Creating A Custom Data Source Component.
Jan 15, 2008I would like to write a custom data source component for SSIS. I was wondering if there are any tutorials / examples for this that are available.
Thanks
ADVERTISEMENT
Enable Error Handling When Writing Custom Source Component /custom Error Handling Component.
Apr 21, 20061) We are writing a custome Source component for Oracle with OCI calls, Could some one please let me know how to Enable Error Handling for the Same,
2) Is it possible to write Custome Error Handeling Component for SSIS? if yes could you please help me on how to write it.
Thanks in advance.
Query On Custom Source Component
May 10, 2006
Hi
in the acquireconnection method Using the below statment I can get a connection Object
oledbConnection = cmado.AcquireConnection(transaction) as OleDbConnection;
from the connection object I can get the connectionstring from the object by calling
oledbConnection.connectionstring() property which will have all the details like DataBase, UserName & other Inofrmation but there is no password Info.
How to get the password Information, I need that information since I will use that info to make OCI calls to fetch the data from the Oracle database in m,y custome source component.
any help is much appriciated
thanks in advance.
Custom Source Component Problem?
Mar 23, 2006Hi,I have developed a custom source component to get data from a generic odbc connection with some special caracteristics.
The component works fine by getting and mapping the output fields etc...
The only two problems existing are that when i run the task it says that the data flow has no components inside... how is this possible since i have my source mapped to a flat file inside that data flow?
This is the error:
SSIS package "BVEIT000D.dtsx" starting.
Warning: 0x80047034 at BVEIT000D_<EMPRESA> TXT, DTS.Pipeline: The DataFlow task has no components. Add components or remove the task.
Information: 0x4004300C at BVEIT000D_<EMPRESA> TXT, DTS.Pipeline: Execute phase is beginning.
SSIS package "BVEIT000D.dtsx" finished: Success.
The other problem is that if i want to <ignore> a certain source column the component already shows me an error saying that the no column with ID 0 was found...
Any one with experience in creating custom components?
Regards,
Error OutPut In Custom Source Component
May 11, 2006For the Custome source Component ErrorOutput, should I go for asynchronous / synchronous Output.
If i go for synchronous output
// Create the error output.
IDTSOutput90 errorOutput = ComponentMetaData.OutputCollection.New();
errorOutput.IsErrorOut = true;
errorOutput.Name = "ErrorOutput";
errorOutput.SynchronousInputID = What Id is required here;
errorOutput.ExclusionGroup = 1;
Is it the IDTSOutput90 InPut.ID / OutPut.ID which should be assigned.
Thanks Regards
Anil
Creating A Custom Transformation Component Walkthrough
Apr 10, 2006Microsoft published a "Creating a custom transformation component Walkthrough" published on
http://www.microsoft.com/downloads/details.aspx?FamilyID=1c2a7dd2-3ec3-4641-9407-a5a337bea7d3&DisplayLang=en
Does anyone know where to get the Hands-On Lab Files mentioned?
Thanks
Alex
Adding Error Output To Custom Source Component
Dec 6, 2007Hi all,
I saw a couple of other posts here on this topic, but none quite got to my issue.
I'm trying to add error output to a custom source component (not a script, a custom component). The samples all seem to deal with transform components, and my issues seem to be unique to source components.
I have the following code related to error handling ...
Public Overloads Overrides Sub ProvideComponentProperties()
...
Dim output As IDTSOutput90 = ComponentMetaData.OutputCollection.New
output.Name = OUTPUTCOLUMNNAME
output.ExternalMetadataColumnCollection.IsUsed = True
ComponentMetaData.UsesDispositions = True
output.ErrorRowDisposition = DTSRowDisposition.RD_NotUsed
output.ErrorOrTruncationOperation = "Something got truncated or blew up"
Dim errorOutput As IDTSOutput90 = ComponentMetaData.OutputCollection.New
errorOutput.Name = ERRORCOLUMNNAME
errorOutput.IsErrorOut = True
...
End Sub
Public Overloads Overrides Sub ReinitializeMetaData()
Dim output As IDTSOutput90 = ComponentMetaData.OutputCollection(OUTPUTCOLUMNNAME)
Dim outColumn As IDTSOutputColumn90 = output.OutputColumnCollection.New
outColumn.Name = strName
outColumn.SetDataTypeProperties(DataType.DT_I4, 0, 0, 0, 0)
Dim metadataColumn As IDTSExternalMetadataColumn90 = output.ExternalMetadataColumnCollection.New
metadataColumn.Name = outColumn.Name
metadataColumn.DataType = outColumn.DataType
metadataColumn.Precision = outColumn.Precision
metadataColumn.Length = outColumn.Length
metadataColumn.Scale = outColumn.Scale
metadataColumn.CodePage = outColumn.CodePage
outColumn.ExternalMetadataColumnID = metadataColumn.ID
outColumn.ErrorRowDisposition = DTSRowDisposition.RD_NotUsed
outColumn.ErrorOrTruncationOperation = "Something Truncated!"
outColumn.TruncationRowDisposition = DTSRowDisposition.RD_NotUsed
Dim errorOutput As IDTSOutput90 = ComponentMetaData.OutputCollection(ERRORCOLUMNNAME)
Dim errorColumn As IDTSOutputColumn90 = errorOutput.OutputColumnCollection.New
errorColumn.Name = outColumn.Name
errorColumn.SetDataTypeProperties(DataType.DT_I4, 0, 0, 0, 0)
...
End Sub
The confusions I have are:
a) the stock advanced properties editor (I haven't provided a custom one) doesn't seem to "realize" that I have an error output, so provides no method to configure. I am believing it would need to know which Output columns can have their error/truncation redirected. I'd have thought setting ErrorRowDisposition on my output column would have been enough to trigger this ??
b) since I don't have any means of configuring, not surprisingly, when I try to connect my error output, designer complains that, "Ths error output cannot receive any error rows. This occurs for several reasons: Input columns or output columns are not yet defined. Error handling is not supported by the component. Error handling is not configured for the component."
c) UsesDispoistions would seem to be appropriate only for a transform component
Thanks for reading, and appreciate any help or pointers.
Bill
Expression Editor On Custom Properties On Custom Data Flow Component
Aug 14, 2007Hi,
I've created a Custom Data Flow Component and added some Custom Properties.
I want the user to set the contents using an expression. I did some research and come up with the folowing:
Code Snippet
IDTSCustomProperty90 SourceTableProperty = ComponentMetaData.CustomPropertyCollection.New();
SourceTableProperty.ExpressionType = DTSCustomPropertyExpressionType.CPET_NOTIFY;
SourceTableProperty.Name = "SourceTable";
But it doesn't work, if I enter @[System:ackageName] in the field. It comes out "@[System:ackageName]" instead of the actual package name.
I'm also unable to find how I can tell the designer to show the Expression editor. I would like to see the elipses (...) next to my field.
Any help would be greatly appreciated!
Thank you
Expression Issue With Custom Data Flow Component And Custom Property
Apr 2, 2007Hi,
I'm trying to enable Expression for a custom property in my custom data flow component.
Here is the code I wrote to declare the custom property:
public override void ProvideComponentProperties()
{
ComponentMetaData.RuntimeConnectionCollection.RemoveAll();
RemoveAllInputsOutputsAndCustomProperties();
IDTSCustomProperty90 prop = ComponentMetaData.CustomPropertyCollection.New();
prop.Name = "MyProperty";
prop.Description = "My property description";
prop.Value = string.Empty;
prop.ExpressionType = DTSCustomPropertyExpressionType.CPET_NOTIFY;
...
}
In design mode, I can assign an expression to my custom property, but it get evaluated in design mode and not in runtime
Here is my expression (a file name based on a date contained in a user variable):
"DB" + (DT_WSTR, 4)YEAR( @[User::varCurrentDate] ) + RIGHT( "0" + (DT_WSTR, 2)MONTH( @[User::varCurrentDate] ), 2 ) + "\" + (DT_WSTR, 4)YEAR( @[User::varCurrentDate] ) + RIGHT( "0" + (DT_WSTR, 2)MONTH( @[User::varCurrentDate] ), 2 ) + ".VER"
@[User::varCurrentDate] is a DateTime variable and is assign to 0 at design time
So the expression is evaluated as: "DB189912189912.VER".
My package contains 2 data flow.
At runtime,
The first one is responsible to set a valid date in @[User::varCurrentDate] variable. (the date is 2007-01-15)
The second one contains my custom data flow component with my custom property that was set to an expression at design time
When my component get executed, my custom property value is still "DB189912189912.VER" and I expected "DB200701200701.VER"
Any idea ?
Enabling Expression Builder For Custom SSIS DataFlow Source Component
Mar 13, 2007Hi,
I have implemented a custom source component that can be used as the data source in the Data Flow task.
I have also created a custom UI for this component by using the IDtsComponentUI .
But my component does not have the capability of setting the custom properties via the DTS Variables using the Expression Builder.
I have looked around for samples on how to do this, but I can only find samples of how to do this for custom Control Tasks, i.e. IDtsTaskUI.
My question is, How can implement the Expression Builder in my custom Source component + custom Source UI. Or do you know of any samples which I can look at.
Thank you,
Jameel.
Integration Services :: Custom Source Component - No Datatype Set When User Add Output Column
Aug 17, 2015I'm writing a custom source component that reads data from a SharePoint list with dynamic mapping to output columns. It's my first custom component and it's based on several samples and tutorials from Internet
Output columns are not created by the component itself, they must be added by user at design time. The component makes dynamically an association between SharePoint fields and available output columns at run-time (based on an mapping table).
I made a very basic skeleton and I encounter a problem when I add a column to output: it has no datatype and when I try to set one I have an the error Property value is not valid, The component xxxxxx does not allow setting output column datatype properties.
Imports System
Imports Microsoft.SqlServer.Dts.Pipeline
Imports Microsoft.SqlServer.Dts.Pipeline.Wrapper
Imports Microsoft.SqlServer.Dts.Runtime.Wrapper
<DtsPipelineComponent(ComponentType:=ComponentType.SourceAdapter,
DisplayName:="SharePoint Dynamic Assoc List Source",
[Code] ....
Programmatically Creating Source Script Component
Sep 7, 2007Does anyone know how to create a Source Script Component programmatically. I can only seem to create a Transformation Script Component. I have this:
PipeLineWrapper.IDTSComponentMetaData90 sourceComponent =
((dataflowTask as TaskHost).InnerObject as PipeLineWrapper.MainPipe).ComponentMetaDataCollection.New();
sourceComponent.ComponentClassID = app.PipelineComponentInfos["Script Component"].CreationName;
Is there anything I have to do extra to make it a source script component, seeing how it defaults to a transformation.
The Component Metadata For Component DataReader Source (1113) Could Not Be Upgraded To The Newer Version Of The Component.
Oct 26, 2007Hello,
I have a package that has a data lfow task. this task imports data from a db2 database (using the IBM Ole DB provider fro db2) and adds it to sql server database table. This package was created on the server. then though version control (using TFS source control) I check out the package on my local machine. and when I open the package I get the foll 3 errors.
Error 1 Validation error. Import Account Num from BMGP_BDR: DTS.Pipeline: The component metadata for "component "DataReader Source" (1113)" could not be upgraded to the newer version of the component. The PerformUpgrade method failed.
Error 2 Error loading BMAG Download Xref Tables - bmag.dtsx: Microsoft.SqlServer.Dts.Pipeline.ComponentVersionMismatchException: The version of component "DataReader Source" (1113) is not compatible with this version of the DataFlow. [[The version or pipeline version or both for the specified component is higher than the current version. This package was probably created on a new version of DTS or the component than is installed on the current PC.]] at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostCheckAndPerformUpgrade(IDTSManagedComponentWrapper90 wrapper, Int32 lPipelineVersion)
Error 3 Error loading BMAG Download Xref Tables - bmag.dtsx: The component metadata for "component "DataReader Source" (1113)" could not be upgraded to the newer version of the component. The PerformUpgrade method failed.
Please advice.
Thank you.
The Component Metadata For Component DataReader Source Could Not Be Upgraded To The Newer Version Of The Component.
Jan 23, 2007Hi,
I have a package which reads an Access file from a folder. My connection manager to this file is .NET providers for OledbMicrosoft Jet 4.0 OLE DB Provider.
Package works from my computer. But when I execute it on the server as a SQL Agent job, I get
The component metadata for "component "DataReader Source" (1) could not be upgraded to the newer version of the component. The PerformUpgrade method failed.
I copied the mdb file to a folder on the server which my packages have no problem reading data from.
My packages run under the same domain account as defined in proxies.
Appreciate a help.
Gulden
Saving Packages And Custom Component Data
Mar 14, 2007I am looking for some advice regarding saving custom component data when saving packages.
For custom "properties", this is not an issue, as saving the package will save these properties. Howver, I also have information for each column (besides the properties that columns provides, like Name and DataType) that I need to save if a package were to be saved, and right now it does not save because I am using my own objects to store the data.
I am wondering as to how I can save this information. I have looked up on serialization, but I would like to know if there is another way besides serialization to save this inforamtion as I'd rather not save this to a seperate file.
Thanks
Amo And Creating Data Source And Data Source View Code
Feb 2, 2008,
Hi
In this code how can I create a new data source and new data source view and model and structure that it run dynamic.
In this code I have a lot of errors, that they are about server and database don€™t have in current code,
In this code, first I should definition server or no?
Database dbNew = new Database (databaseName,
Utils.GetSyntacticallyValidID(databaseName, typeof(Database)));
srv.Databases.Add(dbNew);
dbNew.Update(true);
***********************************************************
How can I create data source and data source view and model and structure?
Please say code of that, and guide me.
databasename and srv is unknown.
Do I add other reference with analysis services?
Please explain about these codes:
************************************************************************
1)
RelationalDataSource dsNew = new RelationalDataSource(
datasourceName,
Utils.GetSyntacticallyValidID(
datasourceName,
typeof(RelationalDataSource)));
db.DataSources.Add(dsNew);
dsNew.ConnectionString = connectionString;
dsNew.Update();
2)
RelationalDataSourceView rdsv;
rdsv = db.DataSourceViews.Add(
datasourceviewName,
Utils.GetSyntacticallyValidID(
datasourceviewName,
typeof(RelationalDataSourceView)));
rdsv.DataSourceID = ds.ID
***************************************************************
3)
OleDbConnection cn = new OleDbConnection(ds.ConnectionString);
OleDbCommand cmd = new OleDbCommand(
"SELECT * FROM [" + tableName + "] WHERE 0=1", cn);
OleDbDataAdapter ad = new OleDbDataAdapter(cmd);
DataSet dss = new DataSet();
ad.FillSchema(dss, SchemaType.Source);
*************************************************************
4)
// Make sure we have the name we thought
dss.Tables[0].TableName = tableName;
// Clone here - the original DataTable already belongs to a DataSet
rdsv.Schema.Tables.Add(dss.Tables[tableName].Clone());
rdsv.Update();
5)
MiningStructure ms = db.MiningStructures.Add(miningstructureName, Utils.GetSyntacticallyValidID(miningstructureName,
typeof(MiningStructure)));
ms.Source = new DataSourceViewBinding(dsv.ID);
ms.CaseTableName = "Customer";
Add columns:
ScalarMiningStructureColumn smsc;
// From table "Customer" we will add a couple of columns
// CustomerID - key
smsc = new ScalarMiningStructureColumn("Customer ID",
Utils.GetSyntacticallyValidID("Customer ID", typeof(ScalarMiningStructureColumn)));
smsc.IsKey = true;
smsc.Content = "Key";
smsc.KeyColumns.Add("Customer", "customer_id", OleDbType.Integer);
ms.Columns.Add(smsc);
*******************************************
6)
MiningModel mm = ms.MiningModels.Add(miningmodelName,
Utils.GetSyntacticallyValidID(miningmodelName,
typeof(MiningModel)));
mm.Algorithm = "Microsoft_Decision_Trees";
mm.Parameters.Add("COMPLEXITY_PENALTY", 0.3);
MiningModelColumn mc = new MiningModelColumn("Customer ID",
Utils.GetSyntacticallyValidID("CustomerID",
typeof(MiningModelColumn)));
mc.SourceColumnID = ms.Columns["Customer ID"].ID;
mc.Usage = "Key";
mm.Columns.Add(mc);
mm.Update();
Please exactly say, whatever I want
Thanks a lot for your answer
Please don€™t move this question because I don€™t know where I should write this.
Performance Issue With Custom Data Destination Component
Feb 12, 2008Hi,
All the examples I've seen for creating custom data destinations (scripts or components) show that in the ProcessInput method you need to iterate through each record and execute a commit for each row. Here's a sample from http://forums.microsoft.com/msdn/showpost.aspx?siteid=1&postid=70469
Public Overrides Sub MyAddressInput_ProcessInputRow(ByVal Row As MyAddressInputBuffer)
With sqlCmd
.Parameters("@addressid").Value = Row.AddressID
.Parameters("@city").Value = Row.City
.ExecuteNonQuery()
End With
End Sub
This works for me but is extremely slow when processing lots of rows. Has anyone come across a better/faster example for committing rows to a database when creating a custom data destination component? I was thinking about using the ADO.NET batch update. Any thoughts on this or other approaches?
Thanks,
Mike Fulkerson
Custom Data Flow Component Column Mapping Question
Feb 7, 2007Hi,
I'm having my first go at developing a destination adapter which will send data to an update Web Service.
I've got some rather big gaps in my understanding. I've been following the various samples I've found on the net and have validated my mapping and picked up all the available column names and datatypes which are appearing in the Input and Output Properties tab of the Advanced Editor but I only have a tab for "Input Columns" and not "Column Mappings".
Which method defines the availble columns for the user to map?
Let me know if I haven't given enough information.
cheers
A Custom Component For Use As A VIEW In SSIS- Is It Possible To Create One MERGE Like Component With More Than 2 Inputs
Aug 13, 2007Hi all
I'm into a project which uses a lot of views for joining 2 or more tables. Using the MERGE component in SSIS will be a huge effort coz it only has 2 inputs and I gotta SORT the input too.
Isnt it possible to have a VIEW like component that joins more than 2 tables and DOESNT need sorting??
(I've thought about creating views in database engine but it breaks my data floe in SSIS and is'nt a practical solution)
SSIS Custom Data Flow Component - Variable Type Converter
Jun 27, 2007Hi all,
I am creating a customer data flow component for SSIS for use in a package. I've got some custom properties that I am exposing using the supplied advanced editor (no custom property editor here).
Some of my properties are enumerated types, and I have deciphered how to get those properties to show as dropdown lists of their respective enumerations. (For those of you who may be looking as hard as I did as to how to accomplish this, see the end of this post.)
I also have a few properties which request SSIS package variable names - such as an file name variable. However, I can't figure out how to tell the advanced editor that the property is looking for an SSIS variable, so that it can show a dropdown list of package variables, much like virtually any other Microsoft supplied Data Flow component can.
Is there a Type Converter I could specify for those custom properties? Is there another way to instruct SSIS that my custom property is expecting a variable? Or do I need to code a custom UI for editing my Data Flow Task?
To create a dropdown list of values for a custom property that represents an enum, do the following:
1. Create your enum definition, such as "public enum ThisIsMyEnum { one, two }"
2. Create a new class that inherits from TypeConverter, such as "public class MyEnumConverter : TypeConverter"
3. Override "CanConvertFrom", and return true if "sourceType == typeof(string)"
4. Override "CanConvertTo", and return true if "destinationType == typeof(string)"
5. Override "ConvertFrom", and return the enum value (such as "one" or "two" in my example) that corresponds to the string passed in the parameter "value"
6. Override "ConvertTo", and return a string that corresponds to the enum value passed in the parameter "value"
7. Override "GetStandardValuesSupported" and return true
8. Override "GetStandarValuesExclusive" and return true to indicate that ONLY the enum values should be accepted
9. Override "GetStandardValues", and return a new StandardValuesCollection constructed with Enum.GetValues() of your enum, such as "return new StandardValuesCollection(Enum.GetValues(typeof(ThisIsMyEnum)));"
10. Just above your "public enum" declaration, add a "TypeConverter" attribute to link your type converter to your enum, such as "[TypeConverter(typeof(MyEnumConverter))]"
11. In "ProvideComponentProperties", after you've created your custom property like this: "IDTSCustomProperty90 propEnum = ComponentMetaData.CustomPropertyCollection.New()", add another line to specify the TypeConverter property of the property to the full assembly name of your type converter, like so: "propEnum.TypeConverter = typeof(MyEnumConverter).AssemblyQualifiedName;"
Reference To Preceeding Component From Custom Dataflow Transformation Component
Mar 30, 2006I am writing a custom dataflow transformation component and I need to get the name of the preceeding component.
I have been trying to find a way to get a reference to the Package object, MainPipe object or IDTSPath90 object (connecting to the IDTSInput90 of my component) from my component because I think from there I can get to the information I want.
Does anyone have any suggestions?
TIA . . . Ed
Data Flow Source Script Component
Dec 3, 2007I'm wondering if it is possible to create a flat file source on the fly while bypassing the following step:
On the Connection Managers page, add or create the Flat File connection manager, using a descriptive name such as MyFlatFileSrcConnectionManager. Then close the Script Transformation Editor.
I want to create the connection totally in script, yet i'm having a hard time proving this out...does anybody have any
experience with this?
Ryan
SSIS Data Flow Source Component To 'read' A PDF File
Feb 13, 2008At our business we are getting a lot of PDF documents that are being hand keyed into a database. Has anyone heard ior know of a SSIS Data Flow Source component that I coud use to read thos documents into a data stream (?) and process?
View 5 Replies View RelatedHelp! Creating Custom Data Flow Task
May 19, 2007I'm trying to create a custom data flow destination, and it has a custom property that needs to get value from variable(similar to the FileNameVariable property of Raw File Destination), how can I do that?
View 5 Replies View RelatedAdding Custom Property To Custom Component
Aug 17, 2005What I want to accomplish is that at design time the designer can enter a value for some custom property on my custom task and that this value is accessed at executing time.
View 10 Replies View RelatedReuse Existing Data Flow Components In A Custom Data Flow Component
Aug 29, 2007Hello,
Is it possible to use existing data flow components (Merge Join, aggregation,...) in a custom data flow component?
Thanks,
Yoann
Script Component As Source: The Value Is Too Large To Fit In The Column Data Area Of The Buffer.
Jan 17, 2008In my quest to get the Script Component as Source to work, I've come upon an error that says "The value is too large to fit in the column data area of the buffer.". Of course, I went through the futile attempt to get debugging to work. After struggling and more searching, I found that I need to run Dts.Events.FireProgress to debug in a Script Component. However, despite the fact that the script says:
Code Block
Imports Microsoft.SqlServer.Dts.Pipeline.Wrapper
Imports Microsoft.SqlServer.Dts.Runtime.Wrapper
Imports Microsoft.SqlServer.Dts.Runtime
...
Dts.Events.FireProgress..
I get a new error saying: Error 30451: Name 'Dts' is not declared. Its like I am using the wrong namespace, but all documentation indicates that Microsoft.SqlServer.Dts.Pipeline.Wrapper is the correct namespace. I understand that I can use System.Windows.Form.MessageBox.Show, but iterating through 100 items makes this too cumbersome. Any idea what I may be missing now?
Thanks,
John T
Integration Services :: Source Script Component To Read Data From Sharepoint List?
Apr 29, 2015All examples I found refer to classes under Microsoft.SharePoint namespace. However, I have the SharePoint CSOM that only gives me the Microsoft.Sharepoint.Client namespace.
I need to read the selected values of a multichoice field, but not sure how to do it with classes in the namespace above.
everthing works, exept the TSQL_x0020_Reference_x0020_Numbe field.
my code looks like this:
Webweb = cont.Web;
cont.Load(web);
cont.ExecuteQuery();
Listsstest = web.Lists.GetByTitle("T-SQL
Code Review Tracking");
//CamlQuery query = CamlQuery.CreateAllItemsQuery();
[code]....
Can I Access My Data Source In Custom Report Item During Design Mode?
Mar 19, 2007Hi,
I'm developing a Custom Report Item and would like to fill my properties dialog in design mode with real data. I have the name of the data source and the command text for the corresponding report dataset, read from the report design.
Is it possible to create an ado.net dataset so that I can display and use real data in my properties dialog box? First problem I have is to get the connection string from the data source string. I found no docs for that, especially the Microsoft.ReportingServices.DataExtensions.ReportDataSource class is not documented. Am I on the right way with that?
Thomas
SSIS Execution Error: The Product Level Is Insufficient For Component Data Reader Source
Jun 5, 2007Hi all, while executing my ssis package Im getting this error
" the product level is insufficient for component "data reader source" "
but through the bussiness intelligence while debugging it was executing successfully,
but only after deploying the package on to the IS server, while executing getting this error
I checked with the server version also, its was with service pack 2
can I get any help
thanks in advance
How To Retrieve Connections Collection Inside Custom Data Flow Tasks (source/destination)
May 16, 2008Hi,
How do I retrieve the connections (connection managers) collections from Custom Data Flow destination? ComponentMetadata.RuntimeConnectionCollection is empty. I would like to be able to access all the connections defined in the package from the custom data flow task.
I came across code in which it was possible to access the Connections collection using the IDtsConnectionService for custom task (destination). The custom task has access to serviceProvider, whcih can be used to get access to the IDtsConnectionService interface but not the custom data flow task.
Any help appreciated.
Thanks
Naveen
Dynamically Creating The Data Source Of A Report At Run Time Using Parameters
Feb 13, 2008
I have three databases which have the identical data structure. When the user runs a report, he has to select a database.
For example, my report query would look like:
Select * from <theDatabase>.dbo.MyTable
How could I assign the value of <theDatabase> at run time depending on what the user selects from the list?
In my datasource, I have only specified the server name and no value for initial catalog.
Connection Failed Error Creating Data Source For Server
Mar 1, 2008Hopefully there's an easy answer for this. I'm totally new to SQL server and I'm trying to upsize an Access database. Whether I use the upsizing wizard or try to create a data source through the ODBC Data Source Administrator, I get a connection failed error. It tells me the server does not exist or my login is incorrect. I'm using NT authentication to connect to the server on my local drive. I just installed the whole 2005 express edition and the only thing that came up during the install was that I didn't have IIS installed. I didn't see how that would be relevant, so I went ahead with the install.
Shouldn't this work with the default setup? I've searched around trying different "solutions" although I doubt they were specifically related to this very basic problem. I tried giving my login every right I could find through in the database engine properties in the server management studio, which connects fine itself with just my network login name and no password. What am I missing?