I have one table with columns patientName , Nurse,ArrivalDate, DepartDate . It has all the patiet information for all the Nurses.
I am calculating Average Number of patients per day per nurse by using below query
SELECT Nurse, COUNT(DISTINCT patientName) AS NoOfPatients, COUNT(DISTINCT patientName) * 1.0/COUNT(DISTINCT ArrivalDate) AS [AvgNo.ofpatientsPerDay] FROM Table t GROUP BY NURSE
but if ArrivalDate is Null I am getting below error saying that Divide by zero error encountered.
SELECT Client,State, CASE WHEN Weight>=11 and Weight<=455 and Height>=110 and Height<=250 THEN isnull((cast(nullif(Weight,0)/power((NullIf(Weight,0)/100),2) as int)),0) else -1 end as BaseBMIScore FROM Test100
And I got following error:
Msg 8134, Level 16, State 1, Line 1 Divide by zero error encountered.
When i exec an sp it runs a sum, sometimes it is possible that there is a 0 value, it then returns an error Divide by zero error encountered How can i work around this error
My sp code is
CREATE proc CP_avgloss_rings @mID varchar(10), @startdate datetime, @enddate datetime as select ((sum(vtp)-(sum(moneyout)))/100) / ((sum(playtime))/ 3600) as avgloss from dbo.rings where machineID = @mID and convert(varchar,njdate,121) between convert(varchar,@startdate,121) and convert(varchar,@enddate,121) GO
Select Model, Kota as [Çıkan Anket] , (Select Count(*) From dbo.Main Where RuhsatSahibiModel = tt.Model) as [Verilen Adres] , (Select Count(RuhsatSahibiSahisID) From dbo.Main Where DurumKoduID in(1,2,3,4,5,6,9,12,13,14,15,16,17,20,21,22,23,24,25,26,27,28) and RuhsatSahibiModel = tt.Model) as [Donen Adres]
,
(Select Count(*) From dbo.Main Where DurumKoduID = 2 and RuhsatSahibiModel = tt.Model) as [Donen Anket] ,((Select cast(Count(*) as decimal(2,0)) From dbo.Main Where DurumKoduID = 2 and RuhsatSahibiModel = tt.Model ) / (Select top 1 (cast(Kota as decimal(2,0))) From dbo.Model Where Model = tt.Model))*100 as [Oran]
,
(Kota - (Select Count(*) From dbo.Main Where DurumKoduID = 2 and RuhsatSahibiModel = tt.Model)) as [Kalan Anket] , ((Select Count(*) From dbo.Main Where RuhsatSahibiModel = tt.Model)- (Select Count(RuhsatSahibiSahisID) From dbo.Main Where DurumKoduID in(1,2,3,4,5,6,9,12,13,14,15,16,17,20,21,22,23,24,25,26,27,28) and RuhsatSahibiModel = tt.Model)) as [Kalan Adres]
From
(SELECT Model, SUM(Kota) AS Kota FROM dbo.Model GROUP BY Model) as tt where tt.Model in('A3')
it's returning error message : "Divide by zero error encountered."
After running a script in QA, I got several result sets and one of them is "Warning: Null value eliminated from aggregate.". How can I get rid of this output so it's not shown at all. I use the output as a recordset on the ASP page.
I am getting this warning when I execute my query:
* Warning: Null value is eliminated by an aggregate or other SET operation. *
It is still populating the results fine, but I dont know how to get rid of it. I know one of my solutions is:
SET ANSI_WARNINGS OFF
-- sql code
SET ANSI_WARNINGS ON
Apparently it has to do with the MAX function in the following line:
SELECT @BusinessDay = (SELECT MAX(PeriodDate) FROM TableName)
I checked in the table and PeriodDate column has about 4000 of 10,000 rows blank. so Im assuming that is what is causing the error. what should I do? something like:
SELECT @BusinessDay = ISNULL((SELECT MAX(PeriodDate) , @TodaysDate) From TableName
declare @LastDate datetime SELECT @LastDate = max([LastUpdate]) FROM [exhibitor].[dbo].[blgBelongs] WHERE (([Table1]=@module1 OR [Table2]=@module2 )or ([Table2]=@module1 OR [Table1]=@module2 ) AND Exists (SELECT [Table1],[Table1ID] FROM [exhibitor].[dbo].[blgBelongs] WHERE table2=30 and table2ID=@dmn_ID))
Before I see @LastDate , I see this warning
Warning: Null value is eliminated by an aggregate or other SET operation.
In a t-sql 2012 query that will be updated in a stored procedure I am getting the following warning message:
Warning: Null value is eliminated by an aggregate or other SET operation. I would like to get rid of this warning missing without just turning off the warning messages.
I would like to change the sql so that it does not occur. The following is my new sql that generates the warning:
case when (coalesce(a.status,ae.status) = 'A') and (IsNull(ae.excuse, 'U') = 'U') and (IsNull(ae.code, 'DRC') = 'DRC') then
sum(DATEDIFF(minute,pm.startTime,pm.endTime)-coalesce(pm.lunchTime,0)-coalesce(a.presentMinutes,0)) else 0 end as DRCMinutes,
parsename('$'+ Convert(varchar,Convert(money,Q.[Product Cost]-R.[Shared Cost]),1),2) as [Pre Cost], parsename('$'+ Convert(varchar,Convert(money,R.[New Product Cost]-R.[Shared Cost]),1),2) as [Post Cost]
Formula: [Post Cost] / [Pre Cost]
Expected:
If [Post Cost] is null then I would need to assign 1 and divide by [Pre Cost] and similarly if [Pre Cost] is null then I would need to assign 1 so that I can divide [Post Cost] / [Pre Cost]
We are using sql server 2005 Enterprise Edition with service pack1
I got the following error messages in the SQL log
The operating system returned error 21(The device is not ready.) to SQL Server during a read at offset 0x00000000090000 in file '....mdf'. Additional messages in the SQL Server error log and system event log may provide more detail. This is a severe system-level error condition that threatens database integrity and must be corrected immediately. Complete a full database consistency check (DBCC CHECKDB). This error can be caused by many factors; for more information, see SQL Server Books Online. fcb::close-flush: Operating system error 21(The device is not ready.) encountered.
I got these errors for about 2 hrs and after that I see these messages in the sql log
Starting up database ' ' 1 transactions rolled forward in database '' (). This is an informational message only. No user action is required. 0 transactions rolled back in database ' ' (). This is an informational message only. No user action is required. Recovery is writing a checkpoint in database ' ' ( ). This is an informational message only. No user action is required. CHECKDB for database '' finished without errors on (local time). This is an informational message only; no user action is required.
Can anyone please help me in troubleshooting this issue. Why this migh have happened.
I have recently installed a new server for a client running SBS2003 R2 with SQLServer 2005.
I noted that the backup failed the SQL Server database on the consistenty check. On checking the event log I see this message as per above.
It reads in the description
c:datalawsqldatadata41_Data.MDF:MSSQL_DBCC6:
Operating system error 112(error not found) encountered.
Looking in the error log I see :
Configuration option 'user options' changed from 0 to 0. Run the RECONFIGURE statement to install.
Error: 17053, Severity: 16, State: 1.
C:DataLAWsqldatadata41_Data.MDF:MSSQL_DBCC6: Operating system error 112(error not found) encountered.
DBCC CHECKDB (data41) WITH no_infomsgs executed by NT AUTHORITYSYSTEM found 0 errors and repaired 0 errors. Elapsed time: 0 hours 0 minutes 26 seconds.
This is a new server with about 90% of disk space NTFS still available
This is a problem I encountered when I had to detach a database file (type .mdf):
1) I went to the MS SQL Management Server Studi and detached my database file successfully from a connection called Workhorse.
2) I needed to place the .mdf database file into a zip file in order to put it on a remote server. I did this using Shared Portal. This was also successful
3) However when I tried reattaching the database file, I got this error:
CREATE FILE encountered operating system error 5A(Access denied.) while attempting to open or create the physical file "CProgram FilesMSSQL ServerMSSQLData<databasename>.mdf'
Q) The database file and log file (ldf) exist in the correct directory so I don't know what happened. Can any one help?
Good day good people of the forum while carrying out a remote installation i encountered an UNC path error can anyone be of help giving me a comprehensive answer to the problem. am stuck i cant move ahead from that part of the installation
we now used synonyms on the version 6 of our peoject, at first it turns out good. Then we migrate a database to the new database, everythings fine, its just a data migration anyway. The target database' structure and DML's wasn't change during migration. then intermittendly, we're encountering "A severe error occurred on the current command. The results, if any, should be discarded". I said its intermittent because sometime its ok, mostly its not functioning.
This is very painfull because all our scripts has this synonym. All our scripts uses an sp execution logging stored procedured of another database so we created a synonym for those sp's instead of fully qualifying the procedure name.
This is a major issue for us, please advise. You may response here, send me email or email me. Many Thanks.
Rodel E. Dagumampan Email: dehranph@gmail.com Yahoo: dehranph Blog: http://community.devpinoy.org/blogs/dehranph
When I execute the following query, I get a Divide by zero error. I believe the Divide By zero error is occuring in the following statement. How do I avoid the error?
I am writing a report that deals with time in seconds. I am trying to figure out the average handle time for each call. To Get this number i use 5 fields. the formula is
Which translates to ((Incoming Handle Time) + (Work))/(Number of Incoming Calls)
When it does the calculations some times the cs_acd_trk_c + cs_acd_ext_c (number of incoming calls) is zero.
I dont know how to get around this ... i tried to set that value to <>0 in my query but it threw my other numbers off for number of calls which is a different value on the report. Any Help on this would be super appreciated. Thanks, Mitch
I am getting an error in a calculated field that could potentially divide by zero, even though I'm using an IIF. The column displays in the report as "#Error". My expression looks like this:
I have successfully used this approach with INT fields, but this time the Hours field is a NUMERIC(9,2). My workaround is to do this:
IIF(Fields!Qty.Value = 0, "None", IIF(Fields!Qty.Value = 0, 42, Fields!Hours.Value) / Fields!Qty.Value) I guess the 42 is cast to an INT inside the second IIF and the calculation works. What's strange is that the division would even be carried out in the event of Qty = 0 from the first IIF, because the expression should just evaluate to "None" and that would be that. Has anybody run into this problem? Is my workaround the recommended approach? -Larry
I have a dtsx import script which import a delimeted csv file into a sql 2012 table. The default of the output length for all columns is set to 50 characters.All records which do not comply goes to another table in the same database. When I ran the script,all the records goes to the error table. I have now found a way to retrieve the column id and the error message to find that some column are been truncated and do not import.
I now need to know which column is given the error. The import file have more than 300 columns and I do not want to go and check each column length.I am using visual studio 2010 and using visual basic. I have found a sample of C+,but the screen shots is very small and when I type in the command,i do not compile.
We have over 400 import scripts and I could really use this in all of them to trouble shoot.
I installed SQL Server 2005 Integration services on Windows XP machine. Then I went to the SQL Server Configuration Manager and tried to Start the SSIS service. The "Log On As" value is "NT AUTHORITYNetworkService". But I get the follwoing error:
The request failed or the service did not respond in a timely fashion. COnsult the event log or other applicable error logs for details.
Event Log details: ------------------ The SQL Server Integration Services service failed to start due to the following error: The service did not respond to the start or control request in a timely fashion.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
I tried running the service using the "Local Service" and the "Local System" accounts also, but am still encountering the same error. What do I do...
Good day good people of the forum thanks for the response this is the error message i encountered "an error occured while attempting to validate the setup source files unc path. verify that you have entered a valid unc path."
Hi Is there a way to prevent this error? I'm getting it from query line: 10000 * (SELECT count(filial_cotacao) from negocios_cotacoes where filial_cotacao = cod_filial)) / (22 * 6 * (SELECT count(filial_cotacao) from negocios_cotacoes where filial_cotacao = cod_filial)),1) 'Atingimento Semestre' Thanks a lot
Some of my calculated members look like "######" in Excel and I believe it is because of divide by zero errors. I have tried right clicking on the table, selecting "Table Options" and "For error, values, show:" I have enter 0. This is not working. Does anybody know how to get rid of this.
I have the following line in a select statement which comes up with adivide by zero error.CAST(CASE Splinter_StatusWHEN 'SUR' THEN 0ELSE CASE WHEN Sacrifice>=1THEN 3*m.Premium/100-(m.Sacrifice * 3*m.Premium/100)/(m.Gross+m.Sacrifice)ELSE 0ENDEND AS Float)AS Bond2,The error happens on the section (m.Gross + m.Sacrifice) as this canequal zero and throws out the part of the calc that divides by it. Itis correct in some instances that it does so. The full SQL statementhas a large number of these expressions so I need a method I can applyto any line if possible.I know that it is mathmatically correct to error where this value iszero, but what I want to do is set the output of the entire expressionto zero if there is an error.Realistically an error such as this could happen at a few points inthe expression (or one of many others), so I need to find a way ofcatching any error in the expression and setting the return value to0. I thought of using a CASE statement, but wondered if there was abetter way of looking at this as the case statement would have tocheck each variation where it could throw an error.Any ideas ?ThanksRyan
I export data from a dozen tables of one database to another database on another server regularly and it works well. However, if i choose the option of "save SSIS package", I get the following error:
TITLE: SQL Server Import and Export Wizard ------------------------------
The ExistsOnSQLServer method has encountered OLE DB error code 0x80004005 (Client unable to establish connection). The SQL statement issued has failed.
------------------------------ BUTTONS:
OK ------------------------------
I use management studio to do this, but the servers are 2000.