Column Name Not Recognised Even Though The Procedure Returns A Table With That Name??
Apr 27, 2006
I am databinding a dataset formed from a stored procedure,(all done on page_load).
However, the reference to the column name is not recognised with the following error being returned.
Column with name "CalcVal" was not found.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.ArgumentException: Column with name "CalcVal" was not found.
Source Error:
Line 152: chartCommand.Fill(chartDs);
Line 153: Chart1.DataSource = chartDs;
Line 154: Chart1.DataBind();
Line 155:
Line 156: }
This worked before deployment and the other controls which are bound to data using stored procedures seem to work. However, these other data sources are all sqlDatasoure controls.
Any suggestions would be helpful.
I have found issues relating the to user ID and password which seems to depend on whether the web server and data server are the same machine or whether they are remote from each other.
I have a Column called SaleID in some tables in a Database.The SaleID column has the int datatype. I need a stored procedure that returns the next value in sequence for the SaleID column.
For Example, If the last value inserted into the SaleID column was 1022 the stored procedure should return 1023 If the last value inserted into the SaleID column was 1023 the stored procedure should return 1024. If the last value inserted into the SaleID column was 1024 the stored procedure should return 1025.
Also an exclusive lock should be maintained while the the stored procedure is running.
I have a stored procedure like "select * from ThisTable" I'm doing a dataread like: Dim val as String = dateRead("column_from_ThisTable") If the value in the column is not null everything works great, but if the value is null, instead of getting a value of "" which I expect, I get the column name??? In this case "column_from_ThisTable" How do I make sure I get "" returned when the value in the column is db.null?
We run std 2008 r2. I haven't looked at my friend's function closely yet bur he showed me that when he selects from the function with one column and the same where clause he uses on same func with select *, he gets no data under the column he requested.Â
But when he selects * he gets a single row.
I took a peek and see a bunch of left joins followed by a bunch of outer applies in his func. I suppose (thinking out load) if anything random like the order of rows returned or sql decisions on how query runs can affect his function, that might explain it. Â
com.microsoft.sqlserver.jdbc.SQLServer Exception: A server cursor cannot be opened on the given statement or statements . Use a default result set or client cursor.
If a SP doesnt have a temp table, then there is no issue, SP executes perfectly, but if a SP has a temp table, this error occurs.
SP :
create proc testProcedure @countrCode varchar(3) as
select countryname INTO #TMPCOU from country where countryCode = @countrCode SELECT COUNTRYNAME FROM #TMPCOU
I created very simple table with 3 columns and one is varchar(max) datatype
When i insert records thru VC++ ADO code i am getting this error
Exception Description Multiple-step OLE DB operation generated errors. Check e ach OLE DB status value, if available. No work was done. and Error Number:: -2147217887
2. I deploy the signed assembly to the../../DTS/90/LogProviders directory & the GAC on both machine A & machine B.
3. I create a new package on machine A & go to enable logging for this new custom provider: I find it in the drop-down list of providers, and I can add it successfully.
4. I create a new package on machine B & go to enable logging for this new custom provider: I find it in the drop-down list of providers, but I can't add it. I get the following error:
'...failed to create log provider...the log provider type "_" specified for log provider "_" is not recognized as a valid log provider type. This occurs when an attempt is made to create a log provider for an unknown log provider type. Verify the spelling in the log provider type name (package)."
Hi,I have a stored procedure (the code is below) that I use to retrieveone value from my database. I tested the code in Query Analyzer, and itworks (I get the value I was looking for). However, when I call thesame code from the stored procedure, I get no value. The code that isexecuted is the same and the input parameter is the same. Does anybodyhave an idea?The code:SELECT Top 1CharID,CharName,CategoryName,CharDescription,UserIDFROM [Character]WHERE CharName='Character'-- returns the right valueThe Stored Procedure:CREATE PROCEDURE SpCharacters_SelectOneByUserName@UserName NVarCharASSELECT Top 1CharID,CharName,CategoryName,CharDescription,UserIDFROM CharacterWHERE CharName=@UserNameGO-- returns no value
Why don't i ever get return value of 1 when the following binary column (profSignature) is null? RETURN SELECT ISNULL(profSignature, profSignature) FROM mpProfiles WHERE ApplicantID = CAST(@CID AS INT) AND ProfileID = CAST(@PID AS INT)
Can anyone provide me with some SQL that will identify rows from a table where a varchar column named "Notes" contain Carriage Returns?
I know that with report writer SQR I can translate CR's to white space but I do not know of any Sybase function that will allow me to do the same, any ideas on this well would be appreciated.
Hi folks,I have an issue with a column I created in my query called Instance.SELECT Object_Id, Event_type, Audience, Subject, Provider, Academic_Year, Start_date, End_date, CONVERT(varchar, Academic_Year) + ' (' + CONVERT(varchar, Start_date, 103) + ') : ' + Event_type AS InstanceFROM EventsORDER BY Event_type Above is my query. The problem is because the start date column can be null, it also returns the Instance column as null for that row.I thought it would have just missed out the date and display the rest, but it doesn't.Is there any way I could get the Instance column to display a value, when the start date is null?ThanksEdit: Managed to sort it using ISNULL()
Hello,I have a stored procedure: -- Get an individual league match by IDALTER PROCEDURE [dbo].[mb_League_GetLeagueMatchByID]( @LeagueMatchID int)ASSET NOCOUNT ONSELECT * FROM mb_LeagueMatch WHERE mb_LeagueMatch.LeagueMatchID = @LeagueMatchIDThe mb_LeagueMatch table has a column named IsActive that is a bit datatype.The value for all rows is set to true (in database explorer in visual studio 2005).When I execute the above stored procedure I always get -1 (I'm guessing that means null) as a result for IsActive if it was true and 0 when false (as expected).However, when I run a query on the database for the same parameter, I get the expected 1 as the value for IsActive.Has anyone seen this before?Thanks,Howard
hi, i just want to check whether the given data exists in the database. i am using stored procedure. is there any way to know whether that value exists in database without the need to select anything?
Hi, I need to know whether a stored procedure returns only a single record or it can return more than one if the query if for example to return all records in a specific date range. Thanks.
I am new to SQL and SQL Server world. There must be a simple solutionto this, but I'm not seeing it. I am trying to create a crystalreport (v8.5) using a stored procedure from SQL Server (v2000) inorder to report from two databases and to enable parameters.When I create the stored procedure, it joins multiple one-to-manyrelationship tables. This results in repeated/duplicate records. Isthis an issue that should be solved within the stored procedure, or isthis inevitable? If latter, how do you eliminate the duplicates inCrystal Reports?Let's say we have three different tables - Event, Food, Equipment.Each event may have multiple food and multiple equipments; some eventsmay not have food and/or equipments. The stored procedure outcome maylook like this:Event Food Food_Qty EquipmentEquipment_QtyEvent1 Food2 10 Equipment51Event1 Food4 10NULL NULLEvent2 Food4 50 Equipment210Event2 Food4 50 Equipment52Event2 Food1 12 Equipment210Event2 Food1 12 Equipment52As you can see in Event2, for each Food variations, Equipment valuesrepeat. When I am creating a Crystal Reports, I have the duplicationproblem.What I would like to see in the report is either:Event1Food2, 10 Equipment5, 1Food4, 10Event2Food4, 50 Equipment2, 10Food1, 12 Equipment5, 2OR:Event1Food2, 10Food4, 10Equipment5, 1Event2Food4, 50Food1, 12Equipment2, 10Equipment5, 2Attempt1: Using "Eliminate Duplicate Record" option does not work withthe Equipment section since CR does not recognize "Equipment2" in thethird line of the table and "Equipment2" in the fifth line of thetable as duplicates.Event1 Food2, 10 Equipment5, 1Food4, 10Event2 Food4, 50 Equipment2, 10Equipment5, 2Food1, 12 Equipment2, 10(duplication)Equipment5, 2(duplication)Attempt2: I created group for each category (Event, Food, Equipment),put the data in Group Headers and used "Suppress Section" to eliminateif the same equipments are listed more than once within the Foodgroup. This eliminated the duplication, but the items do not aligncorrectly.Event1 Food2, 10 Equipment5, 1Food4, 10Event2 Food4, 50 Equipment2, 10Equipment5, 2Food1, 12 (I want this to appear right below the'Food4, 50' line)I would really appreciate any suggestions! Thank you in advance.
DECLARE @strRole nvarchar(15), @ContactID int SELECT @strRole = Role, @ContactID = ContactID FROM Contact WHERE UserName = @strUserName Select DISTINCT Contact.ContactID ID, UPPER(Surname + 'gd ' + Forename ) AS Description, UPPER(Surname + ' ' + Forename + ' ' + ContactReference) AS Description_CR , UPPER(ISNULL(ContactReference,'')) ContactReference FROM Contact LEFT JOIN AssignedEmployee on Contact.ContactID = AssignedEmployee.ContactID WHERE RUEmployee=1 AND ( ((@CourseID = 0 AND @blnIsSearch=1 ) OR COALESCE(AssignedEmployee.CourseID,0) = @CourseID)) AND (@ProjectID = 0 OR COALESCE(AssignedEmployee.ProjectID,0) = @ProjectID) AND ( (@strRole = 'MIS_TUTOR' AND (AssignedEmployee.ContactID = @ContactID OR CourseID IN (SELECT CourseID FROM AssignedEmployee WHERE ContactID = @ContactID AND Lead = 1) OR AssignedEmployee.ProjectID IN (SELECT ProjectID FROM AssignedEmployee WHERE CourseID IS NULL AND Lead = 1 AND ContactID = @ContactID)) ) OR (@strRole <> 'MIS_TUTOR') ) SET CONCAT_NULL_YIELDS_NULL ON GO
now if i run this stored procedure in Query Analyzer like so...
but if i lift the SQL out of the stored procedure and run it in Query Analyzer like so....
Code Block SET CONCAT_NULL_YIELDS_NULL OFF
DECLARE @ProjectID int, @CourseID int, @blnIsSearch int, @strUserName nvarchar(20) SET @ProjectID = 0 SET @CourseID = 0 SET @blnIsSearch = 1 SET @strUserName = 'K_T'
DECLARE @Role nvarchar(15), @ContactID int SELECT @Role = Role, @ContactID = ContactID FROM Contact WHERE UserName = @strUserName PRINT @ContactID Select DISTINCT Contact.ContactID ID, UPPER(Surname + ' ' + Forename ) AS Description, UPPER(Surname + ' ' + Forename + ' ' + ContactReference) AS Description_CR , UPPER(ISNULL(ContactReference,'')) ContactReference FROM Contact LEFT JOIN AssignedEmployee on Contact.ContactID = AssignedEmployee.ContactID WHERE RUEmployee=1 AND ( ((@CourseID = 0 AND @blnIsSearch=1 ) OR COALESCE(AssignedEmployee.CourseID,0) = @CourseID)) -- the above line was modified to make sure only employees explicitly assigned to a project are brought back. unless it's a search AND (@ProjectID = 0 OR COALESCE(AssignedEmployee.ProjectID,0) = @ProjectID) AND ( (@Role = 'MIS_TUTOR' AND ( (AssignedEmployee.ContactID = @ContactID OR CourseID IN (SELECT CourseID FROM AssignedEmployee WHERE ContactID = @ContactID AND Lead = 1))) OR AssignedEmployee.ProjectID IN (SELECT ProjectID FROM AssignedEmployee WHERE CourseID IS NULL AND Lead = 1 AND ContactID = @ContactID) ) OR (@Role <> 'MIS_TUTOR') )
SET CONCAT_NULL_YIELDS_NULL ON
i only get 5 records returned???
so why do i get a difference when its the same SQL??
Username 'K_T' is of role 'MIS_TUTOR' therefore @Role = 'MIS_TUTOR'
any help on unravelling this mystery is appreciated!
In SSRS/RDL, How do you format a column heading to use carriage returns?
I have a couple of instance where I have a column heading that I want spread over 3 lines. For example, the column heading "= Actual Amount" I would want centered and displayed on 3 lines, as follows:
I would like to create a function that will return to me the width of the column of the table without giving as a parameter the table name. I need it, as I want to exceed my data in this column to the column length. I want to fill the column data with trailing blanks until I reach the column width. The function len returns the length of the data in the column.
I know that If I have the table name I can find the column width through the system tables. I don€™t want this.
Session("matricN") = Trim(TextBox1.Text) Dim txtValue As String txtValue = Session("matricN") da = New SqlDataAdapter("select MatricNumber,Name, Roles from Register where MatricNumber = " & txtValue, addRoleConn1)
MatricNumber is in varchar(50) datatype,, the errror says there is a syntax near "="
Sincere Apologies for the cross posting. Did not realize that there is a specific DB Mirroring group and so posted initially in the High Availability group. Here is the original post
Hi
I am trying to test DB Mirroring connectivity and running into a road block. using SQLOLDB in my connection string the failover partner keyword seems to be not recognised when the failover occurs and the connectivity fails. The same however works with the SQL Native client driver.
Can any expert please let me know what I am doing wrong and what is the right connection string for the OLEDB one?. I also tried using different flavors of FailoverPartner (like Failover Partner, FailoverPartner etc) to make it work with OLEDB but still could not connect with SQLOLEDB provider.
I have a stored procedure on a SQL server, which is workign correctly to check some date/time parameters and then insert a row into a log table. I am calling it from an ASP page. Initially I just called it and didn't worry about the return value. However the Stored procedure now will return a value to determine if it made the change or not and if not why (ie log entry was at incorrect time etc). I woudl liek to capture this returned value in my code to display a message to the user but am havign problems finding the right way to get the value. I am calling the SP as follows: Shared Sub createlogentry(ByVal ID, ByVal tme, ByVal val) Dim result As String Dim cs As String = ConfigurationManager.ConnectionStrings("connecttion1").ToString Using con As New System.Data.SqlClient.SqlConnection(cs) con.Open() Dim cmd As New System.Data.SqlClient.SqlCommand() cmd.Connection = con cmd.CommandType = Data.CommandType.StoredProcedure cmd.CommandText = "CreateLogEntry" cmd.Parameters.Add("@ChID", Data.SqlDbType.Int) cmd.Parameters("@ChID").Value = ID cmd.Parameters.Add("@Value", Data.SqlDbType.Int) cmd.Parameters("@Value").Value = val result = cmd.ExecuteNonQuery().ToString End Using End Sub
I have tried amending the ExecuteNonQuery line to ExecuteReader() Any help appreciated Regards Clive
I have trying to do an insert with a subroutine that calls a stored procedure, but it doesn’ t run. The page loads properly but nothing is inserted in the table of the database, no errors appears after submit the form. <asp:Button id="SubmitButton" OnClick="Send_data" Text="Submit" runat="server"/>
Here is the code:
Sub Send_data(Sender As Object, E As EventArgs)
Dim CmdInsert As New SqlCommand("new_user1", strConnection) CmdInsert.CommandType = CommandType.StoredProcedure
Dim InsertForm As New SqlDataAdapter() InsertForm.InsertCommand = CmdInsert
hi, im new to this site so i don't know if i'm posting in the correct forum. anyway, this is my code:---Dim dbMac As DBLibrary = Nothing dbMac = New DBLibrary(General.GetMACConnectionString)dbMac.OpenConnection("SPR_STAFFMAIN_GETEMPLOYEERECORDS")dbMac.CreateParameter("@USERENTITYID", GetUserEntityID(), Data.SqlDbType.Int)drpEmpNumbers.DataSource = dbMac.GetDataView("StaffMaintenance")gridStaffMaintenance.DataSource = dbMac.GetDataView("StaffMaintenance")gridStaffMaintenance.DataBind()---DBLibrary is a class that opens a connection to the SQL server. i'm getting an empty grid even though the stored procedure returns a row when i test it in the analyzer. is there to debug or test this code? thanks!
