Distributed Transaction Completed. Either Enlist This Session In A New Transaction Or The NULL Transaction. (HELP)

Jan 8, 2008

Hi,

i am getting this error "Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.".

my transations have been done using LINKED SERVER. when i manually call the store procedure from Server 1 it works but when i call it through Service broker it dosen't work and gives me this error.



Thanks in advance.


View 2 Replies


ADVERTISEMENT

Error 8525: Distributed Transaction Completed. Either Enlist This Session In A New Transaction Or The NULL Transaction.

May 31, 2008

Hi All

I'm getting this when executing the code below. Going from W2K/SQL2k SP4 to XP/SQL2k SP4 over a dial-up link.

If I take away the begin tran and commit it works, but of course, if one statement fails I want a rollback. I'm executing this from a Delphi app, but I get the same from Qry Analyser.

I've tried both with and without the Set XACT . . ., and also tried with Set Implicit_Transactions off.

set XACT_ABORT ON
Begin distributed Tran
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.TRANSACTIONMAIN
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.TRANSACTIONMAIN
set REPFLAG = 0 where REPFLAG = 1 and DONE = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.WBENTRY
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.WBENTRY
set REPFLAG = 0 where REPFLAG = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.FIXED
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.FIXED
set REPFLAG = 0 where REPFLAG = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.ALTCHARGE
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.ALTCHARGE
set REPFLAG = 0 where REPFLAG = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.TSAUDIT
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.TSAUDIT
set REPFLAG = 0 where REPFLAG = 1
COMMIT TRAN


It's got me stumped, so any ideas gratefully received.Thx

View 1 Replies View Related

SSIS, Distributed Transaction Completed. Either Enlist This Session In A New Transaction Or The NULL Transaction.

Feb 22, 2007

I have a design a SSIS Package for ETL Process. In my package i have to read the data from the tables and then insert into the another table of same structure.

for reading the data i have write the Dynamic TSQL based on some condition and based on that it is using 25 different function to populate the data into different 25 column. Tsql returning correct data and is working fine in Enterprise manager. But in my SSIS package it show me time out ERROR.

I have increase and decrease the time to catch the error but it is still there i have tried to set 0 for commandout Properties.

if i'm using the 0 for commandtime out then i'm getting the Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.

and

Failed to open a fastload rowset for "[dbo].[P@@#$%$%%%]". Check that the object exists in the database.

Please help me it's very urgent.

View 3 Replies View Related

Distributed Transaction Completed. Either Enlist This Session In A New Transaction Or The NULL Transaction.

Feb 6, 2007

I am getting this error  :Distributed transaction completed. Either enlist this session in a new
transaction or the NULL transaction. Description:
An unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the error and
where it originated in the code. Exception Details:
System.Data.OleDb.OleDbException: Distributed transaction completed. Either
enlist this session in a new transaction or the NULL transaction.have anybody idea?!

View 1 Replies View Related

Distributed Transaction Completed. Either Enlist This Session In A New Transaction Or The NULL Transaction.

Dec 22, 2006

i have a sequence container in my my sequence container i have a script task for drop the existing tables. This seq. container connected to another seq. container. all these are in for each loop container when i run the package it's work fine for 1st looop but it gives me error for second execution.

Message is like this:

Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.

View 8 Replies View Related

Fix - Enlist Operation Failed: SQL Server Could Not Register With Microsoft Distributed Transaction Coordinator (MSDTC)

Mar 13, 2008

Distributed transactions were happily running between our SQL servers and then we installed Windows 2003 Server SP2 and all of a sudden we got this nice error message when attempting a remote data update via linked servers. I couldn't even run "BEGIN DISTRIBUTED TRANSACTION" without getting the error message. The full error message is:

"Enlist operation failed: 0x8004d00e(XACT_E_NOTRANSACTION). SQL Server could not register with Microsoft Distributed Transaction Coordinator (MSDTC) as a resource manager for this transaction. The transaction may have been stopped by the client or the resource manager."

Apparently, SP2 disables network DTC access (how nice, I feel more secure knowing that my data can't be updated remotely anymore).

Solution:

From Control Panel | Add or Remove Programs | Add Remove Windows Components
Select "Application Server" and click the "Details" button
Check "Enable network DTC access" and click OK for however many prompts it takes to apply the changes.

****NOTE**** this change WILL SHUT DOWN SQL SERVER so plan accordingly (this would have been handy to know in advance since I ran it in the middle of the workday and everyone got disconnected).

