Hello,
Basically i want to have a stored procedute which will do an insert statement if the record is not in the table and update if it exists.
The Id is not autonumber, so if the record doesn't exists the sp should return the last id+1 to use it for the new record.
Is there any example i can see, or somebody can help me with that?
Thanks a lot.
I have to control my business rules in a Instead of Insert, Update Trigger.
Since the Control Flow is quite complicated I wanted to break it into stored procedures that get called from within the trigger.
I know that Insert Statements embedded in a Instead of Trigger do not execute the Insert of the trigger you are calling.
But... If I embed stored procedures that handle my inserts in the Instead of Insert trigger call the trigger and put in a endless loop or are the stored procedure inserts treated the same as trigger embedded inserts.
Hi !
I have trying to do an insert with a subroutine that calls a stored procedure, but it doesn’ t run. The page loads properly but nothing is inserted in the table of the database, no errors appears after submit the form.
<asp:Button id="SubmitButton" OnClick="Send_data" Text="Submit" runat="server"/>
Here is the code:
Sub Send_data(Sender As Object, E As EventArgs)
Dim CmdInsert As New SqlCommand("new_user1", strConnection)
CmdInsert.CommandType = CommandType.StoredProcedure
Dim InsertForm As New SqlDataAdapter()
InsertForm.InsertCommand = CmdInsert
CmdInsert.Parameters.Add(New SqlParameter("@RETURN_VALUE", SqlDbType.bigint, 8, "User_id"))
CmdInsert.Parameters("@RETURN_VALUE").Direction = ParameterDirection.ReturnValue
CmdInsert.Parameters.Add(New SqlParameter("@e_mail", SqlDbType.varchar, 50, "e_mail"))
CmdInsert.Parameters("@e_mail").Value = mail.Text()
End Sub
What it lacks?
I'm doing this more as a learning exercise than anything else. I want to write a stored procedure that I will pass a key to it and it will look in the database to see if a row exists for that key. If it does, then it needs to update the row on the DB, if not, then it needs to insert a new row using the key as an indexed key field on the database.for starters can this even be done with a stored procedure?if so, can someone provide some guidance as to how?thanks in advance,Burr
View 5 Replies View RelatedI am trying to take some SQL queries written by Visual Studio, one insert and one update and combine them into a single stored procedure. The insert procedure should be included in the update procedure and a check should be done for an existing record based upon the primary key. If it exist, an update command should be performed, else an insert. I also need to wrap the procedure in a transaction and rollback if any errors have occurred, else commit the transaction. If I have the following Insert and Update statements, can anyone help me write the stored procedure I need? Again, the current statements were automatically created and could be modified as needed.
INSERT INTO tblClub(ClubPKID, ClubName) VALUES (@ClubPKID, @ClubName); SELECT ClubPKID, ClubName FROM tblClub WHERE (ClubPKID = @@IDENTITY)
UPDATE tblClub SET ClubPKID = @ClubPKID, ClubName = @ClubName WHERE (ClubPKID = @Original_ClubPKID) AND (ClubName = @ClubName); SELECT ClubPKID, ClubName FROM tblClub WHERE (ClubPKID = @ClubPKID)
Thanks!
Hi:
I am trying to write a stored procedure that when passed a name, value it will
1. update the record if the name exists
2. create a new record if it doesnt
how would i do this?
HI,
I€™m trying to do a Stored Procedure (SP) that stores data from a form in ASP.NET.
If the record does not exist, it will create a new record first.
This is my first SP, so if best practise is done another way, I would like to hear about it.
