Configuration Warning Loading Project REAL Etl Package Recurring ETL
Feb 29, 2008
I am trying to load Project Real. I get warnings when opening the RecurringETL package. However I created the two environment variables it's looking for and have confirmed these variables are functional.
I am unsure how to troubleshoot this and am afraid to do anything given these warnings. Where is the configurations collection??????:
Warning 1 Warning loading TestHarness.dtsx: The configuration environment variable was not found. The environment variable was: "REAL_Configuration". This occurs when a package specifies an environment variable for a configuration setting but it cannot be found. Check the configurations collection in the package and verify that the specified environment variable is available and valid. C:Microsoft Project REALETLTestHarness.dtsx 1 1
Warning 2 Warning loading TestHarness.dtsx: The configuration environment variable was not found. The environment variable was: "REAL_Root_Dir". This occurs when a package specifies an environment variable for a configuration setting but it cannot be found. Check the configurations collection in the package and verify that the specified environment variable is available and valid. C:Microsoft Project REALETLTestHarness.dtsx 1 1
Warning 3 Warning loading TestHarness.dtsx: Failed to load at least one of the configuration entries for the package. Check configurations entries and previous warnings to see descriptions of which configuration failed. C:Microsoft Project REALETLTestHarness.dtsx 1 1
Thanks
View 8 Replies
ADVERTISEMENT
Apr 1, 2008
dear list can anyone figure out a workaround as to why OLEDB Provider MSDORA cannot store passwords
I have all the info stored in a table (Project Real Best Practise)
The user id I have stored in string ConfiguredValue gets transfered to OLEDB Provider MSDORA named (SQL_REAL_Source_myoradb) but not the password
To workaround this bug only with MSDORA can aynonne sugest a setting I should use in package security
ie the default is EncryptSensitiveWithUserKey?
thanks Dave
CREATE TABLE [admin].[Configuration](
[ConfigurationFilter] [nvarchar](255) NOT NULL,
[ConfiguredValue] [nvarchar](255) NULL,
[PackagePath] [nvarchar](255) NOT NULL,
[ConfiguredValueType] [nvarchar](20) NOT NULL
) ON [PRIMARY]
ConfiguredValue = Provider=MSDAORA.1;Password=abc;User ID=myuserid;Data Source=myoradb;Persist Security Info=True
PackagePath = Package.Connections[SQL_REAL_Source_myoradb].ConnectionS
View 5 Replies
View Related
Dec 9, 2007
Hello,
I am reading Microsoft REAL project ETL part. I find that it uses neither transaction nor checkpoints throughtout the packages. I am wondering if something goes wrong with the process and the process aborts in the middle,how are we going to handle this. Any particular reson not using transaction? Is it best practice without using transaction for performance consideration and log volumn? I am new to SSIS. I would like to follow the best practice. Thanks for advice..
Regards
Jerry
View 6 Replies
View Related
May 12, 2008
Executed as user: xxxxxx-sql. Microsoft (R) SQL Server Execute Package Utility Version 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 4:14:05 p.m. Error: 2008-05-12 16:14:07.84 Code: 0xC00220DE Source: EPT Dimensions - x Description: Error 0x80070003 while loading package file "E:ETLLoadGroup_Dimensions_Daily.dtsx". The system cannot find the path specified. . End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 4:14:05 p.m. Finished: 4:14:07 p.m. Elapsed: 2.25 seconds. The package execution failed. The step failed.
Hi Im using project real framework and have BIDS installed on same server as SQL Server 2005, when I run from BIDs all
good when I run from SQL Server agent via File system --the first package that master package calls fails
I have double checked the environment variables in Project Real and all good because otherwise BIDs would have failed
and of course in each package the expression data uses @[User::RootDir] to point to the package file path
@[User::RootDir] + \LoadGroup_Dimensions_Daily.dtsx
the issue is the package under SQL Agent is ignoring @[User::RootDir] + \ and finding an old package path somewhere in Bids SLN metadata
Any clues how can refresh the metadata of the package for deployment
thanks in advance
Dave
View 3 Replies
View Related
Jan 14, 2005
Hello,
This is my first project at the company I recently joined. It is the most challenging project I ever had.
