DTS Package Insertion Error
Mar 2, 2007
hi frnds,
im very new to DTS package.
i had created the DTS package in SQL Server 2000 to read from the textfile and to populate the values in DB.
Source file is text file(delimited file with | as delimiter), destination is DB.
while inserting the records in DB . im getting the error as :
Transformcopy DTS transformation _ 1 conversion error : conevrsion invalid for datatypeson column pair 1 (Source column 'Col022(DBTYPE_STR),destination column usr_nct_timestp(DBTYPE_DBTIMESTAMP)
but i dont hvae NULL values in any of the cols.
please help me .
thnkx in advance. its urgent.
View 1 Replies
ADVERTISEMENT
Jun 18, 2008
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
go
ALTER PROCEDURE [dbo].[usp_World_Ins_data]
-- Add the parameters for the stored procedure here
@UserName nvarchar(50),
@Password nvarchar(15),
@Email nvarchar(100),
@IsChecked bit,
@ReceiveNews bit
AS
BEGIN
SET NOCOUNT ON;
IF EXISTS(SELECT UserName FROM World_Registration WHERE UserName=@UserName)
RAISERROR('Username exists',16,1)
ELSE IF EXISTS(SELECT Email FROM World_Registration WHERE Email=@Email)
RAISERROR('Email exists',16,1)
ELSE
INSERT INTO World_Registration(UserName,Password,Email,IsChecked,ReceiveNews)
VALUES(@UserName,@Password,@Email,@IsChecked,@ReceiveNews)
END
if executed once it works properly like
[usp_World_Ins_data] 'aa','aa','ravinderpal@netbiz.in','1','1'
while if i m trying to execute stored procedure like this three times
i mean more than one time
[usp_World_Ins_data] 'aa','aa','ravinderpal@netbiz.in','1','1'
[usp_World_Ins_data] 'aa','aa','ravinderpal@netbiz.in','1','1'
[usp_World_Ins_data] 'aa','aa','ravinderpal@netbiz.in','1','1'
it gives error:
Msg 170, Level 15, State 1, Line 2
Line 2: Incorrect syntax near 'usp_World_Ins_data'.
pls help me
View 3 Replies
View Related
Jan 29, 2014
I have a scenario in which if I do bulk insertion in a table and if any error occurs then insertion should not stopped and will proceed with insertion of remaining records.
View 2 Replies
View Related
Jan 15, 2008
Having searched the forum, this one clearly has form... However beyond assisting those who have fallen at the first hurdle (i.e. forgetting/not knowing that they cannot execute the package remotely to the instance of SQL Server into which they are inserting), the issues raised by others have not been addressed. Thus I am bringing nothing new to the table here - just providing an executive summary of problems which others have run into, written about, but not received answers for.
First the complete error:
Description: Unable to prepare the SSIS bulk insert for data insertion. End Error Error: 2008-01-15 04:55:27.58 Code: 0xC004701A Source: <xxx> DTS.Pipeline Description: component "<xxx> failed the pre-execute phase and returned error code 0xC0202071. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 4:53:34 AM Finished: 5:00:00 AM Elapsed: 385.384 seconds. The package execution failed. The step failed.
Important points
It mostly works - It produces no error more than 9 times out of 10.
It fails on random dataflows - My package has several dataflows, (mostly) executing concurrently. Where the error occurs it does not do so on the same dataflow each time: on one run it'll fail on dataflow A whilst B,C,D and E succeed, then A-E will all succeed (and continue doing so for the next ten runs thereafter), and then the error recurs for dataflow D, with A,B,C and E all succeeding.
Hope someone has something interesting to say,
Tamim.
View 10 Replies
View Related
May 19, 2006
I had just installed SQL 2005 dev on my laptop and got an error message when I tried to create a package using the BI IDE. I received the same error using VS2005 IDE. But the project was created regardless without any packages. When I tried to create a new package in the project, I received the same error again, but with an option to view the error details.
Following is the text of the error details:
TITLE: Microsoft Visual Studio
------------------------------
Error creating package
------------------------------
ADDITIONAL INFORMATION:
Failed to save package file "C:Documents and SettingsmyoungbloodLocal SettingsTemp mpD4B.tmp" with error 0x80040154 "Class not registered".
------------------------------
Failed to save package file "C:Documents and SettingsmyoungbloodLocal SettingsTemp mpD4B.tmp" with error 0x80040154 "Class not registered".
------------------------------
BUTTONS:
OK
------------------------------
I found a similar post that suggested that they try the following:
regsvr32 msxml3.dll
regsvr32 msxml4.dll
regsvr32 msxml6.dll
But msxml6.dll could not be found.
I did get a copy of this file from a coworker, and after copying it and registering it, I was able to add a package to the project.
My concern now is what is the likelyhood of this being the only file missing from the installation.
I'm wondering if I should reinstall, or (if it exists) do a repair on the installation.
Thanks.
Marshall
View 12 Replies
View Related
May 19, 2006
Hello,
I have a big problem and i'm not able to find any hint on the Network.
I have a window2000 pc, VS2005,II5 and SQLServer 2005(dev edition)
I created an SSIS Package (query to DB and the result is loaded into an Excel file) that works fine.
I imported the dtsx file inside my "Stored Packages".
I would like to load and run the package programmatically on a Remote Scenario using the web services.
I created a solution with web service and web page that invoke the web service.
When my code execute:
Microsoft.SqlServer.Dts.Runtime.Application.LoadFromDtsServer(packagePath, ".", Nothing)
I got the Error:
Microsoft.SqlServer.Dts.Runtime.DtsRuntimeException: The package failed to load due to error 0xC0011008 "Error loading from XML. No further detailed error information can be specified for this problem because no Events object was passed where detailed error information can be stored.". This occurs when CPackage::LoadFromXML fails.
The error message doesn't help so much and there is nothing on the www to give me and advice....
Is it a SSIS problem???
Thank you for any help!!
Marina B.
View 10 Replies
View Related
Mar 4, 2008
Hi
My Server having DTS package even Job failing saying
"Error string: The specified DTS Package ('Name = 'ERP_Mater_Encript_Data_Move'; ID.VersionID = {[not specified]}.{T0I37w32-AB51-1SA4-9495-AcE6SSS4a321}') does not exist"
Please help regarding.
View 3 Replies
View Related
Feb 2, 2007
Hi,
I have developed an SSIS package for ETL purpose. I am invoking the SSIS package through .Net console application by referencing the ManagedDTS Assembly. I am able to execute the package in Sql Server 2005 Developer Edition and it runs fine till completion.
But when i try to execute the packahe in Sql Server 2005 Standard edition, by invoking the package through .Net console application the status of the package is failure.
Can any one help me how to over come this problem.
View 1 Replies
View Related
Jun 14, 2006
While Creating a script task in Control Flow, I am getting "Package Validation Error". Here is the complete message:
Error at Validate File and Load Data: The task is configured to pre-compile the script, but binary code is not found. Please visit the IDE in Script Task Editor by clicking Design Script button to cause binary code to be generated.
(Microsoft.DataTransformationServices.VsIntegration)
As mentioned in the message, I opened the script IDE and added the code I need. When I close the VSA IDE, package designer displays the same error message.
The worst part of whole story is that if I close the package designer and reopen it, I find that all the code I wrote in the script task has been deleted by the package designer. This is not at all acceptable as I saved the package the and still lost all my work. I did all the coding from scratch for that task.
Please respond if anyone faced similar problem.
Thanks in advance!
Anand
PS: If any one from Microsoft is reading this, please see what you guys are coding there. Due to the buggy software you deliver, I am loosing my credibility.<P< P>
View 5 Replies
View Related
Jun 8, 2007
I am having problems executing a child package from a parent package using the Execute Package Task. I am attempting to run the master package through a SQL Server Agent job.
The SQL Server Agent job is owned by sa. The step that runs the parent package is configured to load the package from the SSIS Package Store on the same server that the job is running.
I have the Execute Package Task configured as follows:
Location: SQL Server
ExecuteOutOfProcess: True
Connecting as a SQL Server login (let's say TestEtl)
I have added the db_dtsoperator database role to both the TestEtl login and the login that SQL Server Agent connects through. I have also configured the child package's reader role to include db_dtsoperator. Per http://msdn2.microsoft.com/en-US/library/ms141053.aspx, this should allow these logins to run the child package.
I have enabled logging of all events in both the parent and child packages. I see the following in the logs when the Execute Package Task executes (omitted portions unrelated to the execution of the child package task):
450939 OnPreExecute ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450940 OnPreValidate ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450941 OnPostValidate ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450942 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_pre: The object is ready to make the following external request: 'IDataInitialize::GetDataSource'.450943 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_post: 'IDataInitialize::GetDataSource succeeded'. The external request has completed.450944 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_pre: The object is ready to make the following external request: 'IDBInitialize::Initialize'.450945 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_post: 'IDBInitialize::Initialize succeeded'. The external request has completed.450946 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_pre: The object is ready to make the following external request: 'IDBCreateSession::CreateSession'.450947 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_post: 'IDBCreateSession::CreateSession succeeded'. The external request has completed.450948 OnError ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 Error 0x80070005 while preparing to load the package. Access is denied. . 450949 OnError ParentPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 Error 0x80070005 while preparing to load the package. Access is denied. . 450950 OnTaskFailed ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450951 OnPostExecute ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450952 OnWarning ParentPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors. 450953 OnPostExecute ParentPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450954 PackageEnd ParentPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 End of package execution.
I am sure that what I am doing is quite common, and I obviously have something misconfigured somewhere - but I'm not sure what my misconfiguration is. Can anyone enlighten me?
View 6 Replies
View Related
Feb 21, 2007
I cannot execute a package by using Execute Package task.
I supplied sa credentials to connection manager, and it shows the list of Packages on SQL Server but when running the task it says
Error 0xC0202009 while preparing to load the package. An OLE DB error has occurred. Error code: 0x%1!8.8X!.
Any clue ?
Thanks,
Fahad
View 1 Replies
View Related
Dec 13, 2007
Hi,
I am running dts in Sql Server 2005 management studio from Management, Legacy and data Transformation Services.
Once the dts has run, I get this error message "Error Source : Microsoft Data Transformation Services (DTS) Package Error Description : Error accessing Windows Event Log."
Please help me
thanks in advance
Srinivas
View 1 Replies
View Related
Aug 1, 2006
I have a SSIS package that reads data from a dump table, runs a custom script that takes date data and converts it to the correct format or nulls and formats amt fields to currency, then inserts it to a new table. The new table redirects insert errors. This process worked fine until about 3 weeks ago. I am processing just under 6 million rows, with 460,000 or so insert errors that did give error column and code.
Now, I am getting 1.5 million errors. and nothing has changed, to my knowledge. I receive the following information.
Error Code -1071607685 Error Column 0 Error Desc No status is available.
The only thing I can find for the above error code is
DTS_E_OLEDBDESTINATIONADAPTERSTATIC_UNAVAILABLE
To add to the confusion, I can not see any errors in the data written to the error table. It appears that after a certain point is reached in the processing, everything, or most records, error out.
Any help is appreciated.
Thanks
Derrick
View 21 Replies
View Related
Mar 31, 2008
Hey...
I am running a parent SSIS package (running sp2, 9.0.3042) that calls several child packages.
On our development server, we now cannot run this because we get 1 or more of these errors:
"Error 0x80004003 while preparing to load the package. Invalid pointer . "
"Error 0xC0011008 while preparing to load the package. Error loading from XML. No further detailed error information can be specified for this problem because no Events object was passed where detailed error information can be stored. . "
It is not occuring on the same packages. It varies every time it is run.
I can run every one of the child packages individually, using the same login ID that the parent is executed under.
The parent package works fine on my local machine and other servers running the same version of SSIS. Just not on this server.
Does anyone have any ideas???
Thanks
BobP
View 17 Replies
View Related
Sep 4, 2007
SQL Server 2000
Good day all,
I've been asked to create a DTS package that will execute 2 other DTS packages (yeah, I know... personally I want to write a sp for it *shrug*) and send an e-mail out reporting a failure and failure details.
So I have a couple of questions for you;
How do I pick up the error number (and description?) from a failed DTS and pass it to my sendmail task?
Is it possible to send anything other than plain text e-mails?
Can I change the e-mail priority to "high"?
I appreciate any help you can offer me :)
View 10 Replies
View Related
Apr 28, 2008
Please someone help to get out this situation
How to perform bulk insertion in a table for different records
View 4 Replies
View Related
Jun 10, 2008
How to bold a value while inserting into the table in SQL 2005?
View 1 Replies
View Related
Apr 3, 2006
How to get information , if there is no insertion of a row in a table within particular span of time.
View 2 Replies
View Related
Dec 20, 2006
Hello,
I have a bundling package that runs about 20 other packages. It has been working fine for a while but a couple of days ago it fail with the following message,
Error 0x800706BE while loading package file "D:PackagesToradSales.dtsx". The remote procedure call failed.
I´m running the SSIS packages in an 64-bit environment.
Thankful for help with this!
//Patrick
View 3 Replies
View Related
Mar 23, 2007
I am using vs2005 and sqlserver2000
My problem is i have 5 checkboxes and some textboxes.In this user selects the checkbox and textboxes dynamically .In this user selects one or two or three or when user selects header checkbox then all checkboxes are selected.And in my database i mentioned a single column for group of checkboes.So how should i insert the data into database
dim con as new sqlconnection("userid=sa;pwd=; initial catalog=test")
dim cmd as sql command
Protected Sub Button1_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Button1.Click
cmd.CommandText = "insert into check values(" what should i write here ....'" & text.text &"','" @ text2.text "'... ")
con.open()
cmd.executenonquery()
con.close()
End Sub
View 2 Replies
View Related
Nov 26, 2007
Hi,
I am working on an application that is to read a large number of XML files, take out specific values from each file, and store these in a SQL server so that reports can be generated from these values. There are some 15-20,000 files for each month of the year. I am OK with parsing the files and getting the fields that I need but I don't want to insert one record at a time as I parse the files. I was told that I can create a .exe file that parses the xml files and stores the required values in a csv file and use these csv files to initiate a bulk insert, using Business Intelligence Studio. I have not been able to find any info or article on how to do this. Any help on how I can accomplish this, or alternate solutions is greatly appreciated.
View 2 Replies
View Related
Jun 19, 2005
Hi guys,i want to make a scheduled job that inserts 10 user defined row each minute continously in enterprise manager
View 1 Replies
View Related
Jun 10, 2008
Hi Experts ,
I want to insert datas randomly to all columns of a table.The columns have different datatypes like int,varchar,datetime. What to do??? It is urgent so please help.
TIA
RKNAIR
View 2 Replies
View Related
Jun 10, 2008
Hi Experts ,
I want to insert datas randomly to all columns of a table.The columns have different datatypes like int,varchar,datetime. How to create a procedure for the same??? please help.
TIA
RKNAIR
View 1 Replies
View Related
Mar 1, 2006
i am new to sql server
i want to insert five rows continously in sql server database.
my problem is like this .
i am inserting user datails. i want to get the userid which is an identity column.with the userid i want to insert userid and roleid in another table.Roleid values 1 to 5. ie constant.
an sql procedure is required.
View 10 Replies
View Related
Jul 20, 2005
Hi everyone,I tried to upload my database to my web host. Nevertheless as they donot give me enough permission to perform some DTS thus I have togenerate script to do it myself. The problem is MSSQL scriptgeneration operation can only generate the definitions of the objects,no data insertion sql is created.So is there any method to create insertion script for all the tablesin my database (they have automated increment key as well)Hope for your response!Thank you
View 2 Replies
View Related
Oct 4, 2007
I have a table called ACCOUNTS which has 60,000 rows already in it. It has a columns called PolicyNo and PremiumBasisCode. PolicyNo has data inside it whereas Premiumbasiscode is NULL.
Now I have to insert the data inside the PremiumBasisCode Column from Table1 into ACCOUNTS table by joining them on Policy No (Inner Join).
One thing to remember, there are already 60,000 rows for which this insert needs to take place. What will be the best approach.
Chintan
View 4 Replies
View Related
Feb 6, 2005
Hi Guys,
SQL Server 2000
I've run out of ideas on what to do with a DTS process that has suddenly started giving an error when one company is processed on it.
Here's the deal:
DTS package launches a complex set of stored procedures (built entirely without error handling) as a step in importing data from various customers. I have isolated the error to one segment where I have to cursor through records that have been identified as having changes. Unfortunately, this cursor is updating about 15 system tables and uses modular stored procedures, about 12 of them, to do the job.
Error: The classic Subquery returned more than one value.
Oddity: If I run the code in Query Analyzer I never get an error, the code finishes without complaints. If I run the exact same code via the DTS package I always get the error. Note that the cursor appears to process every row assigned to it and then the sproc throws the error.
What I've Tried:
1) The obvious, reviewing the code for any unprotected subqueries. Haven't found it.
2) Checking for @@Error = 1 at key points in the code to try to isolate where this is happening. Can't catch it.
Note that this same process is used for several other company's data import process and they do not error even when running the DTS package. Therefore I'm assuming it is a data issue with the one company that errors that is causing the problem.
Any suggestions on what to try next would be greatly appreciated!
Thanks!
View 2 Replies
View Related
Sep 13, 2006
I am working in ASP.Net2.0 and Sql server 2005.Using asp button(FormView) I am trying to insert the data from the form into the database and at the same time want to move on to another page indicating the succes of insertion.My code: <asp:Button ID="InsertButton" runat="server" CausesValidation="True" CommandName="Insert"Text="Submit" PostBackUrl="~/ClinicDownload.aspx"></asp:Button> It is moving on to another page, but no insertion is taking place. If I don't give the PostBackUrl then I can insert. I want to do both in one click....Hope someone can help me. Regardspreeshma
View 1 Replies
View Related
Apr 12, 2007
Hi there,
Is there a way to retrieve the set of primary keys from an inserted record, especially when the primary keys are generated upon insertion (ex. identity, uniqueid)? Basically I need to get the ID of the record I just inserted so that I can use it as a reference to that record in other places.
I'm using MS SQL and raw SQL commands (ie. no database interfacing objects). I'm hoping I can tag some sort of SELECT statement on the end of the INSERT command that will give me the results that I need.
Thanks!
View 3 Replies
View Related
Aug 27, 2007
I am using BLL for inserting my data. I have some date filed and I have declare that field in BLL as date only. But still it is giving me error string in wrong format. My database is in SQL Server2005
View 6 Replies
View Related
Jun 19, 2008
Hi Friends,I have 3 labels Steet,City,Pincode and 3 textboxes related to the labels and one button as nae 'Address'I gave the data for Street:abc,City:xyz,Pincode:123 and have to insert into the table.I created one table in the database with table name Adreess and column address varchar(100)but after giving the values in the textboxes and clicked on the button its throwing the exception i.e System.Data.SqlClient.SqlException: The name "abcxyz123" is not permitted in
this context. Valid expressions are constants, constant expressions, and (in
some contexts) variables. Column names are not permitted.I wrote the code like following protected void Button1_Click(object sender, EventArgs e) { string street = txtStreetNo.Text; string city = txtCity.Text; string pincode = txtPincode.Text; string com = street + city+pincode; conn.Open(); SqlDataAdapter daInsert = new SqlDataAdapter("insert into Address values(" + com.ToString() + ")", conn); daInsert.SelectCommand.ExecuteNonQuery();--->here its giving the exception conn.Close(); Response.Write("the values are inserted"); }Please any one tell me am I did the code write or not if its not please give any suggetionsthanksGeeta
View 3 Replies
View Related
Nov 17, 2003
Hey,
I would like to prepare a string variable for SQL insertion. Like, replacing all the single quotes with the HTML code equivilent and such. Has anyone written alything like this? Is there a tutorial on the web for it? A control maybe?
Mike
View 2 Replies
View Related