Hope this helps!

View 2 Replies View Related

The Microsoft Distributed Transaction Coordinator (MS DTC) Has Cancelled The Distributed Transaction.

Feb 29, 2008

We have a test db, a staging db and a live db. I have a stored procedure that runs fine on test and staging, but throws the following error on live.


The Microsoft Distributed Transaction Coordinator (MS DTC) has cancelled the distributed transaction.


The stored procedure uses linked servers and a transaction.
We're using the following transaction code in the stored procedure

BEGIN

BEGIN TRANSACTION

BEGIN TRY

---
procedure stuff here
---
COMMIT TRANSACTION
END TRY



BEGIN CATCH

DECLARE @ErrorSeverity INT, @ErrorNumber INT, @ErrorMessage NVARCHAR(4000), @ErrorState INT

SET @ErrorSeverity = ERROR_SEVERITY()

SET @ErrorNumber = ERROR_NUMBER()

SET @ErrorMessage = ERROR_MESSAGE()

SET @ErrorState = ERROR_STATE()



IF @ErrorState = 0

SET @ErrorState = 1



RAISERROR ('ERROR OCCURED:%d', @ErrorSeverity, @ErrorState, @ErrorNumber)

IF XACT_STATE() < 0

ROLLBACK TRANSACTION

END CATCH



END


I found the following link which seems to be the problem we're experiencinghttp://support.microsoft.com/kb/937517

The link includes a workaround which is the following:
"To prevent the SQLNCLI provider from sending an attention signal to the server, use the SQLNCLI provider to consume fully any rowsets that the OLE DB consumer creates. "


How do I use the SQLNCLI provider to fully consume any rowsets?

View 11 Replies View Related

New Transaction Cannot Enlist In The Specified Transaction Coordinator

Nov 28, 2004

I'm getting this error:

The operation could not be performed because the OLE DB provider 'SQLOLEDB' was unable to begin a distributed transaction.
[OLE/DB provider returned message: New transaction cannot enlist in the specified transaction coordinator. ]
OLE DB error trace [OLE/DB Provider 'SQLOLEDB' ITransactionJoin::JoinTransaction returned 0x8004d00a].

http://support.microsoft.com/kb/839279 this didn't help

any suggestions?

View 3 Replies View Related

New Transaction Cannot Enlist In Transaction Coordinator (was Please Help...)

Apr 18, 2005

Hi all,

In my ASP application, I've been using this code:

----------------------------------------------
dim conn, connectionstring

connectionstring= "Provider=SQLOLEDB.1; Data Source = blahblah; Initial Catalog = abc; User Id = osss; Password=xxx"

set conn = server.CreateObject("adodb.connection")
conn.open connectionstring

----------------------------------------------

It's just basically to set up the connection to the SQL server, it works on my other pages, but on a few pages, the last line (conn.open connectionstring) triggers this error:

"Microsoft OLE DB Provider for SQL Server error '8004d00a'

New transaction cannot enlist in the specified transaction coordinator. "

I've never encountered this error before and I couldn't think of any solution... please help!!!

Thanks so much,
Annie

View 2 Replies View Related

New Transaction Cannot Enlist In The Specified Transaction Coordinator

May 18, 2007

Hi



I am trying transfer data from Back Office Server to Head Office using DTS. It is failing in few stores, rest of the store it is OK

Configuration

Head office :Windows 2003 SP1 and Sql Server 2000 SP3

Failing Store:Windows 2003 SP2 and SQL SERVER 2005

Successful Store :Windows 2003 SP2 qnd SQL SERVER 2000





At Store: Setting for MSDTC

Log on Account for MSDTC Service : Network Service

Network DTC Access = True

Allow Inbound = True

Allow Outbound = True

No Authentication Required = True

TurnOffRPCSecurity = 1

port Ranges for RPC = 5000- 5100



The error Message is as follows:

(Microsoft Data Transformation Services (DTS) Package (8004d00a): Connection 'Head Office SQL Server' for Task 'DTSTask_DTSDataPumpTask_1' does not support joining distributed transactions or failed when attempting to join. Unable to enlist in the transaction.
) (Microsoft OLE DB Provider for SQL Server (8004d00a): New transaction cannot enlist in the specified transaction coordinator. )



If any one can help me, that will be great!!! Thanks in advance



Shiny

View 3 Replies View Related

Sql2005:Cannot Use SAVE TRANSACTION Within A Distributed Transaction

Oct 10, 2005

Error returned when trying to commit the transaction to a database that is a replication distributor. (sql2005 ctp16)

View 10 Replies View Related

Why Transaction Gets Promoted To Distributed Transaction

Feb 1, 2007

Hi,On My local SQL server I have added a linked server to another SQLserver (remoteserver) in another Windows NT Domain.When I run this codeselect count(*) from remoteserver.mosaics.dbo.LocationThis works fine.However when I usebegin transactionselect count(*) from remoteserver.mosaics.dbo.LocationIt errors out saying thatThe operation could not be performed because the OLE DB provider'SQLOLEDB' was unable to begin a distributed transaction.New transaction cannot enlist in the specified transactioncoordinator. ]OLE DB error trace [OLE/DB Provider 'SQLOLEDB'ITransactionJoin::JoinTransaction returned 0x8004d00a].My question is even though I am just reading data from theremoteserver, why does the local transaction get promoted to adistributed transaction.Any help will be grately appreciated.TIA...Rohit

View 2 Replies View Related

Transaction Scope - The Operation Could Not Be Performed Because OLE DB Provider SQLNCLI For Linked Server XXX_LINKED_SERVER Was Unable To Begin A Distributed Transaction. OLE DB Provider SQLNCLI&a

May 15, 2008

Hello, I've a problem with a software developed in C# with the framework 2.0. This is the error I receive : The operation could not be performed because OLE DB provider "SQLNCLI" for linked server "XXX_LINKED_SERVER" was unable to begin a distributed transaction. OLE DB provider "SQLNCLI" for linked server "XXX_LINKED_SERVER" returned message "No transaction is active.". If I try directly to restart the process, it works fine. Is there someone who can help me ? This is the process 1. In C# --> Call of a Query : select from the linked server (db in sql 2005) and insert into a table SQL 2005 2. In the C# --> using (TransactionScope scope = new TransactionScope()) and insert in a table in SQL 2005 which is link server Thank in advance.

View 1 Replies View Related

Enlist Of MSDTC Transaction Failed: XACT_E_NOTRANSACTION.

Aug 27, 2006

I get the following error in the SQL ErrorLog file and in the Event Viewer when using a J2EE web application deployed on BEA WLS 8.1sp5 using the Weblogic JDBC Type4 XA driver with MSSQL Server 2000 SP4

Enlist of MSDTC transaction failed: XACT_E_NOTRANSACTION.

View 2 Replies View Related

Problem In Selecting Records That Another User Is Updating Them And His Transaction Not Completed

Jan 31, 2008



hello

I use SQLServer2000 when i begin a transaction and update set of records in a table
till i don't commit or rollback the transaction nobody can not select
previous values of that records and it must wait until i complete the transaction, i have tested it in oracle but it hasn't this limitation
don't you think it is Sqlserver weakness?

thanks

View 9 Replies View Related

Distributed Transaction

Sep 28, 2004

Hi all,
I am trying to merge data of 2 tables on different servers with an insert statement.

INSERT INTO SERVER1.db.owner.table
select s2.* from SERVER2.db.owner.table as s2
LEFT JOIN SERVER1.db.owner.table as s1
ON s1.key=s2.key
where s1.key is null

I got this error.
The operation could not be performed because the OLE DB provider 'SQLOLEDB' was unable to begin a distributed transaction.
[OLE/DB provider returned message: New transaction cannot enlist in the specified transaction coordinator. ]
OLE DB error trace [OLE/DB Provider 'SQLOLEDB' ITransactionJoin::JoinTransaction returned 0x8004d00a].


while the select query is giving the result.
I have done simmilar inserts on some other tables which worked fine

I have created sp_addlinkedserver.
and DTC set on both servers.

any help will be greatly appreciated

View 3 Replies View Related

Distributed Transaction

Dec 27, 2004

Hi All,
I am trying to use distributed transaction (using linked Server).
But getting the folloing error..

Some one please help...


following is the error...

The operation could not be performed because the OLE DB provider 'MSDASQL' was unable to begin a distributed transaction.

[OLE/DB provider returned message: [Microsoft][ODBC SQL Server Driver][SQL Server]Transaction context in use by another session.]
OLE DB error trace [OLE/DB Provider 'MSDASQL' ITransactionJoin::JoinTransaction returned 0x8004d00a].

View 7 Replies View Related

Distributed Transaction

Jul 11, 2006

Hi again,
I do not know when to use Distributed Transaction.
Would you please give an example about its usage or give a tutorials about this ?

