Hi, i need help please!
I want to show a count of the following:
Field values = "CFG1" , "CFG2"
So i want to count the number of "CFG2" values there are.
I tried something like this but does not work.
=count(Fields!Task.Value="CFG2")
Please Assist!
Regards
Greetings:
I am creating a complex expression in a Send Mail Task for the MessageSource. The expression contains the values of many package variables. I want to conditionally include some variables in the expression depending on what value they contain.
Is it possible to create conditional logic (if then else) within an expression? I've got to conditionally include 8 different variables.
Thanks,
BCB
Hello:Is it possible to use CASE expression in AND condition? i.e.------------------------------------------CREATE PROC spBlah( @id INT, @val INT)ASSELECT * FROM aTableWHERE tableID = @idAND ( CASE @val WHEN 1 THEN otherCol = someValue END CASE @val WHEN 2 THEN otherCol != someOtherVlaue END )-------------------------------------------
View 2 Replies View Related
Hai guys,
In my report I want to use OR condition instead of AND in Table Filter Expression. By default this option is disabled in VS2005 Pro. How do I enable this? or is there any other way to do this? Thanks in advance.
Hi,I am trying to create an update statementon a table with a foreign key to the Userstable (userid).I am getting the error:An expression of non-boolean type specified in a context where acondition is expected, near ')'.Below is the Update statement.UPDATELastLogin SETdate= '2007-08-14 05:34:09.910',status= 1 ,activity = 0WHERE(SELECT ll.status, ll.activity, ll.dateFROM LastLogin ll, Users uWHERE ll.userid = u.useridAND u.email = 'dushkin@hotmail.com')Thanks!
View 2 Replies View RelatedIs it possible to use a IIF IsNothing expression and check another condition? For all the values that are blank, I want it to check another column if "Disposition" = 2 then I want to show "Inactive"
=iif(isnothing(Fields!Value)," ","MS " & Fields!Value)
hi guys
I need to do a count on a column in my table but i have to check for a condition first.
Here is my sample data
Providerdate
Region
DHB
DHBName
PHO
PHOName
Practice
Practicename
PracticeAddress
Practice_Startdate
Practice_Enddate
Practitioner
PractitionerName
Practitioner_Startdate
Practitioner_Enddate
Locum
1/01/2006
Central
091
Capital & Coast DHB
585171
Kapiti PHO-585171
585171_0000045
Horatepai
15 Epiha Street, Paraparaumu
1/07/2003
29201
Geraldine Victoria MacKenzie Jordan
8/06/2005
31/10/2005
no
1/01/2006
Central
091
Capital & Coast DHB
585171
Kapiti PHO-585171
585171_0000045
Horatepai
15 Epiha Street, Paraparaumu
1/07/2003
22079
Glenn Morton Colquhoun
1/03/2006
NO
1/01/2006
Central
091
Capital & Coast DHB
585171
Kapiti PHO-585171
585171_0000045
Horatepai
15 Epiha Street, Paraparaumu
1/07/2003
14121
Meaburn Charles Staniland
1/07/2003
NO
1/01/2006
Central
091
Capital & Coast DHB
585171
Kapiti PHO-585171
585171_0000045
Horatepai
15 Epiha Street, Paraparaumu
1/07/2003
9877
Philip White
1/07/2003
NO
1/01/2006
Central
091
Capital & Coast DHB
585171
Kapiti PHO-585171
585171_0000045
Horatepai
15 Epiha Street, Paraparaumu
1/07/2003
11678
Susan Prudence Wilson
1/07/2003
NO
1/01/2006
Central
091
Capital & Coast DHB
585171
Kapiti PHO-585171
585171_0000045
Horatepai
15 Epiha Street, Paraparaumu
1/07/2003
3881
Wilfred Travis Wilson
5/01/2002
yes
1/01/2006
Central
091
Capital & Coast DHB
585171
Kapiti PHO-585171
585171_0000052
Paraparaumu Medical Centre
92-94 Kapiti Road, Paraparaumu
1/07/2003
22742
Adrian Howard Beaumont Gilliland
13/01/2005
28/10/2005
NO
1/01/2006
Central
091
Capital & Coast DHB
585171
Kapiti PHO-585171
585171_0000052
Paraparaumu Medical Centre
92-94 Kapiti Road, Paraparaumu
1/07/2003
18188
Amanda Mary Clarke
1/07/2003
NO
1/01/2006
Central
091
Capital & Coast DHB
585171
Kapiti PHO-585171
585171_0000052
Paraparaumu Medical Centre
92-94 Kapiti Road, Paraparaumu
1/07/2003
32909
Andre Honda Garib
29/12/2005
no
1/01/2006
Central
091
Capital & Coast DHB
585171
Kapiti PHO-585171
585171_0000052
Paraparaumu Medical Centre
92-94 Kapiti Road, Paraparaumu
1/07/2003
13042
Christopher Alan Fawcett
1/07/2003
NO
1/01/2006
Central
091
Capital & Coast DHB
585171
Kapiti PHO-585171
585171_0000052
Paraparaumu Medical Centre
92-94 Kapiti Road, Paraparaumu
1/07/2003
16556
Jennifer Maree O'Donnell
1/07/2003
22/12/2005
YES
1/01/2006
Central
091
Capital & Coast DHB
585171
Kapiti PHO-585171
585171_0000052
Paraparaumu Medical Centre
92-94 Kapiti Road, Paraparaumu
1/07/2003
13650
Timothy Stapleton Smith
1/07/2003
NO
1/01/2006
Central
091
Capital & Coast DHB
585171
Kapiti PHO-585171
585171_0000046
Paul Norton Surgery
51 Kapiti Road, Paraparaumu
1/07/2003
14621
Paul Stephen Norton
1/07/2003
NO
1/01/2006
Central
091
Capital & Coast DHB
585171
Kapiti PHO-585171
585171_0000053
Raumati Road Surgery
23 Raumati Road, Raumati Beach, Paraparaumu
1/07/2003
11202
Katherine Dana Stone
3/10/2005
7/10/2005
yes
1/01/2006
Central
091
Capital & Coast DHB
585171
Kapiti PHO-585171
585171_0000053
Raumati Road Surgery
23 Raumati Road, Raumati Beach, Paraparaumu
1/07/2003
13048
Robyn Lynette Crow
1/07/2003
NO
now i have to add two new columns as LocumYes and LocumNo
In Locumyes column I have to count the number of 'yes' in the locum column grouped by practitioner and in locumno i have to count the number of 'no' for that practitioner.
