I have this problem when i go to http://<servername>/reprots
"The attempt to connect to the report server failed.Check your connection information and that the report server is a compatible "
I dont have any problem viewing the deployed reports from the site, http://<servername>/reportserver. only issue is in viewing report manager.
i have searched the forums and did all the suggested changes required in the config file, by adding the full report url and removing the entries in the virtualdirectory tag. still it didnt help....
When we assign security in SRS, in the user name field we have to type the domainusername manually. We cannot see the drop down of all the users in Active directory. Is it possible to configure SRS to get the names from Active directory. If we add any new users to our AD, it automatically refreshes at certain set intervals. I am talking to a similar function in Sharepoint. I browsed through a bit on this and think it is not possible. But I want to make sure that I am on the right path.
Can you please correct me if my understanding is right?
I appreciate your help and thank you for your time,
I have searched the web and have not had any luck on finding the issue to my problem. I'm sure it's probably simple, so here it goes.
When receiving the following error "The permissions granted to user '' are insufficient for performing this operation"
Now, I would like to add to the error message shown above an extra line below it on the web page to reflect something like "Please contact XXX @ XXX if you feel that you need to have your login issue resolved" ...or something meaningful in addition to the default error messages.
I am not getting this error normally, as I have made a typo when login in on purpose! I am just trying to find a way to add more detail to the current error message or change the message to what I want it to say. This would go for any error message received by an end user received through SQL Server 2005 Reporting Services.
Do I have to create some sort of filter to read the message coming back from within SOAP? Are these messages stored in ReportingServices database or htm file?
I am using SSRS 2008 R2. On my SSRS machine. I went and created the SQL Alias (both for 32 bit and the other one).
Then I ran the SSRS configuration wizard and tried to configure the SSRS service to create a report server database by using a SQL Alias.
It connects to the DB fine but at the last step it gives an error saying no such host. How to configure SSRS Service when they used an alias for the sql server?
I am trying to automate the setup of SQL server 2014 Standard edition with SSRS. To avoid SSRS being setup using the default port 80 for the webservice and report manager url's, I've chosen to install SQL server with the setting RSINSTALLMODE="FilesOnlyMode" and then use powershell to do the final setup steps.To setup the ReportServer database, I use the "GenerateDatabaseCreationScript" method available in the "MSReportServer_ Configuration Setting" class.
This succeeds without problems however when I use my browser to connect to the web service or report manager url's, I get a "rsInvalid Report Server Database" and a "rsReportServerDatabaseUnavailable " error, respectively.Running the stored procedure named GetDbVersion in the ReportServer database returns "C.0.9.45". If I delete the ReportServer database and then recreate it database manually with the Report Services Configuration manager, the same stored procedure returns "162".
So it seems to me there's a problem with the GenerateDatabaseCreationScript but I can't find any information on this. How can I automate the setup of SSRS and ensure it does not use port 80? There are many manual solutions involving multi-step GUI solutions but the key for me is to automate this with powershell which doesn't appear to be possible.
Hello, I have a question regarding installing SQL Express with Advanced Services from the command prompt. I am executing a .cmd file which has the following syntax:
Yet, after the installation when I run the Reporting Services configuration tool, none of the settings for Reporting Services are set. I would like to be able to install Reporting Services from the command prompt and have it use the default settings for creating a default website just like you can through the User Interface using the Setup.exe but cannot seem to figure out what I am missing in my .cmd file?
I am trying to follow the instructions on: http://technet.microsoft.com/en-us/library/bb677365.aspx they contain many "if"s and links to other sites and I got totally confused and stuck. The idea is - I need to have one machine with SQL for reporting services and SharePoint databases and the reporting services and the other machine for a complete SharePoint installation (the main server of the farm)
Now I have done the following: two servers (lets call them SQL and MOSS)
The domain contains the following users: sqlservices: for running all the SQL services and reporting services moss: for administering MOSS databases moss-services: for running all the MOSS services Machine SQL - installed Windows Server 2003 Standard Edition SP1, joined to the domain as SQL The following is done from a local Administrator account: IIS 6 with ASP.NET installed SQL Server 2005 with SP2, Reporting services installed but not configured all the services are running as domainsqlservices .NET 3.0 installed http://support.microsoft.com/kb/918642 fix installed done WINDOWSMicrosoft.NETFrameworkv2.0.50727aspnet_regiis €“i MOSS as Web Front installed, not configured
Machine MOSS - installed Windows Server 2003 Standard Edition SP1, joined to the domain as MOSS The following is done from a local Administrator account: IIS 6 with ASP.NET installed .NET 3.0 installed http://support.microsoft.com/kb/918642 fix installed done WINDOWSMicrosoft.NETFrameworkv2.0.50727aspnet_regiis €“i Computers->My computer->DCOM Config->IIS WAMREG admin Service->PropertiesSecurity->Customize->Edit, added domainmoss-services and domainMOSS users with rights Local launch, Local activate MOSS Complete installed, configured for: New server farm Database server: SQL Username: domainMOSS Port: Default Auth: NTLM SharePointRS.msi installed to enable RS in SharePoint Admin page Then temporarily gave to the user domainMOSS sysadmin rights in the SQL server on the SQL machine to avoid errors with creating databases while configuring SharePoint from the Admin Portal. From the Admin Portal configured Office SharePoint Server Search with domainmoss-services account Shared Services Administration €“ New SSP created with 2 separate web apps for SSP and MySites, both app pools run as domainmoss-services and SSP itself runs as domainmoss-services Windows SharePoint Services Search configured, Service Account - domainmoss-services, Content Access Account - domainmoss-services
Everything went OK.
Now came back to the machine SQL: run Reporting Services Configuration and: Report Server Virtual Directory €“ created new, called it ReportServer. When hit Apply, the applicatin suddenly quit, but I checked €“ the Virtual Directory was registered on the IIS and working. Checked if Windows service identity is domainsqlservices, OK. Web service identity: Application Pool: New Name: ReportServer Windows Account: domainsqlservices Apply, everything went fine.
Database setup: choose server SQL, Connect Database name: New name: ReportServer, checked Create the report server database in SharePoint Integrated Mode OK Credeantials Type - Service credentials (I guess it means previously set domainsqlservices will be used) Apply,OK, everything went fine.
Launch SharePoint Products and Technologies Configuration Wizard, Connect to an existing farm, Database server: SQL, Retrieve datbase names: selected SharePoint_Config, Username: domainMOSS, Next, everything fine here.
Now as far as I understand I need to give reporting services an access to SharePoint databases? Went to the machine MOSS, launched SharePoint 3.0 Central Administration:
Application Management-> Reporting Services-> Manage integration settings, URL: http://SQL/reportserver, Windows Authentification, OK then back, Grant database access-> Server Name: SQL, OK, now it is asking for credentials. And now the problem: no matter what I enter (domainsqlservices, domainMOSS) I get a message: €žA connection to the computer cannot be established€?. Why, why, why? I can ping the server, SharePoint services are running fine and they are using the SQL server on the SQL machine and there are no errors in the event viewer (they should be if there were any problems to connect the SQL databases). If I enter wrong credentials, I receive "Unable to log on with the given username and password.", so I guess there IS a connection to the computer (or how else could SharePoint determne that login is wrong?).
Also, if I open http://SQL/reportserver, I get €žThe report server has encountered a configuration error€? and the log in C:Program FilesMicrosoft SQL ServerMSSQL.2Reporting ServicesLogFiles says €žSharePoint content service is null. Report Server may not have joined the SharePoint farm, or Report Server service account may not have been granted access to farm.€? I guess it is OK while I have not granted access to the SharePoint databases? Please, show me, what did I do so wrong that €žA connection to the computer cannot be established€?? How can I grant the access and finalize configuring Reporting Services? Thanks.
im having a problem that a few people seemed to have had already. The problem is again related to the Web Service Identity.
Windows Server 2000, IIS 5.0, SQL Server Express 2005 Adv, and Microsoft.Net 2.0
after installing SQL Server Express 2005 when i launch the Reporting Service Configuration it could not connect to the Server as the Reporting Service was not running.
In order to get the Reporting Service running i had to modify the rsreportserver.config file in the C:Program FilesMicrosoft SQL ServerMSSQL.2Reporting ServicesReportServer directory. Here i modified the added the following
this was due to no SKYREVASPNET account being available on the server machine. (based on this article http://support.microsoft.com/default.aspx/kb/911846)
Once i changed this i could now get the Reporting Service running and access the configuration tool.
So now we come to my current problem. In the Web Service Identity it shows an exclamation. Here the ASP.net as SKYREVASPNET and when i attempt to apply this i get the following error:
ReportServicesConfigUI.WMIProvider.WMIProviderException: The account name is not valid. Specify an account in the form domainalias.
at ReportServicesConfigUI.WMIProvider.RSReportServerAdmin.SetWebServiceIdentity(String applicationPool)
I have installed reporting services for 64 bit SQL and I am having a problem configuring it correctly so that I can access the reports manager on http://localhost/reports.
I have studied various SQL server 2005 bibles and looked at information on the microsoft support site but nothing seems to be helping me.
I get the impression that it could be a problem with the IIS server.
Can anyone give me a complete run down on how to set up and configure the reporting services so that it will actually work. Every step of the way please.
I have been trying to configure SQL Server 2005 Report Services. Every time I create the ReportServer database, the systems asks me if I want to "update" the database. It allows me no other option. When I click "apply", I get the message that the database version does not match my installation version. Does anybody have any insight into what happening with the configuration? What's more, do you have a solution?
I have congigured Reporting Service for Sharepoint Integrated Mode adn Created new Reprot Server DB
Sahre Point Integration is Green and verified link
In Sharepoint Central Administration
Manage Reporting Service Integratio i have selected the URL and "Trusted Account" as my web applications use "Windows Integration - NTLM".
All services, DB access everything running under one domain user account.
I am logged into sharepoint with same account. When clieck on set server defaults i get following error
An unexpected error occurred while connecting to the report server. Verify that the report server is available and configured for SharePoint integrated mode. --> Server was unable to process request. ---> The request failed with HTTP status 401: Unauthorized.
Same error when i try to add a report to a sharepoint webapplication
The domain account is part of "Farm Administration", "site colletion administrato" and local administrator also on both servers.
I'm Getting "Report Server WMI Provider error: Not Found" when trying to Grant Database Access while configuring the Reporting Sevices Integration. Logging in fine to the DB. Tried all the WMI troublshooting and can't find any issues there. Any tips?
I am trying to migrate my reports from SQL server 2000 reporting services 32bit to 2005 64bit. I am following the migration steps that MS specified. Restored my Reportserver and ReportserverTempDB databases Then I was using the configure Report services to upgrade these databases but I always end up getting the follwoing exception when I run the upgrade on the "Database Setup" configuration for 'ReportServerTempDB' database System.Data.SqlClient.SqlException: Could not locate entry in sysdatabases for database 'ReportServerTempDBTempDB'. No entry found with that name. Make sure that the name is entered correctly. at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async) at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe) at System.Data.SqlClient.SqlCommand.ExecuteNonQuery() at Microsoft.ReportingServices.Common.DBUtils.ApplyScript(String connectionString, String script) at ReportServicesConfigUI.SqlClientTools.SqlTools.ApplyScript(String connectionString, String script)
It's driving me crazy, why is it looking for 'ReportServerTempDBTempDB' in the catalog instead of 'ReportServerTempDB'? Is it possible to migrate from 32bit to 64bit?
I'm attempting to obtain a cost effective solution for my existing customers to develop reports on their SQL 2000 Server installations using their Reporting Services 2000. With products like Visual Basic.NET 2003 becoming almost impossible to obtain, I have at least one customer who is running into a dead end.
One option possibly is the SQL Express with Advanced Services download, which has Reporting Services. My questions are as follows:
Can the report designer component of SQL Express Reporting Services be configured to connect to an external database (which would happen to be a SQL 2000 database) to establish its datasets? Does the resultant designed report end up in an RDL file? If the customer published this report via the Reporting Services 2000 Report Manager, would the report be able to run?
Sorry for asking a question like this that I could probably answer on my own, but my customer needed this answer yesterday. I have scoured the web and microsoft sites - and posted a question on the official SQL Reporting Services cateogy ... in an attempt to answer the basic question of how to design reports for Reporting Services 2000 in the absence of Visual Basic.NET 2003 (or other .NET 2003 tools) with no success.
I work in a big project and we will begin in using reporting services as the base technique for reports and I will be responsible for this part. but I have a problem I will discuss in the following:
Currently: We use currently devexpress reports and we have 2 languages(Arabic and English). the data in tables saved in two ways (Arabic and English). when the end user change the language of the web site the report data language changed when run it.
