Conversion Failed When Converting The Nvarchar Value Xxxxxxxx To Data Type Int
Sep 4, 2007
I am using Sql server 2005, Asp.net 2.0. In my application i have to store a mobile number in database, and in table it is declared as nvarchar(50) (datatype). In stored procedure as it is nvarchar(50). In my code , stored procedure is called in a function. In that while executing project error is coming as (cmd.ExecuteNonQuery)
Conversion failed when converting the nvarchar value xxxxxxxxx to data type int.
Kindly give your suggestions to solve this problem.
I can't seem to fix the following error in my stored procedure.
Error Message: Conversion failed when converting the nvarchar value '1007-001' to data type int.
The line of code in my stored procedure that seems to be the problem is the following:
CASE WHEN [Order Details].[Job No] IS NULL THEN [Orders].[Order No] ELSE [Order Details].[Job No] END
Order No has a data type of INT and Job No has a data type NVARCHAR(8). In the above case statement i'm not trying to convert anything but just display a column depending on the out come of the case statement. If anyone knows how to get around this error you help would be very welcome.
I want to get Email address from sql database. But whenever I executed stored procedure I get an error message "Conversion failed when converting the nvarchar value 'xxxxxx@xxxxxx' to data type int" If I want some numeric ID it is worked.
I also change my SP like this but results same.
ALTER procedure [dbo].[findConsultantMail]
(
@PerID nvarchar(18),
@perMail nvarchar(100) OUTPUT
)
as
SELECT @perMail=PerMail FROM Personel
WHERE (PerID =cast(@PerID as numeric(18,0)))
return cast(@perMail as nvarchar(100))
How can I get a string value form stored procedure.
My query was working fine until I added the yellow highlighted areas below. Basically what I'm doing with this is getting the lowest open purchase order number (docnum) and its matching docduedate. Now when I run it I get
Conversion failed when converting the varchar value 'po_num' to data type int.
Any ideas? Thanks!
SELECT t3.product ,
t7.itemname ,
t2.u_vlgx_plc,
t3.shorted ,
t4.onhand ,
MIN(
CASE
WHEN t8.linestatus = 'O'
THEN t9.docnum
ELSE NULL
END) po_num,
t10.docduedate
FROM
(SELECT t0.product product ,
SUM(
CASE
WHEN t0.qty_topick <> t0.qty_picked
THEN t0.qty_topick - t0.qty_picked
ELSE 0
END) shorted
FROM rbeacon.dbo.shipline2 t0
INNER JOIN rbeacon.dbo.shiphist t1
ON t0.packslip = t1.packslip
WHERE t1.date_upld = CONVERT(VARCHAR(10), GETDATE()-1, 101)
GROUP BY t0.product
) t3
INNER JOIN comparison.dbo.vlgxplc t2
ON t2.itemcode = t3.product COLLATE Latin1_General_CI_AS
LEFT JOIN
(SELECT t0.product AS product,
SUM(t0.quantity) AS onhand
FROM rbeacon.dbo.binlocat t0
GROUP BY t0.product
) t4
ON t3.product = t4.product
INNER JOIN wbau.dbo.oitm t5
ON t3.product = t5.itemcode COLLATE SQL_Latin1_General_CP850_CI_AS
LEFT JOIN wbau.dbo.ocrd t6
ON t5.cardcode = t6.cardcode
INNER JOIN wbau.dbo.oitm t7
ON t3.product = t7.itemcode COLLATE SQL_Latin1_General_CP850_CI_AS
LEFT JOIN wbau.dbo.por1 t8
ON t3.product = t8.itemcode COLLATE SQL_Latin1_General_CP850_CI_AS
I try to compile your query, and prompt error message in below 'conversion failed when converting the varchar value 'times' to data type int .Error code 245.
select user_member , sum(case when trx_date > dateadd(month, -3, getdate()) then 1 else 0 end) + ' times' , max(case when trx_date < dateadd(month, -3, getdate()) then trx_date else NULL end) from trx_hdr group by user_member
CASE WHEN NULLIF(NHSNo2, '') IS NULL THEN 1 WHEN NULLIF(Surname, '') IS NULL THEN 2 WHEN NULLIF(Forename, '') IS NULL THEN 3 WHEN NULLIF(DOB, '') IS NULL OR DOB < '01/01/1900' THEN 4 WHEN NULLIF(AddressLine1, '') IS NULL THEN 5
[code]...
The above code worth great but ideally instead of returning a number Id like to return text for example
i am trying to run to get a list of computers from a table based on the available free space. I'd like to group them based on the available space, for example, up to 1 GB, 1-2 GB, etc.
However when i run this query, i get an error : Msg 245, Level 16, State 1, Line 1 Conversion failed when converting the varchar value '1GB To 2GB' to data type int.
Hi, I was using a Store Proc and it was working nice , Now, I am getting this error as:
Conversion failed when converting the varchar value 'APCCE' to data type int Is that should make any problem as well Just want to know ..the help Thanks
I am newbie in asp and sql, and I am using VS & SQL expresswhen I try to submit I get following error"Conversion failed when converting character string to smalldatetime data type"Following is my insert statement<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:oncallConnectionString %>"SelectCommand="SELECT data.* FROM data" InsertCommand="INSERT INTO data(Apps, Location, Impact, System, Date, Start_Time, End_Time, Duration, Problem, Cause, Solution, Case, Comments) VALUES ('@DropDownList1','@DropDownList2','@DropDownList3','@TextBox6','@DropDownCalendar1','@DropDownCalendar2','@DropDownCalendar3','@TextBox1','@TextBox2','@TextBox3','@TextBox4','@TextBox5','@TextBox7')"></asp:SqlDataSource>These are @DropDownCalendar1','@DropDownCalendar2','@DropDownCalendar3' defined as datetime in database.I would appriciate if somebody could help.
Hello, I have problem with this code.(This program presents - there is GridView tied to a SQL database that will sort the data selected by a dropdownList at time categories. There are 2 time categories in DropDownList - this day, this week. Problem: when I choose one categorie in dropDownlist for examle this week and submit data on the server I got this error. Conversion failed when converting character string to smalldatetime data type. Here is code: <%@ Page Language="C#" %> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <script runat="server">
I am running the following query: select distinct hqvend, hqvprd,fprod,idesc,ilead,sum(cast(fqty as int) )as fqty, (cast(hqvend as varchar(5))+'/'+ltrim(rtrim(fprod))+'/'+cast(ilead as varchar(3))) as Keydata,'L1/'+rtrim(fprod) as LocPartno from tblkfpl01 inner join hqtl01 on (fprod=hqprod) inner join iiml01 on (hqvend=ivend and hqprod=iprod) where cast(cast(hqeff as varchar(8)) as smalldatetime) <= (Select CONVERT(varchar(8), getdate(), 1)) and cast(HQDIS as varchar(8)) >= (Select CONVERT(varchar(8), getdate(), 1)) and hqvend like '134%' group by hqvend,fprod,hqvprd,idesc,ilead order by hqvend,fprod The bold sections are giving me the error message. The query works as written above, butis only evaluating on one date, contained in hqeff. However, when I try to modify the second date, HQDIS, by casting it the same way as the one before it: select distinct hqvend, hqvprd,fprod,idesc,ilead,sum(cast(fqty as int) )as fqty, (cast(hqvend as varchar(5))+'/'+ltrim(rtrim(fprod))+'/'+cast(ilead as varchar(3))) as Keydata,'L1/'+rtrim(fprod) as LocPartno from tblkfpl01 inner join hqtl01 on (fprod=hqprod) inner join iiml01 on (hqvend=ivend and hqprod=iprod) where cast(cast(hqeff as varchar(8)) as smalldatetime) <= (Select CONVERT(varchar(8), getdate(), 1)) and cast(cast(HQDIS as varchar(8)) as smalldatetime) >= (Select CONVERT(varchar(8), getdate(), 1)) and hqvend like '134%' group by hqvend,fprod,hqvprd,idesc,ilead order by hqvend,fprod I get the error message. I need to select based on both dates (hqeff AND HQDIS), but cannot seem to be able to it.... Both fields are of type Dedimal, with a length of 8, and dates stored in them look like: 20071003 (YYYYMMDD). Any suggestions?
I am doing a Case statement to create a unified field for account type and vendor, in the code below I am receiving the error in the subject, because the account numbers have alpha characters in the string, I need to make them as OTHER if the first 2 left chars are Alpha, I thought how I have ISNUMERIC would do that but I am still getting the error.
I am also including example of how the account_numbers are formatted.
I have SQL Server 2005 database table with the following data definition as follows:
ID int LST_TIME varchar(5) LST_DATE varchar(21) LST_WEEK int SUBJECT varchar(100)
Date format (Month,day YEAR) eg.- October, 21 2007 Time format, 00 - 23 hours, HH:MM eg. - 18:58
, and a VB code as below:
Dim Command As New SqlClient.SqlCommand("SELECT * FROM dbo.LISTS WHERE (LST_WK = DATEPART(wk, GETDATE())) AND (CONVERT(datetime, LST_DATE) = CONVERT(datetime, CONVERT(varchar, GETDATE(), 110))) AND(CONVERT(smalldatetime, LST_TIME) = CONVERT(smalldatetime, CONVERT(varchar(5), GETDATE(), 108)))", conn)
Dim dataReader As SqlClient.SqlDataReader = Command.ExecuteReader(CommandBehavior.CloseConnection) While dataReader.Read()
Dim NewAlert As New Alert(dataReader("SUBJECT").ToString(), DateTime.Parse(dataReader("LST_DATE").ToString(), DateTime.Parse(dataReader("LST_TIME").ToString())))
: : : I am encountering error: System.Data.SqlClient.SqlException: Conversion failed when converting character string to smalldatetime data type, which points to the codes in bold. Just wondering anyone out there has got a solution to my problem. Thank you.
Recently i traspased a database from sql server 2000 in spanish to sql server 2005 in english. I change the language of the user sa to spanish and the database is in spanish. . The problem is our dateformat is dmy, i try to force with set dateformat dmy, but always i execute a stored procedure that have a date as input it fail. The error is:
Msg 295, Level 16, State 3, Procedure pa_CalendarioGestion, Line 40 Conversion failed when converting character string to smalldatetime data type.
The code of stored procedure in this line is:
set @diaActual = dateadd("d", @i, @fechaInicio)
This stored procedure in sql server 2000 in spanish not have any problems. For this reason i think the problem is in the configuration.
One of my clients decided to put letters into their customers' account numbers. They have a numbering scheme where all temporary accounts have a letter in the account OR are numbered greater than 33000, and all permanent accounts are all digits and less than or equal to 33000. all primary accounts have a NumberSuffix of 000.
Now i am tasked with retrieving all primary, non-temp accounts. I cannot simply do WHERE Number <= 33000 because when it gets to an account containing a letter like "00A01", it craps out and says "Conversion failed when converting the nvarchar value '00A01' to data type int."
So decided to run a filtering query first to filter out all accounts with letters, and then from that dataset select all accounts <=33000.
WITH members (FirstName, LastName, Number, NumberSuffix) AS ( SELECT dbo.Entity.FirstName, dbo.Entity.LastName, dbo.Entity.Number, dbo.Entity.NumberSuffix FROM dbo.Entity WHERE NumberSuffix = 000 AND Number NOT LIKE '%A%' AND Number NOT LIKE '%B%' AND Number NOT LIKE '%C%' AND Number NOT LIKE '%D%' AND Number NOT LIKE '%E%' AND Number NOT LIKE '%F%' AND Number NOT LIKE '%G%' AND Number NOT LIKE '%H%' AND Number NOT LIKE '%I%' AND Number NOT LIKE '%J%' ) SELECT * FROM members WHERE Number <= 33000 ORDER BY Number when i do this, i get the same error for some reason. Yet when i execute this at the end instead: SELECT * FROM members WHERE Number LIKE '%A%' ORDER BY Number i get an empty set (meaning it actually does get filtered). but somehow it still able to participate in a range comparison?
Okay, I have the following store procedure and I kept getting an error.
Code Block ALTER PROCEDURE [dbo].[Search] -- Add the parameters for the stored procedure here @schoolID int = NULL, @scholarship varchar(250) = NULL, @major varchar(250) = NULL, @requirement varchar(250) = NULL, @debug bit = 0 AS BEGIN -- SET NOCOUNT ON added to prevent extra result sets from -- interfering with SELECT statements. SET NOCOUNT ON; -- Insert statements for procedure here Declare @SQL as Varchar(4000); Declare @Params as Varchar(3000); Set @SQL = N'SELECT * FROM [scholarship] WHERE [sectionID] = ' + @schoolID; Set @Params = N'@scholarship VARCHAR(250),@major VARCHAR(250),@requirement VARCHAR(250)' If @scholarship IS NOT NULL Set @SQL = @SQL + N' AND [scholarship].[schlrName] LIKE + ''%'' + @scholarship + ''%''' If @major IS NOT NULL Set @SQL = @SQL + N' AND [scholarship].[Specification] LIKE + ''%'' + @last + ''%''' If @requirement IS NOT NULL Set @SQL = @SQL + N' AND ([scholarship].[reqr1] LIKE + ''%'' + @requirement + ''%''' If @requirement IS NOT NULL Set @SQL = @SQL + N' OR [scholarship].[reqr2] LIKE + ''%'' + @requirement + ''%''' If @requirement IS NOT NULL Set @SQL = @SQL + N' OR [scholarship].[reqr3] LIKE + ''%'' + @requirement + ''%''' If @requirement IS NOT NULL Set @SQL = @SQL + N' OR [scholarship].[reqr4] LIKE + ''%'' + @requirement + ''%''' If @requirement IS NOT NULL Set @SQL = @SQL + N' OR [scholarship].[reqr5] LIKE + ''%'' + @requirement + ''%'')' If @debug = 1 PRINT @SQL Exec sp_executesql @SQL, @Params, @scholarship, @major, @requirement END
And I kept getting this error:
Msg 245, Level 16, State 1, Procedure Search, Line 28
Conversion failed when converting the nvarchar value 'SELECT * FROM [scholarship] WHERE [sectionID] = ' to data type int.
I am new to SQL and trying my hand at what I thought would be a simple query to bring back the loan products that are not HMDA reportable - hence the NOT IN and I get an error message after adding the NOT IN...I have read a lot of responses to the issue of an error message of 'Conversion failed when converting the nvarchar value' to try and solve the error - and have had no luck. Before I throw my laptop out the window..Here is the error message along with what I thought was a simple query; Conversion failed when converting the nvarchar value '80/10/10' to data type int.Here is the query;
SELECT P.ProductID, P.Name, PC.Name AS [Product Group], LP.Name AS [Loan Purpose], CASE WHEN LP.IsHMDAReportableFL = 0 THEN 'No' ELSE 'Yes' END AS [HMDA Reportable],
I am trying to write a query that give me how many items were filed per year.
This is the error:
Conversion failed when converting the varchar value 'YEAR(1999)' to data type int.
Here is the query I am using:
SELECT COUNT (*), CASE WHEN ChargesFiledDate > 20141231 THEN 'YEAR (2015)' WHEN ChargesFiledDate > 20131231 THEN 'YEAR (2014)' WHEN ChargesFiledDate > 20121231 THEN 'YEAR (2013)' ELSE YEAR (0000)
[Code] ...
And got the same error. I know there is probably a better way to get this data (being that I need it from 2007 to present), but don't know how to write it.
declare @localtab INT SET @localtab = (SELECT Convert(INT,('select count(*) from ' + @specificDB+'.'+'INFORMATION_SCHEMA.Tables WHERE TABLE_TYPE = ''BASE TABLE'' AND Table_name = ' + @tablename))) Print @localtab Print @localtab
----
Msg 245, Level 16, State 1, Line 8 Conversion failed when converting the nvarchar value 'select count(*) from AdventureWorksDW2012.INFORMATION_SCHEMA.Tables WHERE TABLE_TYPE = 'BASE TABLE' AND Table_name = DimAccount' to data type int.
All source and target date fields are defined as data type "smalldatetime". The "select" executes without error though when used with "insert into" it fails with the error:
Msg 295, Level 16, State 3, Line 25: Conversion failed when converting character string to small date-time data type..I am converting from a character string to smalldatetime since the source and target date columns are "smalldatetime". All other columns for the source and target are nvarchar(255). I assume there is an implicit conversion that I don't understand. In a test, I validated that all dates selected evaluate ISDATE() to 1.
USE [SCIR_DataMart_FromProd_06_20_2014] GO IF OBJECT_ID ('[SCIR_DataMart_FromProd_06_20_2014].[dbo].[IdentifierLookup]', 'U') IS NOT NULL DROP TABLE [SCIR_DataMart_FromProd_06_20_2014].[dbo].[IdentifierLookup]
this is in form VB Private Sub orderidtxbx_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles orderidtxbx.Click sqlconnection = New SqlConnection("Data Source= xxxx;Initial Catalog = xxxx; user ID = sa; Password = xxxxx;") sqlcommand = New SqlCommand("select Customer.LastName, Customer.FirstName from customer where ticket.ticketid ='" & orderidtxbx.Text & "'", sqlconnection)
error msg The multi-part identifier "ticket.ticketid" could not be bound
query in sql 2005,I need to make store procedure.
SELECT Itinerary.FlightID, Itinerary.Class, Itinerary.Quantity, Ticket.Date, Flight.FlightNo, Flight.AirLine, Flight.DepartureDate, Flight.ArrivalDate, Flight.DepartureTime, Flight.ArrivalTime, Flight.Price, Departure.DepartureLocation, Arrival.ArrivalLocation,GST=convert(int,Itinerary. Quantity*0.06*Flight.Price),PST=convert(int,Itiner ary.Quantity*0.07*Flight.Price),TotalPrice=convert (int,(Itinerary.Quantity*0.06*Flight.Price)+(Itine rary.Quantity*0.07*Flight.Price)+Flight.Price) FROM Flight INNER JOIN Itinerary ON Flight.FlightID = Itinerary.FlightID INNER JOIN Ticket ON Itinerary.TicketID = Ticket.TicketID INNER JOIN Departure ON Flight.DepartureLocationID = Departure.DepartureID INNER JOIN Arrival ON Flight.ArrivalLocationID = Arrival.ArrivalID WHERE (Itinerary.ticketid = '@Itinerary.ticketid')
if i change WHERE (Itinerary.ticketid = 1) it will read the data in the table.
I need to refer that itinerary.ticketid into textbox in form that's why i make like this WHERE (Itinerary.ticketid = '@Itinerary.ticketid') but i don't know what is worng with this.
This error Msg 245, Level 16, State 1, Line 2 Conversion failed when converting the varchar value '@Itinerary.ticketid' to data type int(but my ticketid value already integer not varchar).
Hi i keep getting this error when i search based on Team name (dropdownlist) or coach name(textbox). However it works when i make the search based on the region id(dropdownlist) here is my stored procedure;ALTER PROCEDURE [dbo].[stream_FindTeam] -- Add the parameters for the stored procedure here @coachName varchar(100), @TeamName varchar(100),@regionID INT
AS SELECT TeamID, coachName FROM Teams WHERE coachName LIKE @coachName OR TeamName= @TeamNameOR regionID = @regionID; Here is my code;SqlConnection conn = new SqlConnection(ConfigurationManager.ConnectionStrings["streamConnectionString"].ConnectionString); conn.Open();SqlCommand command = new SqlCommand("stream_FindTeam", conn); command.CommandType = CommandType.StoredProcedure;command.Parameters.AddWithValue("@coachName", coachName.Text); command.Parameters.AddWithValue("@TeamName", TeamList.SelectedValue);command.Parameters.AddWithValue("@regionID", Region.SelectedValue);SqlDataReader reader = command.ExecuteReader(CommandBehavior.CloseConnection); DataList1.DataSource = reader; DataList1.DataBind(); conn.Close();
I getting the above error can someone please help me solve it, here is the code: public void InsertHost() { // TODO // - Call stored procedure to write to a log file writeToLog using (SqlConnection cn = new SqlConnection(ConfigurationManager.AppSettings["ConnectionString"])) { SqlCommand cmd = new SqlCommand("writeToLog", cn); cmd.CommandType = CommandType.StoredProcedure; cmd.Parameters.AddWithValue("@pAction", "action"); cmd.Parameters.AddWithValue("@pHostName", "Hostname"); cmd.Parameters.AddWithValue("@pUserNUm", "requestorID"); cn.Open(); cmd.ExecuteNonQuery(); } } Here is the storedprocedure: ALTER PROCEDURE dbo.writeToLog(@pAction varchar(10), @pUserNUm bigint, @pHostName varchar(25))AS INSERT INTO dbo.hostNameLog (action, requestorID, HostName)VALUES (@pAction, @pUserNUm, @pHostName) Here is the table: HostName - varchar, action - varchar, requestorID - bigint I can't seem to find the error.
Hi I have an insert stored procedure with a parameter @eventDate date type date time. I have written a web form that takes the textbox.text value and assigns to the @eventDate parameter using a querystring. Howevr when I run the application I get a SQL Exception error converting data type nvarchar to datetime. I have tried dssqlInsertEvent.InsertParameters.add("EventDate", convert.todatetime(txtEventDate.text)); wbut received another error. Any assistance would be greatly appreciated.