It is a kind of web-scheduler.
it let you save appointments which could be one time or periodic.
For example, it could be like every monday, every other monday, first tuesday every monday, and so on.
once they are saved, it should be able to display only those appointments the user have on a specific day.
I'd like to know how database has to be designed to meet such a challenging requirement?
I'd like to hear anything from you if you have had similar project before.
Thank you,
Charlie
View 2 Replies
View Related
Mar 19, 2007
Most of the installation went well. I got to the point of attaching the
source database, but had problems attching the warehouse database:
Database 'REAL_Warehouse_Sample_V6' cannot be started in this edition
of SQL Server because it contains a partition function 'pf_Range_Fact'.
Only Enterprise edition of SQL Server supports partitioning.
I am running standard edition at mey development workstation, the only
one we have running. I do not necessarily need to see partitioning
working. But sounds like I will need to install Enterprise edition at
my development computer to go down this path of discovery? Anyone been
able to do otherwise?
Is there any way to get in and look at the stored procedures at least, or schemas?
Even after going back, it was not clear to me from the prerequisit list that Enterprise edition was required for this.
View 3 Replies
View Related
Sep 15, 2006
We have some SSIS packages that are running on a recurring SQL Job. They work and play fine. They ran for about three iterations and then decided to stop....they don't report errors, they just don't do anything. They sit as if they were disabled (but they aren't disabled, I checked the MSDB database).
You can manually execute the packages and they work fine.
I have dumped and reloaded these packages and that hasn't fixed the issue.
If I setup a simple recuring job that executes a sql script every few minutes that works fine and you can see that it executes every few minutes. But these SSIS packages just sit....and do nothing. But they were working for the first few iterations.
I have also redeployed the SSIS packages and that hasn't fixed it either.
Anybody seen anything like it?
View 1 Replies
View Related
Jun 22, 2007
Hi All,
I have created a SSIS package which calls child packages internally. In other words there is hierarchy of packages. I am using For Loop Container with certain check conditions to execute whole set of packages repeatedly. I have to execute this set for almost 5000 times. But my problem is this set fails after every 50 and sometimes 55 cycles. Can Anybody let me know how to get solution for such a problem?
Regards,
Prash
View 1 Replies
View Related
Jan 8, 2008
Hi,
Can someone explain how the PR testharness is supposed to function? When I run it f with and without debugging and by using dtexec other processes can start and stop before the awaiting response from the console date and number of days to process. If you just look at the testharness and the loadgroupfulldaily the increment date and SQL Audits will finish prematurely before the console data is even entered. Is there a property that I am missing?
Thanks,
Larry
View 1 Replies
View Related
Mar 25, 2008
Hi List
Im trying to set up an implementation of Project Real --it works like this-
Create two system environment variables called REAL_Root_Dir and
REAL_Configuration with the values given below. Click on
Start -> Control Panel -> System. Go to the Advanced Panel, click Environment Variables button, then New in the System variables box.
If the Project REAL files were installed at C:Microsoft Project REAL, then the variable values will be:
Variable Name: REAL_Root_Dir
Variable Value: C:Microsoft Project REALETL
Variable Name: REAL_Configuration
Variable Value: %REAL_Root_Dir%REAL_Config.dtsconfig
The package OLEDB connections work like this
First read enviroment variable to get location of config file
Next read Config File to get connection string for Config Database
<?xml version="1.0"?>
<DTSConfiguration>
<Configuration ConfiguredType="Property" Path="Package.Connections[SQL - Configuration].Properties[ConnectionString]" ValueType="String">
<ConfiguredValue>Data Source=(local);Initial Catalog=DataWarehouseABC;Provider=SQLNCLI.1;Integrated Security=SSPI;</ConfiguredValue>
</Configuration>
</DTSConfiguration>
Next read Config database to get connection strings for Source and Destination databases
Destination database is called "DataWarehouseABC"
Source database is called "SnapshotABC"
the Source database OLEDB connection works 100%
however the destination OLDB connection we get this error below
PS--Both source and destination databases are on the same development machine , however both databases are restored bak files from another production machine
Error 1 Error loading LoadGroup_Daily.dtsx: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Login failed for user 'xxxxxx'.". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Cannot open database "DataWarehouseABC" requested by the login. The login failed.".
Any ideas on how one OLEDB Connection in this package can get this corruption
thanks in advance
Dave
View 5 Replies
View Related
Jul 13, 2015
I have 2 dbs (SQL 2012) - one contains a trigger that is enabled/disabled by a procedure in the other database. This all works fine.
If I create a Database Project solution in Visual Studio 2012 SSDT (or 2013) for both databases, the stored procedure generates a SQL71502 stating that my trigger name can't be resolved.
To recreate the issue:
CREATE DATABASE DbWithTrigger
GO
USE DbWithTrigger
GO
CREATE TABLE dbo.TblWithTrigger(
Id int NULL,
SomeValue varchar(30) NULL
[code]....
-- Test to confirm
EXEC CrossDbTriggerCall
INSERT DbWithTrigger.dbo.TblWithTrigger VALUES(1, 'Blah blah')
In Visual Studio 2012:
1. Create a new solution with a project named DbWithTrigger
2. In project settings set the Target platform to SQL 2012
2. Import the DbWithTrigger db into this project
3. Create a new project named DbCallsTrigger
4. In project settings set the Target platform to SQL 2012
5. Import the DbCallsTrigger db into this project
6. Add a Database Reference in DbCallsTrigger for DbWithTrigger
When you build the solution both dbs build successfully, however there are two warnings. One is easily resolved by replacing DbWithTrigger in the body of the procedure with [$(DbWithTrigger)] (db variable name for the reference) but I can't find out how to get rid of the other. Is it a bug?
View 1 Replies
View Related
Aug 10, 2007
The first step in my SSIS project is to load the 'last run date/time" from an audit table in my OLAP to a package wide user var. I'm using an Execute SQL Task set to single row, correct connection, Select LastDate From AuditTable. I have the proper var in the Result Set.
I'm not sure if the variable is being loaded. It's default value is not being changed when I run the package and I'm not getting the data I think I should get. How can I tell, during execution, what value has been loaded into the var?
Thanks.
John
View 3 Replies
View Related
Jan 15, 2008
Hi, when I try to open up an existing report project in VS 2005 then open the report template it will guide me to the Layout tab. Once I change the tab to Data, the following error showed up with an OK button:
TITLE: Microsoft Report Designer
------------------------------
The data extension SQL was not found in the configuration file RSReportDesigner.config.
Add the extension to the configuration file before proceeding or choose another data extension.
------------------------------
I tried creating a new dataset on the Data tab, the "Command Type" section use to have 2 selection: Text and Storeprocedure type. But now the Storeprocedure type is missing. I tried uninstall VS 2005 & SQL Server 2005 Components and reinstall them the same error still occurs.
I have no idea how to solve it, anyone encounter the same problem or able to help out please do so. Thanks in advance.
From,
Daren
View 1 Replies
View Related
Jun 30, 2015
When creating a new integration project, the data folder to create a new data source does not load.
View 5 Replies
View Related
May 23, 2006
Hi --I was wondering if this is a bug when I add new data in my table SSIS Confiurations and give wizard a new Configuration filter the package configuration wizard can not see the new values --the old values from the previous configuration are still showing---is there any known workaround or forced refresh I can do
thanks in advance Dave
Background:
SQL Package Configurations are most important because they provide the possibility of a central configuration store for your entire enterprise!!!!!!!! and is in my mind the only way to go
http://sqljunkies.com/WebLog/knight_reign/archive/2005/01/24/6843.aspx
Wizard results:
Name:
ETL
Type:
SQL Server
Connection name:
ETLConfiguration
Any existing configuration information for selected configuration filter will be overwritten with new configuration settings.