The situation is a practitioner can work on more than one practice and he can work as a 'yes' locum in one,'no' locum' in another or vice versa.It can be of any sort of combination.
so I have to do a query which should group by practitioner and count the number of yes and no for each practitioner..
Thanks
Mita
I am getting an error when running this query in SSRS- "an expression of non-boolean type specified in a context where a condition is expected , near ',' " on the following query in the WHERE clause section.
SELECT
MG_BL_ITINERARY.ETA_DT,
MG_BL_ITINERARY.TO_LOCATION_CD
FROM MG_BL_ITINERARY
[code]...
what I need to change in the WHERE clause to rectify this error ?
Not sure how to do this but here is example of what I have
Table A
ID data1 data2 data3 data4
1 535 452 213 554
2 325 651 321 554
3 654 846 096 355
4 765 658 321 422
I want to have a select that will pull the following information out with count = the number of rows that have matching data in data4
ID data1 count
1 535 2
2 325 2
3 654 1
4 765 1
Right now I am using a VB script to loop thru get the current data4 value then using SELECT COUNT(data1) AS count FROM tbl_toolerrors WHERE data4 = {data4 value currently looking at}
Of course this take a bunch of trips to database and I think there should be a way to do it. I was thinking of a nested SQL querry like
Select data1, data2, ID, data3, (select count ...) Order by data1
can anyone help?
I have the following code to send out an email if the row count of a table exceeds a certain number. But it seems to fire an email alert no matter what. condition check part of the code?
use msdb
go
create table ##resultset (
total int)
[code]...
I am using SQL Server 2008.Each stock item will have default 4 document type (1, 5, 6, 7) and each will have 3 zone's (1, 2, 3) to qualify. Each zone will be updated to 1 for that document type if the item successfully pass through it. If all zone are NULL means no transaction. How to retrieve only the failed rows which means not all zone are 1 or NULL.In the image GJ-00064 has one row failed. So how to get the count of failed rows for each item
Expected result:
Uniid <-> Stockcode <-> FailedRows
1670 <-> GJ-00064 <-> 1
Hello,
I am trying to create totals of the different values of a certain expression in the Report Footer. Currently I have the expression in a group which gives me a running subtotal of the 4 different values of the expression. Now I need 4 running Totals of the 4 different value subtotals. I tried placing some code in the Report Properties but I had a hard time trying to code visual basic within the editor.
Any info is helpful.
I want to count the rows in the Incident Table by using filters to limit the rows to be counted if they meet the below conditions. I know I need a logical test for each row of the incident table based on the apparatus table’s rows. But, I want to test for each row in the incident table, counting, but not returning a true or false in the overall measure.Something like look at each incident row, test for true or false and then count IF the statement is true. Then go to the next incident row and do the same. The aggregation would be the final count of “true” results.I tried this for MET objective:
=CALCULATE(COUNTROWS(incident),
apparatus[Incident Response Time] >-1 ||
apparatus[Incident Response Time] <320,
uv_901APP_TYPE[Description]="Engine",
uv_901INCIDENT[Top_Category]="Fire"
[code]....
Hello all,
I have a problem to do a count disctinct on two different fields within reporting services using an expression.
In my dataset i have a field called Description and a field called Type.
I would like to do a count distinct for every Description with Type=0 and a count distinct for every Description with Type=1.
Can this be done with an expression within RS (and not within my sql query from my dataset)?
Greetings
Vinnie
This is nutty. I never got this error on my local machine. The only lower case m in the sql is by near the variable Ratingsum like in line 59.
[SqlException (0x80131904): Incorrect syntax near 'm'.An expression of non-boolean type specified in a context where a condition is expected, near 'type'.] System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) +925466 System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +800118 System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +186 System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +1932 System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async) +196 System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe) +269 System.Data.SqlClient.SqlCommand.ExecuteNonQuery() +135 view_full_article.btnRating_Click(Object Src, EventArgs E) +565 System.Web.UI.WebControls.Button.OnClick(EventArgs e) +105 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +107 System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7 System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11 System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1746</pre></code>
Here is my button click sub in its entirety:
1 Sub btnRating_Click(ByVal Src As Object, ByVal E As EventArgs)
2 'Variable declarations...
