Correct Format For Set Arithabort On

Jan 18, 2005

I am calling a stored procedure with the following syntax:





Dim MyCommand1 As New SqlCommand("addprospcus", MyConnection)


MyCommand1.CommandText = "set arithabort on"


MyCommand1.CommandType = CommandType.StoredProcedure


MyCommand1.Parameters.Add(New SqlParameter("@Namecust", SqlDbType.NVarChar, 60))


MyCommand1.Parameters("@namecust").Value = txtProspName.Text.ToString


MyCommand1.Parameters.Add(New SqlParameter("@codeterr", SqlDbType.NVarChar, 6))


MyCommand1.Parameters("@codeterr").Value = Trim(TerritoryList1.SelectedItem.Value.ToString)


MyConnection.Open()


MyCommand1.ExecuteNonQuery()


MyConnection.Close()








This is incorrect, but I can not find the correct syntax for calling my stored procedure but first setting "arithabort on".





Thanks in advance for your assistance.

View 4 Replies


ADVERTISEMENT

Getting Date In Correct Format

Jan 15, 2006

Hi,
How does one generate a date string from a DateTime object which is formatted in the correct way for the database?
I want to avoid the possibility of getting the month and the day the wrong way around.
Cheers, WT.

View 1 Replies View Related

Input String Was Not In A Correct Format.

Aug 8, 2006

I get this error when executing a stored procedure from my code. I suppose something's going wrong with data types, but I cannot see what. If anyone has a sharper eye and can see what it is, please let me know. Thanks in advance!Here is a code excerpt:         int category = Convert.ToInt32(ddlCategories.SelectedValue);        int museum = Convert.ToInt32(ddlMuseums.SelectedValue);        int collection = Convert.ToInt32(ddlCollections.SelectedValue);        string binomen = txtScientName.Text;        string locality = txtLocality.Text;        command.CommandType = CommandType.StoredProcedure;        command.Parameters.Add(new SqlParameter("@taxparent", category));        command.Parameters.Add(new SqlParameter("@museum", museum));        command.Parameters.Add(new SqlParameter("@collection", collection));        command.Parameters.Add(new SqlParameter("@binomen", binomen));        command.Parameters.Add(new SqlParameter("@locality", locality));And the stored procedure code: ALTER PROCEDURE [petrander].[DynamicQuery]     @taxparent int = NULL,     @museum int = NULL,     @collection int = NULL,     @binomen Nvarchar(254) = NULL,     @locality Nvarchar(254) = NULLAS    SELECT *    FROM QueryView    WHERE         InstitutionCode = COALESCE(@museum, InstitutionCode) AND        CollectionCode = COALESCE(@collection, CollectionCode) AND        ScientificName LIKE '%' + @binomen + '%' AND         Locality LIKE '%' + @locality + '%' AND         ParentID1 = COALESCE(@taxparent, ParentID3) OR        ParentID2 = COALESCE(@taxparent, ParentID2) OR        ParentID3 = COALESCE(@taxparent, ParentID3) OR        ParentID4 = COALESCE(@taxparent, ParentID4) OR        ParentID5 = COALESCE(@taxparent, ParentID5) OR        ParentID6 = COALESCE(@taxparent, ParentID6) OR        ParentID7 = COALESCE(@taxparent, ParentID7) OR        ParentID8 = COALESCE(@taxparent, ParentID8)

