DTS Package Execution Order

Nov 17, 2004

I have a package that has 12 data pump tasks all executing in parallel.

It is transferring raw data from an AS400 DW to a MSSQLSvr Staging area.

Each pump task on completion assigns values to a set of global variables, then having done this passes these as parameters to a sproc which inserts them into a table.

This seems to work for 4 or 5 of the pump tasks but, the rest of the rows in the table are all the same because the remaining pump tasks are all executing before the sprocs.

Is there a way to make sure that the entire set of job steps completes, before starting another job set of steps while still keeping them running in parallel.

I had wondered if there was a way to use the PumpComplete phase of each pump step to fire off the sproc, but can't see how you execute the step.

Any ideas would be much appreciated.

View 1 Replies

DTS Execution Order

Jun 5, 2001

I want a task to run last after all of the other task have run. How do I ensure that this task will run last?

View 3 Replies View Related

RDL Execution Order

Aug 28, 2006

If I have a List with three tables in it, and let's say that in the first two
tables, I'm adding something to a global variable and in the 3rd table I'm
calling that global variable...can I be 100% sure that the call to that global
variable in the 3rd table will always be the result from the first two
tables?

I mean will it always be true that the first two tables are analyzed and
"executed" before that third table?

Thanks for any help. If there are any links on this topic on the microsoft
web site, please specify them. I have not been able to find anything

Thank you!

View 4 Replies View Related

Execution Of Child Package From Parent Package In Sql Server 2005 Integration Services

May 21, 2007

Hi,

I created a package which passes some infornmations( through parameters) to its child package.

I need to do some processing in parent package based on execution status of child package.i.e.

if child fails then some operation and if child succeeds then other operation.

To determine the status of execution of child package I am using two differnt constraint ..one constraint is having value "Success" and other having value "Failure".

My problem is that when child packge is executed successfully the constraint with value = "Success" works properly but when child fails the constraint with value "Failure" does not work.

-Prashant

View 4 Replies View Related

Task Execution Order

May 20, 2006

Hi,

Is there any way to enforce task execution order within a control flow? I need to have tasks execute after each other, because for example Task B depends on the execution of Task A.

Doesn't the success constraint enforce execution order? When I run my package the tasks seem to execute in a random order which is not what I want.

What I am trying to do is:

Loop through all Xml files in directory

For each Xml file:
For categories, products & fields:
Truncate staging table
Insert data from Xml file into staging table

After all Xml files have been processed then import data from staging to main tables

Here is my control flow:
http://www.myfootballonline.com/flow.png

View 6 Replies View Related

Table Execution Order

Nov 14, 2007

I have nested lists and I want to set a global value in my custom code AFTER a specific table footer row. Does anybody know in what order the table elements are rendered? I have tried adding my piece of code into a group value, the hidden property, the color property, and sending it as a parameter to a subreport, but it still sets that variable first before rendering the table footer row that I want to display before I set that variable. I have been pulling my hair out trying to do this one! Help!

BJ

View 1 Replies View Related

Execution Order In A Transaction Batch

Feb 29, 2008

Is the order of execution guaranteed to go from top to bottom in a transaction that has multiple statements like below?

BEGIN TRAN T1;
UPDATE table1 ...;
UPDATE table2 ...;
SELECT * from table1;
UPDATE table3 ...;
COMMIT TRAN T1;

How about here?

BEGIN TRAN T1;
UPDATE table1 ...;
BEGIN TRAN M2 ;
UPDATE table2 ...;
SELECT * from table1;
COMMIT TRAN M2;
UPDATE table3 ...;
COMMIT TRAN T1;

how can i guarantee that statements will be executed from top to bottom in a transaction batch like above? I am not interested in the errors in statements. I just want whole thing to either execute fully from top to bottom or none executes

View 2 Replies View Related

Foreign Key Constraints Execution Order?

Sep 4, 2006

How can I get and or set the order in which the cascading deletes of a table are executed??
I have table A with cascading deletes to Table B and Table C. Records in table B can not be deleted if they are referenced from table C. So if I delete C, then B and then A; that would work. But B then C and then A might be prohibited due to the constraint between B and C. Therefor the order of execution of the cascading delete is important.

View 2 Replies View Related

Execution Order Insert && Update

Mar 18, 2008

Hello All,

I have a Conditional Split, where there are two outputs.

First output is a dataset which is to be inserted into the database.

Second output is a dataset for which the data already exists in the DB. I just need to update those data.

I have a doubt here. I want the insertion to be done first and then updation.
Is there any property to be set for insertion or updation, something that maintains the order of execution or priority of execution.

Please do ask me if you need any further clarification.

Thanks,
Kapadia Shalin P.

View 5 Replies View Related

ForEach Loop Execution Order

May 27, 2008

Hi

I am designing a ETL system to extract data from multiple systems. I have designed a batch control application and database to manage the process. I was thinking of extending this to include the execution of the SSIS packages. I would basically store all of the package details in the database, and when I am executing a particular systems load, I would get the list of packages required and loop through them in a ForEach loop. The question I have is can I guarantee the order of execution? I will put an order or execution in the DB and when I select the data, I can order by these columns.
I am concerned that in putting the data into a record set in SSIS its order could be changed resulting in the packages executing incorrectly.

Has anyone done anything similar to this and and run into problems, or is it not an issue?
Many Thanks
Michael

View 5 Replies View Related

Analysis :: Measure Group Execution Order

Sep 21, 2015

I am executing a CUBE which is having 9 measure groups, i need to know order of the execution of the measure groups.??

ex:
1. fsales
2.ftranssales
3.fitem
4.fstores..............etc...

I know, the dimension are executed first, but not aware of the order of execution of measure group.

View 4 Replies View Related

SSIS Tasks Execution Order Problem

Jun 9, 2006

Hi,

I'm facing a problem with my SSIS package regarding the execution order of tasks. I am using my package for the purpose of loading data from XML to staging tables in the database, and have a loop to process all XML files.

As a precondition to the loading action itself, I am running a stored procedure against the database (using the ExecuteSQL task) to check whether all staging tables are empty. The output parameter of that stored procedure is mapped to a variable I have defined in the SSIS package, so I can use it as a basis for the decision whether to run the loading action or not.

In order to test my package I added a script task, right after the execution of the stored procedure with a precedence constraint, that pops up a messagebox with the value of the stored procedure return value stored in the package variable.

The problem is that for the first iteration of the loop, the variable value presented by the messagebox is incorrect (equals to the initial value I assigned to the variable), and it looks like the script task starts before the stored procedure execution task finishes and its output value is stored in the package variable.

Please assist.

View 5 Replies View Related

SQL Server 2012 :: Order Of Execution Of Statement With GO Statements?

Jan 16, 2014

Curious if I have the code below as an example and I execute this code does sql execute from top to bottom? And does the Update run and complete before the delete occurs? Or does SQL execute the update and delete in parallel?

UPDATE tbl1 SET col1 = 1

GO

DELETE FROM tbl1 where col2 = 2

View 2 Replies View Related

Server Query Execution - Where Filtration Order - Performance Impact

Jul 27, 2015

For example in a Select Statement we have many tables and we have Where Clause with many conditions with AND operations. Do the SQL SERVER would apply the Where clause after all fetch or can dynamically decide about to include the related Tables from Select Statement Orderly with respect to where clause predicates? (SQL SERVER would not fetch data of those tables for its Select, where the AND condition in Where clause fails or by logic would be fruitless/not-related.)

View 5 Replies View Related

DTS Package Execution

May 15, 2001

I have already created package which loads a text file to database.I wanted to execute that package based on the availability of the file using Visual Basic,Perl or VBSCRIPT whichever is easier.Please advise.Thanks

View 4 Replies View Related

DTS Package Execution - When Is It Done?

Oct 30, 2000

I wrote a stored procedure that calls a DTS package that imports a file into a SQL Server table, then executes some commands on that table. How can I tell that the DTS package has completed, so that I can continue with the next command? Here is my code:

-- Run the DTS package
EXEC @Result = msdb..sp_start_job @job_name = 'MyJob'
WAITFOR DELAY '00:00:02'

-- Call the table that the package created
SELECT * FROM <imported_table> WHERE ...

I had to insert a WAITFOR statement to make this work. Any other suggestions as to how to know when to continue?

Thank you.

View 4 Replies View Related

DTS Package Execution

Mar 18, 2004

Is there a method to either:
A) Kick of a DTS package directly from a stored procedure without shelling out to the DTSRun facility.
B) Kick off a scheduled job containing a DTS task from a stored procedure?

What's the best method?

View 2 Replies View Related

Package Execution ...

Feb 11, 2008

Hi Friends,

I need help from you.
I am working on SSIS packages for ETL purpose.
The version of SQL Server i am using is SQL Server 2005.

In Brief , the working of current ETL is as follows.

In ODS database i have 2 tables i.e Table_A & Table_B which gets loaded from another 2 staging tables A & B.
And using this 2 tables data will be loaded into a target table i.e Trg_A.

The ETL packages are executed by stored procedures by creating a job within the stored procedure.

The loading of the trg table is little tricky.
Before that loading of Table_A is implemented in a single SSIS package.
and loading of Table_B is been implemented in another SSIS package.

In the trg table there are two columns which will be getting updated as and when each table is loaded.
so for the first time if i run the package which is resposible for loading Table_A, it loads values into Table_A and once done it will updates (col1) in the target table.

Once after the complete of the execution of Package1.
Now i will kick off the second ssis package which loads the data into Table_B and updates the trg table's columns (col2).

Now the actual problem what i am facing is:

For loading Table_A and updating the col1 in Trg table i will be receving more than 5 excel file every month on weekly basis.
I cannot even gather all the files and run using a For-Loop counter.
So presently i am loading data excel file per week .

Similarly loading of table_B.

For a week if i am executing both the packages which loads the Table_A and updates the Trg(col1) and Table_B and updates Trg(col2), then i am getting a Deadlock Error and the entire ETL is getting messed up.

Now my requirement is , Eventhough the 2 packages are run in parallel , there could certain milli seconds time difference while start of the execution in Job Monitor.
I need to implement a Queing Mechanism which takes care of running the packages in a sequential manner rather than in parallel. i .e i need to ensure only one SSIS package is running in Job Monitor. Only after successful execution of either one the package, then only the second package should start its execution.

If we can implement such a queing mechanism , then my problem is solvedl.

I need some suggestions on this regard in implementing the Queing mechanism in a programatic approach using SQL Server Job Related MetaData Tables.
or else is there in server parameter or initialization parameters which can be set at Database level which suffice my requirement.

Any suggestions would be greatly appreciated.
Looking for sincere comments on this regards.

Thanks in advance.

View 3 Replies View Related

DTS, Finish Execution Of The Package

Nov 25, 2004

I want to finsih the execution of a DTS package from an ActiveX task. If a condition is ok, the package would continue as normal. If not, I want to finish the package without any error. Just without executing the next tasks. Do you have any idea?

Thanks

View 1 Replies View Related

Package Execution With Custom UI

Jun 11, 2007

Hi:

I need a user to pass an input to a package from a VB form, and then want to show progress/errors in the form.

I have been able to use Application. LoadFromSqlServer and I then set pkg.Variables.(MyVariable) to the required value before calling Execute.

Works fine so far.

I dont know how to show progress. The DTSExecResult just returns a Cryptic Success /Failure status message.

Is there a way to log the errors if any to my Windows form? I have seen samples on Console Apps(see below) but I would prefer to show it in my Windows form in a text Box or something, appending each error result to the text.