3 Dim articleid As Integer
4 articleid = Request.QueryString("aid")
5 Dim strSelectQuery, strInsertQuery As String
6 Dim strCon As String
7 Dim conMyConnection As New System.Data.SqlClient.SqlConnection()
8 Dim cmdMyCommand As New System.Data.SqlClient.SqlCommand()
9 Dim dtrMyDataReader As System.Data.SqlClient.SqlDataReader
10 Dim MyHttpAppObject As System.Web.HttpContext = _
11 System.Web.HttpContext.Current
12 Dim strRemoteAddress As String
13 Dim intSelectedRating, intCount As Integer
14 Dim Ratingvalues As Decimal
15 Dim Ratingnums As Decimal
16 Dim Stars As Decimal
17 Dim Comments As String
18 Dim active As Boolean = False
19 Me.lblRating.Text = ""
20 'Get the user's ip address and cast its type to string...
21 strRemoteAddress = CStr(MyHttpAppObject.Request.UserHostAddress)
22 'Build the query string. This time check to see if IP address has already rated this ID.
23 strSelectQuery = "SELECT COUNT(*) As RatingCount "
24 strSelectQuery += "FROM tblArticleRating WHERE Itemid=" & articleid
25 strSelectQuery += " AND ip = '" & strRemoteAddress & "'"
26 'Open the connection, and execute the query...
27 strCon = System.Web.Configuration.WebConfigurationManager.ConnectionStrings("sqlConnectionString").ConnectionString
28 conMyConnection.ConnectionString = strCon
29 conMyConnection.Open()
30 cmdMyCommand.Connection = conMyConnection
31 cmdMyCommand.CommandType = System.Data.CommandType.Text
32 cmdMyCommand.CommandText = strSelectQuery
33 intCount = cmdMyCommand.ExecuteScalar()
34 intSelectedRating = Int(Me.rbRating.Text)
35 conMyConnection.Close()
36 'Close the connection to release these resources...
37
38 If intCount = 0 Then 'The user hasn't rated the article
39 'before, so perform the insert...
40 strInsertQuery = "INSERT INTO tblArticleRating (rating, ip, itemID, comment, active) "
41 strInsertQuery += "VALUES ("
42 strInsertQuery += intSelectedRating & ", '"
43 strInsertQuery += strRemoteAddress & "', "
44 strInsertQuery += articleid & ", '"
45 strInsertQuery += comment.Text & "', '"
46 strInsertQuery += active & "'); "
47 cmdMyCommand.CommandText = strInsertQuery
48 conMyConnection.Open()
49 cmdMyCommand.ExecuteNonQuery()
50 conMyConnection.Close()
51 Me.lblRating.Text = "Thanks for your vote!"
52 Comments = comment.Text.ToString
53
54 If Len(Comments) > 0 Then
55 emailadmin(comment.Text, articleid)
56 End If
57 'now update the article db for the two values but first get the correct ratings for the article
58 strSelectQuery = _
59 "SELECT SUM(rating) As RatingSum, COUNT(*) As RatingCount "
60 strSelectQuery += "FROM tblArticleRating WHERE Itemid=" & articleid
61 conMyConnection.Open()
62 cmdMyCommand.CommandText = strSelectQuery
63 dtrMyDataReader = cmdMyCommand.ExecuteReader()
64 dtrMyDataReader.Read()
65 Ratingvalues = Convert.ToDecimal(dtrMyDataReader("RatingSum").ToString)
66 Ratingnums = Convert.ToDecimal(dtrMyDataReader("RatingCount").ToString)
67 Stars = Ratingvalues / Ratingnums
68 conMyConnection.Close()
69 'Response.Write("Values: " & Ratingvalues)
70 'Response.Write("Votes: " & Ratingnums)
