_id]) AS [Database Name],
sd.mirroring_guid,
sd.mirroring_state,
sd.mirroring_state_desc,
sd.mirroring_partner_name,
sd.mirroring_witness_name,
sd.mirroring_witness_state,
sd.mirroring_witness_state_desc,
sd.mirroring_role,
sd.mirroring_role_desc,
sd.mirroring_role_sequence,
sd.mirroring_safety_level,
sd.mirroring_safety_level_desc,
sd.mirroring_safety_sequence,
sd.mirroring_failover_lsn
FROM sys.database_mirroring AS sd
WHERE sd.[database_id] = db_id(N'$(Database2Mirror)')
go
:CONNECT $(MirrorServer)
ALTER DATABASE $(Database2Mirror)
SET PARTNER = 'TCP://DEMO:5023'
-- SET PARTNER = 'TCP://Server.fully.qualified.dns.name:5091'
-- SET PARTNER = 'TCP://SQLIDW15HA.redmond.corp.microsoft.com:5091'
GO
:CONNECT $(PrincipalServer)
ALTER DATABASE $(Database2Mirror)
SET PARTNER = 'TCP://DEMO:5022'
-- SET PARTNER = 'TCP://Server.fully.qualified.dns.name:5092'
-- SET PARTNER = 'TCP://SQLIDW15HA.redmond.corp.microsoft.com:5092'
GO
ALTER DATABASE $(Database2Mirror)
SET WITNESS = 'TCP://DEMO:5024'
-- SET WITNESS = 'TCP://Server.fully.qualified.dns.name:5090'
-- SET WITNESS = 'TCP://SQLIDW15HA.redmond.corp.microsoft.com:5090'
GO
SELECT db_name(sd.[database_id]) AS [Database Name],
sd.mirroring_guid,
sd.mirroring_state,
sd.mirroring_state_desc,
sd.mirroring_partner_name,
sd.mirroring_witness_name,
sd.mirroring_witness_state,
sd.mirroring_witness_state_desc,
sd.mirroring_role,
sd.mirroring_role_desc,
sd.mirroring_role_sequence,
sd.mirroring_safety_level,
sd.mirroring_safety_level_desc,
sd.mirroring_safety_sequence,
sd.mirroring_failover_lsn
FROM sys.database_mirroring AS sd
WHERE sd.[database_id] = db_id(N'$(Database2Mirror)')
and the log is:
Msg 1452, Level 16, State 6, Line 3
The partner server instance name must be distinct from the server instance that manages the database. The ALTER DATABASE SET PARTNER command failed.
** An error was encountered during execution of batch. Exiting.
I Think the error is begin at:
ALTER DATABASE $(Database2Mirror)
SET PARTNER = 'TCP://DEMO:5023'
-- SET PARTNER = 'TCP://Server.fully.qualified.dns.name:5091'
-- SET PARTNER = 'TCP://SQLIDW15HA.redmond.corp.microsoft.com:5091'
GO
:CONNECT $(PrincipalServer)
ALTER DATABASE $(Database2Mirror)
SET PARTNER = 'TCP://DEMO:5022'
-- SET PARTNER = 'TCP://Server.fully.qualified.dns.name:5092'
-- SET PARTNER = 'TCP://SQLIDW15HA.redmond.corp.microsoft.com:5092'
GO
ALTER DATABASE $(Database2Mirror)
SET WITNESS = 'TCP://DEMO:5024'
-- SET WITNESS = 'TCP://Server.fully.qualified.dns.name:5090'
-- SET WITNESS = 'TCP://SQLIDW15HA.redmond.corp.microsoft.com:5090'
GO
but I can not find out the solution. Turn back to grafical interface, everything is done
Please help!
View 6 Replies
View Related
Jun 19, 2007
I can Add a connection to the database in VisualStudio 2005 in the Solution Explorer and access the database. Connection string copied from VS "Data Source=.SQLEXPRESS;AttachDbFilename=C:TempMyDB.mdf;Integrated Security=True;Connect Timeout=30;User Instance=True".
If i start the command prompt and type:
sqlcmd -SlocalhostSQLEXPRESS -E -d c: empMyDB.mdf
I get the error "Login failed for user 'MyDomainPer'"
As I see it integrated authentication with the same user is used in both cases so they should give the same result. What am I doing wrong?
View 3 Replies
View Related
May 24, 2008
hi,
i am not sure if this forum is right place to ask this question..
i am trying right a dos batch file to do setup of sql commands run by sqlcmd , run some dos commands etc
net start mssql$server
sqlcmd -E .....
net stop mssql$server...
sqlcmd -E ....
in unix you can run isql with the sql commands place inside..
isql -Uuser -S server <<EOF
select 1
select 2
go
EOF
you can put above in a shell and it will run.
i am trying to do similar stuff in windows for sqlcmd.. how can i do it
only option i have is to create lot of .sql files and
run with -i option on sqlcmd..
can some body let me know how to do a inline commands in dos?
thx
AK
View 1 Replies
View Related
Dec 18, 2006
At the end of my rope here ... I was using SQL Express 2005 without trouble, until one day I couldn't access my database. I spent a day hunting down the issue without success. I uninstalled and reinstalled SQL Server many times, each time hoping it would somehow help ...
I can access SQL Server just fine through SQL Server Management Studio Express. I can get in by typing "sqlcmd -S {my machine name}SQLEXPRESS". However, I am working on a FoxPro application, and I cannot connect using FoxPro. It doesn't even seem to recognize the existence of SQL Server on the machine. Also, when I log in using sqlcmd, and type ":serverlist", I would expect my SQLEXPRESS instance to show up. It doesn't - the list of servers is empty. I suspect this is the problem, but have no idea what may be causing it.
Cumulatively, I've probably spent 3 work days trying to figure this out. Does anyone have any pointers or ideas that might help me figure out why ":serverlist" doesn't list my machineSQLEXPRESS, even though I can log in fine using Management Studio? Any help would be very much appreciated. Thank you,
matt
View 3 Replies
View Related
Feb 7, 2008
I have a SQL server 2000 box. I saw a post some time ago in MSDN Forums that the sqlcmd utility could be used on SQL Server 2000 as well. However, when I tried to install sqlcmd using file SQLServer2005_SQLCMD.msi downloaded from Microsoft, I got following error:
Setup is missing prerequisites:- SQL Native Client
Does this mean that I need to install SQL 2005 Client? How do I make sqlcmd work on a SQL Server 2005 box?
Please advise. Thanks.
Jim
View 3 Replies
View Related
Apr 20, 2006
As a complete beginner regarding SQL Server, I installed SQLExpress and lots of other things Microsoft told me to (without understanding why) accepting all the defaults offered.
I can make a connection to the server with "SQL Server Management Studio Express", create a database and add one two tables and views.
But all other things I've tried seem to go wrong without me having the slightest idea why, e.g.:
% SQLCMD.EXE -S swansqlexpress
HResult 0xFFFFFFFF, Level 16, State 1
SQL Network Interfaces: Error getting enabled protocols list from registry [xFFFFFFFF].
The above for instance when the protocol "Shared memory is enabled". If any combination of the other protocols are enabled, then I get a different error message.
I also cannot use the ODBC Management Tools to define a DSN connecting to SQLExpress ("Server does not exist or connection refused).
What I really want to do is to import data, using ODBC, from a different RDBMS into SQLExpress. Before writing my own scripts to do this, I had hoped that there would have been some GUI interface to SQLExpress with a nice little button saying "import external data". Is their such a beast?
Malcolm Agnew
View 1 Replies
View Related
Mar 16, 2006
Hello,
I am using SQL Server 2005 Express. I need to run a transact-sql script file to update the database. I am getting a "Login Failed" error when I use the SQLCMD utility. I use Windows Authentication.
Here is the command I use:
sqlcmd -S .SQLEXPRESS -d C:Progra~1MyProgramDataMyData.MDF -i MyUpg.SQL
Here is the message I am getting:
Msg 4060, Level 11, State 1, Server VAIOSQLEXPRESS, Line 1
Cannot open database "C:Progra~1 MyProgram Data MyData.MDF" requested by the login.
The login failed.
Msg 18456, Level 14, State 1, Server VAIOSQLEXPRESS, Line 1
Login failed for user 'VAIOUser Name€™.
Actually, it seems to work on my development PC, but have problem when using on a customer's machine where the product has been installed.
Any help will be appreciated.
Dots
View 7 Replies
View Related
Jun 20, 2007
Hi, can we use sqlcmd.exe (successsor to osql) to run sql scripts against a compact edition database? Would like to use the output from Visual Studio Team Edition for Software Professionals to build the database structure on compact edition database.
thanks,
dan
View 4 Replies
View Related
Jan 26, 2006
SQLCMD works in the Studio if SQLCMD Mode option is chosen.
