Database Mirroring Transport Is Disabled In The Endpoint Configuration.

Aug 3, 2006

Hi.

I am getting this error.

Msg 1486, Level 14, State 2, Line 2
Database Mirroring Transport is disabled in the endpoint configuration.

Someone please help me.It's urgent.

I am using same PC with 2 different intsances.

This is how i have done it:

CREATE MASTER KEY ENCRYPTION BY PASSWORD = 'test@#56'

GO

-- CREATE CERTIFICATE PRINCIPAL_CERT

CREATE CERTIFICATE PRINCIPAL_CERT

WITH SUBJECT = 'PRINCIPAL CERTIFICATE',

START_DATE = '03/07/2006',

EXPIRY_DATE = '01/01/2010'

GO

-- CREATE ENDPOINT NAMED (EPMIRRORING) USING CERTIFICATE AND ALGORITHM

CREATE ENDPOINT EPMIRRORING

STATE = STARTED

AS TCP(LISTENER_PORT = 6025, LISTENER_IP = ALL)

FOR DATA_MIRRORING (ENCRYPTION = REQUIRED ALGORITHM RC4, ROLE = ALL,

AUTHENTICATION = CERTIFICATE PRINCIPAL_CERT)

GO

Here is the of Event Log.

Date,Source,Severity,Message
08/03/2006 15:54:35,spid52,Unknown,The Database Mirroring protocol transport is now listening for connections.
08/03/2006 15:54:35,spid52,Unknown,Server is listening on [ 'any' <ipv4> 5122].
08/03/2006 15:52:57,spid53,Unknown,The Database Mirroring protocol transport is disabled or not configured.
08/03/2006 15:52:55,spid53,Unknown,The Database Mirroring protocol transport has stopped listening for connections.
08/03/2006 14:14:54,spid52,Unknown,The Database Mirroring protocol transport is now listening for connections.
08/03/2006 14:14:54,spid52,Unknown,Server is listening on [ 'any' <ipv4> 5122].
08/03/2006 14:14:37,spid53,Unknown,The Database Mirroring protocol transport is disabled or not configured.
08/03/2006 14:14:35,spid53,Unknown,The Database Mirroring protocol transport has stopped listening for connections.
08/03/2006 14:03:48,Logon,Unknown,Database Mirroring login attempt failed with error: 'Connection handshake failed. There is no compatible authentication protocol. State 21.'. [CLIENT: 10.10.1.12]
08/03/2006 14:03:46,Logon,Unknown,Database Mirroring login attempt failed with error: 'Connection handshake failed. There is no compatible authentication protocol. State 21.'. [CLIENT: 10.10.1.12]
08/03/2006 14:03:43,Logon,Unknown,Database Mirroring login attempt failed with error: 'Connection handshake failed. There is no compatible authentication protocol. State 21.'. [CLIENT: 10.10.1.12]
08/03/2006 14:03:41,Logon,Unknown,Database Mirroring login attempt failed with error: 'Connection handshake failed. There is no compatible authentication protocol. State 21.'. [CLIENT: 10.10.1.12]
08/03/2006 14:03:38,Logon,Unknown,Database Mirroring login attempt failed with error: 'Connection handshake failed. There is no compatible authentication protocol. State 21.'. [CLIENT: 10.10.1.12]
08/03/2006 14:03:36,Logon,Unknown,Database Mirroring login attempt failed with error: 'Connection handshake failed. There is no compatible authentication protocol. State 21.'. [CLIENT: 10.10.1.12]
08/03/2006 14:03:34,Logon,Unknown,Database Mirroring login attempt failed with error: 'Connection handshake failed. There is no compatible authentication protocol. State 21.'. [CLIENT: 10.10.1.12]
08/03/2006 14:03:33,Logon,Unknown,Database Mirroring login attempt failed with error: 'Connection handshake failed. There is no compatible authentication protocol. State 21.'. [CLIENT: 10.10.1.12]
08/03/2006 14:03:32,Logon,Unknown,Database Mirroring login attempt failed with error: 'Connection handshake failed. There is no compatible authentication protocol. State 21.'. [CLIENT: 10.10.1.12]
08/03/2006 14:03:30,Logon,Unknown,Database Mirroring login attempt failed with error: 'Connection handshake failed. There is no compatible authentication protocol. State 21.'. [CLIENT: 10.10.1.12]
08/03/2006 14:03:15,spid54,Unknown,The Database Mirroring protocol transport is now listening for connections.
08/03/2006 14:03:15,spid54,Unknown,Server is listening on [ 'any' <ipv4> 5022].

Any solution ?
Thanks
Mihir

View 5 Replies


ADVERTISEMENT

Database Mirroring Transport Is Disabled In The Endpoint Configuration.

Oct 16, 2007



Hi,

i have configured a mirroring database using three different server instances on same domain. i'm able to configure the principal, mirror and witness using the configure database mirroring security wizard. I leave the service accounts blank and complete the process successfully but when i hit on start mirroring button it gives me error i.e 'database Mirroring Transport is disabled in the endpoint configuration.' Kindly help.

Regards

View 3 Replies View Related

The SQL Server Service Broker Or Database Mirroring Transport Is Disabled Or Not Configured

Jul 13, 2007

Hi,



I received an alert 'The SQL Server Service Broker or Database Mirroring transport is disabled or not configured'



How can I check the status of the two? and if they are disabled how do I enable them?

View 6 Replies View Related

Database Mirroring Transport Error

May 24, 2006

Hi

I am trying to configure Database Mirroring. I had do set dbcc traceon(1400,-1) manually using tsql as the server does not start when configring the startup parameter using the advanced properties of sql server configuration using -T 1400.

After using the db-mirror properties and the wizard in management studio i get an error "database mirroring transport is disabled in the endpoint configuration". I also get this error when executing

alter database set partner="..."

Am I missing something?

Thanks

View 1 Replies View Related

Recovery :: Database Mirroring Endpoint Cannot Listen For Connections Due To Error - 10049

Jul 5, 2015

I am getting the following error when creating a endpoint (that will be used for allwayson) The Database Mirroring endpoint cannot listen for connections due to the following error: '10049(The requested address is not valid in its context.)'.

My physical network card is configured with:

10.9.255.170

and iam creating my endpoint with 10.9.255.82

The creation of endpoint is being done with;

CREATE ENDPOINT [Hadr_endpoint]
AS TCP (LISTENER_PORT = 5022, LISTENER_IP = (10.9.255.82)
FOR DATA_MIRRORING (ROLE = ALL, ENCRYPTION = REQUIRED ALGORITHM AES)
GO
IF (SELECT state FROM sys.endpoints WHERE name = N'Hadr_endpoint') <> 0
BEGIN
ALTER ENDPOINT [Hadr_endpoint] STATE = STARTED
END
GO
use [master]
GO
GRANT CONNECT ON ENDPOINT::[Hadr_endpoint] TO [account]
GO

View 8 Replies View Related

SQL 2012 :: Service Broker Endpoint Is In Disabled Or Stopped State

May 5, 2014

I have a SQL 2012 Enterprise edition HADR cluster with 2 nodes and my event log on the second node (current primary for the AG) is being filled with these messages

The Service Broker endpoint is in disabled or stopped state

I wasn't able to find too much on the issue. I did find this one open Microsoft connect bug report from back in April 2013 [URL] .....

O/S: Windows 2012
SQL Server 2012 v11.0.3412
Currently 1 AG with 1 DB

View 3 Replies View Related

Safety Of Using .NET Static Members As Configuration Transport.

Jan 4, 2008

Situation:
We have a backend system which stores our configuration data. In order to pull configuration information from this system our components need to have access to three pieces of data: application name, module name, and the variable to pull.

This same system allows us to log various events. It serves as a central point of configuration, maintenance and monitoring for all of our environments.

Desired Outcome:
We'd like to create a connection manager, log provider, and task "finalizer." We'd like to initialize the variables named above in one location and have all created components pull their required information from that one location.

Assumptions:
* Custom configuration managers are not possible.
* Custom connection managers and logging providers do not have access to the package variables.
* Custom tasks have access to the package variables.


Problems:
Logging Provider: The logging provider does not have access to the package level variables. The only variable that appears to be supported is ConfigString. Currently our component allows configuration of the required data using a "Variable::Variable" format in the ConfigString. We want the logging provider to pull its config data from elsewhere.

Connection Manager: The connection manager does not appear to have access to package level variables. The UI for configuring the connection manager does have access (through the IDtsVariableService). Our current component requires the designer to enter the required data into the component.

We're looking to expand our components to include further integration into our backend. We'd like to resolve the issue of components not having access to the package level variables.


Probed Solutions:
Custom Package Executable: Created as a replacement for DTExec. This fails because we have situations where we may need to run jobs via SQLAgent. Loaded the package, set all the variables and components properly, then executed.

Manual Initialization: Configure each component separately. This fails because we'd like to have a single point of maintenance for these configuration variables.


DTSTask and Static Variables: The heart of this post.

We have created a DTSTask that exists as the first item in the Control Flow and which configures the package level variables and a set of static variables. By "static variables" I refer to the following:


public static class DataStore
{

public static string ApplicationName;
public static string ModuleName;
}

Our components are all capable of accessing these static variables and everything functions wonderfully. (The variables are WORM; the above structure is not what I'm using as I'm aware that SSIS is multi threaded and all appropriate access controls should be used.)

There are concerns over the lifetime of these variables. We depend on the initial task to set these variables; a type constructor is unable to initialize them for us. Static variables are tightly tied to the lifetime of the AppDomain, so I have the following questions:

1. Are AppDomains reused by SSIS? (Is there a chance that a previously configured static variable will be used by a second package?) Research I've done indicates that the SSIS runtime exists in the context of the executing assembly so with DTExec or DTExecUI I'm confident that the AppDomain is not recycled; however, I'm unsure as to the answer in terms of jobs launched by SQLAgent.
2. Are AppDomains ever dynamically created by the SSIS runtime? I know that dynamic creation of AppDomains is explicitly forbidden by the SQL Server 2005 CLR implementation, but I'm not sure about the SSIS runtime. Research has seemed to indicate (but never explicitly state) that this is not done by the current implementation of SSIS.

3. What effect, if any, does "execute out of context" have on static variables? Research has indicated that as long as the package being executed has the appropriate task as the first item that the impact is nil.

Thank you for reading this question, and thank you in advance for any input or comments you may have.
--bms

View 6 Replies View Related

SQL 2012 :: Mirroring Endpoint Multiple Instances On Same Server

Jun 18, 2014

I was told that if I wanted to setup mirroring between multiple instance on the same server that each endpoint had to be different number. Is that true? Or can I use the default 5022 for each instance?

Ex.

Server1Instance1
Use endpoint 5022

Server1Instance2
Use endpoint 5022

VS

Server1Instance1
Use endpoint 5022

Server1Instance2
Use endpoint 5023

View 4 Replies View Related

Mirroring :: Unable To Drop Endpoint With Name Mirror Server

Jul 16, 2015

I have created a Endpoint with "Mirroring Server" on the mirroring instance. Due to the keyword server i am not able to drop the endpoint now.

Also am not able to configure a mirror in a windows workgroup also( the two systems principal and mirror are under same network ). I have followed many ways as per msdn articles and other blogs.

I am not able to connect to the mirror server. 

I have tried giving the ip addr and the port no, also the computer name:port no, computername.local:port no etc. Both the systems are running on sql server 2008 only

I always get the error as Connection cannot be established to the destination.

(I have also enabled the ports in firewall by creating inbound and outbound rules)

The issue probably lies in NAMING server address i guess.

View 2 Replies View Related

Kerberos Issue With An Endpoint In SQL 2005 In Cluster Configuration

Oct 17, 2007

Hi all,

I have an issue with an SQL cluster.

I have two MS Windows 2003 Server Ent Ed. SP2 in cluster. They have MS SQL Server 2005 in cluster.

I have created and endpoint and when I try to access I get the attached error in client machine. This problem only occurs in cluster configuration, because the same installation in an SQL (no cluster) works fine.

EventID: 4 Source: Kerberos
The kerberos client received a KRB_AP_ERR_MODIFIED error from the server host/fra-lille-hel03.ea.holcim.net. This indicates that the password used to encrypt the kerberos service ticket is different than that on the target server. Commonly, this is due to identically named machine accounts in the target realm (EA.HOLCIM.NET), and the client realm. Please contact your system administrator.

Anybody knows how to solve it?

Thanks in advanced.

View 1 Replies View Related

Database Mirroring | Can Witness Live On Mirroring Server?

May 3, 2008



Server A = primary SQL DBs (mirroring origination)
Server B = failover SQL DBs (mirroring destination)

For database mirroring a witness is required.
Can the witness live in another instance of SQL on server B?

View 7 Replies View Related

Transport Database From One PC To Another

Dec 22, 2006

What is the best way to transport a complete database (including tables and stored procedures) to another PC?

View 2 Replies View Related

How To Transport A Database In SQL 2000 To 2005

Oct 21, 2007

How do I take a database developed and operating and get into the 2005 SQL Server?

View 4 Replies View Related

Mirroring :: Database Mirroring Changes In Application

Oct 12, 2015

Using SQL Server 2008, we would like propose mirroring between two servers of a critical database. Since we initiate, may require to clarify on its purpose and also required changes from application end.Any changes required from OS Level? (I believe both servers IP or Host name should be added in host entries. Mirroring ports should be allowed/open including Principal and mirror server IP Addresses): Windows Team.Any changes required from Application? (Instance name, authentication: user name and its password should be added in web config files): Application Team.Any changes required from Network Team?Also for mirroring both the principal and mirror servers should be with same version, does it only mean SQL Server 2008 versions are enough or does it also mean to say build numbers 10.00.4000 should also be same.URL....

View 5 Replies View Related

How To Monitor Failed Sql Server 2005 Jobs When Database Mail Is Disabled

Sep 14, 2007


We have our SQL Server 2005 hosted at a datacenter and have only SS Management Studio access (no term serv, no event log, etc.). Also, our hosting company has disabled the Database Mail feature. We have over 60 jobs running on a minute/hourly/daily basis that are critical for our business. It is super important for us to know if and when a job failed.

Given this scenario, how do you suggest we implement monitoring/notification of failed jobs?

View 10 Replies View Related

SQL 2012 :: Database Mirroring And NT Authority Account For Database Engine?

Dec 2, 2014

I have just finished configuring my first test mirrored environment (High safety mode). I setup the database engine service accounts on each of the servers with domainuser. I inherited a production mirrored environment set up by someone else. On the production servers the database engine service account is NT Authorityuser a local account. I am trying to practice installing Windows updates within a mirrored environment and I not sure how to proceed when the service account is NT Authority user account. should I change the service account to a domainuser?

View 2 Replies View Related

The Database Is Being Closed Before Database Mirroring Is Fully Initialized

Jun 12, 2007

When I issue this command:


ALTER DATABASE foo set PARTNER = 'TCP://10.3.3.1:1234'
I get this error message:




The database is being closed before database mirroring is fully initialized. The ALTER DATABASE command failed.
What does that mean, and how do I fix it?

View 8 Replies View Related

Database Mirroring Hangs On ALTER DATABASE SET PARTNER

Jun 26, 2005

Hi,

View 6 Replies View Related

Database Mirroring Monitor Not Working For One Database

Apr 2, 2008

I set up a new mirror server. Everything is good except that the Database Mirroring Monitor is not working for one of the databases. In the monitor the principal data is showing up as blank

If I look at dbm_monitor_data on the principal most of the data columns (e.g. Send_queue_size) are null where as they have data for the other databases.


Both servers are SQL Server 9.0.2047 Enterprise Edition.


Any idea what might be going on here?


Thanks in advance.

View 3 Replies View Related

Database Mirroring

Oct 12, 2007

Hi All,

Does anybody know the OS requirements for Database Mirroring? I checked BOL and Google but couldn't find any info on that.

Thanks.

View 5 Replies View Related

Database Mirroring

Feb 27, 2008

Hi All,

I have read on the web that high protection mode not recommended, except in the event of replacing the existing witness server. But I can't find the reason why anywhere. Can anybody explain? Thanks.

View 2 Replies View Related

Database Mirroring

Mar 12, 2008

Hi All,

Couple of questions about database mirroing.

1. Once the mirroring is setup is it possible to switch between high-protection and high-performance modes? If it is will I have to stop the mirroring, switch the modes and then restart it again?

2. Let's say the principal server went down and I manually failed over to the mirror server. Mirror server runs as a new principal server for a couple of days and then I bring the original principal server back up. What needs to be done in order to bring transactions on the principal server up to date?

Thanks.

View 1 Replies View Related

Database Mirroring

Mar 15, 2007

for a database mirroring , which stretergy is good.
Creating with witness server or without it.?

I am firsttime doing this , so i am posting it to the forum..

and also if we are creating the database mirroring with witness server for automatic failover , will the witness server need the same amount of harddisk space like the pricipal or mirror server.??

thanks

View 2 Replies View Related

Database Mirroring

Jul 30, 2007

we want to migrate our production server , without taking the database down.so what we did was , we mirrored the databases from production to one of our development servers and we took the prodcution server for uprgrade.

so today we are moving back (mirroring) all the databases from that development server to our new production server.

my question is , when i move

productionserver_old(principal server) - having the script for principal server

development server(mirror server---->principalserver)) - having the script for mirror server , which is now acting as principal server

new production server(mirror server) - having the script for mirror server. will become principal server , once i moved all the databases

now while mirroring between the developement server and the new production server, i have to run the scripts for the mirror server only.

so both the servers are havign the mirror script now...

is that a problem, or any other way i can handle this....

View 12 Replies View Related

Database Mirroring

Mar 21, 2008

Hi All,

Does anybody know any good Tutorials for Database Mirroring (Automatic Failover) or Manual Sync with Mirror Server. I tried some sites online, but doesn't have detailed steps..
pls.help as i need to sync data with One of my Mirror using Sql Server 2005.

thanks

View 2 Replies View Related

Database Mirroring

Mar 14, 2008

Hi,

I have some questions about database mirroring. we have almost 40 databases in one server. Can I set up the database mirroring for all the databases. Is it going to any affect on performance. we have already setup the mirroring on almost 30 databases, and I need to set up for the rest of 10. please some body could help on this. Thank you.

View 3 Replies View Related

Mirroring Between Two Database

Jul 7, 2006

Hi,
i'm a novice of sql server and I have a problem.
I have to reply a server in which there are database that are managed with sql server 2000 sp3; what I must make in order to set up the mirroring between the database of the two server so that the data are always aligned ?

thanks for the attention
best regards

alessandro

View 3 Replies View Related

Database Mirroring

Apr 18, 2007

I am new user of SQl and preparing the exam database mirroring....can you tell me how i start the mirroirng ..what is my first tep..and is there only one instance

View 3 Replies View Related

Database Mirroring

Mar 12, 2008

Hi All,

Couple of questions about database mirroing.

1. Once the mirroring is setup is it possible to switch between high-protection and high-performance modes? If it is will I have to stop the mirroring, switch the modes and then restart it again?


2. Let's say the principal server went down and I manually failed over to the mirror server. Mirror server runs as a new principal server for a couple of days and then I bring the original principal server back up. What needs to be done in order to bring transactions on the principal server up to date?


Thank you.

View 6 Replies View Related

Database Mirroring

Jan 4, 2008



Can we have database mirroring for two databases. Like i have an application where in the db used are two, namely DB1 and DB2, DB1 is used in the connection string and with the help of DB1 the tables and sps of DB2 are handled.

in this case can i go ahead with database mirroring. Please comment and give the idea or link on the same.

View 1 Replies View Related

Database Mirroring

Oct 25, 2006

Hi,

Is there a way to automatically mirror/backup a SQL Express database with a SQL Server 2005 licenced system?

They will be on seperate machines on the internet.

I have done manual backup and restores but would like to allow constant updates to allow both databases to be synchronized.

I read that the SQL Server 2005 version has a mirroring facility but I also read that this is not possible in the Express version.

What other (automated) options do I have?

Thanks Andrew

View 1 Replies View Related

Database Device Mirroring !!!

Jan 30, 2002

Hello Everybody ..

Can anyone help me with some information or procedure as to how to mirror database devices in SQL Server 7.0 & SQL 2000 servers ?

SQL Server 6.5 has mirror utility built in the Enterprise manager .
Is there any way to do it on SQL 7.0 and SQL 2000 Servers ?

Any help will be appreciated .

Many thanks
Yatin.

View 1 Replies View Related

Database Mirroring Testing

Mar 23, 2007

what are the different testing we can do for the database mirroring with witness and without witness ??

thanks

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved