Can't Enable SQLCacheDependency
Feb 1, 2007
I have a SQL 2005 database and am running the 2.0 framework. I cannot seem to enable SQL caching on the db. I'm using the command line tool as follows:
C:WINDOWSMicrosoft.NETFrameworkv2.0.50727>aspnet_regsql -S 99.99.999.999 -U
webteam -P sa -t tblname -d dbname -et
Enabling the table for SQL cache dependency.
.An error has happened. Details of the exception:
The database 'dbname' is not enabled for SQL cache notification
.
To enable a database for SQL cache notification, please use the System.Web.Cachi
ng.SqlCacheDependencyAdmin.EnableNotifications method, or the command line tool
aspnet_regsql. To use the tool, please run 'aspnet_regsql.exe -?' for more infor
mation.
C:WINDOWSMicrosoft.NETFrameworkv2.0.50727>
I've replaced the ip address, dbname and tblname with ficticious names for obvious reasons here in the post.
What command can I enter to enable the database for caching?
View 4 Replies
ADVERTISEMENT
Aug 1, 2007
Q1: Can I just open these protocols I need (see web links below) and then close them down again after SQLCacheDependency has been enabled? Note: The website (asp.net 2.0/SQL server Express) operates OK right now with asp.net - but it does not have SQLCacheDependency enabled.
Problem: When I try to do this I keep on getting this error message:
"An error has occurred when establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections."
None of these 3 commands have worked (all give the same message above):
aspnet_regsql.exe -U user1 -P pwd1 -S server1/SQLEXPRESS -d myDBName -ed aspnet_regsql.exe -E -S server1/SQLEXPRESS -d myDBName -ed aspnet_regsql.exe -E -S .SqlExpress -d myDBName -ed
I am trying to run these commands via a MSTSC connection. Q2: Is that (terminal server) the problem (the "remote connection") complained of above ?
This is the command that worked on my local dev machine:
aspnet_regsql.exe -E -S .SqlExpress -d myDBName -ed
Q3: Must I really go through the procedure "How to: Configure Express to accept remote connections" at:
http://support.microsoft.com/default.aspx?scid=kb;EN-US;914277http://blogs.msdn.com/sqlexpress/archive/2005/05/05/415084.aspx
I don't really want to have SQL server accepting any connections as the last time it was listening on these ports we had so many attacks being made that it was filling up the logs!
What I can't understand is that every night the database is backed up with the following command line code (operating as a Scheduled Task):
sqlcmd -s server1/SQLEXPRESS -i MW4BAK.SQL -E
Q4: So if the server is happy receiving commands from 'sqlcmd.exe' why does it have such problems with 'aspnet_regsql.exe'
Q5: If I grouped those statements I need to setup SQLCacheDependency under a Scheduled Task would they work (as there would presumably be no remote connection then) or is it something in the nature of the connection established which allows sqlcmd.exe to work but stops aspnet_regsql.exe?
View 2 Replies
View Related
Jul 20, 2006
I've been having trouble getting the SqlCacheDependency to work without polling (which is set up through SqlCacheDependencyAdmin or aspnet_regsql). If you check out the documentation it says things like:
Microsoft:
View 18 Replies
View Related
May 21, 2007
I have implemented a caching strategy using the sqlcachedependency and sql server 2005 backend using the broker service.This works fine and well when i am connecting to the SQL Server 2005 under service account that is in the role db_owner. In a production enivironment i am reluctant to do this so i created another service account that only has execute permissions on the stored procedures.When i use this limited service account for my ASP.net web application, the broker service does not send any messages to the web app to invalid the cache. When checking the event log and SQL profiler i get errors all relating to the user not having access to the SqlQueryNotificationService queue. So i did a lot of googling and tried running the grant scripts below with no luck using this limited service account. Keep in mind everything works fine if i use an account with db_owner priviledges. These are the grants i have tried based on numerious articles GRANT CREATE PROCEDURE TO three_d_ss_loginGRANT CREATE QUEUE TO three_d_ss_loginGRANT CREATE SERVICE TO three_d_ss_loginGRANT SUBSCRIBE QUERY NOTIFICATIONS TO three_d_ss_loginGRANT RECEIVE ON QueryNotificationErrorsQueue TO three_d_ss_loginGRANT REFERENCES ON CONTRACT::[http://schemas.microsoft.com/SQL/Notifications/PostQueryNotification] TO three_d_ss_login These are the grants i have tried that does not work GRANT SEND ON SERVICE::SqlQueryNotificationService TO three_d_ss_loginGRANT RECEIVE on SqlQueryNotificationService_DefaultQueue to three_d_ss_loginCan some one suggest what i need to do to get sqlcacheddependencies to work with a sql2005 backend under a limited priviledged service account? ThanksJim
View 4 Replies
View Related
Jun 25, 2007
Hi, I'm trying to set up a SqlCacheDependency using the Query notifications of SQL Server 2005.
I haven't even got to the point of testing the notifications part. My problem is that my DataTable is not
even getting stored in the cache when I insert it. The cache seems to be getting invalided as soon
as I add the DataTable. Here is my code:
(am trying to get a simple example working first)protected void Page_Load(object sender, EventArgs e)
{ DataTable results = (DataTable)HttpRuntime.Cache.Get("supplyFunctions");
if (results == null)
{ Response.Write("Cache Invalidated, hitting DB. TIME: " + DateTime.Now.ToString());
results = getSupplyFunctions();
}
else
{ Response.Write("got from Cache, TIME: " + DateTime.Now);
} GridView1.DataSource = results;
GridView1.DataBind();
}private DataTable getSupplyFunctions()
{ DataTable results = new DataTable(); using (SqlConnection connection = new SqlConnection(ConfigurationManager.ConnectionStrings["ConnectionString"].ToString()) )
{ using (SqlCommand command = connection.CreateCommand())
{
command.CommandText = "schema.myStoredProc"; command.CommandType = CommandType.StoredProcedure;
SqlCacheDependency dependency = new SqlCacheDependency(command); SqlDataAdapter adapter = new SqlDataAdapter();
adapter.SelectCommand = command; DataSet dataset = new DataSet();
adapter.Fill(dataset);
results = dataset.Tables[0];
HttpRuntime.Cache.Insert("supplyFunctions", results, dependency);
}
} return results;
}
Also, whats weird is that when I keep refreshing the page, after like 5 to 10 minutes it works, and starts caching the data.
This disturbs me-- I would like to know what is going on. I am pretty sure my stored procedure doesn't break the rules of the query notifications. Can someone help me out?!??!
Thanks!
View 2 Replies
View Related
Sep 30, 2007
Hi all,I've been able to successfully use SQLCacheDependency and my test application is using only one database table to test SQLCacheDependency. Now, I was reading "Programming Microsoft ASP.NET 2.0" by Dino Esposito and I've couple of questions.a)-SQLCache will expire on Insert, Update and Delete queries on the database table? Am I right? b)-Right now I'm using SQLCacheDependency on one table, can I use it on more than one table ? If I can't , can you please give me some ideas on how to use SQLCacheDependency on more than one table? c)-Lastly, If large number of clients are using my application, what about the performance gains/losses if I use SQLCacheDependency? I will really appreciate your help. Thanks,Oltmans
View 1 Replies
View Related
Oct 1, 2007
Hi All,I've successfully implemented an example of SQLCacheDependency on one database table. I was reading "Programming Microsoft ASP.NET 2.0" by Dino Esposito and I've couple of questions. I will really appreciate your help.a)-Can I use SQLCacheDependency on more than one database tables? If I can't then I will appreciate if you can give me couple of hints as to how to do this.b)-As I understand SQLCache on a table will expire if any Insert and Update SQL operations happen on that table.c)-Our software is being used by many clients. Do you think SQLCacheDependency will have some sort of performance hits?I will really appreciate any help.Thanks,Oltmans
View 1 Replies
View Related
Oct 10, 2007
I am using SqlCacheDependency to monitor a database table for changes.