TIA

Kartik

Code Snippet

Class EventListener
Inherits DefaultEvents

Public Overrides Function OnError(ByVal source As Microsoft.SqlServer.Dts.Runtime.DtsObject, _
ByVal errorCode As Integer, ByVal subComponent As String, ByVal description As String, _
ByVal helpFile As String, ByVal helpContext As Integer, _
ByVal idofInterfaceWithError As String) As Boolean

' Add application��specific diagnostics here.
Console.WriteLine("Error in {0}/{1} : {2}", source, subComponent, description)
Return False

End Function

End Class

View 1 Replies View Related

Conditional Execution Of A Package.

Feb 28, 2008

I have basic knowledge of SSIS and will appreciate if some can suggest a way (with example if possible), to solve this problem.

I have an SSIS package that requires execution of another package, lets say B. This I am able to do using the 'Execute package' task. Now, what I really want to do is, I wish to check if a perticular table 'A' has rows that satisfy a given condition. In other words, I wish to execute Package 'B' onle if Table 'A' has rows. How can I do this?

Thanks in advance.

View 8 Replies View Related

Stop The Package Execution

Aug 2, 2006

Hello all

I want to cause the package to fail in DataFlow. I wanted use the script component for this purpose.

How I can do it?

Thanks

View 1 Replies View Related

SQL Server Package Execution

Nov 24, 2006

I tried to execute the package,which is importing the data from the Flat file(flat file from map network drive on other computer).But Packages are created and executed on Server.While i executing that package it shows error as "Package could not be found.".

Please help me ASAP.

Thanks in advance

View 2 Replies View Related

Execution Package Task-SOS

Feb 21, 2007

hello to every body.. well i have a problem.. well i created a package the task of which is to update thedimensions and the fact tables from the tables of source.

i created a configuration file with all the parameters that are nedded (connections managers; parameters of packages).this config file will include all the paremeters need for the execution of other packages

In that package i call an other package (execution package task). this package normally will take the parameters of the parent package isn't it??(i put the parameters of this package to the config file of the parent package).

i must also note that for the second package called there is also a package...

i must also note that i have 2 DWHs (a and b) for testing.

the problem is that when i execute the parent package to DWH b , the sacond package called do not take the parameters of the parent package. instaed it looks to its XML configuration file(in a different location of the config file of the parent package) which contains the connection parameters to DWH a and it calls strored procedures from the DWH a (instead of calling at SP from DHW b).

any ideas??

thnx a LOT0

View 3 Replies View Related

Execution Of DTS Package After Scheduling.

Sep 13, 2006

Hi All,

I have a problem in getting the info about the execution of a DTS Package.

I have a SQL-2000 Client installation on my Desktop to connect to SQL-2000 Server Database system to do all of my work. i had a DTS package stored in my SQL Server2000 Local Packages. Now i have to schedule the DTS Package from my Desktop. And the DTS package is processing some files from a shared network folder. when i used to run the DTS package manually from my desktop my desktop login have access to that shared folder so there is no problem to run the package.

suppose i scheduled the DTS to execute on daily basis at 10:00 AM. Now my doubt is wher the DTS will be executed after scheduling, which starts DTS execution and is it required my Desktop to be up daily at 10:00 AM, and how the network shared folder is going to be accessed by the DTS, means where to specify the authentication to the shared folder.

somebudy plz help me out.

Thanks in advance.

View 2 Replies View Related

SSIS Package Execution

Apr 4, 2008

Hi all,

Which is the best way to execute SSIS packages? I have no problem to use dtexec command but I want it to run every night. Is this going to be done through the SQL Server (SQL Server Agent under Jobs)? Is the type going to be Operating System (CmdExec) or Transact Sql? How exactly is the command written there?

Thanks in advance.

View 6 Replies View Related

Package Execution Stability ?

Jul 13, 2007

I am running into some issue that i have found any good clue on this forum... although have seen a few threads dicussions. I have a master package which invokes a dozen of child packages.

1) If I only open master package inside IDE, I am keeping getting the following error when i run the master packages inside Visual Studio 2005 IDE.

The connection type "FLATFILE" specified for connection manager "XXXXX Flat File Destination Connection Manager" is not recognized as a valid connection manager type. This error is returned when an attempt is made to create a connection manager for an unknown connection type. Check the spelling in the connection type name

2) If I opened up all child packages inside IDE, the master package run fine most of time.

Any suggestions?

View 26 Replies View Related

Package Execution Failed

May 9, 2008

Hi everyone,

I just deployed my first interface and below is the error message

failure". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E4D Description: "TCP Provider: An existing connection was forcibly closed by the remote host. ". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E4D Description: "Login failed for user 'EUROPExxx123$'.". End Error Error: 2008-05-09 11:01:13.00 Code: 0xC020801C Source: Load New Data Into TransDat... The package execution fa... The step failed.

The interface is just to copy the data from 1 database to another based on a date. I suspect that i could have missed a step during the deployment, can someone tell me if the error is caused me forgetting to configure something during the step up of the job or is it network related

Regards
Ash

View 2 Replies View Related

Variables / Package Execution

Jul 17, 2006

I have 10 or so packages with package scope variables. I would like to create a package that not only runs all the packages but also sets the variables within the packages being executed.

A) Whats the best way to run all the packages from one (package??)?

B) Whats the best way to set the variables in the child packages, without having to change them manually everytime I run it.

Thanks,

Mardo

View 3 Replies View Related

SSIS Package Execution

Dec 21, 2006

Hi all,
I am Hazara. I am trying to call a SSIS package from a web service. But package.execute() method is returning 'failure'. Though I am able to execute the same package from a normal .Net project and it is working fine (using the same code that i have used in web service).

I have also tried to execute it through stored procedure for which firstly I created a .dll in c#(which is perfectly working) and then I registered this .dll in sqlserver-2005 using following command.

CREATE ASSEMBLY asmPackageExecuter FROM 'C:WINDOWSMicrosoft.NETFrameworkv2.0.50727PackageExecuter.dll'
WITH PERMISSION_SET = UNSAFE
GO
Now on calling the method of .dll (which is responsible to execute the package) I am getting the DTSExecResult as 'success' but data is not getting transfered from one able to other as was expected from the package.

Please help me. I have searched it everywhere on net but didn't get any solution.
I want to execute package only through web-service or stored-procedure

Thanks
Hazara.

View 3 Replies View Related

Package Execution Takes 100% CPU

Jul 24, 2007

Hi all,

I have a package which updates a table which contains a large amount of rows, when this package is runnning the process consumes 100% CPU and other services are crashing (SSAS, SPS, SSRS).

Is there any parameter which could be set to avoid SSIS to consume 100% of the CPU during the execution of this package ?

View 4 Replies View Related

Package Execution Progress

Nov 13, 2007

I have a pacakage wich loads data from a .csv file into my database. When I run the package from Visual Studio there is a Progress/Execution Results tab where I see information about the progress. I would like to insert some of these messages into my database. I tried to handle the OnProgress event with an Execute SQL Task and insert the Progress descriptions, but that doesn't seem to give all the information I see on the above mentioned tab (moreover, I get different numbers of events running the package from VS and running it programmatically from c#, why is that?).

What I really would like to get are the messages from the Progress tab which look like these:

[Agreement File [11773]] Information: The processing of file "D:****files*********.csv" has started.

[Agreement File [11773]] Information: The total number of data rows processed for file "D:****files*********.csv" is 201.

[Agreement File [11773]] Information: The processing of file "D:****files*********.csv" has ended.

[DTS.Pipeline] Information: "component "OLE DB Destination" (12598)" wrote 200 rows.

Any help would be appreciated.

View 3 Replies View Related

Execution Of Package Failed

Jan 12, 2006

I am trying to design package which would copy all tables and stored procedures from one server to another. It used to be simple task in SQL 2000, there was wizard. However the new wizard does not work...

I wrote SSIS package, but when I execute I get the following error: "Can not apply value null to property Login..."

Any idea? It seems to me that this new SQl2005 is not that simple to use like 2000. 2000 was a great product. I am considering to rollback to 2000. Very frustrated with the new one...

View 31 Replies View Related