Cannot Open User Default Database. Login Failed. (only When IDE Is Open)
Sep 7, 2007
I get the below error only when my IDE open. It connects well when it is found closed.
[SqlException (0x80131904): Cannot open user default database. Login failed.
Login failed for user 'JPASPNET'.]
I could solve this by giving the logged in windows user to impersonate under IIS window > WEBSITE > ASP.NET tab > EDIT CONFIG > APPLICATION tab
But I wish someone could give me the proper solution.
I almost tried all from giving ASPNET user as a administrator to configuring the same in Express management tool.
Environment: XP pro, VWD and SQL Express
View 3 Replies
ADVERTISEMENT
Apr 16, 2008
Hi when i try and open a database in sql server management studio i get the error "Cannot open user default database. Login failed. Login failed for user 'DOMAINUser'. (.Net SqlClient Data Provider)", what can i do to rectify this, i have googled around and still havent found no answers.
View 4 Replies
View Related
Jun 17, 2007
Hey Microsoft: this affects development that will eventually sell a lot of seats on SharePoint Server 2007. If you guys and gals can't straighten out this mess, you can't expect custom solutions with custom web parts. So pay attention for your own good. Yes, SPS 2007 is what this is all about. I've created simpe web parts and deployed them, same VS 2005, but I need local development and debugging for more complex stuff. I'm really disappointed that you have no solution for this problem.
I've seen other posts on this, but the result seems to be the same: if you fix it, it's by accident, not by design.
1. I created a blank ASP.NET web site
2. I added a web part manager
3. I added a web part zone
I get the error described above. I have no idea why SQL Server settings are so screwed up.
I've tried all the stuff in the other posts - security settings, command line installation, etc. None of those worked.
The default template(s) don't copy anything into App_Data, nor create an empty folder. I don't know why that is. I have other web sites working just fine, but they use remote SQL databases, or local ones I created, and didn't need profile management (no forms authentication, no web parts, no web zones).
I've also started out with a local database, using SQL Authentication, later moving it to a remote server, and never had any problems. The SQL Server developer edition and Express seem to work just fine. I can also debug stored procs when the .mdf is in App_Data. So the problem isn't one of connectivity.
What would cause the default screw-up? This would seem to point from all directions to a problem with Visual Studio (2005)? The installation is defalt - perhaps some extras included (copy local), but nothing unusual. AJAX for ASP.net is installed, but not used in the above "default web site" trial. Likewise Syncfusion's tools, which work fine on other developer workstations at this same location, all of which are from the same image (purchased at the same time & imaged). That web parts work on other boxes, running all the same management tools (anti-virus, remote sys admin/sms etc.) makes none of those suspect.
I think Microsoft needs to have a clean problem solution and publish it. SP1 certainly doesn't fix it. What's worse is the stupid, lame error message. "I can't open the default database". Well, what did you try? What do you think the default is? What settings are you using? Why is there no debugging information other than the usual worthless trace information showing it's all deep within the ProviderBase and SqlClient namespace code? How is that supposed to be helpful?
If anyone has anything solid, not guesses, I'd like to know.
View 1 Replies
View Related
Nov 22, 2007
i'm using the Enterpirse library logger to write logs into a database.
When choosing connection string i choose the database i want in the "connection properties" dialog box and
push 'Test connection' button.
everything goes well.
then i open the SQL Server Management studio express and connect to the databse to check some things,
from that point on , when i push the 'Test Connection' button in the Enterprise library i get the error:
"cannot open user default database. Login failed. login failed for user My'server/MyuserName'"
even when i close the sql server manager , it is still stuck - the connection test doesn't work anymore....
it only work when i restart the computer.
why ?
View 3 Replies
View Related
Jun 30, 2006
Hi,
I'm getting this error ever since I attached my VWD Express database to SQL Server Express. I detached the database after using it and closed SQL Server but as soon as I tried to run my application again in VWD I got...
Cannot open user default database. Login failed.Login failed for user 'xxxxxxxASPNET'.
I have tried attaching and detaching the database again in SQL Server with the 'Close Connections' check box ticked but still no joy. I have checked out all other posts on this subject but can't seem to find an answer that works for me.
Does SQL Server Express do something to users / permissions when attaching databases? It's all way above my head!
My connection string is as follows...
<add name="DatabaseConnectionString1" connectionString="Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|Database.mdf;Integrated Security=True;User Instance=True" providerName="System.Data.SqlClient"/>
View 2 Replies
View Related
Aug 29, 2006
Hey,I renamed a database, and it happened to be my default; so I basically screwed myself, because I can't change it through script (doesn't exist or you don't have permissions). What can I do? Thanks.
View 4 Replies
View Related
Jun 3, 2004
Yesterday was not my best day. I disconnected my database to make a copy of it and forgot to reconnect it before closing SQL Server 2000.
Now when I try ot access the database I get message.
Cannot Open User Default Database. Login Failed
Is there a way to attach the database again or a work around for this?
Thanks in advance for your help!
View 2 Replies
View Related
Jun 13, 2008
hi to all,
I am new to Sqlserver. in my machine i installed sqlserver2000.i created/registered a new server with sql authentication. but when i connecting it shows the login failed and i am unable to connect my database.after that i edited the server registration information as windows authentication. now it works well. what to do? how to tactic this problem? thanks in advance..
View 11 Replies
View Related
Feb 18, 2008
Hello,
I'm using Visual C# 2008 Express to connect to the Northwind database in SQL Server 2005 Express. My Visual C# project which worked yesterday now yields an exception on build.
The error message is:
Cannot open user default database. Login failed.
Login failed for user 'Plesva-PCPlesva'.
The connection string is:
Data Source=.SQLEXPRESS;AttachDbFilename="C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDataNorthwnd.mdf";Integrated Security=True;Connect Timeout=30;User Instance=True
In SQL Server Management Studio Express, I can see that the default database for this Login is master. In the master database, the user mapped to this Login is 'Plesva-PCPlesva'. The database role membership for this Login in master is 'public'.
Does this have something to do with user instances? I'm not familiar with that topic, but have seen a few posts here and elsewhere that alluded to it. I couldn't make heads or tails of what they were talking about.
Thank you.
View 10 Replies
View Related
Apr 28, 2007
Cannot open user default database. Login failed.
Login failed for user '[machine name]ASPNET'.I'm working in VS 2005 with a starter kit. I close VS and open an MDF file in SQL Server 2005 Management Studio to modify a table. I attach the file, change a data type, then detach the file. When I go back to VS and try to run the program, I get this error. Everything runs normally before I bring the file into Management Studio. It is not a permissions issue. Does SQL Server put some kind of lock on the file? This must be a fairly common problem. A developer will sometimes want to modify an .mdf file. How does he do that and then run his program? Thank you for any suggestions I can try.
View 5 Replies
View Related
Dec 1, 2006
Hi,
I have installed SQL Server 2005 Express edition and when i try to run the web site as http://127.0.0.1/SiteName/Login.aspx. I am using default SQL Provider.
Can anyoone please help me??? i was struck here from last two days.
System.Data.SqlClient.SqlException: Cannot open user default database. Login failed.
Login failed for user 'XXXXXXASPNET'.
Regards,
Pradeep.
View 8 Replies
View Related
Feb 21, 2007
Hi
I am developing an asp.net application in Visual Studio 2005. The application was displaying in the web browser as expected but now i get the following error appear. Server Error in '/EMPRINT_STREETSIGNS1' Application.
Cannot open user default database. Login failed.
Login failed for user 'JEREMYLINTEROwner'.
Description: An
unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the
error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: Cannot open user default database. Login failed.
Login failed for user 'JEREMYLINTEROwner'.
Source Error:
An unhandled exception was generated during the execution of the
current web request. Information regarding the origin and location of
the exception can be identified using the exception stack trace below.
Stack Trace:
[SqlException (0x80131904): Cannot open user default database. Login failed.
Login failed for user 'JEREMYLINTEROwner'.]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +171
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +199
System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +2300
System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK) +34
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +606
System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +193
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +501
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +429
System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +70
System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +510
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +85
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +89
System.Data.SqlClient.SqlConnection.Open() +159
System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +118
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +139
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, String srcTable) +83
System.Web.UI.WebControls.SqlDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments) +1657
System.Web.UI.DataSourceView.Select(DataSourceSelectArguments arguments, DataSourceViewSelectCallback callback) +13
System.Web.UI.WebControls.DataBoundControl.PerformSelect() +140
System.Web.UI.WebControls.BaseDataBoundControl.DataBind() +68
System.Web.UI.WebControls.GridView.DataBind() +5
System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound() +61
System.Web.UI.WebControls.CompositeDataBoundControl.CreateChildControls() +67
System.Web.UI.Control.EnsureChildControls() +97
System.Web.UI.Control.PreRenderRecursiveInternal() +50
System.Web.UI.Control.PreRenderRecursiveInternal() +171
System.Web.UI.Control.PreRenderRecursiveInternal() +171
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +5731
Visual Studio produces the same error when i try to connect to the
database unless i change the server to './SQLEXPRESS'.
why is the default user being changed to './owner' and how can i stop
this from happening?
Thank you
View 1 Replies
View Related
Jan 5, 2007
Hi,
I got this application system having SQLExpress as database (ABCSystem.mdf). I'm connecting to the database thru connection string specifying database path in App.config.
At the same time, I got two paths for the mdf files. The first one is the path for my database project while the second one is the path to conduct testing. (This means that I got identical ABCSystem.mdf in two paths)
1) C:Program FilesCompany ABCABCDatabaseProject
2) C:Program FilesCompany ABC LimitedABCSystemDatabase
In my development machine, I can run my application where database path is testing path (number 2).
When I tried to copy the ABCSystem.mdf and ABCSystem_log.LDF and my application program files to another PC to test, I got the subject error message. (note that I copy program files under directory "C:Program FilesCompany ABC LimitedABCSystem" and mdf files under "C:Program FilesCompany ABC LimitedABCSystemDatabase")
I try to edit path from database testing path to database project path in app.config, run the application, and notice that it is running OK.
What seems to cause the problem? Coz I need the database in the testing path which is "C:Program FilesCompany ABC LimitedABCSystemDatabase" AND NOT "C:Program FilesCompany ABCABCDatabaseProject".
Thanks alot for your kind attention.
View 2 Replies
View Related
Aug 14, 2006
I work with Microsoft visual studio 2005.
i get data from a table by ADO.NET :
SqlConnection sqlConn = new SqlConnection(strConnectionString);
sqlConn.Open();
.....
it works fine.
but when i open the SQL Server 2005 express edition and connect to the server (inside the same computer) to check something and then get back to the VS and run the code again ,the Open() function fails with the exception :
{"Cannot open user default database. Login failed.
Login failed for user 'DOMAIN\asaf_a'."
disconnecting the server doesn't help and even closing the SQL Server 2005 application doesn't help.
Only restarting the computer enables the Open() command to work again.
Why ?
View 3 Replies
View Related
Mar 3, 2008
Cannot open user default database. Login failed.Login failed for user
'NT AUTHORITYNETWORK SERVICE'. Description:
An unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the error and
where it originated in the code. Exception Details:
System.Data.SqlClient.SqlException: Cannot open user default database. Login
failed.Login failed for user 'NT AUTHORITYNETWORK SERVICE'. I have This Error When i try to log into My online web site, i have no idea how to fix it,one day it was working and the next it wasnt, is there any way to find out what database the default is and if it's either incorrect or not present change the web.config in a way that will make my system work. i have the NT Authority/Network Service in my Server Properties Permissions, its given the type login and is granted Connect SQL by sa i have 3 colder copies of the web site on my server my question is, how would i use of of these to restore the original site configuration is there a way to restore the original configuration to undo whatever it is i've done to break the system ChrisStressed
View 3 Replies
View Related
Apr 25, 2007
Hi, I'm new to SQL Express 2005.
I found information regarding : "Cannot open user default database. Login failed."on this forum but I think that in my case it's a bit different issue.
I have a website (ASP.NET 2.0) accessing DB, in the mean time Windows Service tries to update some data in the same DB (Service runs as NT AUTHORITYLOCAL SYSTEM). The second connection is rejected: "Cannot open user default database. Login failed.Login failed for user ....".
Problem occurs only when both: service and website are running at the same time. So service and website are running without problems when they are connecting DB exclusively.
My connection string is:
"Data Source=.SQLEXPRESS;AttachDbFilename="|DataDirectory|spider-lab.mdf";Integrated Security=True;User Instance=True"
I would be grateful if you can help me
View 1 Replies
View Related
Jul 21, 2015
Running a report on sqlserver RS 2008 R2 that uses a data source that looks at a database on a sql express 2012 server.
I can run the report in preview mode from bits on the sql 2008 r2 server.
I have tested the connection of the  deployed data source on the sql 2008 R2 reporting services web page and connection has been successful.
I can logon to sql express 2012 using  management studio and logon as the user and access the database run stored procedures etc.
windows server 2003, sql server 2008 R2 reporting services server.
windows server 2012 sql express 2012 data source database location.
View 13 Replies
View Related
Jan 15, 2004
Hi,
I'm sorry if this is simple, I'm no DBA but have been tasked with solving this problem...
We have a website that connects via ODBC to SQL Server (2k sp1) and at the moment I am getting back about every other time:
Microsoft OLE DB Provider for ODBC Drivers error '80004005'
[Microsoft][ODBC SQL Server Driver][SQL Server]Cannot open user default database. Login failed.
So this is NOT happening every single time. Now I have seen Microsoft KB - 307864 and I can see that none of the databases are marked as suspect, the database I am trying to connect to does exist and is attached and, I have run the command to switch the database to multi-user mode.
The probable cause of this problem is that a while ago we had a hard-drive failure and I was forced to reattach some old datafiles (mdf,ldf) as the database. This seemed ok and I can view data etc in enterprise manager no problem.
I have checked for orphaned users and the user I am logging in with from the webpage is not listed.
So does anyone have a clue as to why this is happening, and more frustratingly for me, why is it only happening some of the time.
Thanks for your help, appreciated.
James.
View 9 Replies
View Related
Feb 4, 2008
I Guys
I am trying to create an application that writes data to a SQL database (studio express).
The application works fine but as soon as I open the table with the SQL server management studio express the application does not work any more displaying the following message:
€œCannot open user default database. Login failed. Login failed for user€¦€?
If I siwtch off and on the computer the problem disappear till the table will be open with the database management studio express!!!!!
How can I solve this annoying problem?
Cheers
View 5 Replies
View Related
Apr 25, 2006
I have created an app which use sqlserver exrpress and works fine. I have now craeted a authentication page login.aspx.
I have added users successfully to the asp.net configuartion via the web site admin tool.
When I go to login using my page I get the Cannot open default database.Login failed. Login failed for user servetaspnet.
I have looked at the asonetdb in sql server management studio and the serverasp net is set up on the database.
Can anyone suggeste what I ma doing wrong or where I might see a work through of the problem.
Thanks
Frank
View 3 Replies
View Related
Mar 18, 2007
hi,
so i have a new box and I'm trying to get my websites and SQL Server 2005 Standard Edition working on it, but the pages give me the following error when I try to load them:
"Cannot Open Database "XXXX" requested by login. The login failed. Login failed for user 'xxx'"
Everything seems exactly the same settings and user-wise from my old box to my new one, but nevertheless everything I've tried gives me the same error.
I've tried creating new users in SQL Server and giving them appropriate permissions to my database. I've even tried just using the built in 'sa' account. Nothing seems to change the error, except when I give it the incorrect password then it just says 'login failed'
This leads me to believe that i'm successfully logging into the SQL Server, but it doesn't want to give me access to the database I'm requesting access too. But "apparently" the account i'm using should have access to the database. If nothing else the 'sa' account should, but that didn't work either.
I'm stumped. Any ideas?
View 6 Replies
View Related
Oct 27, 2004
Hi,
Im getting this error when attempting to retrieve data from an sql database.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: Cannot open database requested in login 'projectAllocations'. Login fails. Login failed for user 'sa'.
Source Error:
Line 13: objConn = New SqlConnection( "Server=LAB303-066NETSDK; Database=projectAllocations; User ID=sa;Password=mypassword")
Line 14: objCmd = New SqlCommand("SELECT * FROM project_descriptions", objConn)
Line 15: objConn.Open()
Line 16: objRdr = objCmd.ExecuteReader()
Line 17: While objRdr.Read()
Source File: C:finalyearproject2sample.aspx Line: 15
Please Help!! Im a beginner to this, so if anyone knows the answer, take baby steps when explaining. Thanks
View 3 Replies
View Related
Jul 27, 2005
Been looking through the forums for a solution to this problem.I already tried granting access through statements such as:exec sp_grantloginaccess N1'machineNameASPNET'But they don't seem to work.. i vaguely remember seeing somewhere a DOS command line statement that grants access to the ASPNET_WP and that fixed my problem before on another computer.. but this is a new computer and i forgot to write down the command.Can anyone help explain and propose a solution to my problem. Many thanxs.
View 9 Replies
View Related
Dec 19, 2003
I am using the MSDE to connect to my ASP.NET application. I get this error after clicking the login button of my login page. Anyone know why this would happen?
Thanks for any help,
Cannot open database requested in login 'DataSQL'. Login fails. Login failed for user 'serverASPNET'.
View 5 Replies
View Related
Aug 13, 2006
hi:
I got the problem, which lots of people might encounter before.
In my case, I use login control and sqlexpress to build a login page.
when password & user name were entered. It gave me:
"Cannot open user default database, login fails"
The solution given by msdn is:
SQL Server 2005You can use the sqlcmd utility to change the default database in SQL Server 2005. To do this, follow these steps: 1.Click Start, click Run, type cmd, and then press ENTER. 2.Use one of the following methods, depending on the kind of authentication that the SQL Server login uses: €¢If
the SQL Server login uses Microsoft Windows authentication to connect
to the instance, type the following at the command prompt, and then
press ENTER:sqlcmd €“E -S InstanceName €“d master€¢If
the SQL Server login uses SQL Server authentication to connect to the
instance, type the following at the command prompt, and then press
ENTER: sqlcmd -S InstanceName -d master -U SQLLogin -P PasswordNote InstanceName is a placeholder for the name of the SQL Server 2005 instance to which you are connecting. SQLLogin is a placeholder for the SQL Server login whose default database has been dropped. Password is a placeholder for the SQL Server login password.3.At the sqlcmd prompt, type the following, and then press ENTER: ALTER LOGIN SQLLogin WITH DEFAULT_DATABASE = AvailDBNameNote AvailDBName is a placeholder for the name of the existing database that can be accessed by the SQL Server login in the instance.4.At the sqlcmd prompt, type GO, and then press ENTER.
I wonder what are InstanceName, SQLLogin & AvailDBName. It would be nice if someone can give me a specific example, since I am not sure how to type them in a command line. :)
View 1 Replies
View Related
Apr 18, 2008
Hi I have asp.net2 app using SQLExpress which works fine in VS2005.
When I compile it and try to run it from IIS on the same machine using the same
sql server database with:
connectionstring="server=.SQLEXPRESS;Database=abc.mdf;Trusted_Connection=yes"/>
I get the following error.
Cannot open database abc.mdf requested by login. The login failed. Login failed for user 'machinenameASPNET'
Any help much appreciated
Thanks
David
View 2 Replies
View Related
Sep 20, 2007
Hi all,
Iam getting this error
System.Data.SqlClient.SqlException: Cannot open database "XYZ" requested by the login. The login failed.Login failed for user 'xyz-abcASPNET'.
when trying to open the page....
http://localhost:1807/projectname/WebFormName.aspx
as
http://localhost/projectname/WebFormName.aspx
Couldnt figure out the solution.Please help
Soujanya
View 2 Replies
View Related
Dec 15, 2006
Hi,
I know that there have been numerous posts on this topic, however none of the suggestions seems to resolve my problem. I am running a ASP 2.0 web application locally using SQL server 2005 express, but after using SQL Server Management Studio to browse the database of the application i get the following error everytime i log into the website:
Cannot open user default database. Login failed. Login failed for user '<<machine name>>ASPNET'
All i had done is attach then detatch the database in SSMS and it seems to have changed the access permissions somehow.I have ensured that the ASPNET user has full permissions (server roles and User mapping) in SSMS and i have granted the ASPNET user full rights to the ASPNETDB.MDF and log file, but i still get the same error.
Its really urgent i sort this problem out as soon as possible, so if anyone has tackled this problem before please help. Ideally i don't want to have to reinstall sql server, but if that is the only option and it will definitely fix the problem then i will.
Thanks,
Jack
View 3 Replies
View Related
May 14, 2008
Cannot open database "QuoteSystem" requested by the login. The login failed.Login failed for user 'NT AUTHORITYNETWORK SERVICE'.
Last time I recieved this error I had to add ASPNet, NTAuthority, and myWebSiteUsers USERS under the database properties-->permissions setting for the specific database I am trying to access with the website but this database(QuoteSystem) does not lists any of these objects so I can add them. Does anybody know what I have to do to fix this?
I am using SQL Server 2005.
View 7 Replies
View Related
Aug 10, 2005
Please, can anyone tell me why I am getting the undermentioned error message when I develop my application as an IIS Site in Visual Web Developer 2005 Express ? I have already developed and successfully tested it as a 'FileSystem Web Site' .I am using SQLSErver Express 2005 edition and have which I have installed along with the Northwind database as per the download instructions. My IIS software is version 5.1 which I have checked and it is configured to allow Integrated Windows Authentication. the relevant code is (1) web.config file connection strings
<connectionStrings>
<add name="NorthwindConnectionString"
connectionString="Data Source=.sqlexpress;Initial Catalog=Northwind;Integrated Security=True"
providerName="System.Data.SqlClient"/>
</connectionStrings>(2) the grid view control and sqldatasource
<asp:GridView ID="GridView1" runat="server" AutoGenerateColumns="False" DataKeyNames="CategoryID"
DataSourceID="SqlDataSource1">
<Columns>
<asp:BoundField DataField="CategoryID" HeaderText="CategoryID" InsertVisible="False"
ReadOnly="True" SortExpression="CategoryID" />
<asp:BoundField DataField="CategoryName" HeaderText="CategoryName" SortExpression="CategoryName" />
<asp:BoundField DataField="Description" HeaderText="Description" SortExpression="Description" />
</Columns>
</asp:GridView>
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:NorthwindConnectionString %>"
SelectCommand="SELECT [CategoryID], [CategoryName], [Description] FROM [Categories]">
</asp:SqlDataSource>This is the full error message and details:
Server Error in '/sqlservertest' Application.
Cannot open database "Northwind" requested by the login. The login failed.Login failed for user 'JERRY-3C9615BAAASPNET'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Cannot open database "Northwind" requested by the login. The login failed.Login failed for user 'JERRY-3C9615BAAASPNET'.Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
[SqlException (0x80131904): Cannot open database "Northwind" requested by the login. The login failed.
Login failed for user 'JERRY-3C9615BAAASPNET'.]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +684883
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +207
System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +1751
System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK) +32
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +601
System.Data.SqlClient.SqlInternalConnectionTds..ctor(SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +159
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +346
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +445
System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66
System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +304
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +85
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.SqlClient.SqlConnection.Open() +111
System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +121
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +137
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, String srcTable) +83
System.Web.UI.WebControls.SqlDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments) +1837
System.Web.UI.DataSourceView.Select(DataSourceSelectArguments arguments, DataSourceViewSelectCallback callback) +17
System.Web.UI.WebControls.DataBoundControl.PerformSelect() +129
System.Web.UI.WebControls.BaseDataBoundControl.DataBind() +70
System.Web.UI.WebControls.GridView.DataBind() +4
System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound() +82
System.Web.UI.WebControls.CompositeDataBoundControl.CreateChildControls() +69
System.Web.UI.Control.EnsureChildControls() +87
System.Web.UI.Control.PreRenderRecursiveInternal() +41
System.Web.UI.Control.PreRenderRecursiveInternal() +161
System.Web.UI.Control.PreRenderRecursiveInternal() +161
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1787
Version Information: Microsoft .NET Framework Version:2.0.50215.312; ASP.NET Version:2.0.50215.312
View 1 Replies
View Related
May 9, 2008
Hi,
I just installed Visual web developper 2008 express with all options including SQL srvr express 2005!
This is from default iso image on the official website.
I create my first project and when I want to do ASP.NET configuration from web site menu, i got this error:
"Cannot open database "aspnetdb" requested by the login. The login failed."
I am just trying to learn here so i even did not create any dB or something, it is 1st time I run configuration to add security roles and users for testing!
I also un-installed all and re-installed, still the same...
pleas help and give me details as i am new.
kind regards,Golgot
View 12 Replies
View Related
Jan 7, 2008
Im running sql server 2005 and trying to connect from dreamweaver. What is causing this problem?
View 2 Replies
View Related
Mar 27, 2008
Error!!! 1>Cannot open database "intranet" requested by the login. The login
failed.Login failed for user 'RAGHAVEN-71AF9BASPNET'. Error!!! 2>
An error has occurred while establishing a connection to the server.
When connecting to SQL Server 2005, this failure may be caused by the fact that
under the default settings SQL Server does not allow remote connections.
(provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL
Server) These both errors r coming simultaneously when start to debug only when i tried to retrive data from database ,
from past two days not able to work on database,plz
help me in solving this ,i tried everything what i know and even on
experts advice from recommended websites, forums and on google search..
View 4 Replies
View Related