Configuration table name:
[dbo].[SSIS Configurations]
Configuration filter:
PT_CUST_ABR
Target Property:
Package.Variables[User::gsPreLoad].Properties[Value]
Package.Variables[User::gsPostLoad].Properties[Value]
Package.Variables[User::gsLoad].Properties[Value]
Package.Variables[User::gsFlatFilename].Properties[Value]
Package.Variables[User::gsFileName].Properties[Value]
Package.Variables[User::gsCDOMailTo].Properties[Value]
Package.Variables[User::gsCDOMailSubject].Properties[Value]
Package.Variables[User::giRecordCount].Properties[Value]
Package.Variables[User::giFileSize].Properties[Value]
Package.Variables[User::giBatchID].Properties[Value]
Package.Variables[User::gdFileDateCreated].Properties[Value]
Package.Connections[MyDatabase].Properties[ServerName]
Package.Connections[MyDatabase].Properties[InitialCatalog]
USE [ETLConfiguration]
GO
/****** Object: Table [dbo].[SSIS Configurations] Script Date: 05/23/2006 13:34:35 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[SSIS Configurations](
[ConfigurationFilter] [nvarchar](255) COLLATE Latin1_General_CI_AS NOT NULL,
[ConfiguredValue] [nvarchar](255) COLLATE Latin1_General_CI_AS NULL,
[PackagePath] [nvarchar](255) COLLATE Latin1_General_CI_AS NOT NULL,
[ConfiguredValueType] [nvarchar](20) COLLATE Latin1_General_CI_AS NOT NULL
) ON [PRIMARY]
View 3 Replies
View Related
Jul 2, 2007
Hi,
We have configured package to load configurations from XML file.
But whenever we try to run the package, it throws below warning message
and continues to download the configuration file and finally ending up in low memory exception
The package is attempting to configure from the XML file "E:CybageDeploymentMSCERTMSCERT_MainPackgeConfig.dtsConfig".
I have made sure the file exists at the above location.
Please let me know if anyone have any solution on this.
Regards,
sachin
View 4 Replies
View Related
Jun 24, 1999
Dear friends,
I am going to have around 20 databases of size 75 MB, each database for a company and many users may access the database simultaneously because it is a web based project. I would like to know the system configuration. ie
Processors, memory
SQL Server configurations like. dedicated memory, open objects, locks, user connections, tempdb size and other factors.
If possible suggest me any site name where I can more info on that, or any other nice book on Admin and optimisation.
Thanks in advance
Rajasekar
View 1 Replies
View Related
Mar 19, 2008
Hi,
i want to create single xml configuration file which should include the details to configure all the files in all packages.
Usually as u know whenever we configure the package one xml config file is created where we can change the path name for file or database details.
Like that we will create a xml config file for each package.
but i want the solution as on xml config file for multiple packages
View 1 Replies
View Related
Jun 8, 2007
The package works fine in development site. It was compiled with "Enable package configurations" and sql server as configuration type. But after installed in production database using deployment manifest, the package does not load the configuration values at run time from the table, instead it uses the variables' value in design time.
If the configuration is a file in windows folder, I may be able to load it from the sql job agent's step configuration tab. When configuration values are stored in a table, how can I make it load the configuration from there at run time?
Thanks.
View 5 Replies
View Related
Nov 4, 2006
Hi,
I am new to SSIS. I followed the direction of the tutorial Creating Simple ETL Tutorial package in BooksOnline. I have tried more than five times and have done exactly as suggested in the tutorial but it does not work.
The URL is:
http://msdn2.microsoft.com/en-us/library/ms169917.aspx
I get these warnings and finally fails:
1)[Lookup [30]] Error: Row yielded no match during lookup.
2) [Lookup [30]] Error: The "component "Lookup" (30)" failed because error code 0xC020901E occurred, and the error row disposition on "output "Lookup Output" (32)" specifies failure on error. An error occurred on the specified object of the specified component.
3) [DTS.Pipeline] Error: The ProcessInput method on component "Lookup" (30) failed with error code 0xC0209029. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
4) [DTS.Pipeline] Error: Thread "WorkThread0" has exited with error code 0xC0209029.