OSQL and SQLCMD does not work from commandline and produces this constant burnt in message.
Sqlcmd:Error:Microsoft SQL Native Client:Login timeout expired.
Cleint and Server have the same set of protocols
Studio has been added to the list of those permitted by Firewall
Tried to connect through tcp, lpc
Remote has been enabled.
SQLNativeClient does not have a property or method by name 'timeout'.
Let me know if something else is needed?
View 3 Replies
View Related
Jun 7, 2006
Are the extended command always executed even if it is contained within an IF statement???
I created test.sql script as follows:
if '$(CreateA)' = 'Y'
begin
:out $(myDir)testY.log
print 'CreateA is yes'
end
else
begin
:out $(myDir)testN.log
print 'CreateA is no'
end
At the command line prompt enter:
sqlcmd -i test.sql -v CreateA="Y" MyDir="C:Temp"
I expected the file C:Temp estY.log to be created with the line "CreateA is yes", which occurred successfully. However, C:Temp estN.log was created as well, but it was empty.
I deleted the log files and executed the following sqlcmd statement:
sqlcmd -i test.sql -v CreateA="N" MyDir="C:Temp"
The C:Temp estN.log was created with the line "CreateA is no", but C:Temp estY.log was also created.
Is there any way to conditionally execute a sqlcmd extended commands?
Thanks!
N Camp
View 3 Replies
View Related
Jul 12, 2006
Is it possible to restart the Sql Express engine from the sqlcmd utility?
Thanks
View 1 Replies
View Related
Feb 26, 2007
I have installed SQL Express 2005 on a machine and I am trying to run a script file via SQLCMD from my application. I keep getting an error stating that SQLCMD can not connect to the server. Remote connections are enabled for both tcp/ip and named pipes. Sql Browser Service is enabled and running.
I am calling the script like so
sqlcmd -E -S TESTPLATFORMSQLEXPRESS -i "C:Program FilesADMS_TrialCREATE_DATABASE.sql" -o C:Error.txt
This is the error message
HResult 0x2, Level 16, State 1
Named Pipes Provider: Could not open a connection to SQL Server [2].
Sqlcmd: Error: Microsoft SQL Native Client : An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections..
Sqlcmd: Error: Microsoft SQL Native Client : Login timeout expired.
I can open Management studio and run the script and it works perfectly so I don't really know what is going on. Thanks for any help.
View 3 Replies
View Related
Jul 17, 2007
Hi I am running some scripts in files using sqlcmd via a SQL Server Agent job. If sqlcmd generates an error (for example if it is unable to connect) then the job fails. However, if the T-SQL within the script is invalid (syntax, name resolution etc etc) the job completes reporting success. If sqlcmd is invoked directly via the query window then no error is raised however there is a result set returned reporting the error. Anyone know why and whether is it possible to get the error to be recognised by the job? invalid_sql.sql--The below is not actually valid SQL.do SOME stuff, innit! sqlcmdEXEC master.dbo.xp_cmdshell "sqlcmd -S my_server -i C:invalid_sql.sql" Cheers
View 2 Replies
View Related
Apr 7, 2008
hello,
I am new to SQL sever and would like to connect to a particular database on the server using SQL. I have looked at various SQL sites with how to and none mention where I can locate the Input File name.
View 6 Replies
View Related
Dec 4, 2006
Hey guys i have installed SQL Server Express and getting a problem. Every time I use the runcommand and enter sqlcmd. It opens the window but then I cannot enter any information into it. And after a while the window just closes.
Anyone know the reason for this?
Dallr
View 3 Replies
View Related
Aug 10, 2006
Hi,I'm trying to add a column to a table, then update that column with aquery. This is all within a single batch. Sqlcmd gives me an error onthe update, saying "invalid column xxx", because it doesn't know thecolumn got added. We used to get around this in "osql" by using theEXECUTE command, like: EXEC ("ALTER TABLE tbl ADD newfield varchar(255)not null default ' '")However, it looks like sqlcmd actually checks each query within thescript before it starts running, and throws the error because the fieldisn't there at the time.If need be I can just do a SELECT INTO and add the column there, butit's a pain in the butt and I'm moving a LOT of data just to do what Iwant. And no, I can't go back to where the table is created and addthe column. Does anyone have any suggestions? TIA!- Jeff
View 2 Replies
View Related