Example:
we have table with (ID, NAME_AR, NAME_EN, JobTitle_AR, JobTitle_EN). designed report will display(ID, NAME_EN, JobTitle_EN) . but the end user change the language of the system the report will
Our DBA has installed reporting services on a server and now in order to access the report manager, one has to be an Admin on that Server. I am guessing that there is a mistake in the configuration of Reporting Services. Usually it should allow anybody who was added to the roles in the properties section of the Report Manager, right? I have also added the users to the DB..
Also I am using Windows Authentication to access Report Catalog items (Reporting Services is installed on Server2) from a web Application(deployed on Server1) and displaying the report using report viewer. For some reason, server1 has to be in an Admin role on Server2 to access the report catalog/report. This is kinda strange for me as I don't want everybody to be an Admin on Server2. Can anybody please point in the right direction?
We have installed SQL Server 2005 with reporting services.When tried to open getting errors as below: how to avoid such errors See the end of this message for details on invoking just-in-time (JIT) debugging instead of this dialog box.
ReportServicesConfigUI.WMIProvider.WMIProviderException: A WMI error has occurred and no additional error information is available. ---> System.Runtime.InteropServices.COMException (0x8000000A) Â at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo) Â [code]...
I have some problem about reporting service add-in.
After I install reporting service add-in for SharePoint, reporting service menu does not appear in Application Management Tab in SharePoint Central Administration.
I try to uninstall and re-install again, it remain not work.
We've got a requirement to build the real time report. user can browse report at any point of time and need to see the latest data(stock market) in the report.
I've few options down...
1. Directly point to OLTP database as source and write stored procedure to show result set.
2. Replicate the database and write the SP's to reports. To avoid pointing directly to OLTP db.
3. To build the datawarehouse with dim & facts to show it in reports. I prefer this as a standard method, but this would have some latency depending on trasaction load which will differ from the requirement.
We are required to gather certain information regarding reporting services.
Which reports were requested, by whom , how long did they run for, what parameters were passed etc etc.
I see that the system tables do provide some of this information, is there a 3rd party tool or something we can use to gather all this type of information for us?
Hi, I have just install SQL 2005 SP2 and trying to get Window SharePoint Services V3 integrated with SQL 2005 SP2 reporting services. In SharePoint Central Administration, I select the Reporting Services Integration page and have setup the Report Server Web Service URL and Authentication Mode. I then goto Grant database access, specify the SQL server name, get promted for a username and password that has access SQL Reportserver and get the following error "The group name could not be found" Does anyone have any ideas? Thanks
We built our prod server [vm] with SQL Server 2008 R2 on Server 2008 R2. It works nicely. Then we made a copy of the VM and renamed it (so our test environment would be IDENTICAL to production). After that, SSRS was broken: I get "HTTP Error 503. The service is unavailable." I can't connect via http, or SSMS.
We have tried:
*Â Running SSRS config tool (several times)
* Running with/without the IIS Server Role
*Â Dropping & recreating the SSRS keys
*Â Recreating the ReportServer database, etc
*Â Checking all of the accounts, permissions, etc
*Â Running SQL Repair
*Â Going through the registry to fix any references to the machine's old name
*Â Uninstalling, reinstalling SSRS
* Completely uninstalling ALL of the parts of SQL Server 2008 R2, deleting all directories, removing references to SQL Server from the registry, rebooting, reinstalling everything.
None of this has worked. SSRS [R2] is still 503 on our test box.
the SSRS [NT] service seems to run, without error. The Event Viewer doesn't seem to be recording any errors. The SSRS logs say that the default URL is wrong, but we get the same error in Prod, and Prod works fine. The other SQL Logs say something about not being able to contact the service. However, as I said, the [NT] service seems to be working fine.
I think I've seen a similar post on a blog or on the forums - but it seems like this should be possible -
I have an MDX query - that works fine in SQL Enterprise Manager, and has my dimension members on columns, and my measures on the rows. When I try the same query in Reporting Services, I get the error:
"The query cannot be prepared: The query must have at least one axis. The first axis of the query should not have multiple hierarchies, nor should it reference any dimension other than the Measures dimension.. Parameter name: mdx (MDXQueryGenerator)"
Although it works when you pivot the view, I really need my data presented with the members on the columns and the measures on the rows. Another forum post mentioned using the SQL 9.0 driver, but I can't see this listed anywhere (the only one I see is the .NET framework Data Provider for Microsoft Analysis Services).
Here's what my query looks like -
SELECT { [Time].[Month].&[2006-09-01T00:00:00] , [Time].[Month].&[2006-10-01T00:00:00], [Time].[Month].&[2006-11-01T00:00:00], [Time].[Month].&[2006-12-01T00:00:00] } on COLUMNS, { [Measures].[Unique Users], [Measures].[UU Pct 1], [Measures].[UU Pct 2], } ON ROWS FROM [Cube]
I'm trying to create reports in RS2005 using AS2000 as my data source. I understand that if I use RS2005 on AS2000, I wont be able to enjoy the OLAP based parameters as in using AS2005. Does anyone know an easy way to easily use Parameters in RS2005 while still using AS2000?
I'm using Reporting Services 2005 SP1 and wrote some code to render reports server-side. My sample report has few parameters that must be passed so I pass these parameters with code.
byte[] report = rs.Render("PDF", "<DeviceInfo><Toolbar>False</Toolbar></DeviceInfo>", out extension, out mimeType, out encoding, out warnings, out streamID); </My code>
Actually, I have several more parameters but I've checked the collection and all the parameters I want are there and have values. Their names match those found in executionInfo.Parameters. But when I run my code I get the following error on Render():
<Error> "This report requires a default or user-defined value for the report parameter 'pClass'. To run or subscribe to this report, you must provide a parameter value. ---> This report requires a default or user-defined value for the report parameter 'pClass'. To run or subscribe to this report, you must provide a parameter value. ---> This report requires a default or user-defined value for the report parameter 'pClass'. To run or subscribe to this report, you must provide a parameter value." </Error>
I've double-checked and my parameter array does have the problematic parameter, I passed it a value but when I check executionInfo.Parameters I see that it's the only parameter that hasn't been give a default value after calling SetExecutionParameters(). So my parameters do seem to be passed but one seems to refuse getting a value. If I comment out the SetExecutionParameters() line I get, as expected a similar error but on another parameter (first one in the executionInfo.Parameters collection). So I'm left to beleive that the SetExecutionParameters() has some kind of bug as it works for all but one parameter. I've checked casing, spelling, tried passing phony parameters and from what I've seen I should be getting an error when I pass the parameters if I got something wrong.
I am invoking RS web services to render reports, using Apache Axis to generate stub classes from Reporting Service WSDL.
Please let me know if I can integrate Report Viewer control in the jsp where I am writing the report output. Else do I have to create my own custom tags simulating ReportViewer functionality.
My requirement for the parameter is multivalue parameter with a text box. for example when user enters aa15 it need to include product aa15. when the user enters aa15, aa16, zz15 than it needs to include all the three products. the last case is when the user enters AA** than i need to inclued all the products start with AA. when i use default multivalue parameter with data source analytical services than i am getting a drop down box. I dont want that. I need a text box where user can enter the value. 1. In sql we have a like key word to query . for example select * from product where product like "AA%". what is equavalent mdx query to get such results ? 2.How to impliment the multivalue parameters without using dropdown box?
I am facing sever Refresh issue in PPS Reports. I have Two Dashboard
Dashboard_One and Dashboard_Two
I have few Filters on both the Dashboard .
In Dashboard_One I have 2 Filters
1)Year filter where Year 2012 is my Default value 2)City Filter where "CityOne" is Default Filter Value
If I select Year"2010" in Period Filter and "CityTwo" In City Filter.I see Related reports . Now I navigate to Dashboard_Two to See Other Reports where I have few Other Filter Like "Country" where I select "CountryThree" . When I navigate Back to Dashboard_one I do not see Dashboard with Default value given to them
I still see Filter value Year=2010 and CountryFilter="CountryTwo" in Dashboard Dashboard_One .. where as I should have seen it based on the Default value given to the Filter.. How should I resolve this refresh issue which I am facing in PPS Dashboard. I do not see Default value in the Filter ,It always give the filter value which was selected later when Navigated back.
I started my Reporting Server and if I use the Internet Explorer as a Administrator everything works fine.But if I don't open it as an admin it calls "rsAccess Denied The user [...] does not have the permission...".Problem is that I want to run it in an SAP Program with an HTML Viewer. how I can get those Permissions ?By the way somehow I'm not able to create or change roles in the Microsoft SQL Server Management Studio.