Can someone help me with this tutorial error? or Am I doing something wrong.
Thank you,
View 6 Replies
View Related
Sep 28, 2005
I am getting following error when "CreateDeploymentUtility" is set to true and I try building the solution. It tries to copy a file that already exits in inDeployment folder. I am using Sept. CTP.
View 4 Replies
View Related
Apr 3, 2007
Ok guys, I am trying to install Sql server 2005 on Vista but I am still stuck with this warning message in the System Configuration Check during Sql server 2K5 installation :
SQL Server Edition Operating System Compatibility (Warning)
Messages
* SQL Server Edition Operating System Compatibility
* Some components of this edition of SQL Server are not supported on this operating system. For details, see 'Hardware and Software Requirements for Installing SQL Server 2005' in Microsoft SQL Server Books Online.
Now, I know I need to install SP2 but how the hell I am going to install SP2 if Sql server 2005 doesn't install any of the components including Sql server Database services, Analysus services, Reporting integration services( only the workstation component is available for installation)?
Any work around for this issue?
P.S.: I didn't install VS.NET 2005 yet, can this solve the problem?
Thanks.
View 8 Replies
View Related
Feb 2, 2007
Hi,
I am planning to develop a single package that will download files from ftp server, move the files to internal file server and upload it in the database. But I want to run this package for multiple ftp file providers. For each provider the ftp server might be different and the transformation to upload the files into a database table might be different.
So can I create a single package and then multiple configuration files (xml), which will contain the details fo the ftp file providers and then pass the xml file as a parameter while executing the package. The reason being that the timings of fetching the files is different for each ftp file provider and hence cannot be combined into one.
Is this possible?
Thanks for your help.
$wapnil
View 6 Replies
View Related
Sep 10, 2007
Deployed Report having SSIS package as source do not work when Indirect Package configuration is used in ETL package. It seems ETL package when called/executed from Report manager does not recognize environment variable to pick up the dtsconfig file.
The Report works when Direct package configuration is used to same dtsconfig file.
What could be the reason? Any solution for this? This will cause our build/deployment to QA and Prod very difficult.
View 1 Replies
View Related
Sep 14, 2006
Hi guys,
Here's the deal. I have a child package, (say, pack01.dtsx), which uses a dtsconfig file for its connection string, which can be called from other packages, but which also can be called by itself.
However I also have another package (say, pack02.dtsx) which uses the same dtsconfig file for its connection string. It calls on pack01.dtsx.
When I use DTEXECUI and run pack01.dtsx, specifying the proper .dtsconfig file, it goes well. But when I try and run pack02.dtsx, an error occurs saying pack01.dtsx connection cannot be established.
How do I pass the connectionstring being used by pack02 to pack01, without having to remove the configuration file setting of pack01? Can a Parent Package configuration and a configuration file try and map to the same property?
Hope someone could help. Thanks.
View 7 Replies
View Related
May 29, 2008
For some reason in a Team Foundation Team Project that has multiple project types (SSRS, SSIS, WebSite, C# Business DLL...), the SSIS project makes itself the startup project to the team project. If I explicitly set another project as the startup project to the team project and then select an SSIS package in the SSIS project in the team project, the SSIS project becomes the startup project automatically.
I am using Visual Studio 2005 SP1.
View 3 Replies
View Related
Dec 20, 2006
Hi there all...
We've just started using SSIS packages, and everything seems to be going ok.
I've recently set up a couple of jobs which just run an SSIS package every 5 minutes to collect data.
These run fine 90% of the time, but intermittantly produce an error.
When using a SSIS task in the job it simply reported
"Could not load Package."
I have changed these to use DTExec as I heard it gave more verbose execution results, and now I get an error like
"Executed as user: NZSQLAdmin. Microsoft (R) SQL Server Execute Package Utility Version 9.00.1399.06 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 8:25:00 a.m. Could not load package "MSDBRadiusBillingGet_RADIUS_AuthLog" because of error 0x80040E37. Description: Table/view either does not exist or contains errors. Source: Microsoft SQL Native Client Started: 8:25:00 a.m. Finished: 8:25:00 a.m. Elapsed: 0.047 seconds. Process Exit Code 5. The step failed."