Code:
Code Snippet
CREATE PROCEDURE dbo.StorUserRecord
/* some of these are for future use */
@UpdateMetode Int,
@UserIndex Int,
@UserFirstName NVarChar,
@UserLastName NVarChar,
@UserPassword NVarChar,
@UserPrivateMail NVarChar,
@UserCompanyMail NVarChar,
@UserTitle Int,
@UserSecLevel NVarChar,
@UserAddressLine1 NVarChar,
@UserAddressLine2 NVarChar,
@UserZipCode Int,
@UserPrivateMobilNumber NVarChar,
@UserCompanyMobilNumber NVarChar,
@UserHomeNumber NVarChar,
@UserCompanyDirectNumber NVarChar,
@UserCPR NVarChar,
@UserWorkerID NVarChar,
@UserDepartment Int,
@UserActive Bit,
@UserAccess Bit,
@UserDeleted Bit
AS
BEGIN
DECLARE @UseThisUserIndex Int;
IF NOT @UserIndex > 0
/* Create new record and return the "auto id" from UserIndex */
BEGIN
INSERT INTO [User] (UserFirstName) VALUES (@UserFirstName)
OUTPUT INSERTED.UserIndex
INTO @UseThisUserIndex
GO
END
ELSE
/* Use the "auto id" from the @UserIndex */
BEGIN
@UseThisUserIndex = @UserIndex
END
END
RETURN
I'm getting this error:
Msg 102, Level 15, State 1, Procedure StorUserRecord, Line 33
Incorrect syntax near 'OUTPUT'.
Msg 156, Level 15, State 1, Line 2
Incorrect syntax near the keyword 'ELSE'.
How could I possibly write a SP for Insert, Update and Delete for the below tables under this condition. On some conditions they need to be queried, initially for Insert, first the data should be inserted to PROFILES table and then to ROLES table. When inserting, if an entry is new then it should be added to both the tables. Sometimes when I make an entry which is already present in PROFILES table, then in this case the value should be added to the ROLES table. And a delete query to delete rows from both the table.
CREATE TABLE PROFILES(
USER_ID varchar(20) UNIQUE NOT NULL,
Name varchar(40) NULL,
Address varchar(25) NULL
[code]...
Hi all,can somebody help to write this stored procedure Table1 Table2LogID MigIDUserMove LogIDUserNew Domain User The two tables are inner join with LogID.If in Table2 LogID=NULL then create new dataset in Table1 (INSERT)and then Update LogID in Table2IF in Table2 LogID= 2 (or something else) then update the dataset in Table1 with the same LogID Thanks
View 1 Replies View Relatedany stored procedure guru's around ?
I'm going nuts around here.
ok basically I've create a multilangual website using global en local
resources for the static parts and a DB for the dynamic part.
I'm using the PROFILE option in asp.net 2.0 to store the language preference of visitors. It's working perfectly.
but Now I have some problems trying to get the right inserts.
basically I have designed my db based on this article:
http://www.codeproject.com/aspnet/LocalizedSamplePart2.asp?print=true
more specifically:
http://www.codeproject.com/aspnet/LocalizedSamplePart2/normalizedSchema.gif
ok now let's take the example of Categorie, Categorie_Local, and Culture
I basically want to create an insert that will let me insert categories into my database with the 2 language:
eg.
in categorie I have ID's 1 & 2
in culture I have:
ID: 1
culture: en-US
ID 2
culture: fr-Be
now the insert should create into Categorie_Local:
cat_id culture_id name
1 1 a category
1 2 une categorie
and so on...
I think this thing is only do-able with a stored procedure because:
1. when creating a new categorie, a new ID has to be entered into Categorie table
2. into the Categorie_local I need 2 rows inserted with the 2 values for 2 different cultures...
any idea on how to do this right ?
I'm a newbie with ms sql and stored procedures :s
help would be very very appreciated!
thanks a lot
I have Table Staffsubjects with columns and Values
      Â
Guid  AcademyId  StaffId  ClassId  SegmentId  SubjectId  Status
 1    500    101     007   101    555      1
 2    500    101     007   101    201      0
 3    500    22     008   105    555      1
I need to do 3 scenarios in this table.
1.First i need to update the row if the status column is 0 to 1
2.Need to insert the row IF SegmentId=@SegmentId and SubjectId<>@SubjectId and StaffId=@StaffId
3.Need to insert the row IF StaffId<>@StaffId And ClassId=@ClassId and  SegmentId<>@SegmentId and  SubjectId<>@SubjectId
I have wrote the stored procedure to do this, But the problem is If do the update, It is reflecting in the database by changing 0 to 1. But it shows error like cannot insert the duplicate
Here is the stored Procedure what i have wrote
ALTER PROCEDURE [dbo].[InsertAssignTeacherToSubjects]
@AcademyId uniqueidentifier,
@StaffId uniqueidentifier,
@ClassId uniqueidentifier,
@SegmentId uniqueidentifier,
@SubjectId uniqueidentifier
[Code] .....
I have the following stored procedure, to insert or update a record and return the id field, however the procedure returns two results sets, one empty if it's a new record - is there a way to supress the empty results set?
ALTER PROCEDURE [dbo].[AddNode]
@Name VARCHAR(15),
@Thumbprint VARCHAR(40),
@new_identity [uniqueidentifier] = NULL OUTPUT
AS
BEGIN
UPDATE dbo.NODES
[Code] ....
Hi all,
I have 2 sets of sql code in my SQL Server Management Stidio Express (SSMSE):
(1) /////--spTopSixAnalytes.sql--///
USE ssmsExpressDB
GO
CREATE Procedure [dbo].[spTopSixAnalytes]
AS
SET ROWCOUNT 6
SELECT Labtests.Result AS TopSixAnalytes, LabTests.Unit, LabTests.AnalyteName
FROM LabTests
ORDER BY LabTests.Result DESC
GO
(2) /////--spTopSixAnalytesEXEC.sql--//////////////
USE ssmsExpressDB
GO
EXEC spTopSixAnalytes
GO
I executed them and got the following results in SSMSE:
TopSixAnalytes Unit AnalyteName
1 222.10 ug/Kg Acetone
2 220.30 ug/Kg Acetone
3 211.90 ug/Kg Acetone
4 140.30 ug/L Acetone
5 120.70 ug/L Acetone
6 90.70 ug/L Acetone
/////////////////////////////////////////////////////////////////////////////////////////////
Now, I try to use this Stored Procedure in my ADO.NET-VB 2005 Express programming:
//////////////////--spTopSixAnalytes.vb--///////////
Public Class Form1
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim sqlConnection As SqlConnection = New SqlConnection("Data Source = .SQLEXPRESS; Integrated Security = SSPI; Initial Catalog = ssmsExpressDB;")
Dim sqlDataAdapter As SqlDataAdapter = New SqlDataAdaptor("[spTopSixAnalytes]", sqlConnection)
sqlDataAdapter.SelectCommand.Command.Type = CommandType.StoredProcedure
'Pass the name of the DataSet through the overloaded contructor
'of the DataSet class.
Dim dataSet As DataSet ("ssmsExpressDB")
sqlConnection.Open()
sqlDataAdapter.Fill(DataSet)
sqlConnection.Close()
End Sub
End Class
///////////////////////////////////////////////////////////////////////////////////////////
I executed the above code and I got the following 4 errors:
Error #1: Type 'SqlConnection' is not defined (in Form1.vb)
Error #2: Type 'SqlDataAdapter' is not defined (in Form1.vb)
Error #3: Array bounds cannot appear in type specifiers (in Form1.vb)
Error #4: 'DataSet' is not a type and cannot be used as an expression (in Form1)
Please help and advise.
Thanks in advance,
Scott Chang
More Information for you to know:
I have the "ssmsExpressDB" database in the Database Expolorer of VB 2005 Express. But I do not know how to get the SqlConnection and the SqlDataAdapter into the Form1. I do not know how to get the Fill Method implemented properly.
I try to learn "Working with SELECT Statement in a Stored Procedure" for printing the 6 rows that are selected - they are not parameterized.
All:
I have created a stored procedure on SQL server that does an Insert else Update to a table. The SP starts be doing "IF NOT EXISTS" check at the top to determine if it should be an insert or an update.
When i run the stored procedure directly on SQL server (Query Analyzer) it works fine. It updates when I pass in an existing ID#, and does an insert when I pass in a NULL to the ID#.
When i run the exact same logic from my aspx.vb code it keeps inserting the data everytime! I have debugged the code several times and all the parameters are getting passed in as they should be? Can anyone help, or have any ideas what could be happening?
Here is the basic shell of my SP:
CREATE PROCEDURE [dbo].[spHeader_InsertUpdate]
@FID int = null OUTPUT,@FLD1 varchar(50),@FLD2 smalldatetime,@FLD3 smalldatetime,@FLD4 smalldatetime
AS
Declare @rtncode int
IF NOT EXISTS(select * from HeaderTable where FormID=@FID)
Begin begin transaction
--Insert record Insert into HeaderTable (FLD1, FLD2, FLD3, FLD4) Values (@FLD1, @FLD2, @FLD3,@FLD4) SET @FID = SCOPE_IDENTITY(); --Check for error if @@error <> 0 begin rollback transaction select @rtncode = 0 return @rtncode end else begin commit transaction select @rtncode = 1 return @rtncode end endELSE
Begin begin transaction
--Update record Update HeaderTable SET FLD2=@FLD2, FLD3=@FLD3, FLD4=@FLD4 where FormID=@FID;
--Check for error if @@error <> 0 begin rollback transaction select @rtncode = 0 return @rtncode end else begin commit transaction select @rtncode = 2 return @rtncode end
End---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Thanks,
Blue.
Hi All,
As known its recommended to use stored procedures when executing on database for perfermance issue. I am thinking to create 4 stored procedures on my database (spSelectQuery, spInsertQuery, spUpdateQuery, spDeleteQuery)
that accept any query and execute it and return the result, rather than having a number of stored procedures for all tables? create PROCEDURE spSelectQuery
(
@select_query nvarchar(500)
)
as
begin
exec sp_executesql @select_query, N'@col_val varchar(50) out', @col_val out
end
Is this a good approach design, or its bad???
Thanks all
I have Table Staffsubjects
with columns and Values
Guid AcademyId StaffId ClassId SegmentId SubjectId Status
1 500 101 007 101 555 1
2 500 101 007 101 201 0
3 500 22 008 105 555 1
I need to do 3 scenarios in this table.
1.First i need to update the row if the status column is 0 to 1
2.Need to insert the row IF SegmentId=@SegmentId and SubjectId<>@SubjectId and StaffId=@StaffId
3.Need to insert the row IF StaffId<>@StaffId And ClassId=@ClassId and SegmentId<>@SegmentId and SubjectId<>@SubjectId
I have wrote the stored procedure to do this. But the problem is If do the update. It is reflecting in the database by changing 0 to 1. But it shows error like cannot insert the duplicate
Here is the stored Procedure what i have wrote
ALTER PROCEDURE [dbo].[InsertAssignTeacherToSubjects]
@AcademyId uniqueidentifier,
@StaffId uniqueidentifier,
@ClassId uniqueidentifier,
@SegmentId uniqueidentifier,
@SubjectId uniqueidentifier
[Code] ....
Hi all - I'm trying to optimized my stored procedures to be a bit easier to maintain, and am sure this is possible, not am very unclear on the syntax to doing this correctly. For example, I have a simple stored procedure that takes a string as a parameter, and returns its resolved index that corresponds to a record in my database. ie
exec dbo.DeriveStatusID 'Created'
returns an int value as 1
(performed by "SELECT statusID FROM statusList WHERE statusName= 'Created')
but I also have a second stored procedure that needs to make reference to this procedure first, in order to resolve an id - ie:
exec dbo.AddProduct_Insert 'widget1'
which currently performs:SET @statusID = (SELECT statusID FROM statusList WHERE statusName='Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID)
I want to simply the insert to perform (in one sproc):
SET @statusID = EXEC deriveStatusID ('Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID)
This works fine if I call this stored procedure in code first, then pass it to the second stored procedure, but NOT if it is reference in the second stored procedure directly (I end up with an empty value for @statusID in this example).
My actual "Insert" stored procedures are far more complicated, but I am working towards lightening the business logic in my application ( it shouldn't have to pre-vet the data prior to executing a valid insert).
Hopefully this makes some sense - it doesn't seem right to me that this is impossible, and am fairly sure I'm just missing some simple syntax - can anyone assist?
I have one stored procedure for insert, update and delete operations, I need automatically logged the insert,update and delete operations.
How can I set auto logged mechanism and how can I access the logs in c#?
Thanks
Hi,
I'm reasonably new to ASP.NET 2.0
I'm in my wizard_FinishButtonClick event, and from here, I want to take data from the form and some session variables and put it into my database via a stored procedure. I also want the stored procedure to return an output value. I do not need to perform a select or a delete.
For the life of me, I can't find a single example online or in my reference books that tells me how to accomplish this task using a SqlDataSource control. I can find lots of examples on sqldatasources that have a select statements (I don't need one) and use insert and update sql statements instead of stored procedures (I use stored procedures).
I desperately need the syntax to:
a) create the SqlDataSource with the appropriate syntax for calling a stored procedure to update and/or insert (again, this design side of VS2005 won't let me configure this datasource without including a select statement...which I don't need).
b) syntax on how to create the parameters that will be sent to the stored procedure for this sqldatasource (including output parameters).
c) syntax on how to set the values for these parameters (again...coming from form controls and session variables)
d) syntax on how to execute, in the code-behind, the stored procedure via the sqldatasource.
If anybody has sample code or a link or two, I would be most appreciative.
Thank you in advance for any help!
Hi,I'm tring to call a stored procedure i'v made from a DNN module, via .net control.When I try to execute this sql statement: EXEC my_proc_name 'prm_1', 'prm_2', ... the system displays this error: Could not find stored procedure ''. (including the trailings [".] chars :)I've tried to run the EXEC statement from SqlServerManagement Studio, and seems to works fine, but sometimes it displays the same error. So i've added the dbname and dbowner as prefix to my procedure name in the exec statement and then in SqlSrv ManStudio ALWAYS works, but in dnn it NEVER worked... Why? I think it could be a db permission problem but i'm not able to fix this trouble, since i'm not a db specialist and i don't know which contraint could give this problem. Also i've set to the ASPNET user the execute permissions for my procedure... nothing changes :( Shoud someone could help me? Note that I'm using a SqlDataSource object running the statement with the select() method (and by setting the appropriate SelectCommandType = SqlDataSourceCommandType.StoredProcedure ) and I'm using the 2005 sql server express Thank in advance,(/d
View 3 Replies View Relatedtable2 is intially populated (basically this will serve as historical table for view); temptable and table2 will are similar except that table2 has two extra columns which are insertdt and updatedt
process:
1. get data from an existing view and insert in temptable
2. truncate/delete contents of table1
3. insert data in table1 by comparing temptable vs table2 (values that exists in temptable but not in table2 will be inserted)
4. insert data in table2 which are not yet present (comparing ID in t2 and temptable)
5. UPDATE table2 whose field/column VALUE is not equal with temptable. (meaning UNMATCHED VALUE)
* for #5 if a value from table2 (historical table) has changed compared to temptable (new result of view) this must be updated as well as the updateddt field value.
Hi,I am getting error when I try to call a stored procedure from another. I would appreciate if someone could give some example.My first Stored Procedure has the following input output parameters:ALTER PROCEDURE dbo.FixedCharges @InvoiceNo int,@InvoiceDate smalldatetime,@TotalOut decimal(8,2) outputAS .... I have tried using the following statement to call it from another stored procedure within the same SQLExpress database. It is giving me error near CALL.CALL FixedCharges (@InvoiceNo,@InvoiceDate,@TotalOut )Many thanks in advanceJames
View 16 Replies View RelatedHello people,
When I am trying to call a function I made from a stored procedure of my creation as well I am getting:
Running [dbo].[DeleteSetByTime].
