Does The Configure Data Source Wizard Work For Updates,Inserts, And Deletes ?
Jun 8, 2007
Ok, I think this may have a simple answer.
Basically I have no problems in setting up QueryString/Control/etc parameters when I use SELECT in the Configure Data Source Wizard as it prompts me for the necessary parameters.
But when I try to use the Configure Data Source Wizard with an UPDATE, INSERT or DELETE it does NOT prompt me for the required parameters.
Is this a bug or am I just missing something? Do I have to put them in manually or something?
Thanks!
View 5 Replies
ADVERTISEMENT
Mar 1, 2006
I have transactional replication set up between two SQL Server 2000 databases. In some cases when I perform an UPDATE on a published table on the the publisher, SQL Server attempts to perform a DELETE followed by an INSERT on the subscriber using the stored procedures created during the initial snapshot.
Why does it do this?
How can I stop it doing this and force an UPDATE on the publisher to call the UPDATE procedure on the subscriber?
Thanks
View 3 Replies
View Related
Jan 3, 2008
I have a 14GB database whose data content is legacy and is described as static. The log file is significantly large and continues to change size mostly increasing by 2-5GB a day (~60GB now) I have observed over the past two days; it shrank once unexpectly by a few GB. The instance is hosting other databases such as: EnterpriseVaultDirectory, EnterpriseVaultMonitoring, EnterpriseVaultStore, and NetPerfMon - might these seemingly unrelated data sources be involved?
I am trying to a trace to find traffic against the tables, no such luck.
Web applications are playing against it for queries but there should be no UPDATEs beign applied. I can only suspect that other unknown applications are performing operations but have yet to find unexplained connections.
Are there any other reasons why this type of log file activity would happen merely due to queries or stored procedure calls?
Lets also state, "mirroring, indexing, replication" are not at play. I know logging "Full" is not necessary as "Simple" should suffice but I am still hunting down why UPDATEs might be getting through. I realize I might adjust the migrated SQL 2000 security model to deny updates to find what breaks but would rather not take that iniative yet.
The installation is a fresh SQL 2005 Standard setup with SP2 applied; the databases were upgraded.
View 6 Replies
View Related
May 27, 2014
I need a script that inserts the data of an excel sheet into a table. If something already exists it should leave it, unless it's edited in the excel sheet and so on and so on. This proces has to go through a stored procedure... ...But how?
View 6 Replies
View Related
Jul 6, 2006
Please help.I have a table with single row. I need to allow only UPDATEs of thetable, forbid INSERTs and DELETEs. How to achieve it?Thank you for information/RAM/
View 3 Replies
View Related
Feb 26, 2008
I need to create a table that only allows records to be inserted or deleted. Once the record has been created it can only be deleted. Is there anyway to configure a table in this manner?
Table Definition
USE [DB_AUTOMATED_PACKAGING_SYSTEM]
GO
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[TBL_PCL_LENS_DATA](
[SerialNumber] [varchar](50) NOT NULL,
[ProcessedDate] [datetime] NOT NULL,
[Filename] [varchar](50) NOT NULL,
[CartonLabelImage] [image] NOT NULL,
[ExpirationDateLabelImage] [image] NOT NULL,
[LabelSetLabelImage] [image] NOT NULL,
[ReplyCardLabelImage] [image] NOT NULL,
[TextFile] [ntext] NOT NULL,
CONSTRAINT [PK_TBL_PCL_LENS_DATA] PRIMARY KEY CLUSTERED
(
[SerialNumber] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY] TEXTIMAGE_ON [PRIMARY]
GO
SET ANSI_PADDING OFF
View 5 Replies
View Related
Nov 16, 2006
SQL 2K - SP3a - Development BoxThe environment is a piece of garbage ... triggers firing triggers firing triggers. Application is a piece of garbage that a developer want to make better (yea!) I need to put together a profile template to capture inserts and deletes into two tables. Not asking for the fish (but will accept it if necessary). Looking thru BOL, cannot find find an event class to capture insert and / or delete. Looking at TSQL event class gives SQLStmtCompleted event, and maybe I can filter on the two object IDs (object name not available because dbname not available as data column for this event.) Or if exists, but not documented, the event class for insert and delete. Any ideas?
View 1 Replies
View Related
Feb 27, 2001
It appears that SQL7 does not support options to set cascade updates and deletes in the Relations tab of the property sheet, but it is included in
View 4 Replies
View Related
May 19, 2000
Microsoft article Q142480 states "Triggers cannot be used to perform cascading updates and deletes if ForeignKey-to-PrimaryKey relationships have been extablished using SQL Server's DRI."
