We have an app that uses triggers for auditing. Is there a way to know the order that the records were inserted or deleted? Or maybe a clearer question is.... Can the trigger figure out if it was invoked for a transaction that "inserted and then deleted" a record versus "deleted and then inserted" a record? The order of these is important to our auding.
Is there an alternative to using FETCH to loop through the Inserted/Delete Tables within a trigger? Does this work?
SELECT * FROM Inserted BEGIN
if INSERTED.IsActive then ...
END
Would this only see the first record?
Currently I'm doing the following;
AS DECLARE @JobID INTEGER; DECLARE @IsActive BIT; DECLARE Temp CURSOR FOR SELECT JobID, IsActive FROM Inserted; BEGIN OPEN Temp; FETCH NEXT FROM Temp INTO @JobID, @IsActive; WHILE (@@FETCH_STATUS = 0) BEGIN
if @IsActive then ...
FETCH NEXT FROM Temp INTO @JobID, @IsActive; END; CLOSE Temp; DEALLOCATE Temp;
Is this the best method for looping through the Deleted/Inserted or any other table within a trigger?
I need to add the row number or record number to the 'inserted' and 'deleted' tables in a trigger.
Among other things, I have tried-
SELECT 1 as rowId, i.* INTO #ins FROM inserted i if @@ROWCOUNT > 1 --if multiple rows, set row number begin
SELECT @pkWhere = coalesce(@pkWhere + ' and ', ' where ') + PKF.colName + ' <= i.' + PKF.colName FROM #primaryKeyFields PKF set @strSQL = 'update #ins set rowId = (Select Count(*) From #ins i' + @pkWhere + ')'
exec (@strSql)
end
-the above sets rowId for every record to the total instead of sequential. Keep in mind that this code is used to create a trigger for any table, hence I cannot specify any column names literally.
I created manage update trigger to react on one column changes. There is an application which is working with DB, so I don't have access to SQL query which changes this column. In most cases trigger works fine, but in one case when this column changes, trigger is fired and IsUpdatedColumn is true for this column, but both inserted and deleted table are empty, so I can't get new value for this column. Any idea why is it happened? Is any way around?
This column type is uniqueidentifier. Inserted and deleted tables are empty when application is changing value from NULL to not null value, but if I change it myself from Management Studio inserted table contains right values. Most like problem is in query which is changing that value.
I dont know what I am doing wrong. The trigger (see below) is doing what I want it to do when I do this:
INSERT INTO dbo.personal
(personal_id, chef_id,fornamn, efternamn)
VALUES
(40, 100, 'Malin', 'Markusson' , 'Boss')
but when I remove one value, the result in the logtable is NULL:
INSERT INTO dbo.personal (personal_id, chef_id,fornamn, efternamn)
VALUES
(40, 100, 'Malin', 'Markusson' )
How can I change the trigger so that it will give me the information of the values that have been updated, inserted or deleted when I dontchange all values (just a couple of them)?
My trigger: CREATE Trigger trigex
ON dbo.personal
FOR insert, update,delete
AS
INSERT INTO logtable (Innan_värde, Ny_värde)
SELECT
rtrim(cast(d.personal_id as varchar)+', '+cast(d.chef_id as varchar)+', '+rtrim(d.efternamn)+', '+ rtrim(d.fornamn)+ ', '+ rtrim(d.titel)),
(cast(i.personal_id as varchar)+', '+cast(i.chef_id as varchar)+', '+rtrim(i.efternamn)+', '+ rtrim(i.fornamn)+ ' '+ rtrim(i.titel))
FROM inserted i full join deleted d on i.personal_id = d.personal_id
