I am using SQL Server 2005. I have a DB of professors and information related with them. I created the cube, it consist of:
Measures:
Measure group Professors:
Amount of projects (COUNT proj_id)
Amount of publications (COUNT pub_id)
Amount of e_books (COUNT book_id)
--------------
Measure group Projects:
Distinct amount of projects (DISTINCT COUNT proj_id)
--------------
Measure group Publications:
Distinct amount of publications (DISTINCT COUNT pub_id)
--------------
Measure group E_books:
Distinct amount of e_books (DISTINCT COUNT book_id)
Calculated measures:
Amnt_Projects
iif ([Measures].[ Amount of projects ] = 0 OR [Measures].[ Amount of projects] = NULL,0,[Measures].[ Distinct amount of projects])
Amnt_Publications
(similar to the above one)
Amnt_E_books
(similar to the above one)
---------------------------
Dimensions:
dimPROFESSORS
- prof_id
-surname
-name
-gender
dimPROJECTS
- proj_id
-type name
-name
dimPUBLICATIONS
- pub_id
-type name
-name
dimE_BOOKS
- book_id
-name
Date_Projects
-date_id
-years
Date_Publications
-date_id
-years
Date_E_books
-date_id
-years
For example, when I browse the cube:
prof_id____Amount of projects___Distinct amount of projects___Amnt_Projects
1032------------------- 30 --------------------------1----------------1
1070-------------------90 --------------------------2----------------2
1111-------------------0 ---------------------------1----------------0
1137-------------------0 ---------------------------1----------------0
1234-------------------1404--------------------------9----------------9
1721-------------------504--------------------------7----------------7
2661-------------------85 --------------------------5----------------5
...--------------------...---------------------------...----------------...
6999------------------- 20---------------------------1-----------------1
9956-------------------50---------------------------5-----------------5
Unknown----------------(empty)---------------------(empty)-----------0
Grand Total------------ 2421------------------------11-----------------11
Grand Total “11“ is the amount of distinct projects +1 (because of the unknown member). So the last column shows the right amount of projects for the professor but I want Grand Total to sum those values and show, how many projects do the professors have (it should be „59“ if for all professors). How could I get the right value to be shown in Grand Total?
I have a DB of professors and information related with them. I created the cube, it consist of: Measures: Measure group Professors: Amount of projects (COUNT proj_id) Amount of pulications (COUNT pub_id) Amount of e_books (COUNT book_id) -------------- Measure group Projects: Distinct amount of projects (DISTINCT COUNT proj_id) -------------- Measure group Publications: Distinct amount of publications (DISTINCT COUNT pub_id) -------------- Measure group E_books: Distinct amount of e_books (DISTINCT COUNT book_id) -------------- Calculated measures: Amnt_Projects iif ([Measures].[ Amount of projects ] = 0 OR [Measures].[ Amount of projects] = NULL,0,[Measures].[ Distinct amount of projects]) Amnt_Publications (similar to the above one) Amnt_E_books (similar to the above one) --------------------------- Dimensions: dimPROFESSORS - prof_id -surname -name -gender dimPROJECTS - proj_id -type name -name dimPUBLICATIONS - pub_id -type name -name dimE_BOOKS - book_id -name Date_Projects -date_id -years Date_Publications -date_id -years Date_E_books -date_id -years
For example, when I browse the cube: prof_id____Amount of projects___Distinct amount of projects___Amnt_Projects 1032------------------- 30 --------------------------1----------------1 1070-------------------90 --------------------------2----------------2 1111-------------------0 ---------------------------1----------------0 1137-------------------0 ---------------------------1----------------0 1234-------------------1404--------------------------9----------------9 1721-------------------504--------------------------7----------------7 2661-------------------85 --------------------------5----------------5 ...--------------------...---------------------------...----------------... 6999------------------- 20---------------------------1-----------------1 9956-------------------50---------------------------5-----------------5 Unknown----------------(empty)---------------------(empty)-----------0 Grand Total------------ 2421------------------------11-----------------11
Grand Total “11“ is the amount of distinct projects +1 (because of the unknown member). So the last column shows the right amount of projects for the professor but I want Grand Total to sum those values and show, how many projects do the professors have (it should be „59“ if for all professors). How could I get the right value to be shown in Grand Total?
I'm using sql server analysis services 2000, i have a problem with grand total when i select more than one member of any demension. the measure of this cube is built on a distinct count agregation function. i have only one measure in th cube
I need to list customers in a table that represents sales over the years.
I have tables:
Customers -> id | name |... Orders -> id | idCustomer | date | ... Products -> id | idOrder | unitprice | quantity | ...
I am using this SQL but it only gets one year:
SELECT customers.name , SUM(unitprice*qt) AS total FROM Products INNER JOIN Orders ON Orders.id = Products.idOrder INNER JOIN Customers ON Customers.id = Orders.idCustomer WHERE year(date)=2014 GROUP BY customers.name ORDER BY 2 DESC
I need something like this:
customer | total sales 204 | total sales | 2015 | total sales (2014 + 2015) -------- customer A | 1000$ | 2000$ | 3000$ customer B | 100$ | 100$ | 200$
Is it possible to retrieve these values in a single SQL query for multiple years and grand total?
I've tried variations on a SELECT statement like below but have been unable to find a way to count only those types per fileNo that have all partNo completed (and to count all types per fileNo with a partNo of 0 and a completed date as they have no parts):
SELECT [FileNo], COUNT(DISTINCT [Type]) AS CountOfAPs FROM APs WHERE (completed IS NOT NULL) GROUP BY [File]
Here is my dataset used by my report definition. The combo of barcode and order id is unique. The 'isDiscountedItem' field indicates if the customer used a coupon to purchased an item at a lower price.
I want to group my report by department id, class id and barcode. Then, I want to count all distinct order ids for which there was at leat one discounted item.
My report would produce the following output considering the above dataset:
Merchandise Number of customers who used a coupon -------------------------------------------------------------------------------------------------------------- Department 1 2
Class 1 2
Barcode 123 2 Barcode 789 1 Department 2 0
Class 7 0
Barcode 456 0
I've been looking at a possible solution using hash tables defined in the report code but I would like to find a 'cleaner' solution. Any help would be appreciated.
select a.Assignment_UniqueID as DeploymentID, a.AssignmentName as DeploymentName, a.StartTime as Available, a.EnforcementDeadline as Deadline, sn.StateName as LastEnforcementState,-----Required Column
We have SharePoint list which has, say, two columns. Column A and Column B.
Column A can have three values - red, blue & green.
Column B can have four values - pen, marker, pencil & highlighter.
A typical view of list can be:
Column A - Column B red  - pen red - pencil red - highlighter blue - marker blue - pencil green - pen green - highlighter red  - pen blue - pencil blue - highlighter blue - pencil
We are looking to create a report from SharePoint List using SSRS which has following view:
          red   blue  green   pen       2    0    1   marker    0    1    0   pencil      1    3    0   highlighter  1    1    1Â
We tried Sum but not able to display in single row.
Hello All, I've created a report that has a count of dates reports. Every company has at least one date report. I've group the report by company and did a count this works find. Now I want to SUM up this field and put it at the end of the report. I've used =sum(reportitems!textbox10.value) but it only works at the page footer. And only give me a grand total for that page. I want a grand total for the whole report. Is there a report footer???
I need to get the Grand Total of the results of this query. The query pulls the total customer quotes for each community in a management company and loads my DataGrid:
This query works fine for individual community totals"SELECT TOP 100 PERCENT vcName, COUNT(DISTINCT vcCustId) AS " & _ " Total FROM dbo.PropReportData WHERE cManagementCo = '" & Session("MgmtCo") & "' and " & _ " (vcEntryDate >= CONVERT(DATETIME, '" & StartDate & "', 102)) AND " & _ "(vcEntryDate <= CONVERT(DATETIME, '" & EndDate & " 11:59:59 PM" & "' , 102))GROUP BY vcName ORDER by vcName"
At first glance you would think that the following query would return the Grand Total for all communities in the management company:
Current Grand Total Query"SELECT COUNT(DISTINCT vcCustID) As gTotal FROM PropReportData WHERE cManagementCo = '" & Session("MgmtCo") & "' AND vcEntryDate >= '" & Session ("StartDate") & "' AND vcEntryDate <= '" & Session("EndDate") & " 11:59:59 PM' "
But here's the problem. If there are multiple customer quotes created for different communites, then the customer(vcCustID) is only counted once in the Grand Total Query because I have to use DISTINCT, which of course only picks up one instance of the customer.
I am trying to calculate grand totals in the table footer area on a single table report. The report table has a grouping with a filter. I want the grand total to sum the visible grouping data but instead it sums the entire dataset. I've tried summing the textbox but RS does not allow that from the footer. I've tried specified the group for the scope but apparently RS scope works outward not inward in regards to groups. A simple example of my problem might be a list of bank accounts whose balance is overdrawn. In the report you want to show only the accounts whose balance has gone negative and all the transactions for those accounts. You can create a group on the account field and then a filter on the group to sum the transaction amount and filter out the accounts whose sum is not below zero. The grand total would supposedly sum the accounts whose balance is negative. Unfortunately the sum is on the entire dataset and therefore includes accounts with good balances. I'm sure some will suggest changing the SQL but that is not an option for me. These seems like a very basic operation for a report writer so I'm guessing there is some easy way to do this that has eluded me. Thanks for any help.
I have this bit of code below and would like to bring back stat_code's which have no value as 0...
select stat_code, COUNT(stat_code)AS Stat_Count --INTO tableSroStatABD from fs_sro where sro_stat ='O' and whse = 'ABD' group by stat_code having stat_code in ('1 QUOTE WN', '2 PR & DEF', '2.1 PRTORD', '3 PRTS AVL', '4 SCHEDULD', '5 LABB JBC', '6 CSTB JBC', '7 WRKS CMP', '8 CSH APP', '9 TO B INV') order by stat_code asc
Im using Access and have created a query which adds up the grand totals of clients orders. However i want to be able to add up what each client has spent in total over any given time period. Basically in SQL logic terms:
take all order totals from same client and add together order totals to produce a grand client spend total.
how to add group subtotal and grand total in report? i try to add formula Sum(Field!Net_Weight.Value) in group footer and unable repeat footer on each page, it return same total on every pages. I hope to get subtotal on each page by group. the expected result would be like this:
Hello,Thanks for helping me with this... I really appreciate it.I have a table called tblPatientDemographics with a number of columns.I would like to count the number of NULL values per record within mytable.tblPatientDemographicsPatientID Age Weight Height Race1234567 20 155 <NULL> Caucasian8912345 21 <NULL> <NULL> <NULL>In the first example above I want to display '1'In the second example above I want to display '3'Any help would be very much appreciated.Thanks !Chad*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
I have a requirement where I need to show the maximum value in grand totals but for the dimension members the same measure has to sum.
For ex: lets say I have a measure called Test and this is a base measure. The aggregation type set  to this is SUM.
For this same measure the grand totals should not show the sum instead it should show the maximum value of the dimension members which is being analyzed across.
My FactEmployeeTable showing 13 rows of data related to employees, but i used a bridge table for connecting project and employee dimensions. In the ProjEmpBridge table i mapped only 6 employees data to the proj's data. When dragging projet name and employee name it is showing data related to 6 employees but grand total showing 13 as the result. I dont know why it is showing 13 instead of 6. Can anyone please solve this issue.
I am having some trouble getting a Grand Total column at the end of my matrix report (not row at the bottom), such as you get by default in an Excel pivot table.
I have managed so far to add another column that sums up all values across the data range for a particular product code. My intention was to hide all but the last (I did something similar on rows). However you cannot use an expression on the width property for columns, so this will not work.
My report is very standard: Year Month (grouped by year) Product code | Description [qty]
I want a column that displays the total qty across all dates for each row. Surely this is possible?
I joined different tables and got a result like this:
result | process | goal | date | ------- ---------- ------ ----------- ok | process4 | 1 | 12.10.2013 bad | process1 | 2 | 13.10.2013 ok | process1 | 4 | 12.12.2013 good | process4 | 1 | 03.01.2014 ok | process1 | 3 | 10.04.2013 bad | process3 | 6 | 09.01.2014 bad | process4 | 3 | 30.12.2013 best |NULL| NULL
Now I want to count the results by counting the processes and group them by the result.
But it should be count the latest result per process only, e.g. for goal "1" just "good" at 03.01.2014. I solved that with a subquery (date=SELECT MAX(...)..).
But now the result "best" disappears, because that column has no date.
Secondly I want to count results for a specific process, e.g. for process4. Every goal has max. one process, with different dates. But one process could have more than one goal.
I want to have this result for process4:
count | result ------ ------- 1 | good 1 | bad 0 | ok 0 | best
But I got only:
count | result ------ ------- 1 | good 1 | bad
I have tried a lot, but nothing works.
The whole result (best, good, ok, bad) are stored in an other table and I joined it.
Hello Guys, I am working on a matrix report which has several row groups and 1 column group. After execution, the column group wil end up with several columns containg numeric counts. I would like to have the grand total for each "column group" column as a last row on this report. For row groups you can just right click "Subtotal", but that is not possible for column group. Could someone please help me to find a clever way of accomplishing this, please. Thank you so much for your help!
In my cube I have defined a role where thet user can only browse certain dimention value. BUt in grand Total the result showing is for all the diemnsion values.
for example The user restricted to browse only Australia and UK Country , But in grand total its showing the SUM of all the country.
I have a script that produce a result set that is almost complete. I have a new requirement come up to put a Total at the button of the result set of my Query.
I'm using SQL Server 2008 ;WITH CTE AS ( SELECT Case WHen left(MONTHDate,3)='Jan' Then '01' WHen left(MONTHDate,3)='Feb' Then '02' WHen left(MONTHDate,3)='Mar' Then '03' WHen left(MONTHDate,3)='Apr' Then '04' WHen left(MONTHDate,3)='May' Then '05'
I've created a measure counting instances of unique identifiers utilizing the following formula. However, the Grand Total does not equal the sum of the sub-totals.Â