Does this mean that I cannot declare FK's in my scripts if I want to have triggers in the table? Do I just add a column in my table that will have a foreign key in it, but just not reference it in my script? Can someone clarify for me?
Thanks,
Nathan
View 1 Replies
View Related
May 15, 2006
When configuring the SqlDataSource, what source do I need to specify
for getting the ID passing through the URL? I tried Form but it's not
getting the ID through the URL. Help is appreciated.
View 2 Replies
View Related
Nov 20, 2007
I have a very simple SSIS task whcih opens a flat file data source, checks the first two characters of each row and if it is equal to "06", inserts that row into an OLDB destination table. However it is inserting EVERY row, even the ones not equal to "06" in first two columns. So, how do I get it to NOT insert the rows I don't want? Any help is very much appreciated and the following is my code:
Public Overrides Sub Input0_ProcessInputRow(ByVal Row As Input0Buffer)
Dim InactiveDate As String
If Left(Row.Column0, 2) = "06" Then
Row.FilingNbr = Mid(Row.Column0, 3, 10)
Row.Address1 = Mid(Row.Column0, 13, 50)
Row.Address2 = Mid(Row.Column0, 63, 50)
Row.City = Mid(Row.Column0, 113, 64)
Row.State = Mid(Row.Column0, 177, 4)
Row.Zip = Mid(Row.Column0, 181, 9)
Row.ZipExt = Mid(Row.Column0, 190, 6)
Row.AgentCountry = Mid(Row.Column0, 196, 64)
InactiveDate = Mid(Row.Column0, 264, 2) + "/" + Mid(Row.Column0, 266, 2) + "/" + Mid(Row.Column0, 260, 4)
If IsDate(InactiveDate) And InactiveDate <> "00/00/0000" Then
Row.AgentInactiveDate = InactiveDate
Else
Row.AgentInactiveDate_IsNull = True
End If
Row.AgentLastName = Mid(Row.Column0, 268, 50)
Row.AgentFirstName = Mid(Row.Column0, 318, 50)
Row.AgentMiddleName = Mid(Row.Column0, 368, 50)
Row.AgentSuffix = Mid(Row.Column0, 418, 6)
End If
End Sub
Karen
View 5 Replies
View Related
Oct 30, 2007
Hi...
I have data that i am getting through a dbf file. and i am dumping that data to a sql server... and then taking the data from the sql server after scrubing it i put it into the production database.. right my stored procedure handles a single plan only... but now there may be two or more plans together in the same sql server database which i need to scrub and then update that particular plan already exists or inserts if they dont...
this is my sproc...
ALTER PROCEDURE [dbo].[usp_Import_Plan]
@ClientId int,
@UserId int = NULL,
@HistoryId int,
@ShowStatus bit = 0-- Indicates whether status messages should be returned during the import.
AS
SET NOCOUNT ON
DECLARE
@Count int,
@Sproc varchar(50),
@Status varchar(200),
@TotalCount int
SET @Sproc = OBJECT_NAME(@@ProcId)
SET @Status = 'Updating plan information in Plan table.'
UPDATE
Statements..Plan
SET
PlanName = PlanName1,
Description = PlanName2
FROM
Statements..Plan cp
JOIN (
SELECT DISTINCT
PlanId,
PlanName1,
PlanName2
FROM
Census
) c
ON cp.CPlanId = c.PlanId
WHERE
cp.ClientId = @ClientId
AND
(
IsNull(cp.PlanName,'') <> IsNull(c.PlanName1,'')
OR
IsNull(cp.Description,'') <> IsNull(c.PlanName2,'')
)
SET @Count = @@ROWCOUNT
IF @Count > 0
BEGIN
SET @Status = 'Updated ' + Cast(@Count AS varchar(10)) + ' record(s) in ClientPlan.'
END
ELSE
BEGIN
SET @Status = 'No records were updated in Plan.'
END
SET @Status = 'Adding plan information to Plan table.'
INSERT INTO Statements..Plan (
ClientId,
ClientPlanId,
UserId,
PlanName,
Description
)
SELECT DISTINCT
@ClientId,
CPlanId,
@UserId,
PlanName1,
PlanName2
FROM
Census
WHERE
PlanId NOT IN (
SELECT DISTINCT
CPlanId
FROM
Statements..Plan
WHERE
ClientId = @ClientId
AND
ClientPlanId IS NOT NULL
)
SET @Count = @@ROWCOUNT
IF @Count > 0
BEGIN
SET @Status = 'Added ' + Cast(@Count AS varchar(10)) + ' record(s) to Plan.'
END
ELSE
BEGIN
SET @Status = 'No information was added Plan.'
END
SET NOCOUNT OFF
So how do i do multiple inserts and updates using this stored procedure...
Regards
Karen
View 5 Replies
View Related
Jun 8, 2006
Hi All,
Another requirement has cropped up with regard to picking up connection settings for data sources from an external File.
My source and target are both in SQL Server. What i need is that if my source or target changes I should just change my external file and same should reflect in my package.
How can I accomplish it? Please suggest some solution.
Thanks in advance.
Regards,
Aman Anand
View 2 Replies
View Related
Jan 22, 2001
I have a number of columns with predefined character length but user can input more from gui. i want to trucncate automatically to the desired length and insert or update the database right now it does not allow me to update , or insert the values can i do it and how this is urgent
View 2 Replies
View Related
Nov 28, 2007
Hi
I have 3 table (tbl1, tbl2, tbl3).
tbl1 colums ---Pid(autonNumber),Pcode(unique values),PGuid
tbl2 columns---Pid, CatId,Fid
tbl3 Colums----Pid,BundleId
Using Trigger(After Insert) in tbl1 to insert the data of tbl1.Pid to tbl2.Pid and tbl3.Pid . tbl1 will be uploaded with new rows and existing rows will be updated from the csv file.
Trigger in tbl1 works fine by inserting data to tbl2.Pid and tbl3.Pid.
My questions are :
1. Is it possible to use trigger to update tbl2 and tbl3 if records exist if not insert new record to colum Pid in tbl2 and tbl3 from Pid of tbl1
2.Or is it possible to use sql procedure to do cascaded updates or inserts by merging datasets from tables and csv file using asp.net
3.Or How can I use single Trigger to insert if not exist and update if data exist.
4.Or Do I have to use two trigger one for insert and one for update. If this is the case how do check for data existance.
After insert Triger I am using at the moment is below (replied as an answer in this forum for my previous thread)
create trigger t1 on tbl1
after insert
as
begin
declare @id int
select @id=pid from inserted
insert into tbl2(pid) values(@id)
insert into tbl3(pid) values(@id)
end
View 5 Replies
View Related
Sep 15, 2006
Hi, i have the following sp. im using vs.net2005, sqlserver2005.
now how do i implement functions like - > okay using datasets, exception is thrown that the row has been modified and i get to inform the user, reload the modified row, .
how do i get same functionality using sp? is that possible ? how/
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
go
ALTER Procedure [dbo].[sp_Insert_Or_Update_Bill]
@BillID_All uniqueidentifier,
@BillID uniqueidentifier,
@Pono nvarchar(25),
@Date_ smalldatetime,
@SupplierCode nvarchar(25),
@Reference nvarchar(25),
@AmountType nchar(10),
@BillType nvarchar(25),
@TypeCode nchar(10),
@AmountFC decimal(18,2),
@ROE decimal(9,2),
@Currency nchar(5),
@LinkBill uniqueidentifier,
@multiplicityID uniqueidentifier,
@payment_or_bill smallint
as
If Exists(Select * from bill where billid_all= @BillID_All and amounttype = @amounttype)
begin
update bill
SET [BillID_All] = @BillID_All
,[BillID] = @BillID
,[Pono] = @Pono
,[Date_] = @Date_
,[SupplierCode] = @SupplierCode
,[Reference] = @Reference
,[AmountType] = @AmountType
,[BillType] = @BillType
,[TypeCode] = @TypeCode
,[AmountFC] = @AmountFC
,[ROE] = @ROE
,[Currency] = @Currency
,[LinkBill] = @LinkBill
,[multiplicityID] = @multiplicityID
,[payment_or_bill] = @payment_or_bill
where billid_all= @BillID_All and amounttype = @amounttype
end
else
if not @AmountFC = 0
begin
begin
INSERT INTO [Costing].[dbo].[Bill]
([BillID_All]
,[BillID]
,[Pono]
,[Date_]
,[SupplierCode]
,[Reference]
,[AmountType]
,[BillType]
,[TypeCode]
,[AmountFC]
,[ROE]
,[Currency]
,[LinkBill]
,[multiplicityID]
,[payment_or_bill])
VALUES
(@BillID_All
,@BillID
,@Pono
,@Date_
,@SupplierCode
,@Reference
,@AmountType
,@BillType
,@TypeCode
,@AmountFC
,@ROE
,@Currency
,@LinkBill
,@multiplicityID
,@payment_or_bill)
end
end
View 1 Replies
View Related
Sep 12, 2006
I am attempting to insert information from Visual Web Developer 2005 using either the Gridview or Datalist controls into a SQL Server 2005 database and get stuck when defining the custom statement.When I enter the text within the insert tab, the <next> button remains greyed out, preventing me from continuing to the next page.If I copy the same text into the select tab, then I can continue with the wizard, however this raises other problems which may or may not be related (multiple insertions of the data into the SQL Server database table - possibly due to postback functions). I would rather use insert to confirm that my second problem is not because I am using the wrong option.My question is:Should I be able to use the insert function within VWD express or is this only available within the standard/pro editions?
