I am trying to create a database and I manage to get the code right for dropping the database if it already exists and then createing the data file and log file. After this I try to set some options for the database with the following code
ALTER DATABASE MyDataWarehouse
SET RECOVERY SIMPLE,
ANSI_NULLS ON,
ANSI_PADDING ON,
ANSI_WARNINGS ON,
ARITHABORT ON,
CONCAT_NULL_YIELDS_NULL ON,
QUOTED_IDENTIFIER ON,
NUMERIC_ROUNDABORT OFF,
PAGE_VERIFY CHECKSUM,
ALLOW_SNAPSHOT_ISOLATION ON;
GO
But I get an error saying Incorrect syntax near 'CHECKSUM'.
CREATE TABLE Agents(ID COUNTER NOT NULL CONSTRAINT constraintName_pk PRIMARY KEY,Name VARCHAR(255),Supervisor INTEGER,MasterCalendarVisible BOOLEAN default false)I'm using this against an Access DB using JET driver... I keep gettinga syntax error which goes away when I remove the last line... Anyideas whats wrong with it?Thanks!
The error occurred in D:HostingkpstoolinsertPage.cfm: line 132 130 : datasource= "kpstool_accesscf_jobs"> 131 : INSERT INTO Jobs (Position, Needs, Necessary) 132 : VALUES ('#form.Position#','#form.Needs#','#form.Necessary#') 133 : </cfquery> 134 : <cfoutput>
This is the code for the form that this code is referring to: <form action="insertpage.cfm" method="post" name="Form" id="Form"> Position: <input type="text" name="Position" size="25" maxlength="25"> <br> <input type="hidden" name="Position_required" value="You must enter position"> <br> Needs: <input type="text" name="Needs" size="25" maxlength="25"> <br> Necessary:
I'm trying to attach a database file and it's associated database log file to SQL Server. However I am using the 'SQLDataRoot' value from the registry to determine the absolute path to the DB file and DB log file. Like so...
USE [master]
DECLARE @RC int
/* read path to SQL Server Express Data directory from registry */ DECLARE @sql_server_data_dir sysname EXEC @RC = master..xp_regread N'HKEY_LOCAL_MACHINE',N'SOFTWAREMicrosoftMicrosoft SQL ServerMSSQL.1Setup',N'SQLDataRoot', @sql_server_data_dir OUTPUT SET @sql_server_data_dir = @sql_server_data_dir + N'Data'
CREATE DATABASE [PROJECT_DB] ON (FILENAME = '''' + @sql_server_data_dir + 'PROJECT_DB.mdf'''), (FILENAME = '''' + @sql_server_data_dir + 'PROJECT_DB_log.ldf''') FOR ATTACH;
GO
I have also tried using the sp_attach_db stored procedure as follows
got rid of my error about user login rights, it was all working yesterday. but for some reason i now get this error CREATE DATABASE permission denied in database 'master'. An attempt to attach an auto-named database for file C:InetpubwwwrootsqlSiteApp_DatasiteDB.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: CREATE DATABASE permission denied in database 'master'. An attempt to attach an auto-named database for file C:InetpubwwwrootsqlSiteApp_DatasiteDB.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[SqlException (0x80131904): CREATE DATABASE permission denied in database 'master'. An attempt to attach an auto-named database for file C:InetpubwwwrootsqlSiteApp_DatasiteDB.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.] System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +734995 System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188 System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +1838 System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK) +33 System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +628 System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +170 System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +359 System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28 System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424 System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66 System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +496 System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82 System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105 System.Data.SqlClient.SqlConnection.Open() +111 System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +121 System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +137 System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, String srcTable) +83 System.Web.UI.WebControls.SqlDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments) +1770 System.Web.UI.DataSourceView.Select(DataSourceSelectArguments arguments, DataSourceViewSelectCallback callback) +17 System.Web.UI.WebControls.DataBoundControl.PerformSelect() +149 System.Web.UI.WebControls.BaseDataBoundControl.DataBind() +70 System.Web.UI.WebControls.GridView.DataBind() +4 System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound() +82 System.Web.UI.WebControls.CompositeDataBoundControl.CreateChildControls() +69 System.Web.UI.Control.EnsureChildControls() +87 System.Web.UI.Control.PreRenderRecursiveInternal() +41 System.Web.UI.Control.PreRenderRecursiveInternal() +161 System.Web.UI.Control.PreRenderRecursiveInternal() +161 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1360 i have this in my web.config file <connectionStrings> <add name="ConnectionStringTest" connectionString="Data Source=.SQLEXPRESS;AttachDbFilename=C:InetpubwwwrootsqlSiteApp_DatasiteDB.mdf;Integrated Security=SSPI;Connect Timeout=30;User Instance=False" providerName="System.Data.SqlClient" /> </connectionStrings> <appSettings /> <system.web> <!-- Set compilation debug="true" to insert debugging symbols into the compiled page. Because this affects performance, set this value to true only during development. --> <compilation debug="true" /> <identity impersonate="true"/> and my asp connection string is <asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:ConnectionStringTest %>" SelectCommand="SELECT [entryID], [compID], [emailAddy], [answer] FROM [entry]"></asp:SqlDataSource> if i set user instance to true i get a user permission error. it says on sql server management that i have dbo rights on my database, but it wont let me put datareader or write on this login. any ideas? its driving me insane
I am trying to create a database in my application's installation folder and it will not create because the folder does not have the permissions for the service account added as full control. I can't figure out how to get the service account name in my program so that I can add it to the folder permissions. The service name is a long name and has the computer name and the SQL server name included in it. For example: SQLServer2005MSSQLUser$<Ccmputer Name>$SQLEXPRESS. I'm assuming this pattern is always followed. I guess my question is can I query the database for this information and then use it to add the appropriate permissions to my application's install folder?
I am a complete newbie here. I have spent hours trying to create a database - (even installed on XP and Vista) and I seem to not be able to create a database - it tells me that:
Create Database permission denied in database master - Microsoft SQL Server Error 262.
How to I enable these priviledges?
Do i need to regsiter the Server with the Enterprise Manager and how do I do that?
I've just installed SQL Server Express and attempted to create my first database and received this error message :-(
Maybe this is a long shot, but can someone tell me what I've done wrong? Do I have a bad install or what?
Essentially I followed the steps below to create the database:
1. Started MS SQL Server Management studio Express 2. Right clicked on the Database folder 3. Selected "New Database..." 4. New Database panel displayed 5. Entered name of database - pip 6. Clicked "OK" 7. Receieved error dialog with followig message:
TITLE: Microsoft SQL Server Management Studio Express ------------------------------
Create failed for Database 'pip'. (Microsoft.SqlServer.Express.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.2047.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Create+Database&LinkId=20476
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.Express.ConnectionInfo)
------------------------------
Could not obtain exclusive lock on database 'model'. Retry the operation later. CREATE DATABASE failed. Some file names listed could not be created. Check related errors. (Microsoft SQL Server, Error: 1807)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.2047&EvtSrc=MSSQLServer&EvtID=1807&LinkId=20476
I have an application which will create a SQL database(using CREATE DATABASE) and the database files are supposed to be placed in c:program filesmyAppdatamyDatabase.mdf
Hi Guys,This is my first post and I hope I'm not going to embarrass myself to much.I am currently writing a pseudo install package for SQL Server Express, it is written in VB.Net 2.0.
I have created an *.exe that fires the SQL Server Express install package silently with command line options, once complete the *.exe copies an *.MDF and an *.LDF to the newly created data directory. Once the data has been copied I fire a "CREATE DATABASE FOR ATTACH" using a SQLClient.SQLCommand to attach my DB. I am using Windows Authentication for SQL Server Express.This all works beautifully when the *.exe is being run from a local hard disk - complete success.When I move the *.exe to a CD it fails . SQL Server is installed correctly, the files are copied to the local hard disk in the correct location. I then fire the "CREATE DATABASE" command - its here I get the error.The error details are:Unable to open the physical file "c:....Exchange.LDF". Operating System error 5:"5(error not found)". Cannot create file "c:....Exchnage.ldf" because it already exists. Change the file path or file name, and retry the operation. Could not open new database 'Exchange'. CREATE DATABASE is aborted. File activation failure. The physical file name "c:....Exchange.LDF" may be incorrect.Remember this works perfectly when run from the local hard disk, this only occurs when running from a CD-ROM.Now from the research I have done I believe it may be a permissions error. The setup *.exe is being run from a Administrator account and the SQL Server DB Engine Service Account is System. I'm under the impression that this should provide more than enough permissions.
Thanks for any help you guys may be able to provide... Matt.
I am using VB with Visual Studio Express. I am new to these tools. I have SQL Server 2005 Express installed on my machine. I think that I have the right version. I am just using Express for taking classes and teaching myself on my machine. When I follow the examples in the book, I keep getting this error when I go to my ASP.NET configuration and click on the security tab to add myself as a user. "There is a problem with your selected data store. This can be caused by an invalid server name or credentials, or by insufficient permission. It can also be caused by the role manager feature not being enabled. Click the button below to be redirected to a page where you can choose a new data store. The following message may help in diagnosing the problem: The database filename can not contain the following 3 characters: [ (open square brace), ] (close square brace) and ' (single quote) " -- end of erro msg. I have an apostrophe in my last name. Could that be what is causing it? Is it creating a db based on my name or something? Or do I have the wrong version of SQL Server Express installed. Thank you for any help. I appreciate it.
Ok I am new to Sql and am wonder How I can (when createing a table ) have a field that is auto incremented.
Here is what I have so far
Code:
CREATE TABLE test (`id` INTEGER NOT NULL, `test` VARCHAR(50) NOT NULL, PRIMARY KEY (`id`)
I want the primary key id to be an incremented number.
I am used to mysql and I would just have the field created as an AUTO_INCREMENT.
Do I use the INCREMENT function within the first query or do I have to have another query that will alter the table and make the field an auto incremented number.
I searched and found similar questions on this forum, but nothing quite fits my situation. When I try to run the SQLCMD per the instructions given on the 2nd page of the Guided Tour, the command aborts with the following message. HResult 0x2, Level 16, State 1Named Pipes Provider: Could not open a connection to SQL Server [2].Sqlcmd: Error: Microsoft SQL Native Client : An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections..Sqlcmd: Error: Microsoft SQL Native Client : Login timeout expired. I had to run the command from the command prompt window by manually navigating to sqlcmd's subdirectory to see this message. Using the Run window results in the command window closing before the message can be read. I tried using both my machine name and "localhost." Same result. What is a local vs. remote connection? How could I perform this via a local connection, assuming that's the problem? Or how can SQL Express be configured to allow the remote connection? Did I do something wrong on the install?
I need to pass some SQL to someone else who will run it on their database. I have got the SQL for SQL Server 2000 but they are running SQL Server 7. Apparently the below MSSQL 2000 script doesn't work;
SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON GO CREATE TABLE [dbo].[tableName]( [id] [int] IDENTITY(1,1) NOT NULL, [ArticleID] [int] NULL, [Heading] [text] COLLATE SQL_Latin1_General_CP1_CI_AS NULL, [BodyContent] [text] COLLATE SQL_Latin1_General_CP1_CI_AS NULL, [WrittenDate] [datetime] NULL, CONSTRAINT [tableName] PRIMARY KEY CLUSTERED ( [id] ASC ) )
What is the equivalent of the above in for SQL Server 7? I don't have access to it via SQL Server Manager so have to run the script.
ALTER TRIGGER [dbo].[Trigger1] ON [dbo].[Table1] with execute as SELF AFTER INSERT
[code]....
I am trying to create a trigger so every time a entry is made on a table, and the Colum1 is 'entry', it starts a job. But the users running the inserts do not have permission to Start jobs so I need to make it run as a super user. Where do i put the syntax in here? I Have tried Execute as login 'superuser' before the exec statement but it errors on the principal not being valid
Please provide some help regarding the "Interface Defining Error: IID_IDBDataSourceAdmin" error while trying to create a SDF database using Query Analyzer on a Windows CE 5.0 mobile device (Symbol MC3000).
Error: 0x80004005 E_FAIL Native Error: 28558 Description: SQL Mobile encountered problems when creating database [,,,,]
PS. Basically I have developed a mobile application that programmatically creates the database, the code worked on a similar device (Win CE 50), trying to run the application on a new device resulted in database creation errors. I tried creating a test database manually .. and this is what I got.
Browsing MSDN or searching on the Forum did not help.
What is the equivalent for INCLUDE clause (in Create index syntax) in SQL Server 2000. SQL Server 2005 will support Include clause in Create index syntax . How to attain it in SQL Server 2000
Example : I have below query executable in SQL Server 2005
CREATE INDEX Index_Name ON mytable(col1 ASC) INCLUDE (name,id);
What is the equivalent for the above query in SQL server 2000
After detaching the database I placed the database files and log files in the D folder as C drive was full. When i try to attach the files I am getting an error Failed to attach database Microsoft SQL Error 7622 (QCFTCAT Full text catalog).
I checked there is a folder in C drive by name QCFTCAT and the C drive has no space. What does this folder means please let me know on the same.
After detaching the database I placed the database files and log files in the D folder as C drive was full. When i try to attach the files I am getting an error Failed to attach database Microsoft SQL Error 7622 (QCFTCAT Full text catalog). I checked there is a folder in C drive by name QCFTCAT and the C drive has no space. What does this folder means please let me know on the same.
I am having 100 of flat files need to load in respective staging table.I want to create table on run time as per filename input.suppose if input filename is ABC then table name should be Staging_ABC if file name is XYZ then it should be Staging_XYZ.Table structure is below need to create at run time
CREATE TABLE Staging_'Filename'( [COL001] [varchar](4000) NULL, [Id] [int] IDENTITY(1,1) NOT NULL, [LoadDate] [datetime] NOT NULL default getdate() )
i have migrated a DTS package wherein it consists of SQL task.
this has been migrated succesfully. but when i execute the package, i am getting the error with Excute SQL task which consists of Store Procedure excution.
But the SP can executed in the client server. can any body help in this regard.
Hi, all I'm getting this error at runtime when my page tries to populate a datagrid. Here's the relevant code. First, the user selects his choice from a dropdownlist, populated with a sqldatasource control on the aspx side:<asp:SqlDataSource ID="sqlDataSourceCompany" runat="server" ConnectionString="<%$ ConnectionStrings:ConnectionString %>" SelectCommand="SELECT [PayrollCompanyID], [DisplayName] FROM [rsrc_PayrollCompany] ORDER BY [DisplayName]"> </asp:SqlDataSource> And the dropdown list's code:<asp:DropDownList ID="ddlPayrollCompany" runat="server" AutoPostBack="True" DataSourceID="sqlDataSourcePayrollCompany" DataTextField="DisplayName" DataValueField="PayrollCompanyID"> </asp:DropDownList> Then, I use the selectedindexchanged event to bind the data to the datagrid. Here's that code: 1 Sub BindData() 2 3 Dim ds As New DataSet 4 Dim sda As SqlClient.SqlDataAdapter 5 Dim strSQL As String 6 Dim strCon As String 7 8 strSQL = "SELECT [SocialSecurityNumber], [Prefix], [FirstName], [LastName], [HireDate], [PayrollCostPercent], " & _ 9 "[Phone], [BadgeNumber], [IsSupervisor], [SupervisorID], [IsUser], [IsScout] FROM [rsrc_Personnel] " & _ 10 "WHERE ([PayrollCompanyID] = @PayrollCompanyID)" 11 12 strCon = "Data Source=DATASOURCE;Initial Catalog=DATABASE;User ID=USERID;Password=PASSWORD" 13 14 sda = New SqlClient.SqlDataAdapter(strSQL, strCon) 15 16 sda.SelectCommand.Parameters.Add(New SqlClient.SqlParameter("@PayrollCompanyID", Me.ddlPayrollCompany.SelectedItem.ToString())) 17 18 sda.Fill(ds, "rsrc_Personnel") 19 20 dgPersonnel.DataSource = ds.Tables("rsrc_Personnel") 21 dgPersonnel.DataBind() 22 23 End Sub 24
I'm assuming my problem lies in line 16 of the above code. I've tried SelectedItemIndex, SelectedItemValue too and get errors for those, as well. What am I missing? Thanks for anyone's help! Cappela07
Hi, I'm having an SSIS package which gives the following error when executed :
Error: 0xC002F210 at Create Linked Server, Execute SQL Task: Executing the query "exec (?)" failed with the following error: "Syntax error or access violation". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.Task failed: Create Linked Server
The package has a single Execute SQL task with the properties listed below :
General Properties Result Set : None
ConnectionType : OLEDB Connection : Connected to a Local Database (DB1) SQLSourceType : Direct Input SQL Statement : exec(?) IsQueryStorePro : False BypassPrepare : False
Parameter Mapping Properties
variableName Direction DataType ParameterName
User::AddLinkSql Input Varchar 0
'AddLinkSql' is a global variable of package scope of type string with the value Exec sp_AddLinkedServer 'Srv1','','SQLOLEDB.1',@DataSrc='localhost',@catalog ='DB1'
When I try to execute the Query task, it fails with the above error. Also, the above the sql statement cannot be parsed and gives error "The query failed to parse. Syntax or access violation"
I would like to add that the above package was migrated from DTS, where it runs without any error, eventhough it gives the same parse error message.
I would appreciate if anybody can help me out of this issue by suggeting where the problem is.
Hi All, can someone help me, i've created a stored procedure to make a report by calling it from a website. I get the message error "241: Syntax error converting datetime from character string" all the time, i tryed some converting things but nothig works, probably it is me that isn't working but i hope someone can help me. The code i use is:
CREATE proc CP_Cashbox @mID varchar,@startdate datetime,@enddate datetime as set dateformat dmy go declare @startdate as varchar declare @enddate as varchar
--print "query aan het uitvoeren"
select sum(moneyout) / sum(moneyin)*100 as cashbox from dbo.total where machineID = '@mID' and njdate between '@startdate' and '@enddate' GO
