Converting Decimal Hours To Hours And Minutes
May 13, 2008I have a float variable that holds a decimal number of hours.
So 1.5 equals 1 hour 30 minutes.
I need to change this to the format 1:30
Any idea how to do this?
I have a float variable that holds a decimal number of hours.
So 1.5 equals 1 hour 30 minutes.
I need to change this to the format 1:30
Any idea how to do this?
I have a series of times in decimal 15 min slots. The data type is float and the field is the followng:
10
10.25
10.5
10.75
11
and so on
I would like to convert that to the hour and 15 minute slot
10:00:00
10:15:00
10:30:00
10:45:00
11:00:00
I am trying to convert hours and minutes to decimal and arrive at a sum of time taken. The column TotalTimeSpent is the diff in hours/mins between the Started and Ended times.
SELECT DATENAME(weekday, Started) AS Day, C.Category, ClientCode,Description, dbo.FormatDateTime(Started, 'HH:MMS 12') as Started, dbo.FormatDateTime(Ended, 'HH:MMS 12') as Ended, CONVERT(varchar,TimeTaken,108) AS TotalTimeSpentFROM dbo.Journal JLEFT OUTER JOIN dbo.Categories C ON J.CategoryID = C.CategoryIDWHERE--DATENAME(weekday, Started) =@Weekday AND Started >= @StartDate ORDER BY Day, Category, Started
Hi Guys,
I have data in minutes which is integer value ex 14454.I wanto convert it to days,hours,minutes & seconds.
Is there any simple way?
Regards.
Is it possible to convert for the following SQL statement into SSRS Expression:
SELECT
RIGHT('00' + CONVERT(VARCHAR(2), FLOOR(SUM(Hours))), 2)
+ ':' + RIGHT('00' + CONVERT(VARCHAR(2), FLOOR((SUM(Hours) - FLOOR(SUM(Hours))) * 60)), 2) + ':' + RIGHT('00' + CONVERT(VARCHAR(2),
FLOOR((SUM(Hours) - FLOOR(SUM(Hours))) * 60 - FLOOR((SUM(Hours) - FLOOR(SUM(Hours))) * 60)) * 60), 2)
FROM TableTime
For example I need SSRS expression for converting 1.75 hours into 01:45:00.
My table as data as follow,
IF EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[dbo].[table_Data]') AND type in (N'U'))
DROP TABLE [dbo].[table_Data]
GO
/****** Object: Table [dbo].[table_Data] Script Date: 04/21/2015 22:07:49 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
IF NOT EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[dbo].[table_Data]') AND type in (N'U'))
[code].....
I have two field and I need to find the sum I guess of them. One is called the clm_dout (process date) and the other one is clm_rcvd (received Date). These are both date and time fields and it looks like this 2006-03-17 00:00:00.000. I need to create a formula that wiil i guess give me the difference and create it into hour and minutes because I an trying to create a turn around report. this is what I had...
TimeValue({clm_doubt}-{clm_rcvd})
This is not working for me. Can someone give me a suggestion please.
Thanks!
Hi
Can anyone help me convert a number to give the result in hours and minutes? For example 195 as 3:15 or 210 as 3:30. We are trying to create a report showing hours and minutes worked without having to export to Excel.
I've had a look around the net and this seems to be quite a difficult function in SQL Server.
Any guidance much appreciated.
Hi guys,
how to get the Hours and Minutes ago?
I have a column name "DateCreated" which is a DateTime type. I need to get the Hours and Minutes ago
Thank you.
hi,
I want to convert minutes to hours. for example field_minutes=130minutes to 2:10 hours...
select field_minutes from table---> how can I do?
guys - is this a decent query to pull all columns (dateCreate)
that have a timestamp less than five minutes?
i know its simple, but i've never done a date compare with minutes or hours
in sql server
thanks
rik:o
select top 10 * from ptpuritm
where datediff(MINUTE,dateCreate,getdate()) <=5
select top 10 * from ptpuritm
where datediff(MINUTE,dateCreate,current_timestamp) <=5
need to calculate the total hours mintues in sql server and asp.net
View 11 Replies View RelatedHello friends
what is the right datatype to store the hours and minutes part in the database?
i found some info which says we have to convert the duration(hrs and min) into minutes and then store
is it the right approach?
Regards
Sara
Hi There,
I would like to find the sum of a column with a date format of '01:10:10' which is the hours:minutes:seconds from multiple rows.
For instance, "01:50:10" + "01:20:5" = "3:10:15"
Any ideas?
Using SQL 2000
Hi All,
I want to get the date Difference with Day,hours,minutes,seconds of the given 2 dates.(Say the difference of
12/6/2007 7:00:00 AM, 12/8/2007 8:00:00 AM as 2 days 1:00:00)
Is there any inbuilt function in SSRS is available to implement this. Or any other way to do this.Please help me with this .Thanks in advance.