So far I have not been able to find anyone else with similar errors.
Whenever the package executes it seems to run fine, so this seems to be an error just getting the package to execute in the first place, and as I said it only happens internittantly.
The packages talk to a SQL2005 server using windows authentication (which I assume is inherited from the SQLAgent service user), as well as a MySQL server through an ODBC connection.
The package is saved in the MSDB SSIS Package Store and uses the "Rely on Server for Security" option
Does anyone know why this is happening and how I can fix it?
View 11 Replies
View Related
Mar 28, 2007
Hi all,
I've finished an SSIS Package on my computer and want to move the project into production server. I was just copied the whole files and when I load the package from production server there was an error occured, the description is below :
Error 1 Error loading 'SC2DC_Regular.dtsx' : The package failed to load due to error 0xC0010014 "One or more error occurred. There should be more specific errors preceding this one that explains the details of the errors. This message is used as a return value from functions that encounter errors.". This occurs when CPackage::LoadFromXML fails. . e:dw workplacesc2dc_serverSC2DC_Regular.dtsx 1 1
What's the problem with my Package, I never met this error before with the same behaviour of moving SSIS project from one computer to another.
Thanks in advance
View 5 Replies
View Related
Aug 10, 2006
Could some one please help me with this problem... After working with the Rational Guide To Scripting SSIS Beta Preview (Donald Farmer), chapter 6 Adv uses of the Script Task.. For some reason I cannot open or create any packages now... Here's a sample of the error message:
"There were errors while the package was being loaded. The package might be corrupted. Se the error-list for details" This came with an OK-button.
Error 1 - Error loading DataTransfer.dtsx: Unable to instantiate XML DOM document, please verify that MSML binaries are properly installed and registered.
Error 2 - Error loading DataTransfer.dtsx: Unable to load from XML
The Error-list has 6 errors and 2 warnings...
regards maggi
View 1 Replies
View Related
Mar 6, 2006
Hi Guys,
Here's the current scenario:
I am creating a windows application to manage my ssis packages.
My SSIS packages use package configurations, and by default connect to the "SSIS Configurations" table in sql server.
However, I want it to connect to a view instead of this table, so i create a view "vwSSIS_Configurations" and point the package configuration to use the view in sql server.
The application SHOULD be capable of altering the package configuration's configuration and switch its connection between the default "ssis configurations" table, and the view.
Is this possible? I cannot think of a way which I can have my application switch the package configuration's connection.
Thanks,
kervy
View 3 Replies
View Related
Apr 9, 2008
I had encountered an error on SSIS its not allowing me to create any new packages. Below is the error message. Please do help be out.
This problem had occurred on my server machine
Error 1 Error loading Package.dtsx: Error loading value "<DTSroperty xmlnsTS="www.microsoft.com/SqlServer/Dts" DTS:Name="CreationDate"
DTSataType="7">08.04.2008 4:39:55 PM</DTSroperty>" from node "DTSroperty".
c:documents and settingssrmohammedmy documentsvisual studio 2005projectsdictaphone_synchronizationdictaphone_synchronizationPackage.dtsx
View 3 Replies
View Related
Dec 6, 2007
Hi all,
I have problem with SSIS. When I open my packages, I always get an error message which says like this:
There were errors while the package was being loaded.
The package might be corrupted.
See the Error List for details.
And, in error list, I get this error message:
Error loading DIM_BUSINESS_TYPES.dtsx: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E4D. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E4D Description: "Login failed for user 'user'.".
But the package itself seems doesnt have any errors at all. When I try to run the package, it runs fine.
Btw, I use package configuration which is stored in sql server table, including the password for connectionstring.
So, what's actually wrong with my package?
Thanks
View 10 Replies
View Related
Dec 7, 2005
I have written package which goes through a directory and load all the files with certain criteria. I have set the package to run using package configuration. It does work fine.
View 4 Replies
View Related