View 2 Replies
View Related
Nov 22, 1999
Is there a way to switch off transaction logging for insert and update statements and not only for select into bulk copy?
View 1 Replies
View Related
May 26, 1999
Can someone point me to some code that properly prepares a string for an INSERT or UPDATE into a char or varchar column? I need to be able to handle single & double quotes and any other possible issues. thanks
View 1 Replies
View Related
Oct 30, 2007
Hi All,
I'm a relative novice on SQL Server and am a complete beginner at SQL, so am looking for a little help.
I currently use a DTS package to perform inserts / updates to a "production" table.
The DTS package transforms a comma separated file into a "temporary" table that is truncated / cleared before the load starts.
The temporary table has a column denoting Insert or Update. The production table is almost identical, however, doesn't contain the Insert / Update column. The DTS package then, depending upon the Insert / Update flag, either inserts data into the production table or updates data in the production table.
When the DTS package has completed, I'd like to be able to run an SQL Query that validates everything in the "temporary" table is identical to that in the "production" table, which it should be.
I have managed to do some queries to verify that everything has loaded / updated i.e. select primary_key from temporary table where primary_key not in (select * from production table), however, what I haven't been able to do is verify that all the columns on the temporary table match the values in the production table (excluding the Insert / Update flag).
I tried concatenating the columns in each table and comparing the concatenated values, however, this failed due to the different data-types, i.e. decimal, text etc.
Any help will be greatly appreciated.
Many thanks.
Cheers,
David
View 8 Replies
View Related
Nov 5, 2007
I am looking for pros and cons for the following scenarios:
When a table contains a unique key constraint is it viable to always do an insert and immediately check the @@ERROR value and if @@ERROR states a duplicate key exception then perform an update statement?
Another possible solution would be to always check if the key exists and then do the insert / update based upon that result. This method will always require two steps.
View 4 Replies
View Related
Apr 2, 2007
Hi:
We have a weird problem in our test SQL 2005 SP1 - Windows 2003 Enterprise SP1 - Server (after upgrading from SQL 2000).
While changing data via JBOSS - JDBC connection, we get all our data modifications rolled back.
Selects are fine. Same SQL 2005 Inserts/Updates through JBOSS are fine on other machines with Windows XP (JBOSS is on the same machine there, while in troubled configuration it's on its own server).
But in production imitation environment we can't modify data.
Please advise where to look for the solution.
Thanks.
View 2 Replies
View Related
Apr 27, 2007
Hi All,
Do you have any idea why I am not getting any ODBC in import / export Data Source list???
I am trying to link connection with Informix Server through ODBC, same ODBC is working good with ACCESS.
I am using SQL Express 2005
Using Windows Authentication
Thanks for your help in advance
AA
View 11 Replies
View Related
Aug 15, 2006
Hi,Before stepping into ado.net code to perform an insert or update, the insert / update has already taken place, just on starting the debugger. I use VS 2005 on SQL Server 2000. This did not happen with VS 2003 and SQL Server 2000.Anyone else encountered this?
View 2 Replies
View Related
Sep 6, 2005
Hello people!Here is the situation:We have an old propriatary database that is used for daily tasks. Not much we can do with it, but we have to use it.I can create basically a read only connection to it through ODBC.I would like to, on a timed interval copy certain data for reporting from this slow thing to my SQL server so that I can learn to program, and create some cool reports etc without having to wait on this server all day.So here is what I don't quite understand.I had originally planned on just deleting the contents of the tbl on my SQL server just before I populated it each time, but found out that my AutoNumber field will continue to increase, and I'm assuming that eventually I'm going to run into a problem as a result.Should I be doing some kind of update instead? if so do I need to first CHECK if the record exisit, if not then do an insert, if so do an update type thing?Or is there a way to basically do it in one command?I hope this makes sense. I would show you some code but there really isn't much to show you other than my insert statement :->Thanks for any advice!Josh
View 5 Replies
View Related
Mar 11, 2002
I am kinda new with SQL and am trying to get a count of on the number of updates and or inserts to any given or group of tables and cannot get the syntax correct...can anyone help with this?
Thank you in advance.
Colin P.
View 1 Replies
View Related
Jul 20, 2005
Hopefully someone can at least point me in the right direction for moreresearch (e.g.: correct terminology). My only previous experience was justdumping data into a database using ODBC, and that was some years ago so nowmostly forgotten.I need to write an NT Service/Application (in C/C++) that will be gettingdata sent to it via SQL Server 2000. The data will arrive in my SQL Server(read-only access), via replication of tables from another remote SQLServer.My application needs know when new row are inserted, or updated so it can toread this data (needs to be quick/timely so hopefully no polling) to theninterface with other remote proprietary systems.T.I.A.PS: If you can recommend appropriate books on SQL Server 2000 that wouldalso be useful.
View 2 Replies
View Related
Jul 20, 2005
Hello,Can someone point me to getting the total number of inserts and updates on a tableover a period of time?I just want to measure the insert and update activity on the tables.Thanks.- Vish
View 3 Replies
View Related
Oct 23, 2007
Hi all,
This managed application was written to run on a Symbol 3090 Win CE 5.0 scanning device. We are using the symbol provided classes to access the scanning interface, and SQL Compact database on the device to collect the scanned data, and then using merge replication to synchronize scanned data when the device is docked. The problem we have experienced seems to be releated to the performance when inserting and updating records in the database.
We have tested some randomly generated 1000 records and inserting/updatating into a database. At first the time to commit a record increases when the database is flushing into the memory (The flush interval in the connection string property is 10 seconds by default). and then as the database size grows increasing the time to commit every single record which is causing the application to perform slowly as they scan items into the database. However, the device program memory remains consistant as they are scan items. From our tests, I found the time to execute either a update/insert command on 2MB sqlMobile database (upto 10000 records, depending on the size of the columns) is taking nearly 2 to 2 and half seconds to complete. Below is the only code I am executing,
If Not sqlObj.UpdateItem(1061022, itemNo, 1) Then
sqlObj.InsertResultSet(1061022, itemNo, itemObj.Style, itemObj.Color, itemObj.Size, itemObj.Description, 0, 1)
End If
For the notes, I am using prepared updated command and resultset.insert methods to perform update and insert commands into the database.
Any help on this issue is highly appreciated.
Thanks
Ravi.
View 1 Replies
View Related
Apr 16, 2007
I want to measure updates/Insertion rate of my databse in order to measure that how percent the databses is booked for insert and update.
can some one can suggest me the mechanism or other resource for doing this work...
thanxs in advance
View 4 Replies
View Related
Sep 7, 2006
Hi All,
I want to connect to SQLExpress database on the network. I can do so using code but I want to use the Data Source Configuration Wizard. It seems this only works for local instances of SQL server. Is this true?
I can connect just fine to the database on the network using Microsoft SQL Server Management Studio Express...for what this is worth.
I have tried to map a drive to the SQL server machine and pick the mdf file but I get the error msg of network path is not supported for database files....I have turned on allow remote connections, allow tcp/ip, named pipes, added sqlserv.exe and sqlbrowser.exe to my firewall exceptions ect..
I want to be able to use Table Adapters, SqlDataAdapters ect. After reading numerous forum questions/ kb articles this seems to be a common problem. I am on the verge of just saying forget it and use MS Access instead.
Thanks in advance!
View 4 Replies
View Related
Nov 21, 2007
Hi,
I have the following problem: Within a VBScript, I use a component (written in C++ I think with use of ADO) for sending "Insert", "Update" Statements to an SQL Server 2000 for inserting, updating data. If I insert 100 - 120 Records in a Loop, all works fine. If I insert 1000 records, approximately 150 records will be inserted very quick, then the program pause fo approx. 8 - 15 minutes and then it proceed for the next 150 recs, pause for 8 - 15 minutes and so on.
If I use a SQL Server 2005 for the database, all works fine. The same happens with another customer and another program written in Visual Basic 6.0 with ADO. The access to SQL 2000 pause and with SQL 2005 all works fine. It seems to me that this is a problem with some buffers, timeout, or so. Has anyone an idea on what screw I can turn?
Thanks
Hans
View 1 Replies
View Related
Oct 12, 2007
I am trying to import an Excel file into SQL Server 2005 using the SSIS import/export wizard; however, Microsoft Excel doesn't show up in the list of the data sources. I am assuming that something else must be install from either Microsoft Office or SQL Server 2005. I am using Microsoft Office 2003 on a Window XP machine. Does anyone know what I need to do to correct this.
Thanks,
Tim
View 11 Replies
View Related
