Creating And Saving A Stored Procedure In SQL Server 2005. Help !!!!!!!
Mar 4, 2007
I have in the past created stored procedures using SQL Server 2000. It was easy to do. Now I am using SQL Server 2005 and the whole process is different and confusing to me. I performed the following steps to create a stored procedure:
1.) In SQL Server management studio, I wen to the folder named "Stored Procedures"
2.) I right clicked on this folder and selected "New Stored Procedure..."
3.) A generic sql server stored procedure is created for me.
4.) I modify the stored procedure and now want to save it?
Now where do I go from here? How should I properly save this new stored procedure and where should I save it?
I noticed that a generic name is assigned such as SQLQuery13.sql, but I want to name it something else.
I actually saved the new stored procedure but I can't see it listed under the "Stored Procedures" folder. I even tried
doing a refresh.
View 6 Replies
ADVERTISEMENT
Jan 21, 2006
Could somebody tell me how do we create a .NET Stored Procedure in Sql Server 2005 Express Edition and deploy and debug it against the database from Visual Studio 2005 or Visual Web Developer? Can some one also let me know which approach is faster among .NET stored procedure or T-SQL stored procedure?
Regards...
Shashi Kumar Nagulakonda.
View 1 Replies
View Related
Jul 13, 2007
Hi,
web searches give no end of how extended stored procedures can only be written in C++ ( or maybe vb also) .
And that extended stored procedures should be abandonded in favour of CLR framework procedures.
And how most articles explain how to convert ESPs to CLR procedures!!!!!
But I need to pass a non-discript block of binary data, extract pieces of data identified by its offset into the block, data type inferred by offset; into data to be written to the SQL database. These offsets are determinede by mapping (C UNION) to C typedef structures.
This cannot be done by managed code, therefore cannot be done by C++ CLR.
It is also ill suited for C# .
Sounds like a job for C++ extended stored procedure.
But how does one create and deploy an ESP with Visual Studio 2005? All wizards seem to insist on CLR.
Help!?
Boyd
View 2 Replies
View Related
May 7, 2008
Hi,
I've a large number of stored procedures that output result sets, as part of a test script it would be useful for me to be able to save the results from these stored procedures into temporary tables, without having to pre-create these tables, i.e. use the equivalent of a select * into statement.
Is this possible ?
Sean
View 2 Replies
View Related
Jun 13, 2007
I have had the same problem. In the past I had the sql commands in the code. Last project was with SQL2000 and I decided to add store procedures part as a learning tool and part to better control the code. With the current project I am using SQL2005 and have a ummm fun time with the learning curve.
Below is my stored procedure.
USE [AdventureWorks]
GO
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER Procedure [dbo].[WDR_CountryAdd]
(
@CountryName nvarchar(50),
@CountryID int OUTPUT
)
AS
INSERT INTO Country
(
CountryName
)
VALUES
(
@CountryName
)
SELECT
@CountryID = @@Identity
When I hit the execute button, I get the following error.
Msg 208, Level 16, State 6, Procedure WDR_CountryAdd, Line 24
Invalid object name 'WDR_CountryAdd'.
I I know that it does not exist as that is what I am trying to do, create it. I have checked to make sure that I am on the currect database. So how do I associate this procedure with the data base? Do I need to write a SQL query to create the procedure? Maybe that is the answer and then just modify it.
View 5 Replies
View Related
May 23, 2007
Hello everyone I have a stored procedure that I am trying to save datetime data to at the moment I can create a string that will output 25/05/2007 18:30 Does anyone know the best way to get this into the correct format for my SP parameter
cmdPublish.Parameters.Add(new SqlParameter("@datPublishDate", System.Data.SqlDbType.DateTime));
cmdPublish.Parameters["@datPublishDate"].Value = ????
Thanks
View 3 Replies
View Related
Jan 23, 2008
I need to create a stored procedure that will have about 10-15 queries and take 3 parameters.
the variables will be: @lastmonth, @curryear and @id
@lastmonth should inherit Session variable intlastmonth
@curryear should inherit Session variable intCurrYear
@id should inherit Session id
One example query is SELECT hours FROM table WHERE MONTH ='" + Session("intLastmonth") + "' AND YEAR ='" + Session("intCurrYear") + "' AND [NUMBER] = '" + Session("id")
The rest of the queries will be similar and use all 3 variables as well.
How can I go about this and how will queries be seperated.
View 2 Replies
View Related
Feb 25, 2008
I have a table that has 5 values that I want to MSSQL to create a csv file for. After it is created, dump that csv file back into the database as a binary file. Is this possible?
View 1 Replies
View Related
Aug 15, 2007
Running [dbo].[insertlogin] ( @log = hiten, @pas = hiten ).A .NET Framework error occurred during execution of user-defined routine or aggregate "insertlogin": System.Data.SqlClient.SqlException: Must declare the scalar variable "@Log".System.Data.SqlClient.SqlException: at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.SqlInternalConnectionSmi.EventSink.ProcessMessagesAndThrow(Boolean ignoreNonFatalMessages) at Microsoft.SqlServer.Server.SmiEventSink_Default.ProcessMessagesAndThrow(Boolean ignoreNonFatalMessages) at System.Data.SqlClient.SqlCommand.RunExecuteNonQuerySmi(Boolean sendToPipe) at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe) at System.Data.SqlClient.SqlCommand.ExecuteNonQuery() at SqlServerProject1.StoredProcedures.insertlogin(SqlString log, SqlString pas).No rows affected.(0 row(s) returned)@RETURN_VALUE = Finished running [dbo].[insertlogin]. ***************************************************************all i am trying to do is : creating a SP in VS using managed code and then trying to execute it. But every time i get the above error. If you can tell me how to edit connection string in this that would be very helpful. At present i am using : Using conn As New SqlConnection("context connection=true") I tried to do "" ALTER ASSEMBLY SqlServerProject1 WITH PERMISSION_SET=EXTERNAL_ACCESS""but i get this error "" Msg 10327, Level 14, State 1, Line 1ALTER ASSEMBLY for assembly 'SqlServerProject1' failed because assembly 'SqlServerProject1' is not authorized for PERMISSION_SET = EXTERNAL_ACCESS. The assembly is authorized when either of the following is true: the database owner (DBO) has EXTERNAL ACCESS ASSEMBLY permission and the database has the TRUSTWORTHY database property on; or the assembly is signed with a certificate or an asymmetric key that has a corresponding login with EXTERNAL ACCESS ASSEMBLY permission. If you have restored or attached this database, make sure the database owner is mapped to the correct login on this server. If not, use sp_changedbowner to fix the problem.""" *********************************************************************Plz help
View 13 Replies
View Related
Jan 15, 2008
I have a problem regarding forwarding 'n number of parameters' from Visual Studio 2005 using VB to SQL-Server 2005 stored procedure.I have to save N number of rows in my stored procedure as a transaction. If all rows are not saved successfully, I have to roll-back else update some other table also after that. I am unable to handle - How to send variable number of parameters from Visual Stduio to Sql - Server ? My requirement is to use the SQL-Stored Procedure to store all the rows in the base table and related tables and then update one another table based on the updations done. Please Help .....
View 1 Replies
View Related
Mar 3, 2008
Hi all,
I have 2 sets of sql code in my SQL Server Management Stidio Express (SSMSE):
(1) /////--spTopSixAnalytes.sql--///
USE ssmsExpressDB
GO
CREATE Procedure [dbo].[spTopSixAnalytes]
AS
SET ROWCOUNT 6
SELECT Labtests.Result AS TopSixAnalytes, LabTests.Unit, LabTests.AnalyteName
FROM LabTests
ORDER BY LabTests.Result DESC
GO
(2) /////--spTopSixAnalytesEXEC.sql--//////////////
USE ssmsExpressDB
GO
EXEC spTopSixAnalytes
GO
I executed them and got the following results in SSMSE:
TopSixAnalytes Unit AnalyteName
1 222.10 ug/Kg Acetone
2 220.30 ug/Kg Acetone
3 211.90 ug/Kg Acetone
4 140.30 ug/L Acetone
5 120.70 ug/L Acetone
6 90.70 ug/L Acetone
/////////////////////////////////////////////////////////////////////////////////////////////
Now, I try to use this Stored Procedure in my ADO.NET-VB 2005 Express programming:
//////////////////--spTopSixAnalytes.vb--///////////
Public Class Form1
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim sqlConnection As SqlConnection = New SqlConnection("Data Source = .SQLEXPRESS; Integrated Security = SSPI; Initial Catalog = ssmsExpressDB;")
Dim sqlDataAdapter As SqlDataAdapter = New SqlDataAdaptor("[spTopSixAnalytes]", sqlConnection)
sqlDataAdapter.SelectCommand.Command.Type = CommandType.StoredProcedure
'Pass the name of the DataSet through the overloaded contructor
'of the DataSet class.
Dim dataSet As DataSet ("ssmsExpressDB")
sqlConnection.Open()
sqlDataAdapter.Fill(DataSet)
sqlConnection.Close()
End Sub
End Class
///////////////////////////////////////////////////////////////////////////////////////////
I executed the above code and I got the following 4 errors:
Error #1: Type 'SqlConnection' is not defined (in Form1.vb)
Error #2: Type 'SqlDataAdapter' is not defined (in Form1.vb)
Error #3: Array bounds cannot appear in type specifiers (in Form1.vb)
Error #4: 'DataSet' is not a type and cannot be used as an expression (in Form1)
Please help and advise.
Thanks in advance,
Scott Chang
More Information for you to know:
I have the "ssmsExpressDB" database in the Database Expolorer of VB 2005 Express. But I do not know how to get the SqlConnection and the SqlDataAdapter into the Form1. I do not know how to get the Fill Method implemented properly.
I try to learn "Working with SELECT Statement in a Stored Procedure" for printing the 6 rows that are selected - they are not parameterized.
View 11 Replies
View Related
Oct 13, 2006
Is it possible to create a stored procedure that execute a delete command from a table whose name is specified as a parameter of the stored procedure?Thank you
View 3 Replies
View Related
Apr 3, 2007
ALTER PROCEDURE companyinsert@companyid INT IDENTITY(1,1) NOT NULL,@companyname varchar(20),@address1 varchar(30)ASINSERT INTO companymaster ( companyname, address1)VALUES (@companyname,@address1)i don't want the companyname having the same names are recorded again with the different company id..Can anyone help me and modify my code according it's giving error...in the @companyid.It is being done in sql server 2005 with asp.net C# 2005
View 1 Replies
View Related
May 6, 2007
I have some script for creating the table i want but i need some help creating a Stored Procedure. That will Insert the UserId from the aspnet_Users Table (UserId) into the UserId Column in my table. So when a user creates an account it will put that users id into my table. The data will be retrieved by a FormView and the user can Update their info threw the FormView control..
I just need to associate the UserId from the aspnet_User Table with my table, so the data is stored per UserId in a new row for each new user..create table dbo.custom_Profile (
UserId uniqueidentifier not null Primary Key,
IamWeAre nvarchar(50) null,
InterestedIn nvarchar(256) null,
IntroTitle nvarchar(100) null,
TellOthers nvarchar(MAX)null,
MaritalStatus nvarchar(20) null,
BodyType nvarchar(50) null,
Race nvarchar(20) null,
Smoking nvarchar(20) null,
Drinking nvarchar(20) null,
Drugs nvarchar(20) null,
Education nvarchar(256) null)
go
View 15 Replies
View Related
Mar 16, 2008
I have a table (displayed in a gridview) of services we provide. I have another table (the logfile) that displays the current status of those services. This GridView displays the service and current status.When a new service is created there is obviously no status yet. This causes a problem because my stored procedure (below) does not display that new service in my GridView. How can I ensure EVERY service is included in my dataset regardless of whether or there is a status? (and how can I get away from having to group by all the time?)
select s.servicename, s.opr, c.commentid,c.comment, c.etic, t.statusfrom svc_service sinner join svc_comment c on c.serviceid = s.serviceidinner join svc_status t on t.statusid = c.statusidgroup by s.servicename, s.opr, c.commentid, c.comment, c.etic, t.status
TIA,
Jon
View 4 Replies
View Related
Jul 8, 2004
I have an inline sql query which i want to convert to a stored procedure.
The query is simplified as follows:
string sql = "SELECT * FROM property_property WHERE Location = " + location;
if(state != null) sql += " AND State = " + state;
if(cost !=null) sql += " AND Cost = " + cost;
The query is created depending on variable states; there are 7 in the real one which together creates the required query to query the database. Im not sure how/if it can be converted in to a stored proc
I know some of the basics and managed to convert every other query except this.
Any help would be appreciated
View 3 Replies
View Related
Dec 4, 2005
I already know how you create a stored procedure to add information to a database or retrieve a value for one record. But I don't know how to create a stored procedure that will retrieve many records for a certain querystring value.
Here's my simple stored procedure to show one record:
CREATE PROCEDURE DisplayCity(@CityID int)AS
SELECT City From City where CityID = @CityIDGO
My code for displaying the City:
Sub ShowCity()
Dim strConnect As String
Dim objConnect As SqlConnection
Dim objCommand As New SqlCommand
Dim strCityID As String
Dim City As String
'Get connection string from Web.Config
strConnect = ConfigurationSettings.AppSettings("ConnectionString")
objConnect = New SqlConnection(strConnect)
objConnect.Open()
'Get incoming City ID
strCityID = request.params("CityID")
objCommand.Connection = objConnect
objCommand.CommandType = CommandType.StoredProcedure
objCommand.CommandText = "DisplayCity"
objCommand.Parameters.Add("@CityID", CInt(strCityID))
'Display SubCategory
City = "" & objcommand.ExecuteScalar().ToString()
lblCity.Text = City
lblChosenCity.Text = City
objConnect.Close()
End Sub
Here's the code I'd like to get help with changing into a stored procedure:
Sub BindDataList()
Dim strConnect As String
Dim objConnect As New System.Data.SqlClient.SQLConnection
Dim objCommand As New System.Data.SqlClient.SQLCommand
Dim strSQL As String
Dim dtaAdvertiser As New System.Data.SqlClient.SQLDataAdapter()
Dim dtsAdvertiser As New DataSet()
Dim strCatID As String
Dim strCityID As String
Dim SubCategory As String
Dim SubCategoryID As String
Dim BusinessName As String
Dim City As String
'Get connection string from Web.Config
strConnect = ConfigurationSettings.AppSettings("ConnectionString")
objConnect = New System.Data.SqlClient.SQLConnection(strConnect)
objConnect.Open()
'Get incoming querystring values
strCatID = request.params("CatID")
strCityID = request.params("CityID")
'Start SQL statement
strSQL = "select * from Advertiser,AdvertiserSubCategory, Categories, SubCategories, County, City"
strSQL = strSQL & " where Advertiser.CategoryID=Categories.CategoryID"
strSQL = strSQL & " and Advertiser.AdvertiserID=AdvertiserSubCategory.AdvertiserID"
strSQL = strSQL & " and AdvertiserSubCategory.SubCategoryID=SubCategories.SubCategoryID"
strSQL = strSQL & " and Advertiser.CountyID=County.CountyID"
strSQL = strSQL & " and Advertiser.CityID=City.CityID"
strSQL = strSQL & " and AdvertiserSubCategory.SubCategoryID = '" & strCatID & "'"
strSQL = strSQL & " and Advertiser.CityID = '" & strCityID & "'"
strSQL = strSQL & " and Approve=1"
strSQL = strSQL & " Order By ListingType, BusinessName,City"
'Set the Command Object properties
objCommand.Connection = objConnect
objCommand.CommandType = CommandType.Text
objCommand.CommandText = strSQL
'Create a new DataAdapter object
dtaAdvertiser.SelectCommand = objCommand
'Get the data from the database and
'put it into a DataTable object named dttAdvertiser in the DataSet object
dtaAdvertiser.Fill(dtsAdvertiser, "dttAdvertiser")
'If no records were found in the category,
'display that message and don't bind the DataGrid
if dtsAdvertiser.Tables("dttAdvertiser").Rows.Count = 0 then
lblNoItemsFound.Visible = True
lblNoItemsFound.Text = "Sorry, no listings were found!"
else
'Set the DataSource property of the DataGrid
dtlAdvertiser.DataSource = dtsAdvertiser
'Set module level variable for page title display
BusinessName = dtsAdvertiser.Tables(0).Rows(0).Item("BusinessName")
SubCategory = dtsAdvertiser.Tables(0).Rows(0).Item("SubCategory")
SubCategoryID = dtsAdvertiser.Tables(0).Rows(0).Item("SubCategoryID")
City = dtsAdvertiser.Tables(0).Rows(0).Item("City")
'Bind all the controls on the page
dtlAdvertiser.DataBind()
end if
objCommand.ExecuteNonQuery()
'this is the way to close commands
objCommand.Connection.Close()
objConnect.Close()
End Sub
View 4 Replies
View Related
Jun 19, 2000
How can I create a Stored Procedure name within stored procedure ?
Example:
CREATE PROCEDURE A_1000
AS
..............
..............
..............
create procedure B_2000
..............
..............
..............
Is that possible ?
I'm trying to create a SP within the SP.
Thankx for ur time
Thankx a lot
View 1 Replies
View Related
Jun 11, 2007
I need to add up the number of people who joined this month and compare that number to the number of people who joined last month and display the results in a report and I have never done a stored procedure and I was wondering if it would be ease to do?
FirstName..LastName.....StartedDate
Randy......Simpson......5/4/2007 10:00:00 PM
Steve......Rowe.........5/2/2007 10:00:00 PM
Eric.......Dickerson....5/4/2007 10:00:00 PM
Gloria.....Sanches......5/1/2007 12:00:29 AM
Andres.....Marcelino....5/1/2007 12:06:31 AM
katie......ryan.........6/4/2007 12:08:35 AM
Denise.....River........6/4/2007 12:27:14 AM
Kellog.....Stover.......6/5/2007 12:37:20 AM
Glenn......Sanders......6/1/2007 12:42:40 AM
View 3 Replies
View Related
Jul 20, 2005
Im trying to create a stored procedure that selects everything from afunction name that im passing in through a parameter..create procedure SP_selectall(@functionname varchar(25))asselect * from @functionamegoI keep getting this error:Server: Msg 137, Level 15, State 2, Procedure SP_selectall, Line 5Must declare the variable '@functioname'.Whats the issue?
View 1 Replies
View Related
Apr 2, 2007
Want help in creating the stored procedure of company where id is the PrimaryKey in the table companymaster which is created in sql server 2005.1 ALTER PROCEDURE companyinsert
2
3 @companyid int,
4 @companyname varchar(20),
5 @address1 varchar(30)
6
7 AS
8
9 INSERT INTO companymaster
10 ( companyname, address1)
11 VALUES (@companyname,@address1) Procedure or Function 'companyinsert' expects parameter '@companyid', which
was not supplied.
The id is to be created autogenerate in the sequence number.There should be no duplicated companyname with different ids in same table.Apart from the above error can anyone pls give me or tell me the code or modify the stored procedure according to the above..thanxs....
View 5 Replies
View Related
Aug 28, 2007
I am trying to create stored procedure i Query analyzer in visual studio 2005. I am havingdifficulty though. Whenever I press the execute button, here is the error message I get:
Msg 102, Level 15, State 1, Procedure MarketCreate, Line 21Incorrect syntax near 'MarketName'.
Here is the stored procedure. Note that the very first column in named "MarketId" but I did notinclude it in the stored procedure since it should be auto generated.
USE [StockWatch]GO/****** Object: StoredProcedure [dbo].[MarketCreate] Script Date: 08/28/2007 15:49:26 ******/SET ANSI_NULLS ONGOSET QUOTED_IDENTIFIER ONGO
CREATE PROCEDURE [dbo].[MarketCreate]
( @MarketCode nvarchar(20), @MarketName nvarchar(100), @LastUpdateDate nvarchar(2), @MarketDescription nvarchar(100))
ASINSERT INTO Market( MarketCode MarketName LastUpdateDate MarketDescription)VALUES( @MarketCode @MarketName @LastUpdateUser @MarketDescription)
View 2 Replies
View Related
Jan 3, 2008
I was trying to create a new stored procedure. It's pretty straight forward using Insert Into. Here's what I wrote:
CREATE PROCEDURE dbo.InsertPicks@ID varchar,@Race int,@P1 varchar,@P2 varchar,@P3 varchar,@P4 varchar,@P5 varchar,@P6 varchar,@P7 varchar,@P8 varchar,@P9 varchar,@P10 varchar,
INSERT INTO tblPicks(pRace, pPlayer, p1, p2, p3, p4, p5, p6, p7, p8, p9, p10)VALUES(@Race,@ID,@P1,@P2,@P3,@P4,@P5,@P6,@P7,@P8,@P9,@P10) RETURN
I first wrote the T-SQL code myself, but when I opened the Query Builder so I could validate it and check it. It validated and when I executed it, it worked great and inserted a new record into the table. Yet, when I closed the Query Builder, and tried to save the Stored Procedure (which I assume is how you create it) I get an error that there is a Incorrect Syntax near "Insert". I see nothing wrong with the syntax, and it worked fine in the Query Builder. What am I doing wrong?
Thanks,
Bob
View 2 Replies
View Related
Mar 23, 2008
Is there a way I can use one SQL server 2005 (full edition not express) Stored procedure that can execute a .SQL file as if it were in the SQL management studio Query window?
I have the situation where I have some .SQL file which were created with the 'Create to File' option in SQL Management studio. I then want to send them to a user who can execute them to create a SP on his SQL server without having to run the SQL management tools.
Regards
Clive
View 8 Replies
View Related
May 21, 2008
I am using SQL Server Express within visual studio and am needing to create a stored procedure. The proble is that every time I finish and close it then it asks me if I want to save the changes which of course I want to.
But then it always comes up with a message box that says "invalid object name" followed with the name of the stored procedure.
??? why? I try creating a stored procedure from scratch or copying the code of another stored procedure. It alway gives me that message and does not let me save the stored procedure. I tried changing the default name of "dbo.storedprocedure1" or even leaving it as is and always I get the message that says "invalid object name: dbo.storedprocedure1" and it does not let me save the procedure.
What am I doing wrong?
View 5 Replies
View Related
Feb 2, 2004
The code is as below:
--Drop procedures if they exsit
if exists (SELECT * FROM master.dbo.sysobjects WHERE id = object_id(N'[dbo].[sp_PagedItems]') AND OBJECTPROPERTY(id, N'IsProcedure') = 1)
drop procedure [dbo].[sp_PagedItems]
GO
if exists (SELECT * FROM master.dbo.sysobjects WHERE id = object_id(N'[dbo].[sp_PagedItemsByTime]') AND OBJECTPROPERTY(id, N'IsProcedure') = 1)
drop procedure [dbo].[sp_PagedItemsByTime]
GO
if exists (SELECT * FROM master.dbo.sysobjects WHERE id = object_id(N'[dbo].[sp_selectedEventMessage]') AND OBJECTPROPERTY(id,N'IsProcedure')=1)
drop procedure [dbo].[sp_selectedEventMessage]
GO
--Definitions of procedures
USE LanDeskDB
GO
CREATE PROCEDURE sp_PagedItems
(
@QueryVARCHAR(1000),
@Pageint,
@RecsPerPageint,
@startDateVARCHAR(100),
@endDateVARCHAR(100),
@allTimeint,
@flagint
)
AS
BEGIN
SET NOCOUNT ON
DECLARE @SQL VARCHAR(2000)
DECLARE @Order VARCHAR(200)
DECLARE @TotalBIGINT
CREATE TABLE #TempTable
(
TempTableID BIGINT NOT NULL PRIMARY KEY IDENTITY(1,1),
EventLogID BIGINT ,
EventDateTime datetime,
MachineID INT ,
TypeID INT ,
SessionID INT ,
SourceID INT ,
MessageID BIGINT ,
UserID INT,
CategoryNumber INT,
EventID INT
)
IF (@flag = 1)
BEGIN
SET @Order = 'ORDER BY EventDateTime'
END
IF (@flag = 2)
BEGIN
SET @Order = 'ORDER BY SessionID,EventDateTime'
END
IF (@flag = 3)
BEGIN
SET @Order = 'ORDER BY TypeID,EventDateTime'
END
IF (@flag = 4)
BEGIN
SET @Order = 'ORDER BY CategoryNumber,EventDateTime'
END
IF(@allTime <> 1)
BEGIN
IF(LEN(@Query)>1)
BEGIN
SET @Query = @Query+'AND EventDateTime>='''+@startDate+''' AND EventDateTime <= '''+@endDate+''''
END
ELSE
BEGIN
SET @Query = 'WHERE EventDateTime>='''+@startDate+''' AND EventDateTime <= '''+@endDate+''''
END
END
SET @SQL=
'INSERT INTO #TempTable (EventLogID,EventDateTime,MachineID,TypeID,SessionID,SourceID,MessageID,UserID,CategoryNumber,EventID)'+
'SELECT EventlogID,EventDateTime,MachineID,TypeID,SessionID,SourceID,MessageID,UserID,CategoryNumber,EventID FROM EventLog '+
@Query+' '+@Order
EXEC (@SQL)
CREATE TABLE #TempTableTwo
(
TempTableTwoID BIGINT NOT NULL PRIMARY KEY IDENTITY(1,1),
TempTableID BIGINT,
EventLogID BIGINT ,
EventDateTime datetime,
MachineID INT ,
TypeID INT ,
SessionID INT ,
SourceID INT ,
MessageID BIGINT ,
UserID INT,
CategoryNumber INT,
EventID INT,
)
DECLARE @FirstRec int, @LastRec int
SELECT @FirstRec = (@Page - 1) * @RecsPerPage
SELECT @LastRec = @Page * @RecsPerPage+1
INSERT #TempTableTwo
SELECT * FROM #TempTable T
WHERE T.TempTableID >@FirstRec AND T.TempTableID < @LastRec
SELECT TempT.EventLogID AS EventLogID,TempT.EventDateTime AS EventDateTime,
Ma.MachineName AS MachineName,Se.SessionName AS SessionName,Ty.TypeName AS TypeName,
TempT.CategoryNumber AS CategoryNumber,Us.UserName AS UserName,So.SourceName AS SourceName,
TempT.EventID AS EventID
FROM #TempTableTwo TempT,Machines Ma,Types Ty,Sessions Se,Sources So,Users Us
WHERE TempT.MachineID = Ma.MachineID AND TempT.TypeID = Ty.TypeID AND TempT.SessionID = Se.SessionID
AND TempT.SourceID = So.SourceID AND TempT.UserID = Us.UserID
SELECT COUNT(*) FROM #TempTable
DROP TABLE #TempTable
DROP TABLE #TempTableTwo
SET NOCOUNT OFF
END
GO
CREATE PROCEDURE sp_PagedItemsByTime
(
@QueryVARCHAR(1000),
@Page int,
@RecsPerPage int,
@startDateVARCHAR(100),
@endDateVARCHAR(100),
@allTime int
)
AS
BEGIN
EXEC sp_PagedItems @Query,@Page,@RecsPerPage,@startDate,@endDate,@allTime,1
END
GO
CREATE PROCEDURE sp_selectedEventMessage
(
@EventLogID int
)
AS
BEGIN
SELECT Ma.MachineName,Ev.EventDateTime,Se.SessionName,Ty.TypeName,So.SourceName,Me.MessageDescription
FROM EventLog Ev,Sessions Se,Types Ty,Sources So,Messages Me,Machines Ma
WHERE Ev.EventLogID = @EventLogID AND Ev.SessionID = Se.SessionID AND Ma.MachineID = Ev.MachineID
AND Ev.TypeID = Ty.TypeID AND Ev.SourceID = So.SourceID AND Ev.MessageID = Me.MessageID
END
GO
I got the error messge as
Server: Msg 2714, Level 16, State 5, Procedure sp_PagedItems, Line 107
There is already an object named 'sp_PagedItems' in the database.
Server: Msg 2714, Level 16, State 5, Procedure sp_PagedItemsByTime, Line 13
There is already an object named 'sp_PagedItemsByTime' in the database.
Server: Msg 2714, Level 16, State 5, Procedure sp_selectedEventMessage, Line 12
There is already an object named 'sp_selectedEventMessage' in the database.
But I already delete those procedures before I create them. Could anyone give some suggestion?
View 2 Replies
View Related
Mar 14, 2001
Can I create system stored procedure in sql 7.0?
After I used 'alter' to modify a system sp, it's category
change from 'system' to 'user'. Is there way to change it back?
Thanks a lot!
Xiao
View 1 Replies
View Related
Aug 30, 2012
I am working with SQL Server 2005 Express and have written a query which works well in when run it in the managment console as a select query.
When I try to create a stored procedure out of it, I get the following error:
Code:
Msg 102, Level 15, State 1, Procedure sp_SegmentationList_ByorderID, Line 20 Incorrect syntax near ';'.
Procedure is below:
Code:
USE [ARC_Test]
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE PROCEDURE [dbo].[sp_SegmentationList_ByorderID]
@OrderID int
[code].....
View 3 Replies
View Related
Jan 14, 2004
Hello,
I'm trying to create a store procedure from an interface which is similiar to Query Analyzer, but I can't get it to work and I don't get an error message...so I'm not sure what error I am receiving. Please see the below sp_get_topics (#1) which is not saving and sp_get_topics (#2 works). Thanks in advance....
--#1--
CREATE PROCEDURE [sp_get_topics] AS
SELECT t_1.Topic, t_1.Message, t_1.Create_Date, t_2.Username
FROM t_1 WITH (READUNCOMMITTED) LEFT OUTER JOIN
t_2 WITH (READUNCOMMITTED) ON t_1.User_ID = t_2.ID
GO
--#2--
CREATE PROCEDURE [sp_get_topics]
AS
SELECT Topic, Message, Create_Date
FROM t_1
GO
View 11 Replies
View Related
Apr 2, 2004
Hi Everyone
Im trying to create a view from within a stored procedure and are having problems. Is it possible to do this? And if so, how? I've been trying with the code below.
CREATE PROC upProcName AS
DECLARE @Variable varchar(50)
CREATE VIEW vwName AS
SELECT DISTINCT Table1.*, Table2.*
FROM dbo.Table1
INNER JOIN dbo.Table2 AS BUG
ON Table1.Col1 = Table2.Col1
WHERE LI.accname = @Variable
GO
Any Thoughts ideas would be great
Cheers
View 7 Replies
View Related
Feb 27, 2008
From within a stored procedure in an existing database I'm creating a new database from the scratch.
In the query window if I write the statement:
CREATE DATABASE [tomasdb]
USE [tomasdb]
GO
CREATE PROCEDURE TEST1
AS
BEGIN
DECLARE @something varchar(12)
set @something = '123'
END
everything works ok and the database is created and the stored procedure Test1 is created within it.
However, if I want to do the same from another stored procedure (in another database), i.e. I write
EXEC('
CREATE DATABASE [tomasdb]
USE [tomasdb]
CREATE PROCEDURE TEST1
AS
BEGIN
DECLARE @something varchar(12)
set @something = ''123''
END
')
the problem I get is that I'm not allowed to put USE to change the execution context into [tomasdb] before the CREATE PROCEDURE statement.
My question is: how can I change the context in this situation / or / can I create the stored procedure in the [tomasdb] database somehow from outside (another context).
Thanks,
Tomas
View 4 Replies
View Related
Jun 20, 2006
Hi guys!i want to create one cursor in the t-sql. the problem is i want to usestored procedure instead of select command in cursor.can anyone tell me how can i use stored procedure's o/p to createcursor?i'm using sql 2000 and .net 2.0thanks,Lucky
View 12 Replies
View Related
Sep 19, 2007
HelloNewbie here.Is there a way of creating a VIEW...using a stored procedure. I ambasically trying to create a view to return some data that I amgetting using a stored procedure.I have created the procedure and when I execute this its working ok.The stored procedure uses a datefrom and dateTo which I have set up bytweaking the getdate() and getdate()-2.In other words can you create a view like thisCREATE VIEW view_testASexec proc_testGOAny help will be greatly appreciated.Remmy
View 1 Replies
View Related