Unfortunately, it is polling the table too often and is causing
performance issues. It seems to poll at least once a second. So now I'm
trying to find a way to adjust it so that it polls about once every 10
seconds.The
code that uses the SqlCache Dependency is located in a Class Library
Project that is used by my web application project. The code is as
follows:// in the class constructorSqlDependency.Start("...some connection string");// in the body of a methodusing (SqlConnection connection = new SqlConnection("...same connection..."){ connection.Open(); SqlCommand command = connection.CreateCommand(); command.CommandText = query; SqlDependency dependency = new SqlDependency(command); dependency.OnChange += OnDepChange; SqlDataReader data = command.ExecuteReader(); // code that uses the data goes here}public void OnDepChange(object sender, SqlNotificationEventArgs e){ DoSomething();}I
did a little searching on the web and noticed that some examples showed
that you could adjust the pollTime in the web.config file:<sqlCacheDependency enabled="true" pollTime="30000"> <databases> <add name="Pubs" connectionStringName="PubsConn" /> </databases></sqlCacheDependency>However,
as I stated earlier, the code that uses the SqlCacheDependency is
located in a Class Library, so this configuration doesn't help me. Is
there a way to adjust the pollTime without getting my connection string
from the web.config?
View 1 Replies
View Related
May 1, 2006
I can create a SqlCacheDependency, and link it to a cached item in httpcontext cache. When something change, it will remove the cached item from the cache. I think I have to redo the process when that happens - prepare sql command, create SqlCacheDependency and insert the item into cache. Now I only need a notification from my SQL when something changes in one of my table, I don;t need read anything from db, and I think I should find a way to not recreate the SqlCacheDependency object everytime?
any suggestion?
View 2 Replies
View Related
May 3, 2006
I have some problem with ASP.NET cache, I found other people has similar problem, but I didn't find real solution.
The one bother me most is the SQLCacheDependency doesn't work stable. I insert object in cache and has SQLCacheDependency linked. After a period of time, it stopped working. That means the the object is still in cache, but change on db side doesn't remove the cache entry. I am not sure if it is ASP side or SQL side, I feel it is ASP side.
I am using 2.0 + SQL 2005.
Once the db command notification stop working, you have to restart IIS or clear all items in cache since you don't kno which one is changed.
Any suggestion?
View 12 Replies
View Related
Sep 12, 2007
I've set up a SqlCacheDependency in my Asp.Net application, but the dependency invalidates the cache immediately every time the page is hit.
I think the problem may be with my SQL Query, but it seems to me to meet the requirements on the Special Considerations When Using Query Notifications page on MSDN. Could someone take a look at this query and tell me if I've done something wrong? Thank you.
Here's my query:
Code Snippet
USE [chameleon]
GO
SET ANSI_NULLS ON
GO
SET ANSI_PADDING ON
GO
SET ANSI_WARNINGS ON
GO
SET CONCAT_NULL_YIELDS_NULL ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET NUMERIC_ROUNDABORT OFF
GO
SET ARITHABORT ON
GO
ALTER PROCEDURE [dbo].[usp_customers_by_site_id]
@site_id INT
AS
SELECT
customers.customer_id,
customers.name,
customers.po_prefix,
customers.dt_created,
customers.created_by AS auid,
customers.po_required
FROM dbo.customers
WHERE customers.site_id = @site_id
AND customers.is_active = 1
and here's the code in my Asp.Net site where I try to use the SqlCacheDependency:
Code Snippet
public List<Customer> GetCustomersBySite(int siteID)
{
List<Customer> customers = new List<Customer>();
if (HttpRuntime.Cache["CustomersBySite" + siteID] != null){
customers = (List<Customer>)HttpRuntime.Cache["CustomersBySite" + siteID];
}
else
{
using (SqlCommand command = new SqlCommand("usp_customers_by_site_id", Connection)){
command.CommandType = CommandType.StoredProcedure;
command.Parameters.Add("@site_id", SqlDbType.Int).Value = GetDBValue(siteID, false);
SqlCacheDependency dependency = new SqlCacheDependency(command);
try{
Connection.Open();
SqlDataReader reader;
reader = command.ExecuteReader(CommandBehavior.SingleResult);
while (reader.Read()){
customers.Add(PopulateCustomer(reader));
}
HttpRuntime.Cache.Insert("CustomersBySite" + siteID, customers, dependency, DateTime.Now.AddMinutes(Configuration.CacheDuration), System.Web.Caching.Cache.NoSlidingExpiration);
}
finally{
Connection.Close();
}
}
}
return customers;
}
View 1 Replies
View Related
Jun 15, 2006
I am using a grid to display the data on my webpage, and I have 3 projects in my solution (UI, BLL, DAL). When I load the webpage I am creating the instance of a class written n my BLL project to populate the data, and in BLL I'm creating the object for the class in DAL and returning the datatable.
Now when I refresh the page using F5, the SQLDependency is working fine. But, when I use the Paging or Sorting option's on my grid I see in SQL Profiler that the query is posted back to the SQLServer to get the data.
If this is the senario then how can I make use of the cache object in .NET 2.0.
Please advice,
Ravi
View 1 Replies
View Related
Jul 24, 2006
Decided to try testing SqlCacheDependency and got the following.... thoughts???After using the following code...void Application_Start(object sender, EventArgs e) { System.Data.SqlClient.SqlDependency.Start (ConfigurationManager.ConnectionStrings["testConnectionString"].ConnectionString); }//-------------------------------- ... then more code SqlCommand sqlCommand = new SqlCommand("select ApplicationName from dbo.aspnet_Applications", sqlConnection); SqlCacheDependency sqlCacheDependency = new SqlCacheDependency(sqlCommand);//-------------------------------- ... then more codeMembershipUser membershipUser = Membership.CreateUser(defaultUserNameTextbox.Text, defaultUserPasswordTextbox.Text); if (membershipUser != null) {//----------------------------- ... more codethe above code no longer works giving the below exception : using a plain database generated using the following statement
"aspnet_regsql -E -S . -d testDatabase -A all"
[SqlException (0x80131904): UPDATE failed because the following SET options have incorrect settings: 'QUOTED_IDENTIFIER'. Verify that SET options are correct for use with indexed views and/or indexes on computed columns and/or query notifications and/or xml data type methods.]
System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) +177
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +68
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +199
System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +2300
System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString) +147
System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async) +1021
System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result) +314
System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe) +413
System.Data.SqlClient.SqlCommand.ExecuteNonQuery() +115
System.Web.Security.SqlMembershipProvider.CreateUser(String username, String password, String email, String passwordQuestion, String passwordAnswer, Boolean isApproved, Object providerUserKey, MembershipCreateStatus& status) +3325
System.Web.Security.Membership.CreateUser(String username, String password, String email, String passwordQuestion, String passwordAnswer, Boolean isApproved, Object providerUserKey, MembershipCreateStatus& status) +214
System.Web.Security.Membership.CreateUser(String username, String password, String email) +31
System.Web.Security.Membership.CreateUser(String username, String password) +7
testCustomMembership.defaultCreateUserButton_Click(Object sender, EventArgs e) in c:projects
esearchsamplehandler estCustomMembership.aspx.cs:33
System.Web.UI.WebControls.Button.OnClick(EventArgs e) +75
System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +97
System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11
System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +4861
View 1 Replies
View Related
Jul 25, 2006
I have SQL Server 2005 and I am using .Net 2.0.
Is there a way to cache a query, basically I am going to do a SELECT * on a table that is called frequently.
I then want to query this DataTable that is in cache. I want to invalidate the cache when the table changes.
Everything I have read tells me to use the output caching directive. But, much of what I am doing doesn't end up in the output. Is there a way to invalidate the cache the same way without output caching and using the Service Broker?
View 1 Replies
View Related
Oct 16, 2007
Hello,
I have tried two ways for executing a query and creating a dependency
on it, one using plain Sql commands, the other using Enterprise
Library wrapped commands.
I keep getting:
Warning: Fatal error 682 occurred at Oct 12 2007 11:01AM. Note the
error and time, and contact your system administrator.
string xml = cmd.ExecuteScalar() as string;
When I execute it. Does anyone know what could cause this.
I have read both of these posts and have not yet been able to
investigate the SQL machine's event viewer though:
http://forums.asp.net/p/959871/1188606.aspx#1188606
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=1203630&SiteID=1
The "value" column is an XML datatype field.
Thanks,
Josh
public static ContentXmlUtilResult GetContentXml(
string key,
bool createDependency)
{
ContentXmlUtilResult result = new ContentXmlUtilResult();
string connString = Global.Current.ConnectionString;
using (SqlConnection conn =
new SqlConnection(connString))
{
SqlCommand cmd =
new SqlCommand(
"SELECT Value FROM dbo.ContentXml WHERE [Key]
= '" + key + "'",
conn);
if (createDependency)
{
System.Web.Caching.SqlCacheDependency dependency =
new SqlCacheDependency(cmd);
result.Dependency = dependency;
}
conn.Open();
string xml = cmd.ExecuteScalar() as string;
conn.Close();
result.Content = xml;
}
return result;
//SqlCommand cmd = (SqlCommand)
// Global.Current.Database.GetSqlStringCommand(
// //@"SELECT Value FROM dbo.ContentXml WHERE [Key] =
@Key");
// @"SELECT Value FROM dbo.ContentXml WHERE [Key] = '"
+ key + "'");
////cmd.Parameters.Add("@Key", SqlDbType.VarChar).Value =
key;
//if (createDependency)
//{
// System.Web.Caching.SqlCacheDependency dependency =
// new System.Web.Caching.SqlCacheDependency(cmd);
// result.Dependency = dependency;
//}
//string xml = Global.Current.Database.ExecuteScalar(cmd)
as string;
//result.Content = xml;
//return result;
}
View 1 Replies
View Related
Jan 31, 2006
I've the following simple code bound to a button on a Web page
string time = (string)Cache["KEY"];
if (time == null)
{
SqlConnection sqlConnection = new SqlConnection(@"Server=BIZYUSUFSQL2005;Database=Deneme;User Id=sa;Password=;");
SqlCommand command = new SqlCommand(@"select KOLON1 from dbo.CACHE", sqlConnection);
sqlConnection.Open();
SqlCacheDependency dependency = new SqlCacheDependency(command);
time = System.DateTime.Now.ToString();
Cache.Insert("KEY", time, dependency);
command.ExecuteNonQuery();
sqlConnection.Close();
}
return time;
This code has to return the time value from cache. And when a record is inserted into the CACHE table, the cache item has to be invalidated and the new time value has to be returned.
The code works properly for 2-3 minutes. But when there is no activity for 5 minutes, the cache invalidation does not work anymore.
View 1 Replies
View Related
May 23, 2008
do we have to create connection and assign it to command object before creating SqlCacheDepency? chek the code below. SqlServer is not invalidating cache when there is update. When i create Dependency using command object, at that time command object does not have connection. It will assign connection to command object in Excute method
SqlCommand cmd = new SqlCommand(commandText);cmd.CommandType = CommandType.StoredProcedure;SqlCacheDependency cacheItem = new SqlCacheDependency(cmd);DataSet result;result = DBHelper.Execute(cmd);HttpRuntime.Cache.Insert(cacheItemName, result, cacheItem);
View 4 Replies
View Related
Sep 22, 2006
SQL Server 2005 / .NET 2.0 Web App - SqlCacheDependency is not invalidated and I see an error sql log that occurs after the specified table changes:
2006-09-22 12:18:51.84 spid21s The query notification dialog on
conversation handle '{8D7EF5BC-544A-DB11-B6E0-000F1FD735BF}.' closed
due to the following error: '<?xml version="1.0"?><Error
xmlns="http://schemas.microsoft.com/SQL/ServiceBroker/Error"><Code>-8490</Code><Description>Cannot
find the remote service
'SqlQueryNotificationService-d61fa581-0567-43ba-991f-37499e87cbf6'
because it does not exist.</Description></Error>'.
I've read all applicable articles that I can find and applied hotfix kb916002. The sqldependency has never worked, it is not a stability issue as described in kb916002. In a trace I can see the sqldependency starts correctly. I have a console app that works fine with SqlDependancy calling same database and login creds. I don't know what to think. Calling sys.dm_qn_subscriptions show no subscriptions when this app starts as does the console app. Please advise as it looks like a broker issue.
Thanks
View 3 Replies
View Related
Jul 5, 2007
Hi,
I am using SqlCacheDependency with the query notifications of SQL server 2005.
It is working nicely with the dbo.owner account but not with my web user account,
so I am thinking something is wrong with the permissions.
After searching around, it seems that the main permissions to enable are these:
GRANT SUBSCRIBE QUERY NOTIFICATIONS TO theAccount
GRANT RECEIVE ON QueryNotificationErrorsQueue TO theAccount
GRANT REFERENCES on CONTRACT::[http://schemas.microsoft.com/SQL/Notifications/PostQueryNotification] to theAccount
GRANT SELECT TO theAccount.
I enabled these and it still doesn't work. When I change my table, my cache is not getting invalidations.
Does anyone know what could be going on? Or perhaps how can I trace the problem and get some clues?
thanks so much,
-tajmahal
View 3 Replies
View Related
Feb 28, 2005
Hi evryone
I have two databases. one is bayan and other is clearance. clearance was already there. i created new bayan. both database having same things. such table ,views.
both contains arabic and english records.
when i try to fetch records from clearance table as arabic it is working
the query is like:
select * from customers where cust_name_araibc='here arabic text'
it is working fine
but same query i try with bayan databses it runs but it doesnt display any records.
So is there anything like to enable languages in sql server databses.
Please reply soon
Its very urgent.
thanx in advance
View 4 Replies
View Related
May 14, 2008
hi
i have backup of transaction log of database but tracnscation log check box is desable ho i can enable this
View 3 Replies
View Related
Oct 24, 2007
how do i enable logs on a DTS on sql server2005?
Thanks
Peleg
Israel -the best place to live in aftr heaven 9but no one wan't to go there so fast -:)
View 1 Replies
View Related
Mar 3, 2008
I have to disable index using
alter index empind on emp diable;
but how to enable
alter index empind on emp enable;/its not working
View 1 Replies
View Related
Mar 8, 2008
All, I am using SSIS in sqlserver. I wanted to enable logging in SSIS. I just want to log all the activities in the log file. How can i enable logging in SSIS? I would appreicate if any one could answer for this. thanks in Advance.
View 1 Replies
View Related
Jul 23, 2005
Hi!I know that you can enable/disable a trigger through the altertable command. Once a trigger is disabled, is there a wayto determine whether it is disabled or enabled? I see there is astatus column in sysobjects ...is that what I should be using?thanks in advance for any helpKaren
View 1 Replies
View Related
Nov 30, 2006
Hello,
I understand that SQL2005x64 bits ignore AWE enable in SQL because it can address all the memory without having to use AWE. How about 32 bits SQL2005, does it support AWE enabled??
View 1 Replies
View Related
Sep 28, 2006
Hi Folks,
I was testing my error handling and purposefully failed some messages. Automatic posion message detection kicked in and disabled my queue. I tried the following, one at a time to enable it again but it doesn't work:
ALTER QUEUE MigrationQueue WITH STATUS = ON;
ALTER QUEUE MigrationQueue WITH STATUS = ON, ACTIVATION (STATUS = ON);
I would have thought the first line would've worked but I get the following when trying to receive...
The service queue "MigrationQueue" is currently disabled.
Help.
View 6 Replies
View Related
May 28, 2007
I have a problem on creating a report using Microsoft SQL Server Business Intelligence Development Studio. I am new to this environment, anybody here can help me on how to enable the "DrillDown" on the table?
When I am using the wizard, the option to enable the drill down will appear, but when I am using "Report Server Project", I really don't know how to enable it, and theres was no table properties on how to enabled it.
Could you help me please
Thanks
View 4 Replies
View Related
Aug 10, 2007
Hi,
I am using DMO + VBScript to enable the xp_cmdshell feature in SQL Server 2005 Express.
But I get error "Item cannot be found in the collection corrosponding to the requested name or ordinal".
Here is the script which I am using:
Dim excmd: Set excmd = CreateObject("ADODB.Command")
Set excmd.ActiveConnection = connx ' This was created earlier using sa login and connected to master database
excmd.CommandType = 4
excmd.CommandText = "sys.sp_configure"
excmd.Parameters.Refresh
excmd.Parameters(1).Value = "show advanced options"
excmd.Parameters(2).Value = 1
excmd.Parameters(3).Value = Null
excmd.Execute () ' This line failes
If (Err.Number <> 0) Then
LogText "Unable to execute stored procedure. " & Err.Number & " " & Err.Description
Exit Sub
End If
excmd.CommandText = "RECONFIGURE WITH OVERRIDE"
excmd.Parameters.Refresh
excmd.Execute ()
If (Err.Number <> 0) Then
LogText "Unable to Refresh. " & Err.Number & " " & Err.Description
Exit Sub
End If
excmd.CommandText = "sys.sp_configure"
excmd.Parameters.Refresh
excmd.Parameters(1).Value = "xp_cmdshell"
excmd.Parameters(2).Value = 1
excmd.Parameters(3).Value = Null
excmd.Execute ()
If (Err.Number <> 0) Then
LogText "Unable to execute sp xp_cmdshell. " & Err.Number & " " & Err.Description
Exit Sub
End If
excmd.CommandText = "RECONFIGURE"
excmd.Parameters.Refresh
excmd.Execute ()
If (Err.Number <> 0) Then
LogText "Unable to Refresh after running sp. " & Err.Number & " " & Err.Description
Exit Sub
End If
Can some body provide a clue to me !!!
Thanks in advance
Amit
View 1 Replies
View Related
Dec 11, 2007
Hi - can anyone advise if it is possible to enable SQL 2005 SSIS to use AWE? If it is possible - how is this enabled?
Thanks
BravehearT1326
View 3 Replies
View Related
Feb 13, 2008
I have a date parameter that users can not choose because it is grayed out. The Prompt User property is checked in Report Manager. What else do I need to do to enable this functionality. I'm using SSRS 2005
Thanks
Dean
View 5 Replies
View Related
Jul 25, 2006
I have a number of SqlDataSource objects in my application, which don't have Optimistic Concurrency option enabled. The SDS objects use custom Sql statements so I can no longer select the Advance button to enable Concurrent Concurrency.
How can I enable this option? Is there a designt ime property, and even a run time property that can be set?
The only method we have so far is to create a new SDS, with Optimistic Concurrency switched on, then copy and paste my custom Sql into it and rebind my components..
Any help on this matter is appreciated.
Regards,
Steven
View 2 Replies
View Related
Jul 31, 2006
I have to admit I'm pretty new to ASP.net.
I'm trying to insert a row of data into my SQLExpress database table "Prets"
I'm getting the user_ID from the table "Membres"
Here's the code I have:
Imports System.Web.UI.PageImports System.Security.PrincipalImports WiseNetTableAdaptersPartial Class membre_sec_Pret_demande_pret Inherits System.Web.UI.Page Protected Sub submit_btn_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles submit_btn.Click Dim User As String = My.User.Name Dim pretAdapter As New PretsTableAdapter Dim membreAdapter As New MembresTableAdapter pretAdapter.AjouterPret(Convert.ToInt32(membreAdapter.GetUserIDbyName(User)), Convert.ToDecimal(montant_txt.Text), Convert.ToString(raison_txt.Text)) End SubEnd Class
And here's the error I get at runtime:
Failed to enable constraints. One or more rows contain values violating non-null, unique, or foreign-key constraints. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.ConstraintException: Failed to enable constraints. One or more rows contain values violating non-null, unique, or foreign-key constraints.Source Error:
Line 1610: }
Line 1611: WiseNet.MembresDataTable dataTable = new WiseNet.MembresDataTable();
Line 1612: this.Adapter.Fill(dataTable);
Line 1613: return dataTable;
Line 1614: }Source File: c:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Fileswisenetindustriesafc388c716067f12App_Code.tyietv41.0.cs Line: 1612 Stack Trace:
[ConstraintException: Failed to enable constraints. One or more rows contain values violating non-null, unique, or foreign-key constraints.]
System.Data.DataTable.EnableConstraints() +1820725
System.Data.DataTable.set_EnforceConstraints(Boolean value) +39
System.Data.DataTable.EndLoadData() +138
System.Data.Common.DataAdapter.FillFromReader(DataSet dataset, DataTable datatable, String srcTable, DataReaderContainer dataReader, Int32 startRecord, Int32 maxRecords, DataColumn parentChapterColumn, Object parentChapterValue) +218
System.Data.Common.DataAdapter.Fill(DataTable[] dataTables, IDataReader dataReader, Int32 startRecord, Int32 maxRecords) +318
System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +221
System.Data.Common.DbDataAdapter.Fill(DataTable[] dataTables, Int32 startRecord, Int32 maxRecords, IDbCommand command, CommandBehavior behavior) +162
System.Data.Common.DbDataAdapter.Fill(DataTable dataTable) +107
WiseNetTableAdapters.MembresTableAdapter.GetUserIDbyName(String nom) in c:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Fileswisenetindustriesafc388c716067f12App_Code.tyietv41.0.cs:1612
membre_sec_Pret_demande_pret.submit_btn_Click(Object sender, EventArgs e) in c:inetpubwwwrootWiseNetIndustriesmembre_secPretdemande_pret.aspx.vb:12
System.Web.UI.WebControls.Button.OnClick(EventArgs e) +105
System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +107
System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11
System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +5102
View 1 Replies
View Related