View 1 Replies View Related

Input String Not In Correct Format

Dec 28, 2006

HiI have just started using Visual Web Developer to produce
asp.net page. I am having a problem when inserting a new record into a
particular table, within the insertion form I have included a drop down
list which gathers informaton from another table. When I view the page
through the browser when I click the insert link I get an error message
on stating 'Input string not in correct format' . The code for the page is below. Does anyone know what
the problem could be? Thanks <%@ Page Language="VB" MasterPageFile="~/MasterPage.master" AutoEventWireup="false" CodeFile="Default.aspx.vb" Inherits="PhotoAdmin_Default" title="Untitled Page" %><asp:Content ID="Content1" ContentPlaceHolderID="ContentPlaceHolder1" Runat="Server">    <asp:Label ID="UserIdValue" runat="server"></asp:Label><br />    <asp:SqlDataSource ID="pictureDataSource" runat="server" ConnectionString="<%$ ConnectionStrings:ConnectionString %>"        DeleteCommand="DELETE FROM [Pictures] WHERE [PictureID] = @PictureID" InsertCommand="INSERT INTO [Pictures] ([UserId], [CategoryID], [Title], [Description], [UploadedOn]) VALUES (@UserId, @CategoryID, @Title, @Description, @UploadedOn)"        SelectCommand="SELECT * FROM [Pictures] WHERE ([UserId] = @UserId) ORDER BY [UploadedOn] DESC"        UpdateCommand="UPDATE [Pictures] SET [UserId] = @UserId, [CategoryID] = @CategoryID, [Title] = @Title, [Description] = @Description, [UploadedOn] = @UploadedOn WHERE [PictureID] = @PictureID">        <DeleteParameters>            <asp:Parameter Name="PictureID" Type="Int32" />        </DeleteParameters>        <UpdateParameters>            <asp:Parameter Name="UserId" />            <asp:Parameter Name="CategoryID" Type="Int32" />            <asp:Parameter Name="Title" Type="String" />            <asp:Parameter Name="Description" Type="String" />            <asp:Parameter Name="UploadedOn" Type="DateTime" />            <asp:Parameter Name="PictureID" Type="Int32" />        </UpdateParameters>        <SelectParameters>            <asp:ControlParameter ControlID="UserIdValue" Name="UserId" PropertyName="Text" />        </SelectParameters>        <InsertParameters>            <asp:Parameter Name="UserId" />            <asp:Parameter Name="CategoryID" Type="Int32" />            <asp:Parameter Name="Title" Type="String" />            <asp:Parameter Name="Description" Type="String" />            <asp:Parameter Name="UploadedOn" Type="DateTime" />        </InsertParameters>    </asp:SqlDataSource>    <asp:SqlDataSource ID="categoriesDataSource" runat="server" ConnectionString="<%$ ConnectionStrings:ConnectionString %>"        SelectCommand="SELECT [CategoryID], [Name] FROM [Categories] ORDER BY [Name]">    </asp:SqlDataSource>    <asp:SqlDataSource ID="maxPictureIDDataSource" runat="server" ConnectionString="<%$ ConnectionStrings:ConnectionString %>"        SelectCommand="SELECT MAX (PictureID)&#13;&#10;FROM Pictures&#13;&#10;WHERE UserId = @UserId">        <SelectParameters>            <asp:ControlParameter ControlID="UserIdValue" Name="UserId" PropertyName="Text" />        </SelectParameters>    </asp:SqlDataSource>    <br />    <asp:DetailsView ID="dvPictureInsert" runat="server" AutoGenerateRows="False" DataKeyNames="PictureID"        DataSourceID="pictureDataSource" DefaultMode="Insert" Height="50px" Width="125px">        <Fields>            <asp:BoundField DataField="PictureID" HeaderText="PictureID" InsertVisible="False"                ReadOnly="True" SortExpression="PictureID" />            <asp:TemplateField HeaderText="CategoryID" SortExpression="CategoryID">                <EditItemTemplate>                    <asp:TextBox ID="TextBox1" runat="server" Text='<%# Bind("CategoryID") %>'></asp:TextBox>                </EditItemTemplate>                <InsertItemTemplate>                    <asp:DropDownList ID="DropDownList1" runat="server" DataSourceID="categoriesDataSource"                        DataTextField="Name" DataValueField="CategoryID" SelectedValue='<%# Bind("CategoryID") %>' AppendDataBoundItems="True">                        <asp:ListItem>--None--</asp:ListItem>                    </asp:DropDownList>                </InsertItemTemplate>                <ItemTemplate>                    <asp:Label ID="Label1" runat="server" Text='<%# Bind("CategoryID") %>'></asp:Label>                </ItemTemplate>            </asp:TemplateField>            <asp:TemplateField HeaderText="Title" SortExpression="Title">                <EditItemTemplate>                    <asp:TextBox ID="TextBox2" runat="server" Text='<%# Bind("Title") %>'></asp:TextBox>                </EditItemTemplate>                <InsertItemTemplate>                    <asp:TextBox ID="TextBox1" runat="server" Text='<%# Bind("Title") %>'></asp:TextBox><br />                    <asp:RequiredFieldValidator ID="RequiredFieldValidator1" runat="server" ControlToValidate="TextBox1"                        Display="Dynamic" ErrorMessage="RequiredFieldValidator" ValidationGroup="PictureAdd"></asp:RequiredFieldValidator>                </InsertItemTemplate>                <ItemTemplate>                    <asp:Label ID="Label2" runat="server" Text='<%# Bind("Title") %>'></asp:Label>                </ItemTemplate>            </asp:TemplateField>            <asp:TemplateField HeaderText="Description" SortExpression="Description">                <EditItemTemplate>                    <asp:TextBox ID="TextBox3" runat="server" Text='<%# Bind("Description") %>'></asp:TextBox>                </EditItemTemplate>                <InsertItemTemplate>                    <asp:TextBox ID="TextBox2" runat="server" Text='<%# Bind("Description") %>'></asp:TextBox><br />                    <asp:RequiredFieldValidator ID="RequiredFieldValidator2" runat="server" ControlToValidate="TextBox2"                        Display="Dynamic" ErrorMessage="RequiredFieldValidator" ValidationGroup="PictureAdd"></asp:RequiredFieldValidator>                </InsertItemTemplate>                <ItemTemplate>                    <asp:Label ID="Label3" runat="server" Text='<%# Bind("Description") %>'></asp:Label>                </ItemTemplate>            </asp:TemplateField>            <asp:CommandField ShowInsertButton="True" />        </Fields>    </asp:DetailsView>    <br />    <br /></asp:Content> 

View 3 Replies View Related

Input String Was Not In A Correct Format.

May 21, 2007

I am using SQL Server Express and Visual Web Developer Express with VB as my preferred language.
I am trying to specify an InsertParameter with a querystring parameter of a SQLDataSource Control.
My Code is:
<InsertParameters>
<asp:Parameter Name="ProjectID" Type="Int32" DefaultValue="Convert.ToInt32(Label1.Text)" />
<asp:Parameter Name="Name" Type="String" />
<asp:Parameter Name="Description" Type="String" />
<asp:Parameter Name="Size" Type="Int32" />
</InsertParameters>
</asp:SqlDataSource>
I get the error message above and the detail is:
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.FormatException: Input string was not in a correct format.Source Error:




An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:




[FormatException: Input string was not in a correct format.]
System.Number.StringToNumber(String str, NumberStyles options, NumberBuffer& number, NumberFormatInfo info, Boolean parseDecimal) +2753299
System.Number.ParseInt32(String s, NumberStyles style, NumberFormatInfo info) +102
System.String.System.IConvertible.ToInt32(IFormatProvider provider) +43
System.Convert.ChangeType(Object value, TypeCode typeCode, IFormatProvider provider) +293
System.Web.UI.WebControls.Parameter.GetValue(Object value, String defaultValue, TypeCode type, Boolean convertEmptyStringToNull, Boolean ignoreNullableTypeChanges) +248
System.Web.UI.WebControls.Parameter.get_ParameterValue() +67
System.Web.UI.WebControls.ParameterCollection.GetValues(HttpContext context, Control control) +255
System.Web.UI.WebControls.SqlDataSourceView.InitializeParameters(DbCommand command, ParameterCollection parameters, IDictionary exclusionList) +265
System.Web.UI.WebControls.SqlDataSourceView.ExecuteInsert(IDictionary values) +214
System.Web.UI.DataSourceView.Insert(IDictionary values, DataSourceViewOperationCallback callback) +68
System.Web.UI.WebControls.FormView.HandleInsert(String commandArg, Boolean causesValidation) +389
System.Web.UI.WebControls.FormView.HandleEvent(EventArgs e, Boolean causesValidation, String validationGroup) +609
System.Web.UI.WebControls.FormView.OnBubbleEvent(Object source, EventArgs e) +88
System.Web.UI.Control.RaiseBubbleEvent(Object source, EventArgs args) +35
System.Web.UI.WebControls.FormViewRow.OnBubbleEvent(Object source, EventArgs e) +109
System.Web.UI.Control.RaiseBubbleEvent(Object source, EventArgs args) +35
System.Web.UI.WebControls.LinkButton.OnCommand(CommandEventArgs e) +86
System.Web.UI.WebControls.LinkButton.RaisePostBackEvent(String eventArgument) +155
System.Web.UI.WebControls.LinkButton.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11
System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +172
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +4921

I have verified that Label1.Text has a value that looks like an integer. What is causing the problem? Is there a better way of creating a new record in the child table and making one of the fields match the primary key of the parent table?
Thanks.

View 7 Replies View Related

Input String Was Not In A Correct Format.

Nov 15, 2007

Hi!I get this message: System.FormatException: Input string was not in a correct format.
when i try to execute this code:
 TextBox tbox = new TextBox();
string Date;
string Title;
string Text;
string sUserName = HttpContext.Current.User.Identity.Name;
MembershipUser User = Membership.GetUser(sUserName);
string UserID = User.ProviderUserKey.ToString();
int NewsID = Convert.ToInt32(ViewEditNews.DataKeys[e.Item.ItemIndex]);

tbox = (TextBox)e.Item.FindControl("EditNewsDateTxt");
Date = tbox.Text;

tbox = (TextBox)e.Item.FindControl("EditNewsTitleTxt");
Title = tbox.Text;

tbox = (TextBox)e.Item.FindControl("EditNewsTextTxt");
Text = tbox.Text;

GetNews.UpdateCommandType = SqlDataSourceCommandType.Text;
GetNews.UpdateCommand = "UPDATE ovarvet.News SET HeadText=@Title, Text=@Text, Date=@Date, UserID=@UserID WHERE NewsID=@NewsID";
GetNews.UpdateParameters.Add("Title",TypeCode.String, Title);
GetNews.UpdateParameters.Add("Text", TypeCode.String, Text);
GetNews.UpdateParameters.Add("Date", TypeCode.String, Date);
GetNews.UpdateParameters.Add("UserID", TypeCode.UInt32, UserID);
GetNews.UpdateParameters.Add("NewsID", TypeCode.Int32, NewsID.ToString());

GetNews.Update();


ViewEditNews.DataBind();
ViewEditNews.EditItemIndex = -1;
ViewEditNews.DataBind(); Anyone who knows the problem with this code?

View 7 Replies View Related

Input String Was Not In A Correct Format.

Mar 20, 2008

Hello, this is my code and the problem is "Input string was not in a correct format."
Dim connection As SqlConnection = New SqlConnection(ConfigurationSettings.AppSettings("cnn"))
 
Dim percentage, jaar, kpi3, maand1 As IntegerDim cmd As SqlCommand = New SqlCommand
 
connection.Open()
 percentage = CInt(TextBox1.Text)
jaar = CInt(TextBox2.Text)kpi3 = CInt(Kpi.SelectedValue)maand1 = CInt(Maand.SelectedValue)
 
 
 
cmd.CommandText = "INSERT INTO tblOverzicht(kpiID, maandID, jaar, percentage)values('" + CInt(kpi3) + "', '" + CInt(maand1) + "', '" + CInt(jaar) + "', '" + CInt(percentage) + "')"
cmd.ExecuteNonQuery()

 connection.Close()
 
End Sub

View 10 Replies View Related

Input String Was Not In A Correct Format.

Mar 28, 2008

Hi i keep getting an error when i search based on the coachname textbox or the team name dropdown list, when I search based on the region dropdown list it works fine. The error i get is "Input string was not in a correct format"
Here is my code;
 protected void Button1_Click(object sender, EventArgs e)
{

if (this.IsValid)
{

lblResults.Text = "Here are the search results!";
}

SqlConnection conn = new SqlConnection(ConfigurationManager.ConnectionStrings["streamConnectionString"].ConnectionString);
conn.Open();

SqlCommand command = new SqlCommand("stream_FindTeam", conn);
command.CommandType = CommandType.StoredProcedure;

command.Parameters.Add("@coachName", SqlDbType.VarChar, 250).Value = coachName.Text;command.Parameters.Add("@TeamName", SqlDbType.VarChar, 250).Value = TeamList.SelectedValue;
{

if ((string.IsNullOrEmpty(Region.SelectedValue)))
{

command.Parameters.Add("@regionID", DBNull.Value);
}

else

{

command.Parameters.Add("@regionID", SqlDbType.Int ).Value = Region.SelectedValue;
}

}

SqlDataReader reader = command.ExecuteReader();
DataList1.DataSource = reader;

DataList1.DataBind();

conn.Close();

}

protected void DataList1_SelectedIndexChanged(object sender, EventArgs e)
{

}

protected void CustomValidator1_ServerValidate(object source, ServerValidateEventArgs args)
{

args.IsValid = !(String.IsNullOrEmpty(coachName.Text) && TeamList.SelectedIndex == 0 && Region.SelectedIndex == 0);
}

}


 And my stored procedure is ALTER PROCEDURE [dbo].[stream_FindTeam]
@coachName varchar(100),
@TeamName varchar(100),
@regionID INT
AS
SELECT TeamID, coachName FROM Teams
WHERE coachName LIKE COALESCE(@coachName, coachName)
AND TeamName = COALESCE(@TeamName, TeamName)
AND regionID = COALESCE(@regionID, regionID);
 

View 2 Replies View Related

Input String Was Not In A Correct Format.

Mar 30, 2008

 
Hi, im using vb,net sql 2005.  I keep getting this error when inserting on one of my forms, normally i debug and have no probs solving this sort of thing but the error below isnt giving me anything to work on, could someone point me in the right direction.  Any help would be appreciatedThanks



[FormatException: Input string was not in a correct format.]
System.Number.StringToNumber(String str, NumberStyles options, NumberBuffer& number, NumberFormatInfo info, Boolean parseDecimal) +2752899
System.Number.ParseInt32(String s, NumberStyles style, NumberFormatInfo info) +102
System.String.System.IConvertible.ToInt32(IFormatProvider provider) +43
System.Convert.ChangeType(Object value, TypeCode typeCode, IFormatProvider provider) +293
System.Web.UI.WebControls.Parameter.GetValue(Object value, String defaultValue, TypeCode type, Boolean convertEmptyStringToNull, Boolean ignoreNullableTypeChanges) +248
System.Web.UI.WebControls.ObjectDataSourceView.MergeDictionaries(ParameterCollection reference, IDictionary source, IDictionary destination, String parameterNameFormatString) +445
System.Web.UI.WebControls.ObjectDataSourceView.ExecuteInsert(IDictionary values) +620
System.Web.UI.DataSourceView.Insert(IDictionary values, DataSourceViewOperationCallback callback) +68
System.Web.UI.WebControls.DetailsView.HandleInsert(String commandArg, Boolean causesValidation) +392
System.Web.UI.WebControls.DetailsView.HandleEvent(EventArgs e, Boolean causesValidation, String validationGroup) +609
System.Web.UI.WebControls.DetailsView.OnBubbleEvent(Object source, EventArgs e) +88
System.Web.UI.Control.RaiseBubbleEvent(Object source, EventArgs args) +35
System.Web.UI.WebControls.DetailsViewRow.OnBubbleEvent(Object source, EventArgs e) +109
System.Web.UI.Control.RaiseBubbleEvent(Object source, EventArgs args) +35
System.Web.UI.WebControls.LinkButton.OnCommand(CommandEventArgs e) +86
System.Web.UI.WebControls.LinkButton.RaisePostBackEvent(String eventArgument) +155
System.Web.UI.WebControls.LinkButton.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11
System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +172
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +4925

 

View 1 Replies View Related

Input String Was Not In A Correct Format.

Apr 13, 2008

 Hi,I am trying to Update using SqlDataSource.I get the error: Input string was not in a correct format. Does anyone know what would cause this?Thanks,Jon 

View 1 Replies View Related

Input String Was Not In A Correct Format.

Jun 11, 2008

 Hi i hope someone can help with my problem, im quite nb to asp.net. while im trying to update or insert the record i encountered the this error  Input string was not in a correct format. I only encounter this only in one field (value_char9)   pls note this is varchar2 in the table. the problem encounter when i try to input value greater than sign e.g. >1000, but if there no symbol updating and insertion work fine.  If PageMode = "Add" ThencmdSql = New OleDbCommand("Select id From r_feclas Where fec_key='" & strFType & "' And fec_type='PNTTYP' And code_status<>'I'", sqlConn)intKPTId = cmdSql.ExecuteScalar()'cmdSql = New OleDbCommand("Select mond.Nextval From dual", sqlConn) : intId = cmdSql.ExecuteScalar()Dim cmdSql2 As OleDbCommand = New OleDbCommand()Dim sqlTrans As OleDbTransaction = sqlConn.BeginTransaction()cmdSql2.Connection = sqlConn : cmdSql2.Transaction = sqlTransTry 'cmdSql2.CommandText = "Select last_doc_num From r_docnum Where doc_type='MOND' FOR UPDATE" 'intId = cmdSql2.ExecuteScalar() + 1 'cmdSql2.CommandText = "Update r_docnum Set last_doc_num=" & intId & " Where doc_type='MOND'" cmdSql2.CommandText = "Select Mond.NextVal From dual" intId = cmdSql2.ExecuteScalar()sqlTrans.Commit()Catch ex As ExceptionsqlTrans.Rollback()lblErrorMsg.Text = ex.Message : lblErrorMsg.Visible = TrueReturnEnd TrystrSql = "Insert Into r_mondat (read_date, value_num1, value_char1, value_char2, value_char3, value_char4, value_char5, " & _ "value_char6, value_char7, value_char8, value_char9, value_char10, value_char11, value_char12, " & _ "value_char13, value_char14, value_char15, value_char16, value_char17, value_char18, value_char19, Id, " & _ "last_updt, updt_user, created_on, created_by, tag, position, key_pnt, tag_fe_id, positn_fe_id, keypnt_fe_id, " & _ "key_pnt_type_grp, key_pnt_type, form_type, key_pnt_type_id) " & _ "Values (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,SYSDATE,'" & Cache(Session.SessionID & "_UserId") & "',SYSDATE,'" & Cache(Session.SessionID & "_UserId") & "'," & _ "'" & strT & "','" & strP & "','" & strK & "'," & intT & "," & intP & "," & intK & ",'" & strFType & "','" & strFType & "','" & strFType & "'," & intKPTId & ")"ElseintId = dgrdData.DataKeys(0) strSql = "Update r_mondat Set read_date=?, value_num1=?, value_char1=?, value_char2=?, value_char3=?, value_char4=?, value_char5=?, " & _ "value_char6=?, value_char7=?, value_char8=?, value_char9=?, value_char10=?, value_char11=?, value_char12=?, " & _ "value_char13=?, value_char14=?, value_char15=?, value_char16=?, value_char17=?, value_char18=?, value_char19=?, " & _ "last_updt=sysdate " & "Where id=?" End If cmdSql = New OleDbCommand(strSql, sqlConn) cmdSql.Parameters.Add("@R1", OleDbType.Date).Value = dtDate cmdSql.Parameters.Add("@N1", OleDbType.Numeric).Value = GetValueFromDataGrid("N1") For i = 1 To 19 cmdSql.Parameters.Add("@C" & i, OleDbType.VarChar, 20).Value() = GetValueFromDataGrid("C" & i) Next cmdSql.Parameters.Add("@Id", OleDbType.Numeric).Value = intId Try cmdSql.ExecuteNonQuery() lblErrorMsg.Text = "Data Updated Successfully." dgrdData.EditItemIndex = -1 If PageMode = "Add" Then RetrieveLeakData(intId) Else RetrieveLeakData() Catch ex As Exception lblErrorMsg.Text = ex.Message Finally sqlConn.Close() End Try lblErrorMsg.Visible = True Trace.Write("lnkUpdate_Click End")  

View 6 Replies View Related

Input String Was Not In A Correct Format.

Sep 24, 2004

************* Edited by moderator Adec ***************
Inserted missing < code></ code> tags. Always include such
tags when including code in your postings. Don't force the
moderators to do this for you. Many readers disregard
postings without the code tags.
**************************************************

I've been workin on this a while and hope I just missed something simple. I have a login page that looks in the db for the rec_id that has the correct un/pw combo. Simple u'd think but I keep getting that error. Any help is greatly appreciated.

Private Sub CheckUser(ByVal CurrentSQLCommand As SqlCommand)
'Declare vars for user and pass. Not needed now but will be used for input checking later
Dim strUN As String = txtUN.Text
Dim strPW As String = txtPW.Text

CurrentSQLCommand.Parameters.Item("@un").Value = strUN
CurrentSQLCommand.Parameters.Item("@pw").Value = strPW

SqlConnection1.Open()
Dim datareader As SqlDataReader = CurrentSQLCommand.ExecuteReader
While datareader.Read
If datareader.HasRows Then
txtID.Text = datareader(0)
If txtR.Text = 3 Then
Response.Redirect("hcprov.aspx?id=" & txtID.Text)
ElseIf txtR.Text = 2 Then
Response.Redirect("hcprof.aspx?id=" & txtID.Text)
ElseIf txtR.Text = 1 Then
Response.Redirect("hca.aspx?id=" & txtID.Text)
End If
'CreateTicket()
ElseIf Not datareader.HasRows Then
txtUN.Text = ""
txtPW.Text = ""
lblError.Text = "This User/Pass combo is not valid please try again!"
lblError.Visible = True
End If
datareader.Close()
SqlConnection1.Close()
End While
End Sub

cmdCheckProfUser

SELECT REC_ID
FROM dbo.HCPROFESSIONAL
WHERE (UN = @un) AND (PW = @pw)

View 7 Replies View Related

Input String Was Not In A Correct Format

Nov 5, 2005

I am trying to do an insert into a SQL server table but I am getting an "input string was not in correct format" error.  Does this error always refer to SQL string problem?  I put in a breakpoint and looked at the SQL and it looks good but until I figure this out I will be tracing through the code.  Any input greatly appreciated.  MyCmd.CommandText = sSQL     MyCmd.ExecuteNonQuery()  'Line where I get the errorThanks,Joe

View 2 Replies View Related

Input String Was Not In A Correct Format.

Apr 3, 2006

Hi,
I am trying to insert a record into 2 tables with master-child relationship. When i execute the code i get this error on the statement " UserID = Convert.ToInt32(cmdExp.ExecuteScalar())"
Can anyone help?
CODE AS FOLLOWS
Dim con As SqlConnection
Dim trans As SqlTransaction = Nothing
Dim cmdExp As SqlCommand
Try
con = New SqlConnection(ConfigurationManager.ConnectionStrings("ConnectionString").ConnectionString)
con.Open()
trans = con.BeginTransaction
'CREATE THE COMMAND
cmdExp = New SqlCommand()
cmdExp.Connection = con
cmdExp.Transaction = trans
'Create the appropriate SQL statement
cmdExp.CommandText = "INSERT INTO USER_DETAILS (HOSPITAL_ID,FIRST_NAME,LAST_NAME,ADDRESS,CITY,STATE,ZIP,PHONE,EMAIL,REG_CODE,STATUS,REG_DATE,UPDATE_DATE) VALUES (@PARHOSPITALID,@PARFIRSTNAME,@PARLASTNAME,@PARADDRESS,@PARCITY,@PARSTATE,@PARZIP,@PARPHONE,@PAREMAIL,@PARREGCODE,@PARSTATUS,@PARREGDATE,@PARUPDATEDATE)"
'Add the parameters
cmdExp.Parameters.Add(New SqlParameter("@PARHOSPITALID", SqlDbType.Int, 4))
cmdExp.Parameters("@PARHOSPITALID").Value = var_hospitalid
cmdExp.Parameters.Add(New SqlParameter("@PARFIRSTNAME", SqlDbType.VarChar, 20))
cmdExp.Parameters("@PARFIRSTNAME").Value = var_firstname
cmdExp.Parameters.Add(New SqlParameter("@PARLASTNAME", SqlDbType.VarChar, 20))
cmdExp.Parameters("@PARLASTNAME").Value = var_lastname
cmdExp.Parameters.Add(New SqlParameter("@PARADDRESS", SqlDbType.VarChar, 20))
cmdExp.Parameters("@PARADDRESS").Value = var_address
cmdExp.Parameters.Add(New SqlParameter("@PARCITY", SqlDbType.VarChar, 20))
cmdExp.Parameters("@PARCITY").Value = var_city
cmdExp.Parameters.Add(New SqlParameter("@PARSTATE", SqlDbType.VarChar, 20))
cmdExp.Parameters("@PARSTATE").Value = var_state
cmdExp.Parameters.Add(New SqlParameter("@PARZIP", SqlDbType.VarChar, 20))
cmdExp.Parameters("@PARZIP").Value = var_zip
cmdExp.Parameters.Add(New SqlParameter("@PARPHONE", SqlDbType.VarChar, 20))
cmdExp.Parameters("@PARPHONE").Value = var_phone
cmdExp.Parameters.Add(New SqlParameter("@PAREMAIL", SqlDbType.VarChar, 20))
cmdExp.Parameters("@PAREMAIL").Value = var_email
cmdExp.Parameters.Add(New SqlParameter("@PARREGCODE", SqlDbType.VarChar, 20))
cmdExp.Parameters("@PARREGCODE").Value = var_regcode
cmdExp.Parameters.Add(New SqlParameter("@PARSTATUS", SqlDbType.VarChar, 20))
cmdExp.Parameters("@PARSTATUS").Value = var_status
cmdExp.Parameters.Add(New SqlParameter("@PARREGDATE", SqlDbType.DateTime, 8))
cmdExp.Parameters("@PARREGDATE").Value = DateTime.Now()
cmdExp.Parameters.Add(New SqlParameter("@PARUPDATEDATE", SqlDbType.DateTime, 8))
cmdExp.Parameters("@PARUPDATEDATE").Value = DateTime.Now()
Dim UserID As Integer
UserID = Convert.ToInt32(cmdExp.ExecuteScalar())
cmdExp.CommandText = "UPDATE WEBCAM SET USER_ID= @PARUSERID,STATUS =@PARWEBCAMSTATUS WHERE WEBCAM_ID='" & var_webcamid & "'"
cmdExp.Parameters.Add(New SqlParameter("@PARUSERID", SqlDbType.BigInt, 8))
cmdExp.Parameters("@PARUSERID").Value = UserID
cmdExp.Parameters.Add(New SqlParameter("@PARWEBCAMSTATUS", SqlDbType.VarChar, 20))
cmdExp.Parameters("@PARWEBCAMSTATUS").Value = "INUSE"
cmdExp.ExecuteNonQuery()
trans.Commit()

View 4 Replies View Related

Input String Was Not In A Correct Format

Jul 20, 2005

im using asp.net, C# to enter data into a table in sqlserver...however im getting this error:Input string was not in a correct format.Description: An unhandled exception occurred during the execution ofthe current web request. Please review the stack trace for moreinformation about the error and where it originated in the code.Exception Details: System.FormatException: Input string was not in acorrect format.Source Error:Line 120:cmd.Parameters.Add("@commission",SqlDbType.Money);Line 121:cmd.Parameters["@commission"].Direction=ParameterDirection.Input;Line 122:cmd.Parameters["@commission"].Value =Convert.ToDouble(txtinvoice.Text);Line 123:cmd.Parameters.Add("@pricesold",SqlDbType.Money);Line 124:cmd.Parameters["@pricesold"].Direction=ParameterDirectionSimilar error messages appear when I leave text fields blank that aregoing to be inserted into fields in the table of datatype money,datetime or int...however when i execute this in query analyzer it works and inputs nullvalues for those fields:declare @empid varchar(20), @inventoryid int, @clientid int,@commission money,@pricesold money, @datesold datetime, @invoiceidint, @shippingcost money, @terms varchar(50), @details varchar(50),@clienttype smallint, @checker int, @errordesc varchar(100)set @empid = 'admin'set @inventoryid = 14set @clientid= 2set @clienttype = 0set @commission = nullexec STP_updateconsignment @empid, @inventoryid, @clientid,@commission,@pricesold, @datesold, @invoiceid, @shippingcost, @terms,@details, @clienttype, @checker output, @errordesc outputIf Im in enterprise manager and try to enter a blank value into one ofthose fields I get: The value you entered is not consistent with thedata type or length of the column...so im wondering if the C# page issending my stored procedure a blank value instead of a Null andcausing this error?any advice would be nice..thanks-Jim

View 2 Replies View Related

Input String Was Not In A Correct Format?

Aug 24, 2007





Code SnippetSQL: select max(id) from t1
Input string was not in a correct format.
at System.Number.StringToNumber(String str, NumberStyles options, NumberBuffer& number, NumberFormatInfo info, Boolean parseDecimal)
at System.Number.ParseInt64(String value, NumberStyles options, NumberFormatInfo numfmt)
at System.Data.Odbc.OdbcDataReader.internalGetInt64(Int32 i)
at System.Data.Odbc.OdbcDataReader.GetValue(Int32 i, TypeMap typemap)
at System.Data.Odbc.OdbcDataReader.GetValue(Int32 i)
at System.Data.Odbc.OdbcCommand.ExecuteScalar()





really strange error

this is the table t1
name varchar
id bigint

select name from t1 works.
select id from t1 gave me the same error as above too.

Is it because of its compatible with odbc connection for SQL Server 2005?


what is causing the problem?


Further updates!!
select id from t1 works if data type is int instead of bigint !!!
is this a problem with the SQL Server driver?

I'm connecting to the database via ODBC DSN by the way.
OS is Windows Server 2003.


Thanks,
Max

View 1 Replies View Related

Input String Was Not In A Correct Format When Trying To Searcg

Mar 4, 2007

hi
i have a database with some data in it and iam using full-text-search to search through my data and the search query works fine in sql server manamgnet studio. so my problem is in my web application, i have a textbox where i enter e.g car  and click the search button, the button executes the search query but i recive an error "Input string was not in a correct format".  here is the code that the button executes:
Protected Sub searchButton_Click(ByVal sender As Object, ByVal e As System.EventArgs)
searchSqlDataSource.SelectCommand = "Select ID, title, FROM myTable WHERE CONTAINS(description, @search)"
searchSqlDataSource.SelectParameters.Add("search", searchTextBox.Text)
searchSqlDataSource.DataBind()
End Sub
tnx in advac

View 2 Replies View Related

Input String Was Not In A Correct Format. Error

Apr 16, 2008

I have a page where user can insert a new record, i use stroed procedures:ALTER PROCEDURE [dbo].[sp_InsertTypes]
@Type varchar(10),
@Type_Desc varchar(35),
@Contact_Name varchar(20),
@Contact_Ad1 varchar(25),
@Contact_Ad2 varchar(25),
@Contact_City varchar(10),
@Contact_Phone varchar(12),
@Contact_Fax varchar(12),
@Contact_Email varchar(35)
Insert into dbo.Types (Type,Type_Desc,Contact_Name,Contact_Ad1,Contact_Ad2,Contact_City,Contact_Phone,
Contact_Fax,Contact_Email) values (@Type,@Type_Desc,@Contact_Name,@Contact_Ad1,@Contact_Ad2,@Contact_City,
@Contact_Phone, @Contact_Fax,@Contact_Email)
My code is:Protected Sub InsertButton_Click(ByVal sender As Object, ByVal e As System.EventArgs)
Dim myConnection As New SqlConnection(ConfigurationManager.ConnectionStrings("myConnectionString").ConnectionString)Dim myCommand As SqlCommand
Dim TypeTxt As TextBox = FormView1.FindControl("TypeTextBox")Dim DescTxt As TextBox = FormView1.FindControl("TypeDescTextBox")
Dim NameTxt As TextBox = FormView1.FindControl("ContactNameTextBox")Dim phoneTxt As TextBox = FormView1.FindControl("ContactPhoneTextBox")
Dim ad1Txt As TextBox = FormView1.FindControl("ContactAd1Textbox")Dim ad2Txt As TextBox = FormView1.FindControl("ContactAd2Textbox")
Dim cityTxt As TextBox = FormView1.FindControl("ContactCityTextbox")Dim faxTxt As TextBox = FormView1.FindControl("ContactFaxTextbox")
Dim emailTxt As TextBox = FormView1.FindControl("ContactEmailTextbox")myCommand = New SqlCommand("[dbo].[sp_Insert_Types]", myConnection)
myCommand.CommandType = CommandType.StoredProcedure
myCommand.Parameters.Add("@Type", SqlDbType.BigInt).Value = TypeTxt.Text
myCommand.Parameters.Add("@Type_Desc", SqlDbType.VarChar).Value = DescTxt.Text
myCommand.Parameters.Add("@Contact_Name", SqlDbType.VarChar).Value =  NameTxt.Text
myCommand.Parameters.Add("@Contact_Phone", SqlDbType.VarChar).Value = phoneTxt.Text
myCommand.Parameters.Add("@Contact_Ad1", SqlDbType.VarChar).Value = ad1Txt.Text
myCommand.Parameters.Add("@Contact_Ad2", SqlDbType.VarChar).Value = ad2Txt.Text
myCommand.Parameters.Add("@Contact_City", SqlDbType.VarChar).Value =  cityTxt.Text
myCommand.Parameters.Add("@Contact_Fax", SqlDbType.VarChar).Value =  faxTxt.Text
myCommand.Parameters.Add("@Contact_Email", SqlDbType.VarChar).Value = emailTxt.Text myConnection.Open()
myCommand.ExecuteNonQuery()
myConnection.Close()
End Sub
 I have almost the identical procedure & code for Update command button, and worked well, what am I doing wrong? I even tried adding ' in front and after the texts.
Thank you.

View 5 Replies View Related

Help With Input String Was Not In A Correct Format Error

May 29, 2008

I am trying to execute an SQL update statement as follows:myObj.Query("Update Schedule Set visitorScore=" + t1 + ", homeScore=" + t2 + " where id=" + Convert.ToInt16(HID.Value));However, I'm getting the following error message with regards to this line.: Exception Details: System.FormatException: Input string was not in a correct format.  Could anyone please tell me what is wrong with this line?  I have tried many different versions of this, but keep getting the same error. THANKS IN ADVANCE! 

View 3 Replies View Related

Error: Input String Was Not In A Correct Format?

Oct 20, 2005

Hi experts,  I am working on my asp.net application and received an error message on   dr = cmdGetFile.ExecuteReader:Error: Input string was not in a correct format. Can someone help me out of this?  Thank you in advance.------------------------------------------------------------------------------------ #Region " Web Form Designer Generated Code "
    <System.Diagnostics.DebuggerStepThrough()> Private Sub InitializeComponent()        Me.cmdGetFile = New System.Data.SqlClient.SqlCommand        Me.dbHRConn = New System.Data.SqlClient.SqlConnection        '        'cmdGetFile        '        Me.cmdGetFile.CommandText = "SELECT App_Resume_FileSize, App_Resume_FileName, App_Resume, App_Resume_FileType " & _        "FROM Mgmt_App_Resume_Table WHERE (Applicant_ID = @AppID)"        Me.cmdGetFile.Connection = Me.dbHRConn        Me.cmdGetFile.Parameters.Add(New System.Data.SqlClient.SqlParameter("@AppID", System.Data.SqlDbType.SmallInt, 2, "Applicant_ID"))        '        'dbHRConn        '        Me.dbHRConn.ConnectionString = "the connection string"
    End Sub
Private Sub Page_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load        Dim dr As System.Data.SqlClient.SqlDataReader        cmdGetFile.Parameters("@AppID").Value = Request("Applicant_ID")        dbHRConn.Open()        dr = cmdGetFile.ExecuteReader
        If dr.Read Then            Response.ContentType = dr("App_Resume_FileType").ToString            Response.OutputStream.Write(CType(dr("App_Resume"), _              Byte()), 0, CInt(dr("App_Resume_FileSize")))            Response.AddHeader("Content-Disposition", _              "attachment;filename=" + dr("App_Resume_FileName").ToString())        Else            Response.Write("File Not Found.")        End IfEnd Sub

View 5 Replies View Related

Import Data From Excel With Correct Format

Nov 30, 2005

Hi,    I have one column of data which is 15.678 but in the excel, i format it to 15.68 ( two decimal place, so in excel i should see 15.68), when i am trying to import the data from excel to sql server by using odbc connection, it still getting 15.678, how can i get the data from 15.678 to 15.68 ( what i see is wat i get).   Thanks for help.

View 7 Replies View Related

Fixing Phone Numbers To Correct Format

Aug 14, 2014

I am trying to find all the records in our database that have the incorrect phone number format and fix them to the correct format.

CREATE TABLE MDR (
SiteName nvarchar(255),
BusinessEmailAddress nvarchar(255),
FirstName nvarchar(255),
LastName nvarchar(255),
JobTitle nvarchar(255),
PersonBusinessPhoneNumber nvarchar(255),
SiteBusinessPhoneNumber nvarchar(255))

[code]....

View 1 Replies View Related

Transact SQL :: How To Find If Email Is Of Correct Format

Aug 13, 2015

I am getting email from the end client and i need to validate in sql query.

View 3 Replies View Related

Transact SQL :: Standard And Correct Cursor Format

Aug 12, 2015

I have a table which is a configuration table, I have declared cursors whereby the cursor doesn't get to all the rows in the configuration table even though there is no where clause in the select statement and the cursor ought to loop/go through every single row. Changed the cursor to the below and it started to go through all rows.

DECLARE XXX CURSOR LOCAL FORWARD_ONLY STATIC READ_ONLY TYPE_WARNING FOR

Now with the definition above, I am now having a situation whereby a column in row 1 which is a bit data type and has a value of 0, then the cursor gets to row 2 the same column but with a value of 1 and an if statement in the cursor saying

IF @row2columnX = 0 set @myval = 99

For some reason within the cursor the IF statement is being implemented even though the value in row2 columnX is = 1

I find it so weird. Is there a database property that affects the way cursors react or is there something that I am doing incorrectly ? Lastly, I would like to have a simple cursor template which simply goes through a configuration table or any table.

View 11 Replies View Related

Input String Was Not In A Correct Format For Formatted Currency

Nov 17, 2005

Ok, when I bind a textbox in my FormView I'm changing the format to
currency (<%# Bind("TotalValue","{0:c}") %>).  When I click
Update I get "Input string was not in a correct format" since
TotalValue is Int32 data type.

Shouldn't it convert it back to Int32 when it updates the db?  Or do I have to do it manually, and if so how?

View 2 Replies View Related

Reporting Services :: Input String Was Not In A Correct Format?

May 22, 2015

I get this error : [rsRuntimeErrorInExpression] The Value expression for the textrun ‘Textbox34.Paragraphs[0].TextRuns[0]’ contains an error: Input string was not in a correct format.

When i put this Expression in new field that i called C:

Fields!A.Value/Fields!B.Value

View 4 Replies View Related

Connect 2 DropDownList And Received Input String Was Not In A Correct Format

Jul 26, 2007

I have 2 DropDownList, the first one to display the product category and the other one to display the products based on the selected category. However, when I run code I received the following error message: Input string was not in a correct format.
Please find the code below.
Thanks,
Andy.
<%@ Page Language="C#" AutoEventWireup="true" CodeFile="Default.aspx.cs" Inherits="_Default" %><!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" >
<head runat="server"><title>Untitled Page</title>
</head>
<body>
<form id="form1" runat="server">
<div>
<asp:DropDownList ID="DropDownList1" runat="server" DataSourceID="SqlDataSource1"
DataTextField="Name" DataValueField="Name">
</asp:DropDownList>
 
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:Assignment2ConnectionString %>"
SelectCommand="SELECT [Name] FROM [Category]"></asp:SqlDataSource>
<br />
 
<asp:DropDownList ID="DropDownList2" runat="server" DataSourceID="SqlDataSource2"
DataTextField="Name" DataValueField="Name">
</asp:DropDownList>
 
<asp:SqlDataSource ID="SqlDataSource2" runat="server" ConnectionString="<%$ ConnectionStrings:Assignment2ConnectionString %>"
SelectCommand="SELECT [Name] FROM [Product] WHERE ([CategoryID] = @CategoryID2)">
<SelectParameters>
<asp:ControlParameter ControlID="DropDownList1" Name="CategoryID2" PropertyName="SelectedValue"
Type="Int32" />
</SelectParameters>
</asp:SqlDataSource>
 
</div></form>
</body>
</html>

View 1 Replies View Related

ARITHABORT

Oct 18, 2005

Hi All Gurus,

I am getting an error while inserting in table

INSERT failed because the following SET options have incorrect settings: 'ARITHABORT'.

There has been no change made in the database. It was working till yesterday.

Please help. Thanks in advance

Regards
Sachin Samuel

View 6 Replies View Related

ArithAbort Problem

Oct 16, 2007



Hiya

I have recently set up a view with a clustered and a non-clustered index on it (t-SQL is below). To create the view and indexes I set arithabort to on as per the help file articles. However, this setting is causing the following error when my application calls a stored procedure setting values in a table:


The transaction was rolled back for the following reason:
UPDATE failed because the following SET options have incorrect settings: 'ARITHABORT'. Verify that SET options are correct for use with indexed views and/or indexes on computed columns and/or query notifications and/or xml data type methods.
Last Query: MFSetApplicant

I am including 2 columns from the table the sp is trying to update in the view. The sp is a very basic update statement, setting all the values in the table row and using the primary key in the where clause. The sp ran fine with no errors prior to changing the setting of arithabort and adding the view and indexes and has been doing so for the last 5 years.

I have tried setting arithabort to off and the error keeps being thrown. I have tried tracing the transaction and can see nothing wrong with the way the sp is being used or the parameters being passed in. Is there any way to change this setting back to off so I can stop this error being thrown? Am I missing something obvious?

thanks



Code Block

SET NUMERIC_ROUNDABORT OFF;
SET ANSI_PADDING, ANSI_WARNINGS, CONCAT_NULL_YIELDS_NULL, ARITHABORT,
QUOTED_IDENTIFIER, ANSI_NULLS ON;
Go

CREATE VIEW [dbo].[View_LeadMatching] WITH SCHEMABINDING
AS
SELECT dbo.MFApplicants.ApplicantNo, dbo.MFApplicants.Surname, dbo.MFApplicantContactDetails.PostCode
FROM dbo.MFApplicants INNER JOIN dbo.MFApplicantContactDetails
ON dbo.MFApplicants.ApplicantNo = dbo.MFApplicantContactDetails.ApplicantNo
AND dbo.MFApplicants.MortgageRef = dbo.MFApplicantContactDetails.MortgageRef
GO
----------------------------------------------------------------------
CREATE UNIQUE CLUSTERED INDEX IX_View_LeadMatching_ApplicantNo
ON [View_LeadMatching] (ApplicantNo);
GO
----------------------------------------------------------------------
CREATE NONCLUSTERED INDEX IX_View_LeadMatching
ON [View_LeadMatching] (Surname, Postcode)
GO

View 1 Replies View Related

ArithAbort And ArithIgnore Options

Jul 26, 2006

Hi,
I was recently experiencing a slowness when executing stored procedures from a .NET Application, but it went fast when executing from Query Analyzer. Research led me to find that by turning ArithAbort ON that it forces the SQL Server to use the same Execution plan whether the request is coming from Query Analyzer or the Application.
My concern now is the effect of ArithAbort. I understand what turning this option does, but I am trying to think of a scenario where turning it on could be bad.  Does anyone have any suggestions on what I should be aware of when disabling/enabling ArithAbort or ArithIgnore?
Thanks.
-Brian

View 1 Replies View Related

Incorrect Settings Arithabort

Dec 3, 2007

INSERT [DELETE] failed because the following SET options have incorrect settings: 'ARITHABORT'. Verify that SET options are correct for use with indexed views and/or indexes on computed columns and/or query notifications and/or xml data type methods.
On local dev machine with SQL Express DB everything works fine. Once moved to shared hosting environment (with adjustments to web.config), insert and delete stored procedures produce the above error.
Made sure that stored procedures SET ARITHABORT ON at the beginning and OFF at the end, without success. Even SET ARITHABORT ON at DB level without success.
Suggestions appreciated
 

View 2 Replies View Related

ARITHABORT AND STORED PROCS

May 1, 2007

I wrote a stored procedure and set it as a schedule. it has no problem when I execute this SP in query analyzer. But it will show error when I execute it in schedule job.
I think the main reason is I have created a DDL trigger that will fire when DDL_DATABASE_LEVEL_EVENTS happens. Any solution?



SELECT failed because the following SET options have incorrect settings: 'ARITHABORT'. Verify that SET options are correct for use with indexed views and/or indexes on computed columns and/or query notifications and/or xml data type methods. [SQLSTATE 42000] (Error 1934). The step failed.

View 2 Replies View Related

SET Options Have Incorrect Settings: 'ARITHABORT'

Jul 20, 2005

Hi,I am getting the following error when I run a stored procedure inwhich I am inserting/deleting data from a view that selects from aremote table.INSERT failed because the following SET options have incorrectsettings: 'ARITHABORT'The first statement in the stored procedure is 'set arithabort on'. Ialso ran 'set arithabort on' before creating the view.I read many articles ragarding the setting of arithabort. I set it forthe connection, for the database (alter database) and above all forthe server (sp_configure) but could not get around the above error.However, when I had made the setting using "sp_configure 'useroptions', 64" I was able to run the stored procedure successfully acouple of times. But, later when I had resest 'user options' to 0 andthen back to 64 just to reproduce the earlier error and confirm thatthe error does not come with the 'user options' to 64 setting I wasgetting the same error.Is there any way by which I can overcome the problem?Thanks,Iqbal

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved