CmdExec Errors!
Oct 1, 2001
I have tried to make a DTS task running a batc-file on the same server as the SQL program is running using the CmdExec command.
My Command is as follows:
CmdExec serverpathatchname.bat
The problem is that everytime the step runs it report the following error:
"The system cannot find the file specified."
In the bat file I am also trying the de-map/map a network drive with another loginname/password than the one used on the SQL-server -> is this i problem?
Hope to hear from you soon, this is a bit urgent!!
Please provide tips to this adresse: qtip@bigfoot.com
View 1 Replies
ADVERTISEMENT
Nov 11, 1998
I would like to trap a return value from a cmdexec that is scheduled. The cmdexec returns 0 if it is a success and something other than 0 if it doesn't.
Can I raise an error from a command file. The command file calls a console application ( i.e. no interface ).
Any help is appreciated.
View 1 Replies
View Related
Jul 3, 2007
I have to verify a .CSV file exists before I run a BULK INSERT. I am using XP_FileExist in SQL 2000 to accomplish this. After the Bulk Insert is completed and validated, I need to Rename the file and Move the file to archive the folder. For testing I figure If I can rename the file I can move it. I suspect I have permission issues and need to provide the SQL Server Agent permissions to this folder and file. I have my PC setup as a SQL 2000 Server and am attempting to get this step only working on my local machine. I created a nightly Job that remanes a file that I created in a Job and that is all it does. I am running the Job as SA but am still having issues.
The step being executed by the Job is "Ren C:MyTestFile.csv C:MyTestFile1.csv" (with the quotes). If I run this statment (without the Quotes from a command prompt, the file is renamed.
I have set the Type as "Operating System Command (CmdEXEC)". The Job history shows "The process could not be created for step 2 of job 0x71D51027F920A140A2913234DB7FF509 (reason: The system cannot find the file specified). The step failed."
As I said, I suspect that it is a permissions issue as the command works from the command prompt. What is the windows account that the SQL Server Agent uses to commit these commands? I added "Everyone" with Full access to the folder and I still get the same failure.
I would appreciate any assistance anyone could provide. Thanks in advance!
View 1 Replies
View Related
Feb 4, 2000
Hi All,
In creating 'steps' in JOBS, is it possible to execute many DOS CmdExec in
one step, instead of creating several steps with a single DOS-cmd in each.
For example:
Step1: bcp sourcedb..sourcetbl out source.dat -n -T -Ssourceserver
Step2: isql -T -Stargetserver -Q "truncate table targettbl"
Step3: bcp targetdb..targettbl in source.dat -n -T -Stargetserver
If I created a job executing those 3 functions in 3 separate steps then it works fine. But if I put all those 3 DOS command in one step, it won't work. Somehow,
SQL doesn't 'understand' it should execute after the end of each command OR
I missed something here (apparently so!).
I know if I put all those 3 DOS commands into a DOIT.BAT and execute it, it will work. But I want to use SQL Job to schedule it to run on a regular basis.
Anyone has run into this same problem? Thanks in advance.
David Nguyen.
View 1 Replies
View Related
Feb 2, 1999
WE have a number of SQL 6.5 servers all of which run many scheduled tasks. However on one all tasks which use cmdexec to run batch files fail after 2-3 seconds. The history returns : 'No message' and the error logs just indicate that the tasks have faILED.
The identical tasks run on servers with what appears to be identical configurations and setup.
Tasks scheduled using Tsql run OK !
I would be grateful for any advice or help
Many thanks in advance
Tom
View 1 Replies
View Related
Aug 17, 2001
I have a Job that runs a cmdexec job step which executes a batch file in sql server 7.0 that runs fine
In sql 2000 when i try to run that job it gives the following error and fails
----
the process could not be created for step 1 of job 0x677EF599B13FA743AA2D501D4C211AC4 (reason: The system cannot find the file specified). The step failed.
------
In fact i am not able to execute any cmdexec job in sql 2000
The owner of the above job is sa
Does it have to do with SqlAgentCmdExec account which is set to corporate/administrator and has required permission.
Help will be greatly appreciated.
View 1 Replies
View Related
Aug 20, 2007
Thanks for the invitation to post a question, so I will post one.
I need to create a job step that uses cmdExec.