Thanks

View 14 Replies View Related

DTC - Transaction Context In Use By Another Session

May 5, 2006

Hi

I have a master package that executes a series of sub packages. The master package is run from a SQL Agent job. The packages are reading from and writing to two databases on the same instance of SQL Server 2005.

If I set the Execute Package Tasks for the sub packages without any precedence constraints between them and set TransactionOption = Required at the master package level (and supported from there downwards) I get the following errors.

The event log shows me:

The SSIS Runtime has failed to enlist the OLE DB connection in a distributed transaction with error 0x8004D00A "Unable to enlist in the transaction.".

Running a SQL Profiler trace shows me:

Error: 3910, Severity: 16, State: 2
Transaction context in use by another session.

This problem is well documented and seems to go back to DTS in SQL Server 7.0 . . . see http://support.microsoft.com/?scid=kb;en-us;279857&spid=2852&sid=150

I can get round it by setting precedence between the sub packages - making them run one at a time solves the problem. But then we don't get the performance benefits of running the packages concurrently. Does anyone have any other solutions.

TIA . . . Ed

View 6 Replies View Related

Transaction Context In Use By Another Session.

Jun 6, 2006

I'm having a SP1 on server A.

This procedure has a begin trans and a commit. In this procedure i'm inserting data into tables. This data is provided by an extrenal app in staging tables. On the tables i'm inserting data on i'm having triggers that again are starting a SP2. I'm using a cursor on the inserted table to achieve this. The SP2 only insert a record on a table that is on a linked server.

For testing reasons at this moment this is my dev machine too.

The error 'Trans ... ' pops up ....

Any suggestions ..



Kind Regards, Harry

View 5 Replies View Related

BEGIN TRANSACTION Or BEGIN DISTRIBUTED TRANSACTION

Jul 20, 2005

Hi have have two linked SQL Servers and I am trying to get things workingsmootly/quickly.Should I be using 'BEGIN TRANSACTION' or 'BEGIN DISTRIBUTED TRANSACTION' ?Basicly, these SPs update a local table and a remote table in the sametransaction. I cant have one table updated and not the other. Please dontsay replicate the tables either as at this time, this is is not an option.I have for example a number of stored procedures that are based around thefollowing:where ACSMSM is a remote (linked) SQL Server.procedure [psm].ams_Update_VFE@strResult varchar(8) = 'Failure' output,@strErrorDesc varchar(512) = 'SP Not Executed' output,@strVFEID varchar(16),@strDescription varchar(64),@strVFEVirtualRoot varchar(255),@strVFEPhysicalRoot varchar(255),@strAuditPath varchar(255),@strDefaultBranding varchar(16),@strIPAddress varchar(23)asdeclare @strStep varchar(32)declare @trancount intSet XACT_ABORT ONset @trancount = @@trancountset @strStep = 'Start of Stored Proc'if (@trancount = 0)BEGIN TRANSACTION mytranelsesave tran mytran/* start insert sp code here */set @strStep = 'Write VFE to MSM'updateACSMSM.msmprim.msm.VFECONFIGsetDESCRIPTION = @strDescription,VFEVIRTUALROOT = @strVFEVirtualRoot,VFEPHYSICALROOT = @strVFEPhysicalRoot,AUDITPATH = @strAuditPath,DEFAULTBRANDING = @strDefaultBranding,IPADDRESS = @strIPAddresswhereVFEID = @strVFEID;set @strStep = 'Write VFE to PSM'updateACSPSM.psmprim.psm.VFECONFIGsetDESCRIPTION = @strDescription,VFEVIRTUALROOT = @strVFEVirtualRoot,VFEPHYSICALROOT = @strVFEPhysicalRoot,AUDITPATH = @strAuditPath,DEFAULTBRANDING = @strDefaultBranding,IPADDRESS = @strIPAddresswhereVFEID = @strVFEID/* end insert sp code here */if (@@error <> 0)beginrollback tran mytranset @strResult = 'Failure'set @strErrorDesc = 'Fail @ Step :' + @strStep + ' Error : ' + @@Errorreturn -1969endelsebeginset @strResult = 'Success'set @strErrorDesc = ''end-- commit tran if we started itif (@trancount = 0)commit tranreturn 0

View 1 Replies View Related

SCOPE_IDENTITY( ) In Distributed Transaction [:S]

Mar 15, 2007

i am inserting new record in linked server and i need to get the id (which is of course autonumber) of newly added record. can't i get it using SCOPE_IDENTITY( ) ? SCOPE_IDENTITY( ) seems to be returning null. so SCOPE_IDENTITY( ) doesn't work in distributed transaction?

View 2 Replies View Related

Msg 7391 With Distributed Transaction....

Mar 28, 2006

Hi:
When I tried to run a remote proc (with one parameter of date to return a set of records (no problem in return records) and to insert to the local database table A, with following errors:

Server: Msg 7391, Level 16, State 1, Line 1
The operation could not be performed because the OLE DB provider 'SQLOLEDB' was unable to begin a distributed transaction.
[OLE/DB provider returned message: New transaction cannot enlist in the specified transaction coordinator. ]
OLE DB error trace [OLE/DB Provider 'SQLOLEDB' ITransactionJoin::JoinTransaction returned 0x8004d00a].

SET XACT_ABORT ON

BEGIN DISTRIBUTED TRAN
insert tblA(column1, column2, column3)
exec [remoteServerB].DBX.dbo.usp_XYZ '03/28/2006 '
COMMIT TRAN

Both remote SQL and Local SQL are SQL2000 with sp4 and both Distributed Transaction Coordinator are on.

Any idea? :rolleyes:
thanks
David

View 2 Replies View Related

Distributed Transaction Problem

Jun 11, 2002

Hello,
I've got stuck trying to run distributed transaction on same machine with two SQL instances. ()
Running transaction from Query Analizer With SET XACT_ABORT ON it works fine.
(Without that - it throws an error about unable to begin nested distributed transaction).
But from Application (C++, ODBC) it waits for a while and throus an error: 'unable to begin distributed transaction' even SET XACT_ABORT ON is applied before issuing transaction in Stored Procedure.

What's happening here ?

Thanks in advance.

View 1 Replies View Related

Distributed Transaction Failure

May 10, 2006

I’m attempting to insert the result set from a remote query into a local table and I’m getting the following error:

Msg 8501, Level 16, State 1, Line 1
MSDTC on server 'REMOTESVR' is unavailable.
OLE DB error trace [OLE/DB Provider 'SQLOLEDB' ITransactionJoin::JoinTransaction returned 0x8004d01c].
Msg 7391, Level 16, State 1, Line 1

The operation could not be performed because the OLE DB provider 'SQLOLEDB' was unable to begin a distributed transaction.


MSDTC is running on both servers. Has anyone ever seen this or have any insight into the cause?


The code that I’m trying to run is:

create table msver
(
[Index] int,
[Name] varchar(30),
Internal_Value varchar(20),
Character_Value varchar(512)
)

insert into msver
exec ('exec [REMOTESVR].master.dbo.xp_msver')


Note that the remote query works fine.

Thanks!
Eric

View 3 Replies View Related

Distributed Transaction Error, Need Help Please!!

Mar 9, 2004

Hi, I have configured a linked server, and i have a procedure which makes an UPDATE in a local table using the data in the linked server.

Specifically, I have a function which checks if a given code exists in a linked server's table. The UPDATE changes the value of a column in a local table, if the function returns 1.

I've run the procedure and it gave an error after a few hours cause a simple conversion error inside the function. I solved the error. After this, the procedure did not work more. It gives me the following message:

Server: Msg 7391, Level 16, State 1, Procedure EXISTEONC, Line 16
The operation could not be performed because the OLE DB provider 'MSDASQL'
was unable to begin a distributed transaction.

(EXISTEONC is the function, and in the line 16 there is an OPENQUERY)
Im sure MSDTC is working... i'm lost because i dont know why it worked the first time and not now. Ive also wrote the function again as it was before, but it still doesent works.

Thanks a lot...

View 6 Replies View Related

Distributed Transaction Errors

Jan 13, 2014

I was getting this error message from our Cold Fusion application front end when it was trying to execute one of our stored procedures.The operation could not be performed because OLE DB provider "SQLNCLI10" for linked server "SERVERNAME" was unable to begin a distributed transaction.

I was a bit puzzled by this because we don't use distributed transactions (at least I don't specifically code them). I did some research online and I found out how to modify the DTC component on the server to have the proper configurations.Then, when trying again we got this error message:

Unable to start a nested transaction for OLE DB provider "SQLNCLI10" for linked server "SERVERNAME". A nested transaction was required because the XACT_ABORT option was set to OFF.

So, I was able to resolve that as well by changing that option in the stored procedure...Now, there are 3 stored procedures - One does inserts; one does updates; and one does deletes.The actions are being done to a view in a database on another server. The view definition uses a linked server.

The error was/is only happening on the INSERT stored procedure. So, I'm a little baffled as to why it only bombs on the insert stored procedure and not the others. They are all coded in the same fashion..Do distributed transactions work differently if its an insert vs. update or delete? Why is it all of the sudden treating these as distributed transactions when they aren't coded as such?

The code is very simple and looks just like this:

INSERT vw_Name
SELECT bla, bla2, bla3
FROM local table
WHERE bla bla

And again vw_Name would be a table on another server that we have via Linked Server. It is also a SQL Server (but its SQL 2000).

View 6 Replies View Related

Distributed Transaction Problem

Aug 29, 2006

I'm having problems with distributed transactions. I know this has been descussed a lot before, but i haven't been able to solve my problems anyway.

So, what do I try to do? I try to recieve data from one server (source) to a destination server with an integration services package using a transaction. The source server is a Windows 2003 server running SQL 2000. The destination server is a SQL 2005 Cluster on Windows 2003 Server. Both machines has MSDTC running and allowing both inbound and outbound transactions. I have run DTCPing and DTCTester successfully in both directions.

A bit simplified, my SSIS package looks like this.

Execute SQL Task (Delete old data on the destination server)
Data Flow Task

Get data from source using an OLE DB Source
Write data to destination using an OLE DB Destination

This works just fine if I in my topmost container set TransactionOption to supported, but if I change it into Required, my package fails with the error message:

Error: The SSIS Runtime has failed to start the distributed transaction due to error 0x8004D01B "The Transaction Manager is not available.". The DTC transaction failed to start. This could occur because the MSDTC Service is not running.

Could the fact that the destination is a cluster be a prolem here? I'm pretty sure I have successfully done operations like this in other environments, but without clusters involved.

Oh, one last thing. No firewall what so ever is runnig on or between the servers.

regards Andreas

View 4 Replies View Related

Transaction Context In Use By Another Session Error

May 12, 2006

I have written a stored procedure that calls a C# class.  The sp is called by a trigger on table A.  The class has 2 methods.  Method 1 is the main call from the stored procedure.  Inside it, it sets a connection to the db.  Then it calls another private method which has it's own connection and returns a dataset so that I can close that connection by the end of the method.  When I execute the sp from within sql management studio, it runs just fine.  But when being called from the trigger, I get the "transaction context in use by another session error" error.  I read that I needed to wrap my 2nd connection in ...
using (new TransactionScope(TransactionScopeOption.Suppress)){  open conn here, do work, etc.}
I've tried that and I still get the same error from the trigger.  Anyone know what else I can try?  Thanks.

View 9 Replies View Related

Transaction Context In User By Another Session

Feb 29, 2008

Im using SQL Server 2000 sp2 for ASP application on windows server 2003 sp2.

Im getting an error 'Transaction context in user by another session'.

I have not at all used BEGINTRANS / committrans , No Insert / Update statements.
the kind of SQL statements that i was using in that page load is only "SELECT statements"

Can any one give me answer how to get rid of this. I have used only one connection object. and result set as a loop containing few more result sets. But I m sure they are so complex statements to block the SQL server transactions.



Awaiting for reply..................

View 1 Replies View Related

Error: Transaction Context In Use By Another Session

Oct 30, 2006

I am programming in ASP and SQL server.

I am using this tag <%Transaction=Required%> to do the transaction.

And it woks well, but the problem is that sometimes I get this error: "transaction context in use by another session"...

It's really weird because it only happens in the same row. If choose this row to be shown I get that message, but if choose another row I get result with no error. And if take out the tag <%Transaction... I don't get any error.

I've searched in other forums about this error, and one guy claims that there is a bug in the MTS and there is no way to solve the problem.

View 2 Replies View Related

SQL Server Admin 2014 :: Restore Lost Transaction From Transaction Log File

Jun 10, 2015

I have Full database backup upto previous day and transaction logfile of Today transaction. my database has crashed. I have restored previous day's Full backup. I have faced difficulty to restore today's transaction from today's transaction log. What are the steps to restore full database back and one day's transaction log file. Note: there is no differential database backup and transaction backup.

View 8 Replies View Related

I Need Away To Show The Pending Transaction From Transaction Replication In A User Friendly Format.

Jul 11, 2007



I want to list out the pending transaction for transaction replication by publication.



Help needed.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved