MS SQL Server :: DbComms Error Occurred While Reading Input. Context Read Packet Header. Unexpected End Of Stream...

DB Engine :: Error Occurred While Reading Input Stream From Network?

Aug 2, 2012

I am facing this error in SQL server error logs on my activepassive Cluster set around 10-20 times per day.

Edition : SQLserver2008R2 Enterprise edition
SQL SP: SP1
Windows : 2008R2 Enterprise windows

2012-07-30 04:44:15.560 A fatal error occurred while reading the input stream from the network. The session will be terminated (input error: 10054, output error: 0).

View 12 Replies View Related

The DBComms.receive Operation Resulted In An Invalid Packet Header Type:-86. PktNum:0. NReceived:8.

Jun 11, 2007

Hello,

While doing performance testing on a Tomcat based web application using the v1.1 JDBC driver connecting to SQL Server 2005, the tomcat server has been throwing the above exception at a fairly low rate. I have seen some related issues in the forums with v1.1 of the MS JDBC driver, but those were asking about connection reset related errors. In this case the 'invalid packet header' exception is consistently seen. I am in the process of repeating the test with some additional application side logging turned on, and have tried enabling FINEST level logging for the driver, but that leaves me with a 500MB log file and so far no instances of that exception in question being thrown. This is not unusual, the error has only been seen about 14 times in about 20 tests, with each test running about an hour and a half.

A few quick tests with the 1.2 driver did not throw this exception, but did throw a high number of '[Connection|Statement|Resultset] Closed'

While I gather more information, I was wondering if there is anything significant in this particular exception type that could point to a more specific set of tests I could run?

The exceptions seen so far:

Exception #1:

java.lang.NullPointerException
at com.microsoft.sqlserver.jdbc.DBComms.receive(Unknown Source)
at com.microsoft.sqlserver.jdbc.DBComms.receive(Unknown Source)
at
com.microsoft.sqlserver.jdbc.SQLServerStatement.doCloseServerCursor(Unknown
Source)
at
com.microsoft.sqlserver.jdbc.SQLServerStatement$CloseServerCursorRequest.execute(Unknown
Source)
at
com.microsoft.sqlserver.jdbc.SQLServerConnection.executeRequest(Unknown Source)
at
com.microsoft.sqlserver.jdbc.SQLServerStatement.closeServerCursor(Unknown
Source)
at com.microsoft.sqlserver.jdbc.SQLServerResultSet.close(Unknown
Source)
at com.X.db.CSInternalDB.close(CSInternalDB.java:950)
at com.X.db.CSQuery.close(CSQuery.java:169)
at
com.X.container.ContainerManager.getFolderContent(ContainerManager.java:1313)
at
com.X.container.ContainerCommands.getContent(ContainerCommands.java:1086)
at
com.X.container.ContainerCommands.execCommand(ContainerCommands.java:192)
at
com.X.BaseHandler.getObjectFromDoc(BaseHandler.java:169)
at com.X.BaseHandler.processDOM(BaseHandler.java:284)
at com.X.Dispatcher.execIt(Dispatcher.java:546)
at com.X.Dispatcher.execCommand(Dispatcher.java:333)
at
com.X.BaseHandler.getObjectFromDoc(BaseHandler.java:169)
at com.X.X.execute(X.java:600)
at com.X.HttpReceiver.doRequest(HttpReceiver.java:275)
at com.X.HttpReceiver.doGet(HttpReceiver.java:181)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:689)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
at
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
at
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
at
org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
at
org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)
at
org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)
at
org.apache.catalina.cluster.tcp.ReplicationValve.invoke(ReplicationValve.java:346)
at
org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)
at
org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)
at
org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)
at
org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:869)
at
org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:664)
at
org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527)
at
org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:80)
at
org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)
at java.lang.Thread.run(Unknown Source)

#2:

java.sql.SQLException: The DBComms.receive operation resulted in an invalid
packet header type:-86. PktNum:0. nReceived:8.
at
com.X.db.CSPreparedStatement.executeQuery(CSPreparedStatement.java:474)
at com.X.db.CSAnalyzer.executeQuery(CSAnalyzer.java:485)
at com.X.db.CSQuery.sqlPrepareExecute(CSQuery.java:559)
at
com.X.form.FormManager.getInternalFormProps(FormManager.java:1803)
at
com.X.form.FormManager.getInternalFormProps(FormManager.java:1762)
at
com.X.route.RoutingCommands.genericPrepareRoutingPage(RoutingCommands.java:5618)
at
com.X.route.RoutingCommands.prepareRoutingPage(RoutingCommands.java:3899)
at sun.reflect.GeneratedMethodAccessor75.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at
com.X.iplugin.DynamicCommandMethod.execute(DynamicCommandMethod.java:35)
at
com.X.route.RoutingCommands.execCommand(RoutingCommands.java:209)
at
com.X.BaseHandler.getObjectFromDoc(BaseHandler.java:169)
at com.X.BaseHandler.processDOM(BaseHandler.java:284)
at com.X.Dispatcher.execIt(Dispatcher.java:546)
at com.X.Dispatcher.execCommand(Dispatcher.java:333)
at
com.X.BaseHandler.getObjectFromDoc(BaseHandler.java:169)
at com.X.X.execute(X.java:600)
at com.X.HttpReceiver.doRequest(HttpReceiver.java:275)
at com.X.HttpReceiver.doGet(HttpReceiver.java:181)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:689)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
at
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
at
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
at
org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
at
org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)
at
org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)
at
org.apache.catalina.cluster.tcp.ReplicationValve.invoke(ReplicationValve.java:346)
at
org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)
at
org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)
at
org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)
at
org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:869)
at
org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:664)
at
org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527)
at
org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:80)
at
org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)
at java.lang.Thread.run(Unknown Source)

View 3 Replies View Related

An Unexpected Error Occurred File 'mddiscretizer.cpp'

Jul 9, 2007

Hey guys,

I'm not sure if this one should be addresses to the data mining team or the analysis services team, but I first encountered this error while attempting to process a Naive Bayes mining model that has a column with only a couple of distinct values in it. I set the discretization method for the column to clusters and then tried to process the model. The processing completed with failures and complained that the column had too few distinct values to apply the selected discretization.

I have now also noticed that when I attempt to process an OLAP cube that has the same column as a measure group in it the cube processing fails with the following error:

[Analysis Services Execute DDL Task] Error: Internal error: An unexpected error occurred (file 'mddiscretizer.cpp', line 1532, function 'MDDiscretizer::GetBucketForValue').

Any thoughts on this one?

View 4 Replies View Related

An Exception Occurred During The DBComms.receive Method.

Aug 29, 2007

I am getting SQLException when I connect SQL Server 2005. I would like to know how to correct this problem.
I get this error randomly. Never seenit before. Sometimes I get this error one day later from application begins, sometimes two days later, sometimes 3 day later.

DBCP borrowObject failed: com.microsoft.sqlserver.jdbc.SQLServerException: An exception occurred during the DBComms.receive method. Operation:Connection reset. Context841) [Thread[http-8080-Processor18,5,main], IO:457d2, Dbc:1a642]. PktNum:0. TotalReceived:0. PktSize:4,096.
org.apache.commons.dbcp.DbcpException: com.microsoft.sqlserver.jdbc.SQLServerException: An exception occurred during the DBComms.receive method. Operation:Connection reset. Context841) [Thread[http-8080-Processor18,5,main], IO:457d2, Dbc:1a642]. PktNum:0. TotalReceived:0. PktSize:4,096.
at org.apache.commons.dbcp.DriverConnectionFactory.createConnection(DriverConnectionFactory.java:85)
at org.apache.commons.dbcp.PoolableConnectionFactory.makeObject(PoolableConnectionFactory.java:184)
at org.apache.commons.pool.impl.GenericObjectPool.borrowObject(Unknown Source)
at org.apache.commons.dbcp.AbandonedObjectPool.borrowObject(AbandonedObjectPool.java:117)
at org.apache.commons.dbcp.PoolingDataSource.getConnection(PoolingDataSource.java:110)
at org.apache.commons.dbcp.BasicDataSource.getConnection(BasicDataSource.java:312)
at org.apache.struts.util.GenericDataSource.getConnection(GenericDataSource.java:276)
at com.y.util.DbAccess.getConnection(DbAccess.java:29)
at com.y.biz.UserMgr.leftDays(UserMgr.java:404)
at com.y.action.LoginAction.login(LoginAction.java:194)
at sun.reflect.GeneratedMethodAccessor303.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at org.apache.struts.actions.DispatchAction.dispatchMethod(DispatchAction.java:280)
at org.apache.struts.actions.DispatchAction.execute(DispatchAction.java:220)
at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:446)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:266)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1292)
at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:510)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:709)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:237)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:214)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:198)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:152)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:137)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:118)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:929)
at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:160)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:799)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:705)
at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:577)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)
at java.lang.Thread.run(Thread.java:534)
Caused by: com.microsoft.sqlserver.jdbc.SQLServerException: An exception occurred during the DBComms.receive method. Operation:Connection reset. Context841) [Thread[http-8080-Processor18,5,main], IO:457d2, Dbc:1a642]. PktNum:0. TotalReceived:0. PktSize:4,096.
at com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDriverError(Unknown Source)
at com.microsoft.sqlserver.jdbc.DBComms.receive(Unknown Source)
at com.microsoft.sqlserver.jdbc.IOBuffer.sendCommand(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.changeSettings(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.logon(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.connect(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerDriver.connect(Unknown Source)
at org.apache.commons.dbcp.DriverConnectionFactory.createConnection(DriverConnectionFactory.java:83)
... 44 more

Web Server:
CPU 2*1.66G, 4GB ram, 146GB
Windows 2003 Server
JDK 1.4.2
Tomcat 5.0
Driver Name: Microsoft SQL Server 2005 JDBC Driver

JDBC Driver Version 1.0
Use struts connection pool in application.

Database Server:
CPU 2*1.66G, 4GB ram, 4 x 146GB
Windows 2003 Server
SQL Server 2005, Product Version: 9.00.1399

View 6 Replies View Related

The Underlying Connection Was Closed: An Unexpected Error Occurred On A Receive. Endpoint Error

Mar 28, 2007

what can cause the above error when connecting to an endpoint via a c# app? the app, and sql are both on my machine ( im just doing this for test purposes and to learn something new.)

View 1 Replies View Related

Internal Error: An Unexpected Error Occurred In Analysis Services Processing

Apr 8, 2008

Hi There,

I've got this error coming up while running the sql job for AS processing. I can't find anything about it on google or anywhere else. Has anyone had issues like this?

Code Snippet
Executed as user: xyzsvc_sqlsvr. Microsoft (R) SQL Server Execute Package Utility Version 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 1:21:02 PM Error: 2008-04-04 13:21:07.41 Code: 0xC1000000 Source: Analysis Services Processing Task Analysis Services Execute DDL Task Description: Internal error: An unexpected error occurred (file 'mdprocessdim.cpp', line 3429, function 'MDProcessPropertyJob::OnLaunch'). End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 1:21:02 PM Finished: 1:21:07 PM Elapsed: 5.141 seconds. The package execution failed. The step failed.

Thanks

Vivek

View 5 Replies View Related

Large Reports - Error: The Underlying Connection Was Closed: An Unexpected Error Occurred On A Receive.

Mar 13, 2008

First off I understand that it is a horrible idea to run extremely large/long running reports, but sometimes it ends up being the best possible solution due to external forces.

I've got a 25,000 page report that we recently converted from crystal reports to SSRS. The SSRS server is a 64bit 2003 server with 32 gigs of ram running SSRS 2005. When running the report through the report manager web application, it renders in the browser/viewer after about 12 minutes. Exporting to pdf through the browser/viewer in the report manager takes an additional 55 minutes. It does work and it produces a whopping 1.03gb pdf.

Unfortunately, I've run into a problem when trying to do this from a console application using the SSRS client API. After about 30-35 minutes I get an exception on the client with the following error:
Exception Message: The underlying connection was closed: An unexpected error occurred on a receive.
InnerException = Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host.

Here is the api call:

Code Snippet

byte[] m_data = reportingService.Render(this.ReportPath, this.ExportFormat, null,
deviceInfo, selectedParameters, null, null, out encoding, out m_mimeType,

out usedParameters, out warnings, out streamIds);
Here are some things I've tried so far:

set the HttpRuntime ExecutionTimeout value to 3 hours on the report server
disabled http keep alives on the report server
increased the script timeout on the report server
set the report to never time out on the server
set the report timeout to several hours on the client call
Disabled antivirus on the client side, and verified there was no antivirus running on the reporting server.
Tried using default credentials in the ReportingService object as opposed to supplying credentailsAny ideas would be appreciated. I understand the best solution is to split the report up into smaller reports, which is the backup option, but being able to keep it as one report is the goal.

View 1 Replies View Related

An Unexpected Error Occurred While Connecting To The Report Server.

Mar 12, 2007

I have a distributed environment with SQL Server 2005 SP2 (RTM) running on one server. This server holds the databases for SharePoint and Reporting Services. I then have SharePoint 3.0 (32-bit version) with the reporting services add-in installed on a second server. I installed the sharepoint object model (64-bit version) on the database server as suggested and have configured Reporting Services to use domain user accounts. The Reporting Services configuration tool is reporting that integration has been successfully set up but I am unable to access the "Set Server Defaults" page without an error. This is the error I receive:

An unexpected error occurred while connecting to the report server. Verify that the report server is available and configured for SharePoint integrated mode.

Please help.

View 8 Replies View Related

Can No Longer Access Report Manager - The Underlying Connection Was Closed: An Unexpected Error Occurred On A Receive.

Apr 11, 2008

Hi,

For a long time I've had SQL Server 2000 with RS on a Server2003 machine.
When I want to publish a report from my Dev box, I remove anon. access on the Production machine, deploy the report, then go into report manager to tweak a couple of parameters. I then re-enable anon. access so users can continue.

Yesterday, I removed anon. access and deployed the report but when I went into Report Manager I received the above error message... "The underlying connection was closed: An unexpected error occurred on a receive."

I can get into report manager with anonymous access enabled, but I don't have authority to do anything.

What's happened!!!? More importantly, how do I fix it?

View 8 Replies View Related

Read Text File From SQL Server, Read Its Content, And Load It In RichTextBox (Related Component: Context.Response.BinaryWrite(), And StreamReader)

Nov 26, 2007

OBJECTIVE: I would like to read a text file from SQL Server 2000, read the text file content, and load its conntents in a RichTextBoxTHINGS I'VE DONE AND HAVE WORKING:1) I've successfully load a text file (ex: textFile.txt) in sql server database table column (with datatype Image) 2) I've also able to load the file using a Handler as below: using System;using System.Web;using System.Data.SqlClient;public class HandlerImage : IHttpHandler {string connectionString;public void ProcessRequest (HttpContext context) {connectionString = System.Configuration.ConfigurationManager.ConnectionStrings["NWS_ScheduleSQL2000"].ConnectionString;int ImageID = Convert.ToInt32(context.Request.QueryString["id"]);SqlConnection myConnection = new SqlConnection(connectionString);string Command = "SELECT [Image], Image_Type FROM Images WHERE Image_Id=@Image_Id";SqlCommand cmd = new SqlCommand(Command, myConnection);cmd.Parameters.Add("@Image_Id", System.Data.SqlDbType.Int).Value = ImageID;SqlDataReader dr;myConnection.Open(); cmd.Prepare(); dr = cmd.ExecuteReader();if (dr.Read()){ //WRITE IMAGE TO THE BROWSERcontext.Response.ContentType = dr["Image_Type"].ToString();context.Response.BinaryWrite((byte[])dr["Image"]);}myConnection.Close();}public bool IsReusable {get {return false;}}}'>'>
<a href='<%# "HandlerDocument.ashx?id=" + Eval("Doc_ID") %>'>File
</a>- Click on this link, I'll be able to download or view the file WHAT I WANT TO DO, BUT HAVE PROBLEM:- I would like to be able to read CONTENT of this file and load it in a string as belowStreamReader SR = new StreamReader()SR = File.Open("File.txt");String contentText = SR.Readline();txtBox.text = contentText;BUT THIS ONLY WORK FOR files in the server.I would like to be able to read FILE CONTENTS from SQL Server.PLEASE HELP. I really appreciate it.

View 1 Replies View Related

Length Specified In Network Packet Payload Did Not Match Number Of Bytes Read

Mar 8, 2008

Hello every one
I am getting this in my event log from time to time . not sure what is that ?
Is this a hacker trying to send rubbish data to SQL through the port ?
Any help is appreciated .

Length specified in network packet payload did not match number of bytes read; the connection has been closed. Please contact the vendor of the client library. [CLIENT: someip]

View 2 Replies View Related

SQL Server 2008 :: Length Specified In Network Packet Payload Did Not Match Number Of Bytes Read

Mar 2, 2015

Length specified in network packet payload did not match number of bytes read; the connection has been closed. Please contact the vendor of the client library. [CLIENT: xxx.xx.xxx.xx]

Client IP address is same as the server its producing the error on. I get these messages around 12pm everyday.

View 3 Replies View Related

Unzipping A Zip File-The Magic Number In GZip Header Is Not Correct.Make Sure You Are Passing In A GZip Stream.

Jan 25, 2007

I have the following code in an SSIS package and I get the following error:

Error: 0x0 at Unzip downloaded file, Boolean ReadGzipHeader(): Unable to decompress C:ETLPOSDataIngramWeeklyINVEN.zip; The magic number in GZip header is not correct. Make sure you are passing in a GZip stream.

Error: 0x4 at Unzip downloaded file: The Script returned a failure result.

Task failed: Unzip downloaded file

The zip file unzips perfectly using winzip utility, so that file is definitely not a problem here.

The code I am using in a script task is as follows:

' Microsoft SQL Server Integration Services Script Task

' Write scripts using Microsoft Visual Basic

' The ScriptMain class is the entry point of the Script Task.

Imports System

Imports System.Data

Imports System.Math

Imports Microsoft.SqlServer.Dts.Runtime

Imports System.IO

Imports System.Text

Imports System.IO.Compression

Public Class ScriptMain

' The execution engine calls this method when the task executes.

' To access the object model, use the Dts object. Connections, variables, events,

' and logging features are available as static members of the Dts class.

' Before returning from this method, set the value of Dts.TaskResult to indicate success or failure.

'

' To open Code and Text Editor Help, press F1.

' To open Object Browser, press Ctrl+Alt+J.

Public Sub Main()

'

' Add your code here

'

Dts.TaskResult = Dts.Results.Success

Dim success As Boolean = True

Dim workFilePath As String

workFilePath = Dts.Variables("zipFilePath").Value.ToString()

If File.Exists(workFilePath) Then

If Not workFilePath.EndsWith(".zip") Then

Dts.Events.FireInformation(0, "", workFilePath + " is not compressed; skipping decompression", Nothing, -1, True)

Return

End If

Dim uncompressedFileName As String

Dim bytes(Int16.MaxValue) As Byte

Dim n As Integer = 1

Try

uncompressedFileName = Dts.Variables("unCompressedFileName").Value.ToString()

Dts.Events.FireInformation(0, "", "decompressing " + workFilePath + " to " + uncompressedFileName, Nothing, -1, True)

Using writer As New FileStream(uncompressedFileName, FileMode.Create)

Using compressedStream As Stream = File.Open(workFilePath, FileMode.Open, FileAccess.Read, FileShare.None)

Using unzipper As New GZipStream(compressedStream, CompressionMode.Decompress)

Do Until n = 0

n = unzipper.Read(bytes, 0, bytes.Length)

writer.Write(bytes, 0, n)

Loop

unzipper.Close()

End Using

compressedStream.Close()

End Using

writer.Close()

End Using

Catch ex As Exception

Dts.Events.FireError(0, ex.TargetSite().ToString(), "Unable to decompress " + workFilePath + "; " + ex.Message, Nothing, -1)

success = False

Finally

If success = False And File.Exists(uncompressedFileName) Then

Dts.TaskResult = Dts.Results.Failure

File.Delete(uncompressedFileName)

End If

End Try

Else

Dts.Events.FireError(0, "", workFilePath + " does not exist", Nothing, -1)

Dts.TaskResult = Dts.Results.Failure

Return

End If

End Sub

End Class

Instead of the GZipStream do I have to use some other stream class for a zip file. Please let me know.

Thanks,

Monisha

View 9 Replies View Related

Merge Join Gives Unexpected Results When The Input Has Speacial Characters

May 14, 2007

Hi
I have a strange issue here.
Both the input datasets of the merge join are sorted . Everything works fine if the dataset doesn't contain speacial characters like - (hipen).
This is the sorted dataset.ASI311_3ASI311_3ASI312ASI311ASIKit1ASIKit1

Merge Joiner has to look for ASI311 and finds it in the list and everything works as expected. But if the dataset is changed to

ASI311_3ASI311_3ASI-312ASI311ASIKit1ASIKit1

Then it doesn't find the ASI311 in the above dataset ?
Only change between the two datasets is the - (hipen) which is added in one of the field. Does SSIS has a differenent precedence of the special characters than that of the Database. Both the datasets are on SQLServer.

Can anyone point out the issue here?

Thankyou
Vidya

View 4 Replies View Related

The Incoming Tabular Data Stream (TDS) Remote Procedure Call (RPC) Protocol Stream Is Incorrect

May 22, 2006

I've read the other posts related to this issue, but I'm just REALLY confused as to whats happening in my case. Like everyone else it was working fine in SQL 2000 but now in SQL 2005 there is an issue. I'm calling a stored procedure with parameters defined like this:

@action varchar(10),
@GLTransactionID int = NULL OUTPUT ,
@GLBatchID int = NULL ,
@GLAccountID int = NULL ,
@CurrencyID int = NULL ,
@LocalDebit decimal(28, 13) = NULL ,
@LocalCredit decimal(28, 13) = NULL ,
@BaseDebit decimal(28, 13) = NULL ,
@BaseCredit decimal(28, 13) = NULL ,
@TransID int =NULL,
@Description varchar(255) = NULL

I am calling this proc from VS.NET 2003 using the .Net SqlClient Data Povider (C#). I'm setting the values of the parameters like this:

cm.Parameters.Add("@action", "insert");
cm.Parameters.Add("@GLBatchID", _gLBatchID.DBValue);
cm.Parameters.Add("@GLAccountID", _gLAccountID.DBValue);
cm.Parameters.Add("@CurrencyID", _currencyID.DBValue);
cm.Parameters.Add("@LocalDebit", _localDebit.DBValue);
cm.Parameters.Add("@LocalCredit", _localCredit.DBValue);
cm.Parameters.Add("@BaseDebit", _baseDebit.DBValue);
cm.Parameters.Add("@BaseCredit", _baseCredit.DBValue);
cm.Parameters.Add("@TransID", _transID.DBValue);
cm.Parameters.Add("@Description", _description.DBValue);

When I execute the call to the stored proc I get this:

"The incoming tabular data stream (TDS) remote procedure call (RPC) protocol stream is incorrect. Parameter 8 ("@BaseDebit"): The supplied value is not a valid instance of data type numeric. Check the source data for invalid values. An example of an invalid value is data of numeric type with scale greater than precision."

Using the VS.NET command window I then inspect that parameter to see what the heck is going on and get this:

?cm.Parameters["@BaseDebit"].SqlDbType
Decimal
?cm.Parameters["@BaseDebit"].Precision
0
?cm.Parameters["@BaseDebit"].Scale
22
?cm.Parameters["@BaseDebit"].DbType
Decimal
?cm.Parameters["@BaseDebit"].Value
1000000
[System.Decimal]: 1000000

So I set a decmial parameter to 1,000,000, that parameter in the DB is defined as decimal(28,13) so should fit no problem, but it seems the Sql data provider is confused and thinks 1,000,000 is decimal (0,22)???

View 5 Replies View Related

The Stream Cannot Be Found. The Stream Identifier That Is Provided To An Operation Cannot Be Located In The Report Server Databa

Apr 6, 2008

I receive this error when I make a depolyment to our new server(virtual server).
The report works fine in the report manager. In my application, I use RenderStream method to retrieve the images and embed in the webform. I googled it and found some people having the same issue because of the cookie, so they set 'UseSessionCookies' = false in the table ConfiurationInfo of ReportServer database. I tried this, but no luck.

Also, there is a hotfix from Microsoft http://support.microsoft.com/kb/913363.
I have requested a copy, but not sure whehter it's gonna be helpful.

Any clues or suggestions weclome.

Thanks

View 18 Replies View Related

Reading Past CR-LF In Flat File Text Input

Jul 13, 2007

Hi,

I'm wondering if there is any way to get SSIS to notice, in the Flat File Source, that a "Ragged right" text input file has a record that is too short to populate all the specified columns.

I am reading data from a file that is supposed to be fixed length records, but record 193,591 (out of approx. 500,000) is 20 bytes short of the fixed length (60 bytes). So I changed the input to "ragged right" and found that I can thereby continue to read the file, and load the data (after setting the "maximum errors" to a number greater than the initial "1"). (Without this change to "ragged right", every record after the bad one was "out of synch" with the column arrangement -- so they never made it into the database table destination.)

But the "failures" I am now getting are during the Data Conversion step, when I try to convert some columns to integers (from text, in the input stream). And by looking at the data with a "Redirect Row" setting for the Data Conversion step, I am able to see that the Flat File Source is reading "right past the end of the row."

Is there a way to get the Flat File Source to honor the CR-LF record terminator, and decide that some text columns should contain "nothing" (NULL or zero-length strings), rather than the bytes that contain the CR-LF and the initial text from the next record? Can this somehow be noticed as an error condition?

Dan

View 12 Replies View Related

SSIS Web Service Task - SOAP Header Input

Feb 7, 2008

Hi,

In SSIS web service task - when you specify the Service and Method in the input tab for a WSDL file being used,
it seems to prompt for the parameters to be supplied only in the body of the WSDL file, and not the header.

I need to be able to provide security information (present in the SOAP header of the WSDL) like username, password etc..which is necessary to post any response to the web server, and I cannot see where I can give this in the input tab of the web service task.

Any help highly appreciated.

Thanks

View 3 Replies View Related

Protocol Error In TDS Stream

Oct 13, 2006

Hi everybody,

I dont know if this is the right place to put in this question.

The problem is

I have an application developed using VB 6.0 and SQl Server 2000. It was working fine on my machine. I had MS XP installed on my system alongwith SP1. But when i installed MS XP SP2, i got the error while saving the record.
the error is
"Protocol Error in TDS Stream".
I went to microsoft site searcing for the resolution of this error. They gave the solution of installing MDAC 2.8 SP1. But when i install MDAC 2.8, it gives me this error
"MDAC 2.8 RTM is incompatible with this version of Windows. All of its features are currently part of Windows."
And since MDAC 2.8 is not installed so i can not install MDAC 2.8 SP1 also.

I have MDAC 2.5 installed on the system.

How can i resolve it. Please give a solution as soon as possible. I am in great need of it.

View 1 Replies View Related

SQL 2005 SSIS Error - Packet Size Issue

Jan 18, 2008

Hi All...Thanks in advance for any help...

I am having an issue with SQL 2005 SSIS package...Win 2003 SP2...SQL 2005...

We receive files in the format of .TRK into an input directory...These files then are copied to a local directory on server and a .bat file loops through renaming each .TRK to MyFile.Txt...MyFile.Txt is then uploaded to a SQL table via DTS...Nothing complicated...The DTS runs fine when MyFile.Txt is placed there manually and executed...The rub is the call through batch file...

Here's the bat file...

ECHO ON

CD D:DOF

SET FromDir=D:DOFftp_in

SET ToDir=D:DOFconfirm

SET RemoteRoot=\MEMSRV079D$DOFGensrvnt

REM get files from remote server

MOVE %RemoteRoot%DOFOut*.trk D:DOFFTP_In

CD D:DOFFTP_In

FOR %%F IN (*.*) DO (

SET File=%%F

COPY %FromDir%%%F %ToDir%%%F

RENAME %%F MyFile.txt

DTSRUN /S MEMSRV079 /E /R /N "DOF_SAP_Confirm" > D:DOFLOGDOF_SAP_Confirm.run

DEL %FromDir%MyFile.txt

)

CD D:DOF

Works fine on Win2000 / SQL2000 environment but DTS had to be in MetaData, not normal...

All the copy, renames, etc in batch file work correctly...

Here's the error from DTS log...ie...The .run from above...

DTSRun: Loading...

Error: -2147217355 (80041035); Provider Error: 0 (0)

Error string: [Microsoft][ODBC SQL Server Driver]Packet size change not honored by server, server size used

Error source:

Help file:

Help context: 0

Here's my trouble shooting...Reinstall SP2 on Windows to get MDAC 2.8 version...MS KB article states that the ODBC registry key HKEY_LOCAL_MACHINESOFTWAREODBCINST.INISQLServerDriverODBCVer should be 3.7 or greater...It's 3.5 on this server...MDAC 2.8 (which is installed with Win2003 SP2) is supposed to take care of installing right driver...All registry keys point to the proper version of sqlsvr32.dll in .WindowsSystem32...

I'm at a loss...Currently we are looking at rewriting the bat file in C# or something similar...I would really like to get running as is...

Thanks in advance...

JJ

View 4 Replies View Related

SQL 2012 :: Error On Enabling File Stream

Mar 26, 2014

I am trying to enable the FileStream in SQL Server 2012 Enterprise Edition. I can successfully enable "Enable Filestream for Transact-SQL Access" but I am unable to enable "Enable Filestream for the file I/O access". Due to this I am unable to open the folder location of the filetable.

View 3 Replies View Related

SQL Server 2005 Install Error (Error 29528. Unexpected Error While Installing Performance Counters. )

Jun 12, 2007

I'm currently receiving the following error message whilst attempting to install SQL Server 2005 Standard Edition on Windows Server 2003 (32 Bit):
Error 29528. The setup has encountered an unexpected error while Installing performance counters. The error is: The system cannot find the file specified.

This server already has an install of SQL Server 2000 as the default instance. I'm attempting to install a new named instance of SQL Server 2005.

Extract from log:

<Func Name='LaunchFunction'>
Function=Do_sqlPerfmon2
<Func Name='GetCAContext'>
<EndFunc Name='GetCAContext' Return='T' GetLastError='0'>
Doing Action: Do_sqlPerfmon2
PerfTime Start: Do_sqlPerfmon2 : Tue Jun 12 10:20:02 2007
<Func Name='Do_sqlPerfmon2'>
<EndFunc Name='Do_sqlPerfmon2' Return='0' GetLastError='2'>
PerfTime Stop: Do_sqlPerfmon2 : Tue Jun 12 10:20:02 2007
MSI (s) (4C:FC) [10:20:02:833]: Executing op: ActionStart(Name=Rollback_Do_sqlPerfmon2.D20239D7_E87C_40C9_9837_E70B8D4882C2,Description=Removing performance counters,)
<EndFunc Name='LaunchFunction' Return='0' GetLastError='0'>
MSI (s) (4C:FC) [10:20:02:849]: Executing op: CustomActionSchedule(Action=Rollback_Do_sqlPerfmon2.D20239D7_E87C_40C9_9837_E70B8D4882C2,ActionType=1281,Source=BinaryData,Target=Rollback_Do_sqlPerfmon2,CustomActionData=100Removing performance counters200000DTSPipelineC:Program FilesMicrosoft SQL Server90DTSBinnDTSPERF.INI)
MSI (s) (4C:FC) [10:20:02:849]: Executing op: ActionStart(Name=Do_sqlPerfmon2.D20239D7_E87C_40C9_9837_E70B8D4882C2,Description=Installing performance counters,)
MSI (s) (4C:FC) [10:20:02:849]: Executing op: CustomActionSchedule(Action=Do_sqlPerfmon2.D20239D7_E87C_40C9_9837_E70B8D4882C2,ActionType=1025,Source=BinaryData,Target=Do_sqlPerfmon2,CustomActionData=100Installing performance counters200000C:Program FilesMicrosoft SQL Server90DTSBinnDTSPERF.INIC:Program FilesMicrosoft SQL Server90DTSBinnDTSPERF.HC:Program FilesMicrosoft SQL Server90DTSBinnDTSPipelinePerf.dllDTSPipeline0DTSPipelinePrfData_OpenPrfData_CollectPrfData_Close)
MSI (s) (4C:94) [10:20:02:864]: Invoking remote custom action. DLL: C:WINDOWSInstallerMSI1683.tmp, Entrypoint: Do_sqlPerfmon2
<Func Name='LaunchFunction'>
Function=Do_sqlPerfmon2
<Func Name='GetCAContext'>
<EndFunc Name='GetCAContext' Return='T' GetLastError='0'>
Doing Action: Do_sqlPerfmon2
PerfTime Start: Do_sqlPerfmon2 : Tue Jun 12 10:20:02 2007
<Func Name='Do_sqlPerfmon2'>
<EndFunc Name='Do_sqlPerfmon2' Return='2' GetLastError='2'>
PerfTime Stop: Do_sqlPerfmon2 : Tue Jun 12 10:20:02 2007
Gathering darwin properties for failure handling.
Error Code: 2
MSI (s) (4C!F0) [10:23:46:381]: Product: Microsoft SQL Server 2005 Integration Services -- Error 29528. The setup has encountered an unexpected error while Installing performance counters. The error is: The system cannot find the file specified.Error 29528. The setup has encountered an unexpected error while Installing performance counters. The error is: The system cannot find the file specified.

You can ignore this and it will complete the installation, but subsequently trying to patch with SP2 will fail on the same sections - Hotfix.exe crashes whilst attempting to patch Database Services, Integration Services and Client Components (3 separate crashes).

I've removed SQL Server 2005 elements and tried to re-install, but it's not improved the situation.

Any ideas?

View 3 Replies View Related

SSIS Doesn't Read All Input Rows

Sep 28, 2006

Hi *,

I'm trying to import a flat file with ~3500 rows into a SQL-DB. SSIS extracts only around half the rows. It leaves out every 2nd row. Anyone had this problem before?

Thanks!

View 1 Replies View Related

SQL Server 2008 :: Protocol Error In TDS Stream In SSIS

Nov 19, 2013

I am loading data from one server to another server using SSIS,After loading some rows i am getting the below mentioned Error.Each time i run i am getting the error in different Dataflow tasks in the package.

Error :
"
[OLE DB Source [199]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80004005 Description: "Protocol error in TDS stream".
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80004005 Description: "Protocol error in TDS stream".
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80004005 Description: "Protocol error in TDS stream".
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80004005 Description: "Protocol error in TDS stream".

[SSIS.Pipeline] Error: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED.

The PrimeOutput method on OLE DB Source returned error code 0xC0202009. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.There may be error messages posted before this with more information about the failure.".IS this SSIS package Error or Network related?

View 1 Replies View Related

Sql Server 2005 Dev Edition Error - Unexpected Error While Updating Installed Files

Feb 14, 2007

I am attempting to install SQL Server 2005 Developer Edition onto a Windows XP Pro SP2 machine, but unfortunately each time that I attempt to install I receive an error message in the summary log as follows:

Product : Microsoft SQL Server 2005
Product Version: 9.00.1399.06
Install : Failed
Log File : C:Program FilesMicrosoft SQL Server90Setup
Last Action : InstallFinalize
Error String : The setup has encountered an unexpected error while Updating Installed Files.
The error is : Fatal error during installation.
Error Number : 29528

There is probably a simple solution for the issue but unfortunately I am unaware of what it is? I can��t tell if the issue is specific to registry settings, security, file types, etc�� The information below surrounds the error w/in the log, any suggestions would be greatly appreciated?

Thanks, Jennifer

MSI (s) (6C:94) [16:02:23:713]: Executing op: SetTargetFolder(Folder=C:WINNTsystem32)
MSI (s) (6C:94) [16:02:23:713]: Executing op: SetSourceFolder(Folder=1System)
MSI (s) (6C:94) [16:02:23:713]: Executing op: FileCopy(SourceName=sqlctr90.dll,SourceCabKey=sqlctr90.dll.7188DA12_A95E_46B7_8623_9D93B5260E2A,DestName=sqlctr90.dll,Attributes=16384,FileSize=66264,PerTick=32768,,VerifyMedia=1,,,,,CheckCRC=0,Version=2005.90.1399.0,Language=1033,InstallMode=58982400,,,,,,,)
MSI (s) (6C:94) [16:02:23:713]: File: C:WINNTsystem32sqlctr90.dll; To be installed; Won't patch; No existing file
MSI (s) (6C:94) [16:02:23:713]: Source for file 'sqlctr90.dll.7188DA12_A95E_46B7_8623_9D93B5260E2A' is compressed
MSI (s) (6C:94) [16:02:23:713]: Note: 1: 2318 2: C:WINNTsystem32sqlctr90.dll
MSI (s) (6C:94) [16:02:23:713]: Note: 1: 2360
MSI (s) (6C:94) [16:02:23:713]: Note: 1: 2360
MSI (s) (6C:94) [16:02:23:723]: Executing op: CacheSizeFlush(,)
MSI (s) (6C:94) [16:02:23:723]: Executing op: InstallProtectedFiles(AllowUI=0)
MSI (s) (6C:94) [16:02:23:723]: Executing op: ActionStart(Name=CAFTEInstallFTERef.68C6D15C_77E0_11D5_8528_00C04F68155C,,)
MSI (s) (6C:94) [16:02:23:733]: Executing op: CustomActionSchedule(Action=CAFTEInstallFTERef.68C6D15C_77E0_11D5_8528_00C04F68155C,ActionType=1025,Source=BinaryData,Target=InstallFTERef,CustomActionData=C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinnFTERef|C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLFTData)
MSI (s) (6C:2C) [16:02:23:743]: Invoking remote custom action. DLL: C:WINNTInstallerMSI64E.tmp, Entrypoint: InstallFTERef
FTECa.DLL: INFO: FTE: InstallFTERef(), Entering...
FTECa.DLL: INFO: FTE: GetFTERefInstallParams: FTERef : C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLFTData
FTECa.DLL: INFO: FTE: InstallFTERef: File created: C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLFTDataoiseCHS.txt Size=1000 IDR=1696
.
.
.
.
.
.
FTECa.DLL: INFO: FTE: InstallFTERef: File created: C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLFTData sSVE.xml Size=1035 IDR=1142
FTECa.DLL: INFO: FTE: InstallFTERef: File created: C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLFTDataoiseTHA.txt Size=1036 IDR=697
FTECa.DLL: INFO: FTE: InstallFTERef: File created: C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLFTData sTHA.xml Size=1037 IDR=1142
FTECa.DLL: INFO: FTE: InstallFTERef: File created: C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLFTDataoiseTRK.txt Size=1038 IDR=2224
MSI (s) (6C:94) [16:02:24:454]: Executing op: ActionStart(Name=Rollback_UpdateETWMOFWithGUID.D20239D7_E87C_40C9_9837_E70B8D4882C2,Description=Removing registry updates,)
FTECa.DLL: INFO: FTE: InstallFTERef: File created: C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLFTData sTRK.xml Size=1039 IDR=1142
MSI (s) (6C:94) [16:02:24:454]: Executing op: CustomActionSchedule(Action=Rollback_UpdateETWMOFWithGUID.D20239D7_E87C_40C9_9837_E70B8D4882C2,ActionType=1345,Source=BinaryData,Target=Rollback_UpdateETWMOFWithGUID,CustomActionData=100Removing registry updates100000{2373A92B-1C1C-4E71-B494-5CA97F96AA19}MSSQLSERVERC:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinn)
MSI (s) (6C:94) [16:02:24:454]: Executing op: ActionStart(Name=Do_UpdateETWMOFWithGUID.D20239D7_E87C_40C9_9837_E70B8D4882C2,Description=Updating Installed Files,)
MSI (s) (6C:94) [16:02:24:454]: Executing op: CustomActionSchedule(Action=Do_UpdateETWMOFWithGUID.D20239D7_E87C_40C9_9837_E70B8D4882C2,ActionType=1025,Source=BinaryData,Target=Do_UpdateETWMOFWithGUID,CustomActionData=010Updating Installed Files100000{2373A92B-1C1C-4E71-B494-5CA97F96AA19}MSSQLSERVERC:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinn)
MSI (s) (6C:10) [16:02:24:464]: Invoking remote custom action. DLL: C:WINNTInstallerMSI64F.tmp, Entrypoint: Do_UpdateETWMOFWithGUID
<Func Name='LaunchFunction'>
Function=Do_UpdateETWMOFWithGUID
<Func Name='GetCAContext'>
<EndFunc Name='GetCAContext' Return='T' GetLastError='203'>
Doing Action: Do_UpdateETWMOFWithGUID
PerfTime Start: Do_UpdateETWMOFWithGUID : Tue Feb 13 16:02:24 2007
<Func Name='Do_UpdateETWMOFWithGUID'>
Calling installSqlEvent Trance
The arguments that are passed to InstallSqlEventTrace are InstanceName: MSSQLSERVER , ProductCodeL: {2373A92B-1C1C-4E71-B494-5CA97F96AA19} , BinPath: C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinn
INFO: Checking installed version
INFO: Writing MOF file
ERROR: Unable to open registry key: HRESULT = 0x80070005, Key = SYSTEMCurrentControlSetControlWMISecurity

The value returned is -2147024891
<EndFunc Name='Do_UpdateETWMOFWithGUID' Return='1603' GetLastError='0'>
PerfTime Stop: Do_UpdateETWMOFWithGUID : Tue Feb 13 16:02:24 2007
Gathering darwin properties for failure handling.
Error Code: 1603
MSI (s) (6C!D0) [16:02:37:273]: Product: Microsoft SQL Server 2005 -- Error 29528. The setup has encountered an unexpected error while Updating Installed Files. The error is: Fatal error during installation.

Error 29528. The setup has encountered an unexpected error while Updating Installed Files. The error is: Fatal error during installation.

<EndFunc Name='LaunchFunction' Return='1603' GetLastError='203'>
MSI (s) (6C:94) [16:02:37:283]: User policy value 'DisableRollback' is 0
MSI (s) (6C:94) [16:02:37:283]: Machine policy value 'DisableRollback' is 0
Action ended 16:02:37: InstallFinalize. Return value 3.

View 8 Replies View Related

[File System Task] Error: An Error Occurred With The Following Error Message: Access To The Path Is Denied

Sep 7, 2007

Hi -

I have an File System Task that copies a file from one directory ot another. When I hard code the target directory (c:dirfile.txt) it works fine. When I change it to a virtual directory (\serverdirfile.txt) I get a security error:

[File System Task] Error: An error occurred with the following error message: "Access to the path '\gracehbtest oS2TMM_Live_Title_000002.xml' is denied.".

Where do I change the security settings?

Thanks - Grace

View 5 Replies View Related

Exec Pkg Task: Error 0xC0202009 While Preparing To Load The Package. An OLE DB Error Has Occurred. Error Code: 0x%1!8.8X!.

Feb 21, 2007

I cannot execute a package by using Execute Package task.
I supplied sa credentials to connection manager, and it shows the list of Packages on SQL Server but when running the task it says

Error 0xC0202009 while preparing to load the package. An OLE DB error has occurred. Error code: 0x%1!8.8X!.

Any clue ?

Thanks,
Fahad

View 1 Replies View Related

An Internal Error Occurred On The Report Server. See The Error Log For More Details. RsInternal Error)

May 20, 2008

We have reports deployed in the Report Server. While connecting from client, we are getting the error
"An internal error occurred on the report server. See the error log for more details. rsInternal Error)"

Then we went to Report Server, Reporting Service and SQL Server service are all are running fine.

Important thing is some time the reports are working fine, sometimes i am receiving this error. Please help.

We predict whether the services are automatically restarted or transaction logs exceeding the limit or any other parameters to set to avaoid this error?

Please help.

View 1 Replies View Related

[XML Task] Error: An Error Occurred With The Following Error Message: There Are Multiple Root Elements.

Aug 18, 2006

I'm trying to use an XML Task to do a simple XSLT operation, but it fails with this error message:

[XML Task] Error: An error occurred with the following error message: "There are multiple root elements. Line 5, position 2.".

The source XML file validates fine and I've successfully used it as the XML Source in a data flow task to load some SQL Server tables. It has very few line breaks, so the first 5 lines are pretty long: almost 4000 characters, including 34 start-tags, 19 end-tags, and 2 empty element tags. Here's the very beginning of it:

<?xml version="1.0" encoding="UTF-8"?>
<ESDU releaselevel="2006-02" createdate="26 May 2006"><package id="1" title="_standard" shorttitle="_standard" filename="pk_stan" supplementdate="01/05/2005" supplementlevel="1"><abstract><![CDATA[This package contains the standard ESDU Series.]]></abstract>

There is only 1 ESDU root element and only 1 package element.

Of course, the XSLT stylesheet is also an XML document in its own right. I specify it directly in the XML Task:

<?xml version="1.0" encoding="UTF-8"?>

<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"/>

<xsl:template name="identity" match="@*|node()">
<xsl:copy>
<xsl:apply-templates select="@*|node()"/>
</xsl:copy>
</xsl:template>

<xsl:template match="kw">
<xsl:copy>
<xsl:apply-templates select="@*"/>
<xsl:attribute name="ihs_cats_seq" select="position()"/>
<xsl:apply-templates select="node()"/>
</xsl:copy>
</xsl:template>

</xsl:stylesheet>

Its 5th line is the first xsl:template element.

What is going on here? I do not see multiple root elements in either the XML document or the XSLT stylesheet.

Thanks!

View 5 Replies View Related

Unexpected Error

May 31, 2007

Dear All,

I'm installing SQL Server 2005 on Windows Server 2003 R2. When installing the support files for the SQL installation I receive the following error message:

"There was an unexpected failure during the setup wizard. You may review the setup logs and/or click the help button for more information"

The information I receive when clicking on the help button are as follows:
LinkID: 20476
ProductName: Microsoft SQL Server
Product Version: 9.00.1399.06
Message Source: setup.rll
Message ID: 50000
EvtType: setupsqlsetupactions.cpp@invokeS

I tried looking on the net for probable causes, but could not find any.

Anybody with answers/suggestions?

Many Thanks,

Franz

View 16 Replies View Related

BCP Giving Error "unexpected Eof"

Mar 19, 1999

Hi ,

I am trying to import a .csv file to SQL server 6.5, I get the db library error "Unexpected EOF encountered in BCP data-file"

What can be the problem with the file ?
Its very important to load this data.

Any help is appreciated.

Thanks
Ajay

View 4 Replies View Related

Unexpected Error When Open DTS

Nov 8, 2005

I created a few DTS packages in our Test Server saving them as file.dts. When I try to open them in from the production server I get an Unexpected error and the DTS is not opened. Do you have any fresh idea for me, please? Thanks!! :)

View 1 Replies View Related