71
72 UpdateRating(articleid, Stars, Ratingnums)
73 Else 'The user has rated the article before, so display a message...
74 Me.lblRating.Text = "You've already rated this article"
75 End If
76 strSelectQuery = _
77 "SELECT SUM(rating) As RatingSum, COUNT(*) As RatingCount "
78 strSelectQuery += "FROM tblArticleRating WHERE Itemid=" & articleid
79 conMyConnection.Open()
80 cmdMyCommand.CommandText = strSelectQuery
81 dtrMyDataReader = cmdMyCommand.ExecuteReader()
82 dtrMyDataReader.Read()
83 Ratingvalues = Convert.ToDecimal(dtrMyDataReader("RatingSum").ToString)
84 Ratingnums = Convert.ToDecimal(dtrMyDataReader("RatingCount").ToString)
85 Stars = Ratingvalues / Ratingnums
86 If (Ratingnums = 1) And (Stars <= 1) Then
87 lblRatingCount.Text =" (" & (String.Format("{0:f2}", Stars)) & ") / " & dtrMyDataReader("RatingCount") & " Vote"
88 ElseIf (Ratingnums = 1) And (Stars > 1) Then
89 lblRatingCount.Text = " (" & (String.Format("{0:f2}", Stars)) & ") / " & dtrMyDataReader("RatingCount") & " Vote"
90 ElseIf (Ratingnums > 1) And (Stars <= 1) Then
91 lblRatingCount.Text =" (" & (String.Format("{0:f2}", Stars)) & ") / " & dtrMyDataReader("RatingCount") & " Votes"
92 ElseIf (Ratingnums > 1) And (Stars > 1) Then
93 lblRatingCount.Text = " (" & (String.Format("{0:f2}", Stars)) & ") / " & dtrMyDataReader("RatingCount") & " Votes"
94 End If
95
96 'Response.Write(String.Format("{0:f2}", Stars))
97 'Response.Write("Values: " & Ratingvalues)
98 'Response.Write("Votes: " & Ratingnums)
99 If (Stars > 0) And (Stars <= 0.5) Then
100 Me.Rating.ImageUrl ="./images/rating/05star.gif"
101 ElseIf (Stars > 0.5) And (Stars < 1.0) Then
102 Me.Rating.ImageUrl = "./images/rating/05star.gif"
103 ElseIf (Stars >= 1.0) And (Stars < 1.5) Then
104 Me.Rating.ImageUrl = "./images/rating/1star.gif"
105 ElseIf (Stars >= 1.5) And (Stars < 2.0) Then
106 Me.Rating.ImageUrl = "./images/rating/15star.gif"
107 ElseIf (Stars >= 2.0) And (Stars < 2.5) Then
108 Me.Rating.ImageUrl = "./images/rating/2star.gif"
109 ElseIf (Stars >= 2.5) And (Stars < 3.0) Then
110 Me.Rating.ImageUrl = "./images/rating/25star.gif"
111 ElseIf (Stars >= 3.0) And (Stars < 3.5) Then
112 Me.Rating.ImageUrl = "./images/rating/3star.gif"
113 ElseIf (Stars >= 3.5) And (Stars < 4.0) Then
114 Me.Rating.ImageUrl = "./images/rating/35star.gif"
115 ElseIf (Stars >= 4.0) And (Stars < 4.5) Then
116 Me.Rating.ImageUrl = "./images/rating/4star.gif"
117 ElseIf (Stars >= 4.5) And (Stars < 5.0) Then
118 Me.Rating.ImageUrl = "./images/rating/45star.gif"
119 ElseIf (Stars >= 4.5) And (Stars <= 5.0) Then
120 Me.Rating.ImageUrl = "./images/rating/5star.gif"
121 End If
122 dtrMyDataReader.Close()
123 conMyConnection.Close()
124 End Sub
If you want to reduplicate the error, click over here and try to submit a rating:
http://www.link-exchangers.com/view_full_article.aspx?aid=51
Thanks for helping me figure this out.
Hi everyone,
I have created a report which has 3 groups. The report output as shown below. I am having trouble getting the SUM of Total Credtis for each Org.
Can't seem to get the total 42 and 16 (highlighted), but can get total unists 11 and 13. I get expression contains aggregate function. This is because Units assessed is the Count of IDs (details hidden from the report).
Report has three groups Org , Assessor and Unit.
Can someone please help me with this?
Appreciate help.
Thank you,
Ski
Org 1(Group1)
Unit Credits Units Assessed(# of Trainees) TotalCredits
Assessor 1 Unit 1 2 4 (Count of Ids) 8 (2*4)
Assessor 2 Unit 2 1 2 2 (1*2)
Assessor 3 Unit 3 5 2 10 (5*2)
Unit 4 2 1 2
Assessor 4 Unit 5 10 2 20
--------------------------------------------------------------------------------------------------------
11 42 -----------------------------------------------------------------------------------------------------------
Org 2
Assessor 3 Unit 1 2 3 6
Assessor 4 Unit 6 1 10 10
--------------------------------------------------------------------------------------------------------
13 16
--------------------------------------------------------------------------------------------------------
My report has two data sets that hold inventory from two different departments.
ds_DeptA and ds_DeptB
I have a table, that pulls the DeptB status of DeptA record and displays it. This returns empty when the lookup fails to make a match, which is fine. Typically means DeptB does not have the record yet. I need to count these empty (null) feilds and populate it in a Text box outside of the table.
I just can't figure out the syntax with multiple datasets. I can't use the lookup expression as part of the count expression since the count expression is not contained in a table that has a dataset.
table: ds_DeptA
fields:
ID
Name
date_set_to_DeptB
<<Expr>> =Lookup(Fields!ID.Value,Fields!DeptA_ID.Value,Fields!DeptB_Status.Value, "ds_DeptB")
For example..
select * from mytable where MyNum = 7
If this brings back more than 1 row, I want to display a message that says,
Print 'There is more than one row returned'
Else (If only 1 row returned), I don't want to print anything.
Can I do this? Thx!
Dear friends,
I'm having a problem... maybe it's very simple, but with soo many work, right now I can't think well...
I need to filter rows in a dataflow...
I created a condition spli to that... maybe there is a better solution...
And the condition is: Datex != NULL(DT_DATE)
(Some DATE != NULL)
[Eliminar Datex NULL [17090]] Error: The expression "Datex != NULL(DT_DATE)" on "output "Case 1" (17123)" evaluated to NULL, but the "component "Eliminar Datex NULL" (17090)" requires a Boolean results. Modify the error row disposition on the output to treat this result as False (Ignore Failure) or to redirect this row to the error output (Redirect Row). The expression results must be Boolean for a Conditional Split. A NULL expression result is an error.
What is wrong??
Regards,
Pedro
I am trying to write an visibility function to have message shown based on two different IIF conditions:
If behavior is to Add a customer ( if message =NAME ALREADY EXISTS, return " NAME ALREADY EXISTS", otherwize return " NAME CREATED")If behavior is to Delete a customer (( if message =NAME DOES NOT EXIST, return "NAME DOES NOT EXIST", otherwize return "NAME SUCCESSFULLY DELETED")
I tried the following which doesn't work:
=IIF((UCase(First(Fields!Message.Value, "DataSetName")) = "NAME ALREADY EXISTS"), "WARNING: NAME ALREADY EXIST", "NAME CREATED"),
IIF((UCase(First(Fields!Message.Value, "DataSetName")) = " NAME DOES NOT EXIST"), "WARNING: NAME DOES NOT EXIST", " NAME DELETED")
I write a query to get some data as the following. but i need when a user check specified condition a query parameter change to specified condition :
create proc proc_ReservationDetails
(
@status nvarchar(50) = null
)
as
begin
select reservationId, reservationStatus, reservationDesc
[Code] .....
Error 3 Error loading MLS_AZ_PHX.dtsx: The result of the expression ""C:\sql_working_directory\MLS\AZ\Phoenix\Docs\Armls_Schema Updated 020107.xls"" on property "ConnectionString" cannot be written to the property. The expression was evaluated, but cannot be set on the property. c:documents and settingsviewmastermy documentsvisual studio 2005projectsm l sMLS_AZ_PHX.dtsx 1 1
"C:\sql_working_directory\MLS\AZ\Phoenix\Docs\Armls_Schema Updated 020107.xls"
Directly using C:sql_working_directoryMLSAZPhoenixDocsArmls_Schema Updated 020107.xls
as connectionString works
However - I'm trying to deploy the package - and trying to use expression:
@[User::DIR_WORKING] + "\Docs\Armls_Schema Updated 020107.xls"
which causes the same error to occur
(Same error with other Excel source also:
Error 5 Error loading MLS_AZ_PHX.dtsx: The result of the expression "@[User::DIR_WORKING] + "\Docs\Armls_SchoolCodesJuly06.xls"" on property "ConnectionString" cannot be written to the property. The expression was evaluated, but cannot be set on the property. c:documents and settingsviewmastermy documentsvisual studio 2005projectsm l sMLS_AZ_PHX.dtsx 1 1
)
I have created 1 report with 2 datasets. This report is attached to the 1st dataset.For example,1st one is "Smallappliances", 2nd is "Largeappliances".
I created a tablix and, the 1st column extracts Total sales per Sales person between 2 dates from 1st dataset (Small appliances). I used running values expression and it works fine.
Now, I would like to add another column that extracts Total sales per sales person between 2 dates from 2nd dataset (Large appliances). I am aware that I need to use Lookup expression and it is giving me the single sales value rather than the total sales values. So, I wanted to use RunningValue expression within lookup table to get total sales for large appliances.
This is the lookup expression that I added for the 2nd column.
=Lookup(Fields!salesperson.Value,Fields!sales_person.Value,RunningValue(Fields!sales_amount.Value,
sum, " sales_person"),
"Largeappliances").
I get this error when I preview the report.An error occurred during local report processing.The definition of the report is invalid.An unexpected error occurred in report processing.
(processing): (SortExpression ++ m_context.ExpressionType)
With the function below, I receive this error:Error:Transaction count after EXECUTE indicates that a COMMIT or ROLLBACK TRANSACTION statement is missing. Previous count = 1, current count = 0.Function:Public Shared Function DeleteMesssages(ByVal UserID As String, ByVal MessageIDs As List(Of String)) As Boolean Dim bSuccess As Boolean Dim MyConnection As SqlConnection = GetConnection() Dim cmd As New SqlCommand("", MyConnection) Dim i As Integer Dim fBeginTransCalled As Boolean = False
'messagetype 1 =internal messages Try ' ' Start transaction ' MyConnection.Open() cmd.CommandText = "BEGIN TRANSACTION" cmd.ExecuteNonQuery() fBeginTransCalled = True Dim obj As Object For i = 0 To MessageIDs.Count - 1 bSuccess = False 'delete userid-message reference cmd.CommandText = "DELETE FROM tblUsersAndMessages WHERE MessageID=@MessageID AND UserID=@UserID" cmd.Parameters.Add(New SqlParameter("@UserID", UserID)) cmd.Parameters.Add(New SqlParameter("@MessageID", MessageIDs(i).ToString)) cmd.ExecuteNonQuery() 'then delete the message itself if no other user has a reference cmd.CommandText = "SELECT COUNT(*) FROM tblUsersAndMessages WHERE MessageID=@MessageID1" cmd.Parameters.Add(New SqlParameter("@MessageID1", MessageIDs(i).ToString)) obj = cmd.ExecuteScalar If ((Not (obj) Is Nothing) _ AndAlso ((TypeOf (obj) Is Integer) _ AndAlso (CType(obj, Integer) > 0))) Then 'more references exist so do not delete message Else 'this is the only reference to the message so delete it permanently cmd.CommandText = "DELETE FROM tblMessages WHERE MessageID=@MessageID2" cmd.Parameters.Add(New SqlParameter("@MessageID2", MessageIDs(i).ToString)) cmd.ExecuteNonQuery() End If Next i
' ' End transaction ' cmd.CommandText = "COMMIT TRANSACTION" cmd.ExecuteNonQuery() bSuccess = True fBeginTransCalled = False Catch ex As Exception 'LOG ERROR GlobalFunctions.ReportError("MessageDAL:DeleteMessages", ex.Message) Finally If fBeginTransCalled Then Try cmd = New SqlCommand("ROLLBACK TRANSACTION", MyConnection) cmd.ExecuteNonQuery() Catch e As System.Exception End Try End If MyConnection.Close() End Try Return bSuccess End Function
below data,
Countery
parentid
CustomerSkId
sales
A
29097
29097
10
A
29465
29465
30
A
30492
30492
40
[code]....
Output
Countery
parentCount
A
8
B
3
c
3
in my count function,my code look like,
set buyerset as exists(dimcustomer.leval02.allmembers,custoertypeisRetailers,"Sales")
set saleset(buyerset)
set custdimensionfilter as {custdimensionmemb1,custdimensionmemb2,custdimensionmemb3,custdimensionmemb4}
set finalset as exists(salest,custdimensionfilter,"Sales")
Set ProdIP as dimproduct.dimproduct.prod1
set Othersset as (cyears,ProdIP)
(exists(([FINALSET],Othersset,dimension2.dimension2.item3),[DimCustomerBuyer].[ParentPostalCode].currentmember, "factsales")).count
it will take 12 to 15 min to execute.
Hi
I am developing a scientific application (demographic forecasting) and have a situation where I need to update a variety of rows, say the ith, jth and kth row that meets a particular condition, say, x.
I also need to adjust rows, say mth and nth that meet condition , say y.
My current solution is laborious and has to be coded for each condition and has been set up below (If you select this entire piece of code it will create 2 databases, each with a table initialised to change the 2nd,4th,8th and 16th rows, with the first database ignoring the condition and with the second applying the change only to rows with 'type1=1' as the condition.)
This is an adequate solution, but if I want to change the second row meeting a second condition, say 'type1=2', I would need to have another WITH...SELECT...INNER JOIN...UPDATE and I'm sure this would be inefficient.
Would there possibly be a way to introduce a rank by type into the table, something like this added column which increments for each type:
ID
Int1
Type1
Ideal Rank by Type
1
1
1
1
2
1
1
2
3
2
1
3
4
3
1
4
5
5
1
5
6
8
2
1
7
13
1
6
8
21
1
7
9
34
1
8
10
55
2
2
11
89
1
9
12
144
1
10
13
233
1
11
14
377
1
12
15
610
1
13
16
987
2
3
17
1597
1
14
18
2584
1
15
19
4181
1
16
20
6765
1
17
The solution would then be a simple update based on an innerjoin reflecting the condition and rank by type...
I hope this posting is clear, albeit long.
Thanks in advance
Greg
PS The code:
USE
master
GO
CREATE DATABASE CertainRowsToChange
GO
USE CertainRowsToChange
GO
CREATE TABLE InitialisedValues
(
InitialisedValuesID int identity(1 ,1) NOT NULL PRIMARY KEY,
Int1 int NOT NULL
)
GO
CREATE PROCEDURE Initialise
AS
BEGIN
INSERT INTO InitialisedValues (Int1 )
SELECT 2
INSERT INTO InitialisedValues (Int1 )
SELECT 4
INSERT INTO InitialisedValues (Int1 )
SELECT 8
INSERT INTO InitialisedValues (Int1 )
SELECT 16
END
GO
EXEC Initialise
/*=======================================================*/
CREATE TABLE AllRows
(
AllRowsID int identity(1 ,1) NOT NULL PRIMARY KEY,
Int1 int NOT NULL
)
GO
CREATE TABLE RowsToChange
(
RowsToChangeID int identity(1 ,1) NOT NULL PRIMARY KEY,
Int1 int NOT NULL
)
GO
CREATE PROCEDURE InitialiseRowsToChange
AS
BEGIN
INSERT INTO RowsToChange (Int1 )
SELECT 2
INSERT INTO RowsToChange (Int1 )
SELECT 4
INSERT INTO RowsToChange (Int1 )
SELECT 8
INSERT INTO RowsToChange (Int1 )
SELECT 16
END
GO
EXEC InitialiseRowsToChange
GO
CREATE PROCEDURE PopulateAllRows
AS
BEGIN
INSERT INTO AllRows (Int1 )
SELECT 1
INSERT INTO AllRows (Int1 )
SELECT 1
INSERT INTO AllRows (Int1 )
SELECT 2
INSERT INTO AllRows (Int1 )
SELECT 3
INSERT INTO AllRows (Int1 )
SELECT 5
INSERT INTO AllRows (Int1 )
SELECT 8
INSERT INTO AllRows (Int1 )
SELECT 13
INSERT INTO AllRows (Int1 )
SELECT 21
INSERT INTO AllRows (Int1 )
SELECT 34
INSERT INTO AllRows (Int1 )
SELECT 55
INSERT INTO AllRows (Int1 )
SELECT 89
INSERT INTO AllRows (Int1 )
SELECT 144
INSERT INTO AllRows (Int1 )
SELECT 233
INSERT INTO AllRows (Int1 )
SELECT 377
INSERT INTO AllRows (Int1 )
SELECT 610
INSERT INTO AllRows (Int1 )
SELECT 987
INSERT INTO AllRows (Int1 )
SELECT 1597
INSERT INTO AllRows (Int1 )
SELECT 2584
INSERT INTO AllRows (Int1 )
SELECT 4181
INSERT INTO AllRows (Int1 )
SELECT 6765
END
GO
EXEC PopulateAllRows
GO
SELECT * FROM AllRows
GO
WITH Temp(OrigID)
AS
(
SELECT OrigID FROM
(SELECT Row_Number() OVER (ORDER BY AllRowsID Asc ) AS RowScore, AllRowsID AS OrigID, Int1 AS OrigValue FROM Allrows) AS FromTable
INNER JOIN
RowsToChange AS ToTable
ON FromTable.RowScore = ToTable.Int1
)
UPDATE AllRows
SET Int1=1000
FROM
Temp as InTable
JOIN Allrows as OutTable
ON Intable.OrigID = OutTable.AllRowsID
GO
SELECT * FROM AllRows
GO
USE
master
GO
CREATE DATABASE ComplexCertainRowsToChange
GO
USE ComplexCertainRowsToChange
GO
CREATE TABLE InitialisedValues
(
InitialisedValuesID int identity(1 ,1) NOT NULL PRIMARY KEY,
Int1 int NOT NULL
)
GO
CREATE PROCEDURE Initialise
AS
BEGIN
INSERT INTO InitialisedValues (Int1 )
SELECT 2
INSERT INTO InitialisedValues (Int1 )
SELECT 4
INSERT INTO InitialisedValues (Int1 )
SELECT 8
INSERT INTO InitialisedValues (Int1 )
SELECT 16
END
GO
EXEC Initialise
/*=======================================================*/
CREATE TABLE AllRows
(
AllRowsID int identity(1 ,1) NOT NULL PRIMARY KEY,
Int1 int NOT NULL,
Type1 int NOT NULL
)
GO
CREATE TABLE RowsToChange
(
RowsToChangeID int identity(1 ,1) NOT NULL PRIMARY KEY,
Int1 int NOT NULL,
Type1 int NOT NULL
)
GO
CREATE PROCEDURE InitialiseRowsToChange
AS
BEGIN
INSERT INTO RowsToChange (Int1,Type1 )
SELECT 2, 1
INSERT INTO RowsToChange (Int1,Type1 )
SELECT 4, 1
INSERT INTO RowsToChange (Int1,Type1 )
SELECT 8, 1
INSERT INTO RowsToChange (Int1,Type1 )
SELECT 16, 1
END
GO
EXEC InitialiseRowsToChange
GO
CREATE PROCEDURE PopulateAllRows
AS
BEGIN
INSERT INTO AllRows (Int1, Type1 )
SELECT 1, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 1, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 2, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 3, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 5, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 8, 2
INSERT INTO AllRows (Int1, Type1 )
SELECT 13, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 21, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 34, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 55, 2
INSERT INTO AllRows (Int1, Type1 )
SELECT 89, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 144, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 233, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 377, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 610, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 987, 2
INSERT INTO AllRows (Int1, Type1 )
SELECT 1597, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 2584, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 4181, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 6765, 1
END
GO
EXEC PopulateAllRows
GO
SELECT * FROM AllRows
GO
WITH Temp(OrigID)
AS
(
SELECT OrigID FROM
(SELECT Row_Number() OVER (ORDER BY AllRowsID Asc ) AS RowScore, AllRowsID AS OrigID, Int1 AS OrigValue FROM Allrows WHERE Type1=1) AS FromTable
INNER JOIN
RowsToChange AS ToTable
ON FromTable.RowScore = ToTable.Int1
)
UPDATE AllRows
SET Int1=1000
FROM
Temp as InTable
JOIN Allrows as OutTable
ON Intable.OrigID = OutTable.AllRowsID
GO
SELECT * FROM AllRows
GO
I am trying to get count on a varchar field, but it is not giving me distinct count. How can I do that? This is what I have....
Select Distinct
sum(isnull(cast([Total Count] as float),0))
from T_Status_Report
where Type = 'LastMonth' and OrderVal = '1'
I use SQL 2000
I have a Column named Bool , the value in this Column is 0?0?1?1?1
I no I can use Count() to count this column ,the result would be "5"
but what I need is "2" and "3" and then I will show "2" and "3" in my DataGrid
as the True is 2 and False is 3
the Query will have some limited by a Where Query.. but first i need to know .. how to have 2 result count
could it be done by Count()? please help.
thank you very much
SQL 2000I have a table with 5,100,000 rows.The table has three indices.The PK is a clustered index and has 5,000,000 rows - no otherconstraints.The second index has a unique constraint and has 4,950,000 rows.The third index has no constraints and has 4,950,000 rows.Why the row count difference ?Thanks,Me.
View 5 Replies View RelatedThe following query returns a value of 0 for the unit percent when I do a count/subquery count. Is there a way to get the percent count using a subquery? Another section of the query using the sum() works.
Here is a test code snippet:
--Test Count/Count subquery
declare @Date datetime
set @date = '8/15/2007'
select
-- count returns unit data
Count(substring(m.PTNumber,3,3)) as PTCnt,
-- count returns total for all units
(select Count(substring(m1.PTNumber,3,3))
from tblVGD1_Master m1
left join tblVGD1_ClassIII v1 on m1.SlotNum_ID = v1.SlotNum_ID
Where left(m1.PTNumber,2) = 'PT' and m1.Denom_ID <> 9
and v1.Act = 1 and m1.Active = 1 and v1.MnyPlyd <> 0
and not (v1.MnyPlyd = v1.MnyWon and v1.ActWin = 0)
and v1.[Date] between DateAdd(dd,-90,@Date) and @Date) as TotalCnt,
-- attempting to calculate the percent by PTCnt/TotalCnt returns 0
(Count(substring(m.PTNumber,3,3)) /
(select Count(substring(m1.PTNumber,3,3))
from tblVGD1_Master m1
left join tblVGD1_ClassIII v1 on m1.SlotNum_ID = v1.SlotNum_ID
Where left(m1.PTNumber,2) = 'PT' and m1.Denom_ID <> 9
and v1.Act = 1 and m1.Active = 1 and v1.MnyPlyd <> 0
and not (v1.MnyPlyd = v1.MnyWon and v1.ActWin = 0)
and v1.[Date] between DateAdd(dd,-90,@Date) and @Date)) as AUPct
-- main select
from tblVGD1_Master m
left join tblVGD1_ClassIII v on m.SlotNum_ID = v.SlotNum_ID
Where left(m.PTNumber,2) = 'PT' and m.Denom_ID <> 9
and v.Act = 1 and m.Active = 1 and v.MnyPlyd <> 0
and not (v.MnyPlyd = v.MnyWon and v.ActWin = 0)
and v.[Date] between DateAdd(dd,-90,@Date) and @Date
group by substring(m.PTNumber, 3,3)
order by AUPct Desc
Thanks. Dan
Hi all
i using lookup error output to insert rows into table
Rows count rows has been inserted on the table 59,123,019 mill
table rows count 6,878,110 mill ............................
any ideas
da = New Data.SqlClient.SqlDataAdapter("SELECT [Products].[Names], Count([ProductList].[Products]) AS [Total] FROM [Products] LEFT JOIN [ProductList] ON [ProductList].[Names] = [Products].[Names] GROUP BY [Products].[Names] ", strConnection)
can we use a where condition in the statement.If so how can we use it.
Hi all,I'm building a DataSet on Visual Studio and don't know how to do a condition (if/else) with SQL... I have a search form, with a DropDownList and have 2 options in it: Search by Title or Search by Author. If the "Title" is selected, then the value is "title and if "Author" is selected, then the value is "author".Here is what I have right now for the DataSet, as seperated queries but I think I can combine them to be one single query 1.This will returns the songs that matches the title:SELECT LYRICS_PK, LYRICS_TITLE, LYRICS_TITLE2, LYRICS_WRITER, LYRICS_WRITER2, LYRICS_COWRITER, LYRICS_DATE_ADDED, UserId_FK, LYRICS_APPROVED, LYRICS_TYPE, LYRICS_VIEWS, LYRICS_ADDED_BYFROM t_lyricsWHERE ((@LYRICS_TITLE IS NULL) OR (LYRICS_TITLE LIKE '%' + @LYRICS_TITLE + '%') OR (LYRICS_TITLE2 LIKE '%' + @LYRICS_TITLE + '%')) AND (@LYRICS_TYPE = 'title') 2. This returns the songs that matches the author: SELECT LYRICS_PK, LYRICS_TITLE, LYRICS_TITLE2, LYRICS_WRITER,
LYRICS_WRITER2, LYRICS_COWRITER, LYRICS_DATE_ADDED, UserId_FK,
LYRICS_APPROVED, LYRICS_TYPE, LYRICS_VIEWS, LYRICS_ADDED_BY
FROM t_lyrics
WHERE ((@LYRICS_AUTHOR IS NULL) OR (LYRICS_AUTHOR LIKE '%' +
@LYRICS_AUTHOR + '%') OR (LYRICS_AUTHOR2 LIKE '%' + @LYRICS_AUTHOR + '%'))
AND (@LYRICS_TYPE = 'author') This is very inefficient because I have 2 queries, and I need to build 2 ObjectDataSources as well as 2 different GridViews to display the results. I think we can do something likeSELECT .... ... FROM t_lyricsif (@LYRICS_TYPE = 'title') DO THE WHERE CLAUSE THAT RETURNS MATCHES WITH TITLEelse if (@LYRICS_TYPE = 'author') DO THE WHERE CLAUSE THAT RETURNS MATCHES WITH AUTHOR But I don't know how to write that in T-SQL.Any help would be greatly appreciated,Thank you very much,Kenny.