I just upgraded from SQL 7.0 to 2000. I know I have an error with the
CAST and CONVERT functions I used in some views. Anyway, is there a
sp I can run that will run all my views and give me back a list of
those which have an error instead of going through each view one by
one?
Thanks.
Sherry
I get errors when I check out an SSIS package from source control (both Source Safe and TFS) relating to the connection objects where I was not the original developer who checked it in. Is there a solution to this other than altering the connection loginpassword for every connection object in the package before deploying?
View 4 Replies View RelatedI am having problems accessing DTS after install SP4 and was wonderingif someone could offer some advice.I installed SP4 and got the following error after it competed.Unable to write to response file 'U:WINDOWSsetup.iss' duringrecording. Please ensure enough space is available on target drive.I got the error 3 times (3 pop-ups).After the install I could not access DTS. I was getting 2 errorpop-ups.1. 'rebbrui.rll is missing'2. Snap-In failed to initialize: Meta Data ServicesI read the groups and tried several things.I tried to reinstall MDAC and it did not help.I tried to register several dlls and it did not help.I found this post and it seemed to help.Repair Script:http://www.experts-exchange.com/Dat...Q_21445589.htmlI was then able to access DTS using the profile (which is anadministrator) whichI used to install SP4 and run the above repair script. However, noother profile can open or run DTS.I tried running the repair script under the other profiles and it didnot help.I was receiving 2 errors for the other profiles. I only documented oneand I am no longer getting the other. Now it just goes to a whitescreen and hangs.1st error:DTS Designer ErrorThe specified module could not be found.2nd error:?????I tried reinstalling client tools and SP4 and it did not help. Now Iget one additional error.Before I can expand the server node in enterprise manager I get thefollowing error.Snap-in failed to initializeName: Meta Data ServicesCLSID: {1DBA4DD4-EB97-4FD2-AB80-9D0D4BA74034}Does anyone have a suggestion on how I might fix this?I am running SQL Server 2000 Enterprise on Windows 2000 Server with 4GB RAM.I did notices that someone has set the /3GB switch. I know this is notsupported on this OS but it was not causing major problems before theupgrade. Could it be the culprit?
View 1 Replies View RelatedFollowing upgrade to SSRS2005, Reporting Services worked EXCEPT from within applications or from scheduled jobs. Running reports from application-generated URL€™s produced the following error: €˜An internal error occurred on the report server. See the error log for more details€™. These same reports, however, ran perfectly from within SSRS. After running them once from Reporting Services, they subsequently run without problem when called by applications or jobs.
Examples of these errors include the following (stack traces available if needed):
ReportingServicesService!runningjobs!13!5/27/2007-01:57:23:: i INFO: Adding: 1 running jobs to the database
ReportingServicesService!chunks!f!05/27/2007-01:58:34:: e ERROR: LockSnapshotForUpgrade: System.Data.SqlClient.SqlException: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
ReportingServicesService!chunks!1a!05/27/2007-01:58:34:: e ERROR: GetChunkPointerAndLength: System.Data.SqlClient.SqlException: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
ReportingServicesService!chunks!11!05/27/2007-01:58:34:: e ERROR: ### SnapshotConverter(00d68151-85e5-4669-a0de-28ed81bd091c, True), System.Data.SqlClient.SqlException: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
Log entries below correspond to the following attempts to run a specific report.
ENF_Comprehensive_Report 5/31/2007 9:43:37 AM rsInternalError
(one of many user attempts to run from app after upgrade)
ENF_Comprehensive_Report 5/31/2007 10:50:57 AM rsSuccess
(first successful run after upgrade; run from within SSRS)
ENF_Comprehensive_Report 5/31/2007 11:09:59 AM rsSuccess
(first successful run by user from application)
It appears that after the upgrade Reporting Services was attempting to use non-existent or invalid chunks and snapshots to satisfy application or job originated requests. When first called from within SSRS, the old chunk was accessed but then appears to have been ignored, with subsequent calls running without a chunk. Our workaround for the problem was to manually run each of our 200+ reports from within SSRS to €˜initialize€™ them for applications and jobs.
Typical Application Request Failure for report:
w3wp!library!a!5/31/2007-09:43:22:: i INFO: Cleaned 0 batch records, 0 policies, 4 sessions, 0 cache entries, 5 snapshots, 46 chunks, 0 running jobs, 0 persisted streams
w3wp!library!a!05/31/2007-09:43:37:: i INFO: Call to RenderFirst( '/Enforcement/Historical/ENF_Comprehensive_Report' )
w3wp!chunks!a!05/31/2007-09:43:37:: i INFO: Returning old chunk for: (24788648-41c5-43d8-ba6b-409662211a37, 'CompiledDefinition', 0)
w3wp!runningjobs!6!5/31/2007-09:44:29:: i INFO: Adding: 1 running jobs to the database
w3wp!chunks!a!05/31/2007-09:45:37:: e ERROR: ### SnapshotConverter(24788648-41c5-43d8-ba6b-409662211a37, True), System.Data.SqlClient.SqlException: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
ßstack trace entries here€”>
w3wp!library!a!05/31/2007-09:45:37:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: An internal error occurred on the report server. See the error log for more details., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: An internal error occurred on the report server. See the error log for more details. ---> System.Data.SqlClient.SqlException: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
ßstack trace entries here€”>
--- End of inner exception stack trace ---
w3wp!webserver!a!05/31/2007-09:45:37:: e ERROR: Reporting Services error Microsoft.ReportingServices.Diagnostics.Utilities.RSException: An internal error occurred on the report server. See the error log for more details. ---> Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: An internal error occurred on the report server. See the error log for more details. ---> System.Data.SqlClient.SqlException: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
First run of report from within Reporting Services following upgrade:
w3wp!library!19!05/31/2007-10:50:30:: Call to GetPermissionsAction(/Enforcement/Historical/ENF_Comprehensive_Report).
w3wp!library!19!05/31/2007-10:50:30:: Call to GetSystemPropertiesAction().
w3wp!library!19!05/31/2007-10:50:30:: Call to GetPropertiesAction(/Enforcement/Historical/ENF_Comprehensive_Report, PathBased).
w3wp!chunks!19!05/31/2007-10:50:30:: i INFO: Returning old chunk for: (24788648-41c5-43d8-ba6b-409662211a37, 'CompiledDefinition', 0)
w3wp!library!1!05/31/2007-10:50:31:: Call to GetSystemPermissionsAction().
w3wp!library!1!05/31/2007-10:50:31:: Call to GetPropertiesAction(/Enforcement/Historical/ENF_Comprehensive_Report, PathBased).
w3wp!library!e!05/31/2007-10:50:31:: Call to GetSystemPropertiesAction().
w3wp!library!1!05/31/2007-10:50:56:: Call to GetPermissionsAction(/Enforcement/Historical/ENF_Comprehensive_Report).
w3wp!library!6!05/31/2007-10:50:56:: Call to GetSystemPropertiesAction().
w3wp!library!6!05/31/2007-10:50:56:: Call to GetPropertiesAction(/Enforcement/Historical/ENF_Comprehensive_Report, PathBased).
w3wp!library!6!05/31/2007-10:50:56:: Call to GetSystemPermissionsAction().
w3wp!library!6!05/31/2007-10:50:56:: Call to GetPropertiesAction(/Enforcement/Historical/ENF_Comprehensive_Report, PathBased).
w3wp!library!6!05/31/2007-10:50:56:: Call to GetSystemPropertiesAction().
w3wp!library!1!05/31/2007-10:50:57:: i INFO: Call to RenderFirst( '/Enforcement/Historical/ENF_Comprehensive_Report' )
w3wp!webserver!1!05/31/2007-10:50:58:: i INFO: Processed report.