Cannot find either column "dbo" or the user-defined function or aggregate "dbo.TTLValue", or the name is ambiguous.
No rows affected.
(0 row(s) returned)
@RETURN_VALUE =
Finished running [dbo].[DeleteSetByTime].
This is my function:
ALTER FUNCTION dbo.TTLValue
(
)
RETURNS TABLE
AS
RETURN SELECT Settings.TTL FROM Settings WHERE Enabled='true'
This is my stored procedure:
ALTER PROCEDURE dbo.DeleteSetByTime
AS
BEGIN
SET NOCOUNT ON
DECLARE @TTL int
SET @TTL = dbo.TTLValue()
DELETE FROM SetValues WHERE CreatedTime > dateadd(minute, @TTL, CreatedTime)
END
CreatedTime is a datetime column and TTL is an integer column.
I tried calling it by dbo.TTLValue(), dbo.MyDatabase.TTLValue(), [dbo].[MyDatabase].[TTLValue]() and TTLValue(). The last returned an error when saving it "'TTLValue' is not a recognized built-in function name". Can anybody tell me how to call this function from my stored procedure? Also, if anybody knows of a good book or site with tutorials on how to become a pro in T-SQL I will appreciate it.
Your help is much appreciated.
Hi, i've had this query method:
34 public void AddDagVerslagCategorie(int logID, HistoriekDetail historiekDetail)35 {36 SqlConnection oConn = new SqlConnection(_connectionString);37 string strSql = "Insert into LogDetail (LogID, CategorieID, Inhoud)";38 strSql += "values(@logID, @categorieID, @inhoud)";39 SqlCommand oCmd = new SqlCommand(strSql, oConn);40 oCmd.Parameters.Add(new SqlParameter("@logID", SqlDbType.Int)).Value = logID;41 oCmd.Parameters.Add(new SqlParameter("@categorieID", SqlDbType.Int)).Value = historiekDetail.CategorieID;42 oCmd.Parameters.Add(new SqlParameter("@inhoud", SqlDbType.VarChar, 100)).Value = historiekDetail.Inhoud;43 44 try45 {46 oConn.Open();47 int rowsAffected = oCmd.ExecuteNonQuery();48 if (rowsAffected == 0) throw new ApplicationException("Fout toevoegen historiek detail");49 oCmd.CommandText = "select @@IDENTITY";50 oCmd.Parameters.Clear();51 historiekDetail.HistoriekDetailID = (int)(decimal)oCmd.ExecuteScalar();52 }53 catch (Exception ex)54 {55 throw new ApplicationException("Fout toevoegen historiek detail: " + ex.Message);56 }57 finally58 {59 if (oConn.State == ConnectionState.Open) oConn.Close();60 }61 }
which i've converted to a stored procedure: 1 ALTER PROCEDURE [dbo].[insert_DagVerslagDetail]
2 -- Add the parameters for the stored procedure here
3 @dagverslagdetailID int,
4 @logID int,
5 @categorieID int,
6 @inhoud varchar(100)
7 AS
8 BEGIN
9 -- SET NOCOUNT ON added to prevent extra result sets from
10 -- interfering with SELECT statements.
11 SET NOCOUNT ON;
12 SET @dagverslagdetailID = SCOPE_IDENTITY()
13
14 -- Insert statements for procedure here
15 BEGIN TRANSACTION
16 INSERT LogDetail (LogID, CategorieID, Inhoud)
17 VALUES(@logID, @categorieID, @inhoud)
18 COMMIT TRANSACTION
19 END
Now i would like to call that stored procedure in my previous method, so i've changed it to this:
1 public void AddDagVerslagCategorie(int logID, HistoriekDetail historiekDetail)
2 {
3 SqlConnection oConn = new SqlConnection(_connectionString);
4 string strSql = "insert_DagVerslagDetail";
5 strSql += "values(@logID, @categorieID, @inhoud)";
6 SqlCommand oCmd = new SqlCommand(strSql, oConn);
7 oCmd.CommandType = CommandType.StoredProcedure;
8 oCmd.Parameters.Add(new SqlParameter("@logID", SqlDbType.Int)).Value = logID;
9 oCmd.Parameters.Add(new SqlParameter("@categorieID", SqlDbType.Int)).Value = historiekDetail.CategorieID;
10 oCmd.Parameters.Add(new SqlParameter("@inhoud", SqlDbType.VarChar, 100)).Value = historiekDetail.Inhoud;
11
12 try
13 {
14 oConn.Open();
15 int rowsAffected = oCmd.ExecuteNonQuery();
16 if (rowsAffected == 0) throw new ApplicationException("Fout toevoegen historiek detail");
17 oCmd.CommandText = "select @@IDENTITY";
18 oCmd.Parameters.Clear();
19 historiekDetail.HistoriekDetailID = (int)(decimal)oCmd.ExecuteScalar();
20 }
21 catch (Exception ex)
22 {
23 throw new ApplicationException("Fout toevoegen historiek detail: " + ex.Message);
24 }
25 finally
26 {
27 if (oConn.State == ConnectionState.Open) oConn.Close();
28 }
29 }
Do i still need the lines 17 oCmd.CommandText = "select @@IDENTITY";
19 historiekDetail.HistoriekDetailID = (int)(decimal)oCmd.ExecuteScalar();
Because i've declared the identity in my stored procedure
Hi, I have a stored procedure, and it is expecting an output. If I declared the passing varaible as ref, it compiles fine, but it is not returning any value. If I pass the varaible as out, and add the paramater
MyComm.Parameters.Add(new SqlParameter("@ReturnValue", returnValue)); it gives the following error.
Compiler Error Message: CS0269: Use of unassigned out parameter 'quoteID'.
And if I don't supply the previous statement, the following error occurs.
System.Data.SqlClient.SqlException: Procedure 'CreateData' expects parameter '@ReturnValue', which was not supplied.
How Can I fix this? thanks.
I have a stored procedure that calls a DTS package to grab a text file that has been uploaded to the server and merge it with a table on the database. The DTS package works woderfully in SQL, as does the the file upload. The problem arrises when I create a stored procedure to run the DTS package. I know that you have to shell out and do a command line on the SQL server (and I think that I got the syntax correct) but its calling the Stored Procedure in the ASP.NET app that is causing me hardship. Here is the code that I have so far:
Stored Procedure:
CREATE PROCEDURE spSampleData AS exec master..xp_cmdshell 'dtsrun /SZEUSsqlServer113 /NdtsPackage /UuserID /Ppassword'
GO
VB to run DTS:
Dim myCommand As SqlCommand
myCommand.CommandType = CommandType.StoredProcedure
myCommand.CommandText = "spSampleData"
myCommand.ExecuteNonQuery()
I'm not sure what I am doing wrong but any help would be great.
Thanks!
I am trying to set up a call to a Stored Procedure to do an Insert. Here is my code snippet:
<%@ Page Language="VB" %>
<%@ import Namespace="System" %>
<%@ import Namespace="System.Data.SqlClient" %>
.
.
.
Dim loConn as New SqlConnection(ConfigurationSettings.AppSettings("ConnectionString"))
Dim cmdInsert as New SQLCommand("AdminUser_Insert", loConn)
cmdInsert.CommandType = CommandType.StoredProcedure
Dim InsertForm As New SqlDataAdapter()
InsertForm.InsertCommand = cmdInsert
cmdInsert.Parameters.Add(New SqlParameter("@RETURN_VALUE", SqlDbType.bigint, 8, "Account_Number"))
cmdInsert.Parameters("@RETURN_VALUE").Direction = ParameterDirection.ReturnValue
cmdInsert.Parameters.Add(New SqlParameter("@UserID", SqlDbType.varchar, 50, "UserID"))
cmdInsert.Parameters("@UserID").Value = Request("UserID")
cmdInsert.Parameters.Add(New SqlParameter("@Password", SqlDbType.varchar, 32, "Password"))
cmdInsert.Parameters("@Password").Value = Request("Password")
cmdInsert.Parameters.Add(New SqlParameter("@First_Name", SqlDbType.varchar, 32, "First_Name"))
cmdInsert.Parameters("@First_Name").Value = Request("FirstName")
cmdInsert.Parameters.Add(New SqlParameter("@Middle_Name", SqlDbType.varchar, 32, "Middle_Name"))
cmdInsert.Parameters("@Middle_Name").Value = Request("MiddleName")
cmdInsert.Parameters.Add(New SqlParameter("@Last_Name", SqlDbType.varchar, 32, "Last_Name"))
cmdInsert.Parameters("@Last_Name").Value = Request("LastName")
loConn.Open()
command.ExecuteNonQuery()
loConn.Close()
I get the following error:
Compilation Error
Description: An error occurred during the compilation of a resource required to service this request. Please review the following specific error details and modify your source code appropriately.
Compiler Error Message: BC30451: Name 'CommandType' is not declared.
This error happens on the line: cmdInsert.CommandType = CommandType.StoredProcedure
Any help would be appreciated,
Greg
Hello everybody,
How can I call DTS from stored procedure, any help pls.
PS: I appreciate if you please give me an example.
Thank you....
I'm trying to call a job from a stored procedure.
To do so, I've found that sp_start_job is doing just that.
My problem is that the sp_start_job is not in my master
database stored procedures and I don't know how to add it.
I'm working with SQL Server 7 Enterprise without the SP.
Am I looking for the right thing ? (sp_start_job)
Where can I find it ?
Hey, I have a parent SP, and within that parent I want to call a a child what is the code to call that child procedure? or teh easiest way to make that happen?
View 1 Replies View RelatedCan someone tell me a straightforward way to call a VB app (that accepts command line arguments) from a stored procedure.
I have got it to work by using xp_cmdshell, but in practice, the security constraints here prevent using this. Our DBAs don't want to set the proxy account required for a non-sysadmin user to eexecute xp_cmdshell.
I know that writing an extended SP invoking a C++ dll would be the cleanest solution. However I don't have the knowledge to do that.
Any ideas?
Thanks
When I call a stored procedure from a dll written in Builder C++, it gets blocked. But if I call the same SP from the main program, it works fine. but I need to call SP from the dll. What's the problem?
Thanks...
Hi,
I am new to SQL and new to stored procedures!
What I am trying to do is call one stored procedure from another stored procedure. Very simple piece of code but can not get it to work correctly.....
This is the calling stored procedure: sp_TechRiskMandatory. It is calling a stored procedure called sp_Test.
What is happening is that it is executing the line before the "EXECUTE" command and never getting to this line.
If I put the "EXECUTE" command first it will execute this line and not get to the next.
My code is returning out of the stored procedure before finishing executing the remainder of the code....
CREATE PROCEDURE [sp_TechRisk_Mandatory]
@Conclusion varchar(100),
@TechRisk varchar(100)
AS
If (@Conclusion = 'Application/Changed') and ((@TechRisk = " ") or (@TechRisk = "N/A"))
Begin
Select "AsxErrorMessage" = "Technical Risk must be specified"
EXECUTE sp_Test
End
Else
Begin
Select "Looks Good" = " "
EXECUTE sp_Test
End
GO
This is the code for the sp_Test:
CREATE PROCEDURE sp_Test
AS
BEGIN
Select "AsxErrorMessage" = "Test"
END
GO