With Thanks
M.Mahendra
Currently my script is using the below mentioned query to find the time difference.
DATEDIFF(HH,DATEADD(SS,hcreacion,fcreacion) ,DATEADD(SS,hcerrar,fcreacion))
If there is 1 hr 30 minutes time difference, I am getting 2 hours as output. But we need 1.30 as output. is there any way to achieve this?
In BIDS, I created a time dimension using the wizard. Unfortunately, the template used by the wizard does not contain Hours, Minutes and Seconds; so, I added them using the designer. Now, when I try to build, deploy and process I get the error: Unable to find matching TimeAttributeType. Cannot anyone explain why this is happening and what can be done about? Is there a template available somewhere that does create time dimensions with time and not just dates?
View 5 Replies View Related
Dear all,
I need to ignore the hours minutes and seconds elements of a datetime field - I've got a way of doing this in my select statement but it seems to be this can't be the most efficient way!
CONVERT(datetime, CONVERT(nchar(10), db.tab.field, 101)) AS date_key
Is there a better way?
I want to display Days Hours Mins Format.
I am Having two columns Like below,
Col1 (in days) col2 (In Hours : Mins)
3days 4:5
In this first have to add Col1 and Col2 (Here one day is equals to 9 hours ) so the addition is 31.5
From this 31.5 I should display 3 Days 4 Hours 30 Mins because 31.5 contains 3 (9 hours) days 4 Hours and .5 is equals to 30 mins.
I have written a function that returns the number of Days, Hours and minutes from a given number of minutes. On testinf the results are close but not quite there. Can anyone see where I have gone wrong or is there an easier way of doing this? Code is as follows:
CREATE FUNCTION dbo.GetTimeBetweenLong
(@StartTime DateTime, @EndTime DateTime, @CurrentDate DateTime)
RETURNS VarChar(50) AS
BEGIN
DECLARE @TotalTime Numeric
DECLARE @Minutes Numeric
DECLARE @Hours Numeric
DECLARE @Days Numeric
DECLARE @MinutesInDays Numeric
IF @EndTime IS NULL
BEGIN
SET @Days = DATEDIFF(Day, @StartTime, @CurrentDate)
SET @Hours = DATEDIFF(Hour, @StartTime, @CurrentDate) - (@Days * 24)
SET @Minutes = DATEDIFF(Minute, @StartTime, @CurrentDate) - ((@Days * 24)*60) - (@Hours * 60)
END
ELSE
BEGIN
SET @Days = DATEDIFF(Day, @StartTime, @EndTime)
SET @Hours = DATEDIFF(Hour, @StartTime, @EndTime) - (@Days * 24)
SET @Minutes = DATEDIFF(Minute, @StartTime, @EndTime) - ((@Days * 24)*60) - (@Hours * 60)
END
IF(@Days <0)
BEGIN
SET @Days = @Days - @Days - @Days
END
IF (@Hours < 0)
BEGIN
SET @Hours = @Hours - @Hours - @Hours
END
IF (@Minutes <0)
BEGIN
SET @Minutes = @Minutes - @Minutes - @Minutes
END
RETURN CONVERT(nVarChar(10),@Days) + ' Days, ' + CONVERT(nVarChar(5), @Hours) + ' Hours, ' + CONVERT(nVarCHar(5), @Minutes) + ' Mins'
END
I need to be able to add minutes to a datetime value, which only cover working hours.
I have a holiday table as below:
Examples: (dd/MM/yyyy hh:mm)
Date..........Description
01/01/2015 New Years Day
26/12/2014 Boxing Day
25/12/2014 Christmas Day
25/08/2014 August Bank Holiday
Our Business hours are 08:00-18:00 Mon-Fri (unless the day is in the holiday table)
Start Date............Minute to Add......Expected outcome
01/09/2014 10:00........30...................01/09/2014 10:30
01/09/2014 17:00........65...................02/09/2014 08:05
29/08/2014 17:00........65...................01/09/2014 08:05
22/08/2014 17:00........65...................26/08/2014 08:05
31/08/2014 02:30........65...................01/08/2014 09:05
01/09/2014 19:00........65...................02/08/2014 09:05
01/09/2014 10:00........3005...............08/09/2014 10:05
22/08/2014 17:00........3005...............01/09/2014 17:05
I have tried to create a function to do this (fn_pp_AddMinutesWithinWorkingHours(@StartDate,@Minutes)) but I am unable to come up with a solution which factors in everything correctly.
Dear All,
I have a problem formatting a field in Reporting Services (minutes to hours).
I have a field called duration which stores time in whole minutes only. I can format this into hours within mssql using the following:
cast(sn.duration/60 as varchar(5)) + ':' + RIGHT('0' + cast(sn.duration%60 as varchar(2)), 2)
But I need to have totals and average columns in my report, which means that the data must come through to RS in the minutes format so I can perform the calculations there.
I have the first part (I think!!):
=string.format("{0:0}",Fields!SalesTime.Value / 60) + ":"
But I cannot get the minutes part working!
Any help would be gratefully received.
Dan
Hello,
I have this expression DATEDIFF(HOUR, startdate,enddate) which only shows the hours. I need to show the hours and minutes too , exp. 9.17. Any way to convert the expression to do this. The startdate and enddate fields are mm/dd/yyy hh:mms. I am using report builder.
Given the two datetimes below, what's the best way to obtain the total duration in hours, minutes and seconds (HH:mm:ss)?
Start Time: 2014-03-02 20:55:00.000
End Time: 2014-03-03 07:00:00.000
Duration = 10:05:00
I found in another forum that if I take the seconds and divide them by 15 then round up and multiply them by 4 I can get this done, but I can't figure out how to work it into my select statement. Anyhelp would be greatly appreciated. dbo.SLPTRANS.TimeSpent is the field I am trying to convert.
SELECT dbo.SLPTRANS.ClientID, SUM(dbo.SLPTRANS.TransValue) AS Expr1, dbo.SLPTRANS.TimeSpent AS Expr2
FROM dbo.SLPTRANS INNER JOIN
dbo.INVOICE ON dbo.SLPTRANS.InvoiceID = dbo.INVOICE.RecordID
GROUP BY dbo.SLPTRANS.ClientID
HAVING (dbo.SLPTRANS.ClientID = 405)
I have data coming from a telephony system that keeps track of when anemployee makes a phone call to conduct a survey and which project numberis being billed for the time the employee spends on that phone call in aMS SQL Server 2000 database (which I don't own).The data is being returned to me in a view (see DDL for w_HR_Call_Logbelow). I link to this view in MS access through ODBC to create alinked table. I have my own view in Access that converts the integernumbers for start and end date to Date/Time and inserts some otherinformation i need.This data is eventually going to be compared with data from someelectronic timesheets for purposes of comparing entered hours vs hoursactually spent on the telephone, and the people that will be viewing thedata need the total time on the telephone as wall as that total brokendown by day/evening and weekend. Getting weekend durations is easyenough (see SQL for qryTelephonyData below), but I was wondering ifanyone knew of efficient set-based methods for doing a day/eveningbreakdown of some duration given a start date and end date (with theday/evening boundary being 17:59:59)? My impression is that to do thiscorrectly (i.e., handle employees working in different time zones,adjusting for DST, and figuring out what the boundary is for switchingfrom evening back to day) will require procedural code (probably inVisual Basic or VBA).However, if there are set-based algorithms that can accomplish it inSQL, I'd like to explore those, as well. Can anyone give any pointers?Thanks.--DDL for view in MS SQL 2000 database:CREATE VIEW dbo.w_HR_Call_LogASSELECT TOP 100 PERCENT dbo.TRCUsers.WinsID, dbo.users.username ASInitials, dbo.billing.startdate, dbo.billing.startdate +dbo.billing.duration AS EndDate,dbo.billing.duration, dbo.projects.name ASPrjName, dbo.w_GetCallTrackProject6ID(dbo.projects.descript ion) AS ProjID6,dbo.w_GetCallTrackProject10ID(dbo.projects.descrip tion) AS ProjID10,dbo.billing.interactionidFROM dbo.projects INNER JOINdbo.projectsphone INNER JOINdbo.users INNER JOINdbo.TRCUsers ON dbo.users.userid =dbo.TRCUsers.UserID INNER JOINdbo.billing ON dbo.users.userid =dbo.billing.userid ON dbo.projectsphone.projectid =dbo.billing.projectid ONdbo.projects.projectid = dbo.projectsphone.projectidWHERE (dbo.billing.userid 0)ORDER BY dbo.billing.startdateI don't have acess to the tables, but the fields in the view comethrough as the following data types:WinsID - varchar(10)Initials - varchar(30)startdate - long integer (seconds since 1970-01-01 00:00:00)enddate - long integer (seconds since 1970-01-01 00:00:00)duration - long integer (enddate - startdate)ProjID10 - varchar(15)interactionid - varchar(255) (the identifier for this phone call)MS Access SQL statement for qryTelephonyData (based on the view,w_HR_Call_Log):SELECT dbo_w_HR_Call_Log.WinsID, dbo_w_HR_Call_Log.ProjID10,FORMAT(CDATE(DATEADD('s',startdate-(5*60*60),'01-01-197000:00:00')),"yyyy-mm-dd") AS HoursDate,CDATE(DATEADD('s',startdate-(5*60*60),'01-01-1970 00:00:00')) ASStartDT,CDATE(DATEADD('s',enddate-(5*60*60),'01-01-1970 00:00:00')) AS EndDT,DatePart('w',[StartDT]) AS StartDTDayOfWeek, Duration,IIf(StartDTDayOfWeek=1 Or StartDTDayOfWeek=7,Duration,0) ASWeekendSeconds,FROM dbo_w_HR_Call_LogWHERE WinsID<>'0'
View 3 Replies View RelatedHi!
I have the difference between two dates in milliseconds. I want to convert this difference to the format hh:mm:ss.mmm, without the date. So, if the difference is bigger then one day, I would like to show it like this, for example: 36:25:14.047
How can I do this?
Thank you!
Hi
I'm getting strange results when converting a number to hours and minutes.
The following section of code....
AbsentMinutes,
CONVERT(varchar(5), DATEADD([minute], [AbsentMinutes], 0), 108) AS AbsentHours,
[Term 1 Minutes],
CONVERT(varchar(5), DATEADD([minute], [Term 1 Minutes], 0), 108) AS Term1Hours,
......is yielding the following results.
AbsentMins 6480 AbsentHours 12:00
Term 1 Mins 21540 Term 1 Hours 23:00
Obviously thats not right but I cant see where.
Can anyone advise please? This has worked for me previously on other data.
Sorry i think i may have posted this in the incorrect forum before - if i have done it again here can someone tell me where i should post this please, thanks:
Hi,
we are having problems with a server Intel RZeon 3ghz, 3gb ram running 2003 service pack 2 with a 70gb drive and and 400 gb drive all with adequate free space. There are 6 hard disks in total and i assume operating at least RAID 5. We have SQL2000 server with a few standard sized databases and a connection to one other server.
A few months ago the back up of SQL server databases started taking 4- 5 hours when before it took 20 minutes. We had actually lost one of our disks in the RAID array and it before this was spotted by our engineers we reindexed the sql databases and defragged both 70gbC: and D: 400gb drives hoping to correct this slow down. Unfortunately the new disk had not been correctly seated and this was why it was taking 4-5 hours. After fixing the disk the backups took 12 minutes again but then started taking 2-3 hours after a few days.
The reindex/defrag did seem to improve the speed of the backups to 12 minutes (from 20 minutes) when the backup did function correctly (also the sql databases' performance improved). However the backups only take 12 minutes after a server reboot - this can last from only 2, up to 5 backups(days) in a row before a slow down to 2-3 hours and again only a reboot will sort out this problem.
NB this intermittent slowdown only occurred after the disk failure.
We have tried monitoring SQL server and can find no CPU/RAM intensive clashes or long running jobs interferring with the back up. Does anyone know what might be going on here? and if there are any server monitoring tools that may help us discover what is causing this problem ?
thanks for your help
best regards
kevin
Hi all.If I've got a query which has a field with seconds in it... how will I usethe Convert function to get my field converted to the format: HH:MM:SS ?The field with the seconds in is called: "Diff"Thanks alotRudi
View 2 Replies View RelatedSELECT
CONVERT(VARCHAR(10),attnc_chkin_dt,101) as INDATE,
CONVERT(VARCHAR(10),attnc_chkin_dt,108) as TimePart
FROM pmt_attendance
o/p
indate 04/18/2015
time part :17:45:00
I need to convert this 17:45:00 to 12 hours date format...
We have a few Servers that have space issues that need full DB Backups every day. As a result, we have to carefully watch how many DB Backup files we keep on the Server. On the Maintenance Plan, if I set the 'Delete files older than:' to '1' 'Day', will this delete anything over 24 hours old? What I have noticed, is that it tends to delete on Tuesday anything that was created on Sunday, but not Monday. Therefore, I am assuming that instead of '1 Day' being 24 hours, it is anything less than 47 hours and 59 minutes...
Is my assumption correct or do I need to look at something else. Thanks!
Billy
SELECT sysjobs.name, sysjobservers.last_run_outcome, CONVERT(varchar(8), sysjobservers.last_run_date, 112) AS LastRunDate, CONVERT(varchar(8),
sysjobservers.last_run_time, 8) AS LastRunTime, GETDATE() AS CurrentDateTime
FROM sysjobs LEFT OUTER JOIN
sysjobservers ON sysjobs.job_id = sysjobservers.job_id
WHERE (sysjobservers.last_run_outcome = 0) AND (CONVERT(varchar(8), sysjobservers.last_run_date, 112) >= DATEADD(day, - 1, GETDATE()))
I am wanting a similar solution, I need to convert an "int" to a time format, when I use this where ">= DATEADD(minute, - 720, GETDATE())" for the last_run_time I get this error:
Syntax error converting datetime from character string.