Subsequent application request for same report:
w3wp!library!11!05/31/2007-11:09:59:: i INFO: Call to RenderFirst( '/Enforcement/Historical/ENF_Comprehensive_Report' )
w3wp!webserver!11!05/31/2007-11:10:00:: i INFO: Processed report. Report='/Enforcement/Historical/ENF_Comprehensive_Report', Stream=''
Environment: 32-bit WK3 Enterprise R2 SP2 with single instance of SQL2000 SP3 hosting SSRS2005 SP2 metadata; IIS running in 6.0 isolation mode; separate dedicated IIS server; dedicated domain user accounts for service accounts and application pools. Over 200 reports deployed, half of which are run by users from within applications.
SSRS upgrade process: backup up existing databases, settings, keys; uninstall SSRS2000; perform €˜files only€™ install of SSRS2005 to existing SQL2000 instance; manually configure SSRS2005 and IIS; upgrade reporting services databases.
This is a followup of a previous posting to this forum 30-May 6:28 pm UTC: Problems following SSRS database upgrade.
Fellow database developers,I would like to draw on your experience with views. I have a databasethat includes many views. Sometimes, views contains other views, andthose views in turn may contain views. In fact, I have some views inmy database that are a product of nested views of up to 6 levels deep!The reason we did this was.1. Object-oriented in nature. Makes it easy to work with them.2. Changing an underlying view (adding new fields, removing etc),automatically the higher up views inherit this new information. Thismake maintenance very easy.3. These nested views are only ever used for the reporting side of ourapplication, not for the day-to-day database use by the application.We use Crystal Reports and Crystal is smart enough (can't believe Ijust said that about Crystal) to only pull back the fields that arebeing accessed by the report. In other words, Crystal will issue aSelect field1, field2, field3 from ReportingView Where .... eventhough "ReportingView" contains a long list of fields.Problems I can see.1. Parent views generally use "Select * From childview". This meansthat we have to execute a "sp_refreshview" command against all viewswhenever child views are altered.2. Parent views return a lot of information that isn't necessarilyused.3. Makes it harder to track down exactly where the information iscoming from. You have to drill right through to the child view to seethe raw table joins etc.Does anyone have any comments on this database design? I would love tohear your opinions and tales from the trenches.Best regards,Rod.
View 15 Replies View RelatedWhich is more efficient? One large view that joins >=10 tables, or a few smaller views that join only the tables needed for individual pages?
View 1 Replies View RelatedI recently updated the datatype of a sproc parameter from bit to tinyint. When I executed the sproc with the updated parameters the sproc appeared to succeed and returned "1 row(s) affected" in the console. However, the update triggered by the sproc did not actually work.
The table column was a bit which only allows 0 or 1 and the sproc was passing a value of 2 so the table was rejecting this value. However, the sproc did not return an error and appeared to return success. So is there a way to configure the database or sproc to return an error message when this type of error occurs?
I have a parent package that calls child packages inside a For Each container. When I debug/run the parent package (from VS), I get the following error message: Warning: The Execution method succeeded, but the number of errors raised (3) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
It appears to be failing while executing the child package. However, the logs (via the "progress" tab) for both the parent package and the child package show no errors other than the one listed above (and that shows in the parent package log). The child package appears to validate completely without error (all components are green and no error messages in the log). I turned on SSIS logging to a text file and see nothing in there either.
If I bump up the MaximumErrorCount in the parent package and in the Execute Package Task that calls the child package to 4 (to go one above the error count indicated in the message above), the whole thing executes sucessfully. I don't want to leave the Max Error Count set like this. Is there something I am missing? For example are there errors that do not get logged by default? I get some warnings, do a certain number of warnings equal an error?
Thanks,
Lee
When attemping to install SQL 2005 Express using the following command line arguments
/qb UPGRADE=SQL_Engine INSTANCENAME=MY_INSTANCE
or
/qb UPGRADE=SQL_Engine INSTANCENAME=MY_INSTANCE SECURITYMODE=SQL SAPWD=MY_PASSWORD
the following error occurs.
Your upgrade is blocked. For more information about upgrade support, see the "Version and Edition Upgrades" and "Hardware and Software Requirements" topics in SQL Server 2005 Setup Help or SQL Server 2005 Books Online.
Edition check:
Your upgrade is blocked because of edition upgrade rules. For more information about edition upgrades, see the Version and Edition Upgrades topic in SQL Server 2005 Setup Help or SQL Server 2005 Books Online.
The following version and editions have been verified.
1. .NET 2.0 installed
2. Windows XP SP2
3. MSDE 8.00.2039(SP4)
4. all MSDE databases are owned by sa
5. Instance and SQLAgent running under user that is member of Administrators
What are the possible reasons this error is occurring?
Hello.
Newbie here. I've only been using SQL for about a year now and have some minor questions about sql objects that reference other objects.
We have some views which reference other views in the joins. I will call one the primary view and the one being referenced in the joins as the secondary view.
Recently we made changes to the secondary view.
After which the primary views which referenced it would not work because of this change and had to be 'refreshed' by using drop/create scripts which essentially just dropped it and recreated the exact same view. I do not recall the exact error message that was returned other than it seemed to suggest that it could no longer see the secondary view since it had been changed. Nothing in the primary view was changed in any way, just the secondary.
Some here where I work have suggested off hand that this was a recompile of the primary view because the contents of the secondary changed.
My questions are:
1. Exactly why did this happen and is there a proper name for it when it does?
2. The same problem does not seem to occur when we have stored procedures referencing views in the joins which had just been changed. Why is that?
Thanks for any help on the matter. I greatly appreciate it.
Hello,
to make a report easier I'm developing it using a view of joined views of joined views.
Is there any significant performance penalty as opposed to just having one big select?
Cheers.
Starwin writes "when i execute DBCC CHECKDB, DBCC CHECKCATALOG
I reveived the following error.
how to solve it?
Server: Msg 8909, Level 16, State 1, Line 1 Table error: Object ID -2093955965, index ID 711, page ID (3:2530). The PageId in the page header = (34443:343146507).
. . . .
. . . .
CHECKDB found 0 allocation errors and 1 consistency errors in table '(Object ID -1635188736)' (object ID -1635188736).
CHECKDB found 0 allocation errors and 1 consistency errors in table '(Object ID -1600811521)' (object ID -1600811521).
. . . .
. . . .
Server: Msg 8909, Level 16, State 1, Line 1 Table error: Object ID -8748568, index ID 50307, page ID (3:2497). The PageId in the page header = (26707:762626875).
Server: Msg 8909, Level 16, State 1, Line 1 Table error: Object ID -7615284, index ID 35836, page ID (3:2534). The PageId in the page heade"
We have a server instance on SQL Server 2005 SP2 build 3042. We have a 32 bit x86 server. We attempted to upgrade to SP2 build 3054 KB934458. And we got the following error as stated in the Summary.txt file.
Code Snippet
**********************************************************************************
Product Installation Status
Product : SQL Server Database Services 2005 (MSSQLSERVER)
Product Version (Previous): 3042
Product Version (Final) :
Status : Failure
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQL9_Hotfix_KB934458_sqlrun_sql.msp.log
Error Number : 29538
Error Description : MSP Error: 29538 SQL Server Setup did not have the administrator permissions required to rename a file: e:SQLDatamssqlsystemresource1.ldf. To continue, verify that the file exists, and either grant administrator permissions to the account currently running Setup or log in with an administrator account. Then run SQL Server Setup again.
----------------------------------------------------------------------------------
The client tools and workstation components were successfully installed. The server is still reporting build 3042.
Here is the portions of the HotFix.log file.
Code Snippet
05/12/2008 09:19:09.041 Copy Engine: Creating MSP install log file at: C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQL9_Hotfix_KB934458_sqlrun_sql.msp.log
05/12/2008 09:19:09.072 Registry: Opened registry key "SoftwarePoliciesMicrosoftWindowsInstaller"
05/12/2008 09:19:09.103 Registry: Cannot read registry key value "Debug"
05/12/2008 09:21:29.382 MSP Error: 29538 SQL Server Setup did not have the administrator permissions required to rename a file: e:SQLDatamssqlsystemresource1.ldf. To continue, verify that the file exists, and either grant administrator permissions to the account currently running Setup or log in with an administrator account. Then run SQL Server Setup again.
05/12/2008 09:22:33.678 MSP returned 1603: A fatal error occurred during installation.
05/12/2008 09:22:33.724 Registry: Opened registry key "SoftwarePoliciesMicrosoftWindowsInstaller"
Any help would be appreciated.
Hi,
We are performing a SQL 2005 SP1 upgrade from SQL 2000 on our Windows 2003 SP1 Standard Edition.
When we run the upgrade, we got a error "Upgrade Advisor Return -1" as a pop-up window.
When we run the Upgrade Advisor separately, we get this error :
===================================
Common Language Runtime detected an invalid program.
===================================
Common Language Runtime detected an invalid program. (System.Xml)
------------------------------
Program Location:
at System.Xml.Schema.SchemaInfo..ctor()
at System.Xml.Schema.XmlSchemaSet..ctor(XmlNameTable nameTable)
at System.Xml.XmlReaderSettings.get_Schemas()
at Microsoft.SqlServer.UpgradeAdvisor.ReportViewer.UAReportController.LoadAndValidateDataFile()
at Microsoft.SqlServer.UpgradeAdvisor.ReportViewer.UAReport.ValidateDataFile()
at Microsoft.SqlServer.UpgradeAdvisor.ReportViewer.UAIssueReport.Refresh()
at Microsoft.SqlServer.UpgradeAdvisor.ReportPanel.OpenReport(String reportFile)
We are in a lost for solutions. We do hope to hear from anyone asap...
Greatly appreciated for any kind assistance.
Thanks.
Hi,
We are running a test upgrade form sql 2000 standard edition 32 bit to sql 2005 developer edition 32bit. Followed through all the steps and specified the account(SA priveleges and currently used by the 2000 version) and is the local admin on the box for the services and the setup seemed to move fine, except for when it got to the point of installing database services - This is the error message that I got:
MSSQLServer could not be started. Verify you have sufficient priveleges to start system services. The was no choice but to hit cancel and then the set up progressed with a final message of 'SEtup failed'.
Here is a portion of the error log:
Attempting to recover in-doubt distributed transactions involving Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required.
Database Mirroring Transport is disabled in the endpoint configuration.
Starting up database 'master'.
Converting database 'master' from version 589 to the current version 611.
Database 'master' running the upgrade step from version 589 to version 590.
Error: 946, Severity: 14, State: 1.
Cannot open database 'master' version 589. Upgrade the database to the latest version.
System Task Aggregate global counters produced an error that was not handled. Major: 9, Minor: 46, Severity:14, State:1
Error: 928, Severity: 20, State: 1.
During upgrade, database raised exception 15151, severity 16, state 1, address 01C4C50B. Use the exception number to determine the cause.
Error: 15151, Severity: 16, State: 1.
Cannot find the endpoint 'TSQL Local Machine', because it does not exist or you do not have permission.
Any help would be greatly appreciated
Thanks KR
Greetings,
I have a client whose DBA upgraded their SQL 2000 database to SQL 2005. They still have it running in 8.0 compatibility mode, for various reasons, and would like me to help them develop a migration strategy to get them to full 9.0 compatibility.
My question is: can I run the Upgrade Advisor on a SQL 2005 engine database running in 8.0 compatibility mode and get anything useful? I already know there will be some issues with existing DTS packages but it would be nice to catch any other issues in advance.
I know that the Upgrade Advisor was run before the upgrade took place but to my knowledge the report was not saved and none of the recommendations were followed.
Any help would be greatly appreciated.
Cheers,
Lon
Hello There,I'm trying to create a view that has calculations dependent oncalculations, where the problem resides is that each time I make acalculation I must create an intermediate view so I can reference aprevious calculation.for example lets say I have my_table that has columns a & b. now I wanta view that has a & b, c = a + b, and d = c + 1.this is grossly simplified, the calculations I actually use are fairlycomplex and copying / pasting them is out of the question.so what I have is my_view_a which makes column c, and my my_view_finalwhich makes column d (however, in my real application I have 5 of theseviews, a/b/c/d/e/)is there anyway I can consolidate all these views into one? I wasthinking of using a stored procedure with temp tables or somethingalong those lines.I just which I can use the aliases that I create for c in d in onestep.any insight would be greatly appreciated.
View 5 Replies View RelatedHi,
I want to assign a list columns to be the PK on a table. I don't know what this list of columns would be.How do I go about figuring that?
Sample Data
Col1...Col2...Col3..Col4
1...........2.......A......X
1...........2........B.....X
1...........2.......A......Y
As you can see Col1 & Col2 ONLY do not make up the PK. I need to include Col3 as well. My concern is I am not sure if I have a row like..
1...........2.......A......X reapeated lower down the order. So how do I figure the PK out?
Thanks
Can someone show me some C# code for detecting if a SQL row exists or not? This seems like a very typical action and I cannot for the life of me find a tutorial online that explains this step. In my code I'm either going to INSERT or UPDATE a record. I tried sending a SELECT command through a ExecuteNonQuery, but only got -1 as a response. Apparently ExecuteNonQuery does not work with SELECT. I then saw that T-SQL has an EXISTS keyword, but I cannot see anyway to use that from within C#.So...can anyone share the typical code they use to identify if a row exists or not within a database. I guess I was execting there to be some method available to do this sort of thing.
View 1 Replies View Relatedi want to check a value in 2 tables. the 1st table i want to check if the value exists and from the 2ed table i samething.
i came up with this but when it's doing the second if i get error on the page.
Dim ReturnVal As Integer
Dim ReturnVal2 As IntegerDim conn As SqlConnection = New SqlConnection(ConfigurationManager.ConnectionStrings("imacstestConnectionString").ConnectionString)
Dim cmd As SqlCommand = New SqlCommand("SELECT [ReportNumber] FROM [AppraisalSummaryBlue] WHERE ([ReportNumber] = @ReportNumber)", conn)
'To check if the # is registered.Dim cmd2 As SqlCommand = New SqlCommand("SELECT [ReportNumber] FROM [t_RegisterInfoTemp] WHERE ([ReportNumber] = @ReportNumber)", conn)
cmd.Parameters.AddWithValue("@ReportNumber", txtReport.Text)cmd2.Parameters.AddWithValue("@ReportNumber", txtReport.Text)
conn.Open()
ReturnVal = Convert.ToInt32(cmd.ExecuteScalar())
conn.Close()
'This checks if the # is correct.
If ReturnVal > 0 Then
'This checks if its registered with someone else.
conn.Open()
ReturnVal2 = Convert.ToInt32(cmd2.ExecuteScalar())
conn.Close()
If ReturnVal2 <> 0 ThenServer.Transfer("regccinfo.aspx")
Else
lblError.Text = "the # is registered with someone else."
End If
Else
lblError.Text = "the # does not exists."
txtReport.Focus()
End If
Good morning everyone I am writing a windows forms application that will work similar to the windows messenger popup. I need this application to display a message to the user whenever a record is added to table in my DB. Any help would be appreciated in explaining how I can check the DB for new records.
View 3 Replies View RelatedI've forgotten the character set that I've chosen when I was installing the SQL Server 7. Is there a way to check?
I'm currently using US English version of Windows NT4 and SQL7. But interestingly, all the data is in Japanes characters. It's actually for a Japanese website, and the front-end application is written in ASP. I remember reading somewhere that it is impossible to do certain type of sorting (by some particular order for the Japanese language) as it is limited by the choice of the language of the NT OS.
The type of sorting that I'm looking at is the grouping of 5-characters. One example is in http://www.forest.impress.co.jp/aiueo.html
Would this be possible with my current setup? Or would it help if I migrate over to Windows 2000? (I'd rather not move to Japanese NT4)
Your feedback and advice would be very much appreciated!
Hi,
Just a brief question. I have a script which does a number of insert statements. What I would like to do is determine if the insert statements were all successful. Aside from checking @@ERROR after every insert, is there a way to check if all the insert statements completed successfully?
Thanks,
Jim
I want to do a check to see if a number falls within a range specified by the user. Basically, they enter in a min and max value and I return a hit if a number falls inbetween.
I have having trouble with my SQL statement:
Code:
SELECT DISTINCT *
FROM Table
WHERE ( (0=0)
AND
(min.value <= Table.Value <= max.value) )
(This isn't my actual code, but just the logic)
It will return all the results everytime. Does anyone have any suggestions on what I could be missing here?
Thanks in advance!
I have a question I hope someone can help me with.
My situation:
I have a single-step job in SQL Server, which runs a stored procedure, A. This stored procedure invokes another stored procedure, B. In B, one of the statements is a 'BACKUP DATABASE' command, and a database is backed up to a file.
The job is started by an application. Once started, the application then uses the SQL-DMO property CurrentRunStatus to periodically check the status of the job. When the property returns the value SQLDMOJobExecution_Idle (indicating the job has completed), the application code then continues processing, and attempts to access the .dat file produced by the 'BACKUP DATABASE' command.
My problem:
On occasion, the application will hit the problem where either the backup file cannot be located, or the file is still being locked by another process (Error=The process cannot access the file because it is being used by another process).
Is anyone able to shed some light on this?
I assume that the job will only return a completed status after:
(a) both A and B have completed execution, and
(b) the BACKUP operation has completed
Is it possible that even though SQL Server indicates the job has finished, that the BACKUP operation still hasn't completely ended?
Thanks for any help,
Andrew
I have around 25 sql servers(sql server 2000) all on windows server 2003. i would like to know if anyone has a script that will poll all the servers and check to make sure the agent is running.
thanks for your help
I need to check one table while updating another table
suppose i need to check table1's value is whether less then 0 or not
without if condition can i check it with update query?
thank you
Hello, everyone:
After backup is finished, how to check if the backup is successful, and it is same as the original database? Thanks.
ZYT
I have a table that I know has a null or nothing in a field. When I run this query to get a list of them nothing comes back at all but it doesn't error out. Any ideas?
select *
from lab_test_add_conf
where table_name = null
order by lab_test_conf_id
I chaps and chappets.
It's been a while!
This is going to sound ignorant but...
I had a look here http://support.microsoft.com/?id=321185
And one thing isn't clear. How doe you know if the 32-bit or 64-bit version was installed?
------------------------
Me: What do you want to know from your data warehouse?
Client: Err...Emm...Everything
Me: OK, that's great. That's all I need to know. I'll see you when it's done.
i'm not fluent with sql and i have a question to ask..
if i want to check whether a product is available between two dates, how can i do so? for example, i want to check whether it's available between 5/23/2007 to 5/25/2007..
thanks
Our System currently has on the upwards of 300 stored procedures in it.
We have SP's that call SP's that call SP's and sometimes a Stored Procedure will return 10 ResultSets which are used by .NET.
Some of our developers do not check other stored procedures when they modify the SP parameters, and in doing so break the system until the testers find it.
is there a way to run a command to check ALL the stored procedures to see if they work, they match the SP they're calling, etc?
Hey all,prolly a simple solution, but why isn't the following string working inmy execute sql step within DTS? It produces results, just not the onesI want... What am I doing wrong?select x from new_files where x like '%[^0-9]%' and x like '%[^a-z]%'It's displaying all the records? It should only be displaying thoserecords that do *not* contain letters or numbers.Thanks in advance!-Roy
View 3 Replies View Related