This is the command line I entering:
D:odbcTimeClockUpdatesinReleaseTimeKeepingNo nLogouts.exe
When I run this job the job fails. When I look at the job history, the only information I get is the date and time, user that ran the job and the fact that it failed. I haven't been able to get any CmdExec job to run at all. Can anyone tell me what I'm doing wrong?
Facts.
1. This exact same command is used by my network administrator using windows scheduler on the server. The only reason he wants me to create an sql server job is because it's mostly sql functions.
2. I know the Sql Server agent is running, because I have other jobs that are run.
3. I have verified that I have permission to run the file because I can go to the actual directory and run the exe.
4. Do I need to enclose my command in quotes i.e. “D:odbcTimeClockUpdatesinReleaseTimeKeepingN onLogouts.exe”
5. the path of the file I need to run is the path on the server and not the path on my local machine.
If you need any other information, please let me know
Thanks for you help
GEM
View 7 Replies
View Related
Nov 15, 2007
Hi all,
I've working a while, not at full time, but seeking the solution...Here what I want to do and what I've done till now:
I want to build a sql job, so I can run a package (witch loads 2 excel sheets into 2 tables) passing "dynamic" parameters, like convert(varchar,getdate(),112) in the format YYYYMMDD. From what I've found, I can do this with an Stored Procedure, which first set this variable, building a statement so it can be run by xp_cmdshell. For example:
EXEC master.dbo.xp_cmdshell 'DTEXEC /SQ PACKAGE /SET "Package.Variables[DAY].Value";20070101'
And this statement runs with no problem in the SP until it reaches the step of loading the Excel Sheets into tables. Here it gives an error. It's about the JET driver. From what I've read in the forum and from the output error the problem seems to be that this statement executes the dtexec.exe 64bits, even the suggestion to change the property Run64BitRuntime set to False, it stills running from the dtexec.exe 64bits.
So, I changed the statement to point to dtexec.exe 32bits:
EXEC master.dbo.xp_cmdshell 'C:Program Files (x86)Microsoft SQL Server90DTSBinnDTExec.exe /SQ PACKAGE /SET "Package.Variables[DAY].Value";20070101'
But executing this statement it does not even run. The errors are:
'C:Program' is not recognized as an internal or external command
operable program or batch file
This was very wird to me, because this was very mentioned by the moderators.
So, I copy this same statement and created a job with a step type of "Operating System (CmdExec)" and it runs great...With no problem with the extraction from excel source.
Now my questions are:
1. Why the step job CmdExec recognizes the path of dtexec.exe 32bits ('C:Program Files (x86)Microsoft SQL Server90DTSBinnDTExec.exe ), but trying to run with xp_cmdshell it gives the error mencioned above. And if there is another way to set dtexec.exe 32bits besides this way?
2. If I cannot run it throught xp_cmdshell, how could I pass a parameter like convert(varchar,getdate(),112) in the format YYYYMMDD instead of the static parameter 20070101.
Thanks in advance.
Marco Francisco (Portugal)
View 9 Replies
View Related
Mar 24, 2006
I have a scheduled job that has been running fine for 2 years, but this week I keep getting the following error:
0x469A75B7998F8142A910FA7E9983CCDF
has caused an exception in the CmdExec subsystem and has been terminated.
the enterprise manager shows that the job failed, but the app still shows up in task manager.
any suggestions?
thanks
View 1 Replies
View Related
Oct 11, 2000
Hi:
I want to copy a backup from the production server to another server
periodically. The following is the DOS command and it works in DOS propmt
d: is the local drive and g: is the mapping server
---------------------------------------------------
"copy d:ackupackup_CustomerDB.dat g:mssqlackupackup_on_3Wednesdayackup_CustomerDB .dat"
I try to use the above command in the executive task with CmdExec as type,
if failed. Then try on
"cmd c/ copy d:ackupackup_CustomerDB.dat g:mssqlackupackup_on_3Wednesdayackup_CustomerDB .dat"
this time, it started to run with no error. But it run 40 miniutes and I cancelled it, since it should only run 10 minuts.
thanks for the help
David
View 1 Replies
View Related
Apr 12, 2008
I'm a bit confused. On the command line of the job step property I entered dtexec /SQL... and got an error saying file not found, I assumed dtexec itself couldnt be found. So I tried /SQL .... by itself and got something that looked more like a security error. If I make the step property type "ssis" job appears to run fine, I receive my pkg's on success (rather than on failure) email but I know everything isnt fine because even if no data is ETL'd, first executable is supposed to (and always has in client) insert a row into an audit table and it doesnt. If I set job step "type" to t-sql and simply db email myself with t-sql command, everything is fine.
The first question is "Wouldnt dtexec need to be specified, how else could sqlagent know what I'm trying to run?" If answer is yes, what's wrong with my syntax or environment?
View 9 Replies
View Related
Mar 25, 2003
Can someone tell me how i can generate an exit code (Cmdexec). Ive tried running an .exe file in a job but when i do that the job hangs. When i check the history it says the exit code is somewhere in 27000. Now i'm wondering if it is possible for me to generate an exit code if the executable closes.
PS. When i run the file from a batch file it works great
View 1 Replies
View Related
Nov 15, 2006
I have sql 2000 job that has been setup as a "Operating System Command (CmdExec) job. I am logged into the SQL Server as DomainNameSQLAdmin this domain account is part of the Administrator group on the SQL Server that the job in running on. This account has SysAdmin rights and is also starting the MSSQLSERVER Service and SQLSERVERAGENT Service on the same machine.
The job just copies files from one directory to another, here's the code.
D:
cd MSSQLBACKUPAPAP_Primary
xcopy *.* D:MSSQLBACKUPAP /s/y/d
When run as a job, with the owner of the job being DomainNameSQLAdmin the job fails with the following error message: Executed as user: DomainNameSQLAdmin. The process could not be created for step 1 of job 0x822E9AD29DCAAF4196369A46C7FE212A (reason: Access is denied). The step failed.
Here's the weird part if I open a command window on the sql server and run the batch it works fine.
I even tried executing the commands via xp_cmdshell but that didn't work either, I recieved the message: (1 row(s) affected) with the output being NULL and the file was never copied.
Anyone have an idea whats going on?
View 4 Replies
View Related
Aug 15, 2007
Hi, I have the following setup:
- Win 2K Server, SP4
- SQL Srv 2K, SP4
- A 'DEV' domain, with an 'Administrator' account with all possible rights on the system
I need to configure a CmdExec proxy account in order to allow non-sys-admin users to execute the master.dbo.xp_CmdShell procedure.
When attempting to do this via QA as follows:
EXEC master.dbo.xp_sqlagent_proxy_account N'SET',
N'DEV', -- agent_domain_name
N'Administrator', -- agent_username
N'password' -- agent_password
...I get the following error:
"The system cannot find the path specified."
When attempting to do this via QA as follows (note: only change is adding domain to agent_username arg):
EXEC master.dbo.xp_sqlagent_proxy_account N'SET',
N'DEV', -- agent_domain_name
N'DEVAdministrator', -- agent_username
N'password' -- agent_password
...I get the following error:
"Error executing extended stored procedure: Specified user can not login"
I have tried this through Enterprise Manager and get identical results, of course.
I have also tried all of the following:
- different OS user accounts, including local system accounts with local admin rights;
- assigning the OS account to a SQL login with System Admin role/rights;
- specifically assigning the above SQL login with EXEC rights on the master.dbo.xp_CmdShell procedure;
- verifying local security policy settings, as per the following link: http://support.microsoft.com/?id=283811;
- pulling out my hair and banging my head against the wall.
Can anyone H E L P ? ! ! !
Thanks,
Joe
View 6 Replies
View Related
Oct 18, 2006
I have created an Integration Services package on my development machine. The package contains a configuration file witch let's say is stored in c:projectsMyIntegrationServicesProjectmyConfigfile.dtsConfig (on my dev machine).
Then I have another "Production" machine where I import the SSIS package into an SQL database. I then create an sql-job with only one step, to run my SSIS package. This works fine if I configure the step to be an "SQL Integration services package" and configure it to use my configurationfile.
However I would like to configure this package as a CmdExec step. In the commandline, I specify /CONFIGFILE "d:....myConfigfile.dtsConfig" (the correct path on the prod machine). But it seems to be ignored, because when I execute the package I get an error telling me that the configuretion file c:projectsMyIntegrationServicesProjectmyConfigfile.dtsConfig cannot be found.
What I try to say is, it seems like it ignors the config-file I specify on the command-line and tries to reach the config-file on a location that's probably stored somewhere in the SSIS package from the time it was created on my development machine.
Is there a way around this?
View 5 Replies
View Related
Aug 17, 2006
I have an SSIS package that runs fine through command pormpt although when I try to run it from a SQL Servr Agent Job CmdExec step it bombs out. Please help this has me stumped...the SSIS package uses an XML connection string so certain key settings such as connection strings and email info can be changed easily. Currently this is all on the same machine. I have not moved it beyond where I am developing.
On the command line I am using the following command...
dtexec /F "S:connectionscontacts.dtsConfig" /DE "password"
Below is the output log...
Microsoft (R) SQL Server Execute Package Utility
Version 9.00.1399.06 for 32-bit
Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
Started: 6:59:40 PM
Progress: 2006-08-16 18:59:41.29
Source: Data Flow Task
Validating: 0% complete
End Progress
Progress: 2006-08-16 18:59:41.29
Source: Data Flow Task
Validating: 33% complete
End Progress
Progress: 2006-08-16 18:59:41.71
Source: Data Flow Task
Validating: 66% complete
End Progress
Progress: 2006-08-16 18:59:41.73
Source: Data Flow Task
Validating: 100% complete
End Progress
Progress: 2006-08-16 18:59:41.77
Source: Data Flow Task
Validating: 0% complete
End Progress
Progress: 2006-08-16 18:59:41.77
Source: Data Flow Task
Validating: 33% complete
End Progress
Progress: 2006-08-16 18:59:41.77
Source: Data Flow Task
Validating: 66% complete
End Progress
Progress: 2006-08-16 18:59:41.77
Source: Data Flow Task
Validating: 100% complete
End Progress
Progress: 2006-08-16 18:59:41.79
Source: Data Flow Task
Prepare for Execute: 0% complete
End Progress
Progress: 2006-08-16 18:59:41.79
Source: Data Flow Task
Prepare for Execute: 33% complete
End Progress
Progress: 2006-08-16 18:59:41.79
Source: Data Flow Task
Prepare for Execute: 66% complete
End Progress
Progress: 2006-08-16 18:59:41.79
Source: Data Flow Task
Prepare for Execute: 100% complete
End Progress
Progress: 2006-08-16 18:59:41.81
Source: Data Flow Task
Pre-Execute: 0% complete
End Progress
Progress: 2006-08-16 18:59:41.84
Source: Data Flow Task
Pre-Execute: 33% complete
End Progress
Progress: 2006-08-16 18:59:41.90
Source: Data Flow Task
Pre-Execute: 66% complete
End Progress
Progress: 2006-08-16 18:59:41.90
Source: Data Flow Task
Pre-Execute: 100% complete
End Progress
Progress: 2006-08-16 18:59:41.92
Source: Data Flow Task
Post Execute: 0% complete
End Progress
Progress: 2006-08-16 18:59:41.92
Source: Data Flow Task
Post Execute: 33% complete
End Progress
Progress: 2006-08-16 18:59:41.92
Source: Data Flow Task
Post Execute: 66% complete
End Progress
Progress: 2006-08-16 18:59:41.92
Source: Data Flow Task
Post Execute: 100% complete
End Progress
Progress: 2006-08-16 18:59:41.92
Source: Data Flow Task
Cleanup: 0% complete
End Progress
Progress: 2006-08-16 18:59:41.93
Source: Data Flow Task
Cleanup: 33% complete
End Progress
Progress: 2006-08-16 18:59:41.93
Source: Data Flow Task
Cleanup: 66% complete
End Progress
Progress: 2006-08-16 18:59:41.93
Source: Data Flow Task
Cleanup: 100% complete
End Progress
Progress: 2006-08-16 18:59:41.95
Source: Send Mail Task
The SendMail task is initiated.: 0% complete
End Progress
Progress: 2006-08-16 18:59:42.09
Source: Send Mail Task
The SendMail task is completed.: 100% complete
End Progress
DTExec: The package execution returned DTSER_SUCCESS (0).
Started: 6:59:40 PM
Finished: 6:59:42 PM
Elapsed: 1.984 seconds
When I try to use the same command within SQL Server Agent Job using a CmdExec step I get the following error...
Description: The package is attempting to configure from the XML file "S:connectionscontacts.dtsConfig". End Info Warning: 2006-08-16 18:40:03.15 Code: 0x80012012 Source: contactsPackage Description: The configuration file name "S:connectionscontacts.dtsConfig" is not valid. Check the configuration file name. End Warning Warning: 2006-08-16 18:40:03.15 Code: 0x80012059 Source: contactsPackage Description: Failed to load at least one of the configuration entries for the package. Check configurations entries and previous warnings to see descriptions of which configuration failed. End Warning Info: 2006-08-16 18:40:03.20 ... Process Exit Code 1. The step failed.
Thanks in advance for any help!!!
View 2 Replies
View Related
Jul 1, 2015
I recently updated the datatype of a sproc parameter from bit to tinyint. When I executed the sproc with the updated parameters the sproc appeared to succeed and returned "1 row(s) affected" in the console. However, the update triggered by the sproc did not actually work.
The table column was a bit which only allows 0 or 1 and the sproc was passing a value of 2 so the table was rejecting this value. However, the sproc did not return an error and appeared to return success. So is there a way to configure the database or sproc to return an error message when this type of error occurs?
View 1 Replies
View Related
Jul 31, 2006
I have a parent package that calls child packages inside a For Each container. When I debug/run the parent package (from VS), I get the following error message: Warning: The Execution method succeeded, but the number of errors raised (3) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
It appears to be failing while executing the child package. However, the logs (via the "progress" tab) for both the parent package and the child package show no errors other than the one listed above (and that shows in the parent package log). The child package appears to validate completely without error (all components are green and no error messages in the log). I turned on SSIS logging to a text file and see nothing in there either.
If I bump up the MaximumErrorCount in the parent package and in the Execute Package Task that calls the child package to 4 (to go one above the error count indicated in the message above), the whole thing executes sucessfully. I don't want to leave the Max Error Count set like this. Is there something I am missing? For example are there errors that do not get logged by default? I get some warnings, do a certain number of warnings equal an error?
Thanks,
Lee
View 5 Replies
View Related
Apr 20, 2006
Starwin writes "when i execute DBCC CHECKDB, DBCC CHECKCATALOG
I reveived the following error.
how to solve it?
Server: Msg 8909, Level 16, State 1, Line 1 Table error: Object ID -2093955965, index ID 711, page ID (3:2530). The PageId in the page header = (34443:343146507).
. . . .
. . . .
CHECKDB found 0 allocation errors and 1 consistency errors in table '(Object ID -1635188736)' (object ID -1635188736).
CHECKDB found 0 allocation errors and 1 consistency errors in table '(Object ID -1600811521)' (object ID -1600811521).
. . . .
. . . .
Server: Msg 8909, Level 16, State 1, Line 1 Table error: Object ID -8748568, index ID 50307, page ID (3:2497). The PageId in the page header = (26707:762626875).
Server: Msg 8909, Level 16, State 1, Line 1 Table error: Object ID -7615284, index ID 35836, page ID (3:2534). The PageId in the page heade"
View 1 Replies
View Related
Feb 25, 2000
When using the following format & .cmd file keep getting this error . . .
DB-LIBRARY error:
Unexpected EOF encountered in BCP data-file.
Have checked the .fmt & .cmd files & also the table layout that the data is being loaded into. Any help would be appreciated.
FMT File
6.0
28
1 SQLCHAR 0 30 "" 1 UserName
2 SQLCHAR 0 32 "" 2 Password
3 SQLCHAR 0 8 "" 3 PasswordExpirationDate
4 SQLCHAR 0 2 "" 4 HintQuestionID
5SQLCHAR 0 25 "" 5HintAnswer
6SQLCHAR 0 40 "" 6EmailAddress
7 SQLCHAR 0 1 "" 7MarketingEmailInd
8 SQLCHAR 0 1 "" 8 StatusEmailInd
9 SQLCHAR 0 30 "" 9 FirstName
10 SQLCHAR 0 30 "" 10 LastName
11 SQLCHAR 0 1 "" 11MiddleInitial
12 SQLCHAR 0 3 "" 12 Suffix
13SQLCHAR 0 9 "" 13SSN
14SQLCHAR 0 8 "" 14DOB
15SQLCHAR 0 1 "" 15 CustType
16SQLCHAR 0 1 "" 16GradeLevel
17SQLCHAR 0 1 "" 17 SharedComputerInd
18SQLCHAR 0 8 "" 18 SchoolCode
19 SQLCHAR 0 2 "" 19CampusCode
20 SQLCHAR 0 50 "" 20 SchoolName
21 SQLCHAR 0 8 "" 21 SchoolLastVerfiedDate
22 SQLCHAR 0 8 "" 22 DateCreated
23 SQLCHAR 0 8 "" 23 LastLoginDate
24 SQLCHAR 0 4 "" 24 LoginCount
25 SQLCHAR 0 4 "" 25 BadLoginCount
26 SQLCHAR 0 1 "" 26 Status
27 SQLCHAR 0 30 "" 27 LastModifiedUser
28 SQLCHAR 0 8 ";
" 28 LastModifiedDate
CMD File
BCP DEVL_CUSTOMER_DB..tblRegistered_Users_TempX in T:custbasedataincomingRegistered_User.txt /f T:custbaseapplsqlcpbuser.fmt /e T:custbasedata
eportsbuseri.err /o T:custbasedata
eportsbuseri.out /b 1000 /SDataserverjmk /User /Password
View 4 Replies
View Related
Jul 23, 1999
I have been receiving 644 errors on an index for one of my tables. We have dropped and rebuilt the index. Even BCP out, drop the table, create the table and BCP in everything and still have problems.
Has anyone else experienced problems with 644 errors? Did you ever determine the cause and are they any preventative ideas?
TIA
View 2 Replies
View Related
May 24, 2005
I get this error when i try to modify or fix a job
Cannot add, update, or delete a job(or ists steps or shcedules) that aoriginated from an MSX Server.
error 14274
Why is this? Any ideas. I checked the sysjobs in the msdb and they have the correct server name for the jobs?
View 2 Replies
View Related
May 11, 2004
Ok, whenever I try to connect, I get the following Error messages:
"SQL Server Registration failed because of the connection failure displayed below.
SQL Server does not exist or access denied.
ConnectionOpen (Connect())"
"An Error 1069 occured while performing this service operation on the
MSSQLServer Service"
I even went as far as uninstalling and reinstalling, but to no avail. Does anyone have an idea what's causing this? It was working fine and then all the sudden one day I start getting these messages and it won't work.
Thanks!
Smitty
View 6 Replies
View Related
May 5, 2008
I have a dynamics db that is used for archival purposes and it is not used very often. Now that someone decided to get some info out of it it wont let them. when I run dbcc I get the following message:
Msg 5242, Level 16, State 1, Line 1
An inconsistency was detected during an internal operation in database 'PACIF'(ID:12) on page (1:19451). Please contact technical support. Reference number 6.
Msg 8921, Level 16, State 1, Line 1
Check terminated. A failure was detected while collecting facts. Possibly tempdb out of space or a system table is inconsistent. Check previous errors.
I was just wondering if this meant anything to any of you? and since all of my backtapes have the same issue, is there any way to fix it?
thanks in advance.
View 11 Replies
View Related
Jun 5, 2007
Failer to generate user instance is the error.
View 1 Replies
View Related
Jan 21, 2008
Running SQL 05 Standard on a Vista box and I have about had it with Vista. Anytime I try to launch Config Manager I get Cannot connect to WMI provider. You do not have permission or the server is unreachable. So try I googled and tried everything I can fine from http://blogs.msdn.com/echarran/archive/2006/01/03/509061.aspx
C:Program FilesMicrosoft SQL Server90Shared>mofcomp "C:Program FilesMicrosoft SQL Server90Sharedsqlmgmproviderxpsp2up.mof" and now I get ..
An error occurred while processing item 10 defined on lines 73 - 79 in file C:s
qlmgmproviderxpsp2up.mof:
Error Number: 0x80041003, Facility: WMI
Description: Access denied
Compiler returned error 0x80041001
so I try every possible different permission setting for anything sql server - problem still happening... try procmonitor.. find the registry keys and grant full contorl to all of them.. problem still happending.. run the little fixwmi.cmd I found.. problem still happening..
try to uninstall SQL Server.. NOT - WMI error - try to reinstall over--- NOT WMI error.
What do I need to do to get this working. .this is becoming a serious hinderance to my productivity!!!
View 15 Replies
View Related
Jun 11, 2007
what a want to know is if there s a way to log sql server errors on a log file, table, these errors are not sql server logs which already exists, i want to log dead locks, sql server timeout errors vs on sql server or somewhere.
is it possible ?
may i use sql server profiler for that purpose?
thx in advance..
View 1 Replies
View Related
Jul 13, 2006
Hi Expert,
I have a datagrid which is filtering by a dropdownlist and a search textbox.
The dropdownlist allows to select the column they want to search.
The search textbox allows to enter the item they want based on the selection from dropdown.
Now I use a StoreProcedure to select the data they need, so I pass-in @DropDownListValue int and some others parameters, such as @ID int, @OrderType varchar(50) ... When I search for ID = 163
Input string was not in a correct format.
Then when I check with the SQL Server Profiler, I found out that:
exec usp_SelectOrder@DropDownListValue=N'1',@ID=N'163',@OrderType=N'163',@OrderSeries=N'163' ...
I already set every parameter's default value to NULL. How can I solve for this? Thanks!!
View 1 Replies
View Related
Sep 18, 2007
Why on earth is this not working, It WILL insert if there are NO apostheres (" ' "), but if I say like, "Cedric's Group" It will error out. I thought this approach was suppose to handle this character?
Thanks for any insight, String sqlStr = "Insert into cardgroups (username,groupname,insertdt,groupid) values (@username,@groupname,@insertdt,@groupid)";
SqlCommand cmd = new SqlCommand(sqlStr, connect);
cmd.Parameters.AddWithValue("@username", Session["memberusername"].ToString());
cmd.Parameters.AddWithValue("@groupname",this.namebox.Text.ToString());
cmd.Parameters.AddWithValue("@insertdt", DateTime.Now.ToString());
cmd.Parameters.AddWithValue("@groupid", myGroupStr);
connect.Open();
cmd.ExecuteNonQuery();
connect.Close();
View 2 Replies
View Related
Nov 17, 2007
Imports System.Data.SqlClientImports System.DataImports Microsoft.SqlServerPartial Class _Default Inherits System.Web.UI.Page Protected Sub Button1_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Button1.Click End Sub Protected Sub TextBox3_TextChanged(ByVal sender As Object, ByVal e As System.EventArgs) Handles TextBox3.TextChanged End Sub Protected Sub SqlDataSource1_Selecting(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.SqlDataSourceSelectingEventArgs) Handles SqlDataSource1.Selecting End Sub Protected Sub Save_Button1_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Save_Button1.Click Dim conn As New SqlConnection() conn.ConnectionString = Data Source=REDSTONE;Persist Security Info=True;User ID=******;Password=******;Unicode=True End SubEnd Class
End of statement expected. C:Documents and SettingskasireddyMy DocumentsVisual Studio 2005WebSitesBankCustomerInfo.aspx.vb
'System.Data' is a namespace and cannot be used as an expression. C:Documents and SettingskasireddyMy DocumentsVisual Studio 2005WebSitesBankCustomerInfo.aspx.vb
C:Documents and SettingskasireddyMy DocumentsVisual Studio 2005WebSitesBankCustomerInfo.aspx.vb
View 1 Replies
View Related
Mar 25, 2006
Hello to all,
On my webPage I have Used one SQLDataSource to access DataBase. Now whenever some error occures it shows error page by default. I am not able to catch Errors and tackle in my way...
Furthermore in this new structure of accessing DataBase even I do not know where to write Try... Catch...
View 1 Replies
View Related
Apr 30, 2002
Hi,
Well there's always a first for everything!! I have a SQL 7.0 server on sP1
and ran upgrade to sp3 and recieved error 'error in upgrade script' retry or cancel. When I retried the upgrade ended. I tried to run the upgrade again and it tries continue where it ended before, but the upgrade ends unsucessfully. I even tried extracted the sp3 exe to a diffrent folder and ran the sp3 upgrade with same results.
I started the MSSQL service ok but not able to use Query Analyzer, DTS, EM.
Get the following message:ISQL.EXE - Entry Point not found. The procedure entry point?DeleteRow@CDataCTLStorage@@UAEJJPAPAG@Z could not be located in the dynamic link library SQLGUI.dll
I get similar msgs when trying to open DTS, Enterprise manager from the server. The user databases and appear to be ok. I am able to get to Query Analyzer, etc. from my worksation fine.
Has anyone encountered this before? Is there a fix for it or do I need to rebuild the server from SP1 and restore the databases, etc.??
Thanks Much,
Steve Bajada
Senior DBA
View 3 Replies
View Related
May 29, 2002
It gives following errors
1.time out
2.general network failure
* Are these due to large number of online connnections
*If so what is the maximum number of connections possible
*what is the hardware requirement to avoid this
*what is the impact on stored procedures
*How to tune the server to overcome the problems
*I'm currently using the standard edition what is the impact on enterprise edition
View 1 Replies
View Related