I really need your help now, and I know I can always count on this group for tough answers to tough questions. OK, here's my dilemma. I have my trigger, which upon a record being inserted into db1.table1, inserts the same record into db2.table2 (SQL 7 db on the same server). What's happening is only a few of the fields are getting over there, but most are ending up NULL or 0. Everything besides the following records are inserting into the other database table properly:
Note: The following fields have their Default Value set to (0) SystemID EventStatusID Coop NewProductFlag TVSupportFlag RadioSupportFlag FSISupportFlag RollbackPricing PleaseContactFlag
Default Value set to (1): KitInformationID
Here is the trigger:
CREATE TRIGGER EmoesImport ON mc_events FOR INSERT AS IF @@ROWCOUNT<>0
BEGIN
SET IDENTITY_INSERT mcweb2.dbo.mc_events ON
DECLARE @SystemID int DECLARE @EventID int DECLARE @AccountID int DECLARE @BillingContactID int DECLARE @EventName varchar(100) DECLARE @EventStatusID tinyint DECLARE @Coop bit DECLARE @CoopSupplier varchar DECLARE @SamplesPerDay int DECLARE @BrochuresPerDay int DECLARE @AverageDailyMovement int DECLARE @SalesGoal int DECLARE @NumberofDays int DECLARE @NumberofHours int DECLARE @NumberofStores int DECLARE @WeekNumber tinyint DECLARE @PreferredHourID tinyint DECLARE @PreferredHourother char(20) DECLARE @PreferredDate1 varchar(20) DECLARE @PreferredDate2 varchar(20) DECLARE @NewProductFlag bit DECLARE @TVSupportFlag bit DECLARE @RadioSupportFlag bit DECLARE @FSISupportFlag bit DECLARE @RollbackPricing bit DECLARE @PleaseContactFlag bit DECLARE @EventStoreSelection tinyint DECLARE @EventClusterID int DECLARE @KitInformationID tinyint DECLARE @KitDescription varchar(1000) DECLARE @KitOther varchar(200) DECLARE @MCProgNum varchar(7) DECLARE @rowguid uniqueidentifier
SELECT @SystemID = SystemID FROM INSERTED SELECT @EventID = EventID FROM INSERTED SELECT @AccountID = AccountID FROM INSERTED SELECT @BillingContactID = BillingContactID FROM INSERTED SELECT @EventName = EventName FROM INSERTED SELECT @EventStatusID = EventStatusID FROM INSERTED SELECT @Coop = Coop FROM INSERTED SELECT @CoopSupplier = CoopSupplier FROM INSERTED SELECT @SamplesPerDay = SamplesPerDay FROM INSERTED SELECT @BrochuresPerDay = BrochuresPerDay FROM INSERTED SELECT @AverageDailyMovement = AverageDailyMovement FROM INSERTED SELECT @SalesGoal = SalesGoal FROM INSERTED SELECT @NumberofDays = NumberofDays FROM INSERTED SELECT @NumberofHours = NumberofHours FROM INSERTED SELECT @NumberofStores = NumberofStores FROM INSERTED SELECT @WeekNumber = WeekNumber FROM INSERTED SELECT @PreferredHourID = PreferredHourID FROM INSERTED SELECT @PreferredHourother = PreferredHourother FROM INSERTED SELECT @PreferredDate1 = PreferredDate1 FROM INSERTED SELECT @PreferredDate2 = PreferredDate2 FROM INSERTED SELECT @NewProductFlag = NewProductFlag FROM INSERTED SELECT @TVSupportFlag = TVSupportFlag FROM INSERTED SELECT @RadioSupportFlag = RadioSupportFlag FROM INSERTED SELECT @FSISupportFlag = FSISupportFlag FROM INSERTED SELECT @RollbackPricing = RollbackPricing FROM INSERTED SELECT @PleaseContactFlag = PleaseContactFlag FROM INSERTED SELECT @EventStoreSelection = EventStoreSelection FROM INSERTED SELECT @EventClusterID = EventClusterID FROM INSERTED SELECT @KitInformationID = KitInformationID FROM INSERTED SELECT @KitDescription = KitDescription FROM INSERTED SELECT @KitOther = KitOther FROM INSERTED SELECT @MCProgNum = MCProgNum FROM INSERTED SELECT @rowguid = rowguid FROM INSERTED
I am having a hard time understanding triggers. My goal is to put a trigger on table x where records are UPDATED or DELETED. When this trigger fires I need to take the record ID and put the ID modified record into table y with the date modified. so basically logging the recordid changed with the getDate()
I don't quite understand how to get the rowid of the modified record.
Hi SQL fans,I realized that I often encounter the same situation in a relationdatabase context, where I really don't know what to do. Here is anexample, where I have 2 tables as follow:__________________________________________ | PortfolioTitle|| Portfolio |+----------------------------------------++-----------------------------+ | tfolio_id (int)|| folio_id (int) |<<-PK----FK--| tfolio_idfolio (int)|| folio_name (varchar) | | tfolio_idtitle (int)|--FK----PK->>[ Titles]+-----------------------------+ | tfolio_weight(decimal(6,5)) |+-----------------------------------------+Note that I also have a "Titles" tables (hence the tfolio_idtitlelink).My problem is : When I update a portfolio, I must update all theassociated titles in it. That means that titles can be either removedfrom the portfolio (a folio does not support the title anymore), addedto it (a new title is supported by the folio) or simply updated (atitle stays in the portfolio, but has its weight changed)For example, if the portfolio #2 would contain :[ PortfolioTitle ]id | idFolio | idTitre | poids1 2 1 102 2 2 203 2 3 30and I must update the PortfolioTitle based on these values :idFolio | idTitre | poids2 2 202 3 352 4 40then I should1 ) remove the title #1 from the folio by deleting its entry in thePortfolioTitle table2 ) update the title #2 (weight from 30 to 35)3 ) add the title #4 to the folioFor now, the only way I've found to do this is delete all the entriesof the related folio (e.g.: DELETE TitrePortefeuille WHERE idFolio =2), and then insert new values for each entry based on the new givenvalues.Is there a way to better manage this by detecting which value has to beinserted/updated/deleted?And this applies to many situation :(If you need other examples, I can give you.thanks a lot!ibiza
I am sure someone must have run into this before. I have a couple of tables with a parent child relationship.
I created a trigger on the insert of the parent but don't want it to fire until both the parent and child have been inserted into.
However sometimes the child may not get inserted in to at all. In other words it is a 1 to 0 or more relationship.
I created the whole insert into the parent and the child and wrapped it all up in a transaction hoping that the trigger would not fire until the transaction actually completed.
However such is not the case and it fires when the parent is inserted into but nothing is inserted into the child yet even though that is part of the transaction.
Is it possible to postpone trigger fire until after both parent and child table values have been inserted?
I am trying to update one table when records are inserted in another table.
I have added the following trigger to the table “ProdTr” and every time a record is added I want to update the field “Qty3” in the table “ActInf” with a value from the inserted record.
My problem appears to be that I am unable to fill the variables with values, and I cannot understand why it isn’t working, my code is:
ALTER trigger [dbo].[antall_liter] on [dbo].[ProdTr] for insert as begin declare @liter as decimal(28,6)
I would like to access the data inserted or deleted within a trigger. however the built-in tables -- inserted and deleted --- are not accessible. anyone knows why? And is there any other way to do this?
I am reading the WROX "Professional SQL Server 7 Programming" book. The following code appears on page 424:
CREATE TRIGGER ProductIsRationed ON Products FOR UPDATE AS IF EXISTS ( SELECT 'True' FROM Inserted i JOIN Deleted d ON i.ProductID = d.ProductID WHERE (d.UnitsInStock - i.UnitsInStock) > d.UnitsInStock / 2 AND d.UnitsInStock - i.UnitsInStock > 0 ) BEGIN RAISERROR('Cannot reduce stock by more than 50%% at once.',16,1) ROLLBACK TRAN END
The trigger fires when an UPDATE is made to Products table. The author states that the Inserted and Deleted tables only exist for the life of the trigger, not before, and not after the trigger runs. If this is true, then why would there be any rows in the Deleted table in this case? No rows were deleted within the trigger. As far as I can see, no rows have been updated either. If the condition does exist, no rows will be updated, and an error will be displayed. Otherwise, the row will be updated. Then there would be a row in the inserted table. But then the trigger is finished and the inserted table for that trigger disappears. I think my logic is flawed, which is why I am writing. I don't think I fully understand the Inserted and Deleted tables.
I want to know how inserted and deleted temp tables in SQL server work. My question is more regarding how they work when multiple users accessing the same database. Suppose two users update the database at the same time. In that case what are the values stored in the inserted and deleted tables.
I have a trigger that records changes to the database as in an audit trail. Like any other audit trail I insert data into my audit table from the inserted and deleted temp tables in MS SQL Server. I however am not clear as to how these inserted and deleted tables store values when two users update the database at the same time. Are there separate inserted and deleted tables for each session. The users access the database thru ASP pages.
The audit trail I am trying to use is http://www.nigelrivett.net/AuditTrailTrigger.html
I actually would like to store the inserted and deleted temp tables into other temporary tables so that I can access these tables thru a stored procedure. This is when the problem of same users updating the temporary tables is more pronounced.
I just ran across an issue on a SQL 2000 sp4 db where RI was being maintained solely with triggers. I am attempting to change the primary key of a parent table and cascade the results to all its children without using the vendor-supplied trigger code (long story...) using an INSTEAD OF trigger.
My question is: does SQL Server create any kind of relationship between the inserted and deleted tables that I could exploit since the key field is unavailable?
I am trying to avoid having to add a surrogate key to each of the children just for this activity (as there are many M rows in each and no other suitable unique column combinations that span all the child tables).
HI, I am wondering if it is possible to retreive this information without using row count transform. Can I get the # of rows inserted/updated or deleted by destination from the log?
I have a stored procedure that's running a little slower than I would like. I've executed the stored proc in QA and looked at the execution plan and it looks like the problem is in a trigger on one of the updated tables. The update on this table is affecting one row (I've specified the entire unique primary key, so I know this to be the case). Within my trigger there is some code to save an audit trail of the data. One of these statements does an update of the history table based on the inserted and deleted tables. For some reason this is taking 11.89% of the batch cost (MUCH more than any other statement) and within this statement 50% of the cost is for a table scan on inserted and 50% is for a table scan on deleted. These pseudo-tables should only contain one record each though.
Any ideas why this would be causing such a problem? I've included a simplified version of the update below. The "or" statements actually continue for all columns in the table. The same trigger template is used for all tables in the database and none of the others seem to exhibit this behavior as far as I can tell.
Thanks for any help! -Tom.
UPDATE H_MyTable SET HIST_END_DT = @tran_date FROM H_MyTable his INNER JOIN deleted del ON (his.PrimaryKey1 = del.PrimaryKey1) and (his.PrimaryKey2 = del.PrimaryKey2) INNER JOIN inserted ins ON (his.PrimaryKey1 = ins.PrimaryKey1) and (his.PrimaryKey2 = ins.PrimaryKey2) WHERE (his.HIST_END_DT is null) and ((IsNull(del.PrimaryKey1, -918273645) <> IsNull(ins.PrimaryKey1, -918273645)) or (IsNull(del.PrimaryKey2, -918273645) <> IsNull(ins.PrimaryKey2, -918273645)) or (IsNull(del.Column3, -918273645) <> IsNull(ins.Column3, -918273645)))
I want to compare the before and after values of an UPDATEd column using a trigger. I want to know if the value in the column has changed. Simple? No!
As you know, SqlServer puts the before image of the UPDATEd rows into the DELETED virtual table and the after image of the UPDATEd rows in the INSERTED virtual table.
So you would get the before and after data by doing a SELECT on these tables. But here is the problem - how do you join the tables? What if there are >1 rows in these 2 tables (because the UPDATE affected >1 rows) - how do i know which "old"/DELETED rows correspond to which "new"/INSERTED?" Ok - I could join the 2 tables on the primary key, but what if the primary key was updated? In that case the join would not work - the DELETED table would contain the old primary key value and the INSERTED table would contain the new (different) primary key value. In fact, ALL of the columns may have been changed by the UPDATE.
Now, there is another thing to try with triggers - the IF UPDATE ( <columname> ) test. This is designed to tell you if a specified column was UPDATEd by the last UPDATE. However, this will return TRUE for any UPDATE that mentions the column - even if the UPDATE does not change any data! So I cannot determine whether a certain column has had its value changed with this either.
So then you can try another test mentioned in the docs for CREATE TRIGGER - the IF COLUMNS_UPDATED() test. However, this will report that a column has been updated, NOT whether the data has changed as aresult of that UPDATE. So if you UPDATE the value in the column to the same value as it was beforehand (admittedly, a pointless thing to do, but it could happen in some apps), this fuction will say, yes, this column was updated.
So my question remains - how do I know if the data has changed in a column after an UPDATE, using a trigger? Any ideas?
Is there a configuration or a trick to improve the speed of the access to inserted and deleted tables whithin a trigger? Whenever a trigger is called, the access to inserted or deleted constitute approximatly 95% of the execution time.
Is there a way to have access to inserted and to deleted improved other than copying the data to another table?
I have a table that sometimes has modifications to column(s) comprising the primary key [usually "end_date"]. I need to audit changes on this table, and naturally, turned to after triggers.
The problem is that for updates, when the primary key composition changes, I'm not able to relate/join using the primary key - obviously, it no longer matches across INSERTED and DELETED. Now, for a single row update, it's easy to check for updates on PK columns and then deduce what changes were made...
So the real question is: are rows in INSERTED and DELETED always in matching order (1st row in INSERTED corresponds to the 1st row in DELETED...)?
I don't want to put a surrogate key (GUID nor IDENTITY) on the base table if at all possible. INSERT... SELECT from the inserted/deleted tables into a temp table with identity column is fine, and is what I'm currently doing; I would like MVP or product engineer level confirmation that my ordering assumption is correct.
Testing using an identity surrogate key on base table, and selecting from the Ins/del tables, and the temp tables without an order by clause seems to always return in proper order (proper for my purposes). I've tested under SQL 2005 RTM, SP1, SP2, and SP2 "3152".
FYI, I've lost the debate that such auditing is better handled by the application, not the database server...
Aside: why doesn't the ROW_NUMBER() function allow an empty OVER( ORDER BY() ) clause? Will SQL ever expose an internal row_id, at least in the pseudo tables, so we can work around this situation?
I have a publisher database set up for a merge replication. This is using parameterized filter with join filters.
I also have a stored procedure that does deletes & inserts on the table where the parameterized filter is applied to aid in changing a subscriber's eligibility to receive so and so data. I have observed that running the stored procedure takes extraordinarily long and as a result, the log file grows to a size 1.5 - 2.5 times the database size.
At first I reasoned that this might because I had it set up to use precomputed partitions and changing it requires recalculating the partitions. As a test, I turned off the precomputed partitions. Didn't work. I turned on "optimize synchronization" AKA "keep_partition_changes", which normally is not available when you have precomputed partition on, and that didn't work, either.
At this point, I think I can rule out precomputed partitions being a problem here but I'm stumped now what else I should do to reduce the amount of log writes being required. We do need the parameterized filters & join tables, so that can't go.
I would like to wrap the following code in a function and reuse it. I use this code in many triggers.
DECLARE @Action as char(1); SET @Action = (CASE WHEN EXISTS(SELECT * FROM INSERTED) AND EXISTS(SELECT * FROM DELETED) THEN 'U' -- Set Action to Updated. WHEN EXISTS(SELECT * FROM INSERTED) THEN 'I' -- Set Action to Insert. WHEN EXISTS(SELECT * FROM DELETED) THEN 'D' -- Set Action to Deleted. ELSE NULL -- Skip. It may have been a "failed delete". END)
Is it possible to write a function and pass the INSERTED and DELETED logical tables to it?
I have a table with about half a million records, each representing a patient in my county.
Each record has a field (RRank) which basically sorts the patients as to how "unwell" they are according to a previously-applied algorithm. The most unwell patient has an RRank of 1, the next-most unwell has RRank=2 etc.
I have just deleted several hundred records (which relate to patients now deceased) from the table, thereby leaving gaps in the RRank sequence. I want to renumber the remaining recs to get rid of the gaps.
I can see what I want to accomplish by using ROW_NUMBER, thus:
SELECT ROW_NUMBER() Over (ORDER BY RRank) as RecNumber, RRank FROM RPL ORDER BY RRank
I see the numbers in the RecNumber column falling behind the RRank as I scan down the results
My question is: How to convert this into an UPDATE statement? I had hoped that I could do something like:
UPDATE RISC_PatientList_TEMP SET RRank = ROW_NUMBER() Over (ORDER BY RRank);
but the system informs that window functions will only work on SELECT (which UPDATE isn't) or ORDER BY (which I can't legally add).
Hello,I have a form in a web application. When I submit the form it inserts the record into the SQL Server 2005 database. I have an insert trigger. My question is how can i debug the trigger? the trigger then calls a CLR based stored procedure, again how can i debug this CLR stored procedure which gets called by the trigger. Thanks...kindly advice.
OK I am really going nuts here. I have a trigger that will work if I insert a row using SQL MGMT Studio or VS DB explorer, but it will not insert using the tableadapter.update() command.
What is also strange is that I have to execute the query in the VS DB Explorer or SSMSE to get them to fill in the default values (trigger).
No matter what they don't work in the debug application:
Below is the trigger:
Code Snippet
ALTER TRIGGER [dbo].[weight_train_log_InsertTrigger] ON [dbo].[weight_train_log] AFTER INSERT AS BEGIN SET NOCOUNT ON UPDATE [weight_train_log] SET [CreationDate] = GETDATE() FROM inserted WHERE inserted.[GUID] = [weight_train_log].[GUID] END
