Dynamic Cursor Generation..
Jul 20, 2005
Hi Everybody,
I have a probs with dynamic generation.
I am writing the probs
======================================
create proc test
as
declare @query varchar(500)
set @query = 'select * from table'
----------------------------------------------
declare mycur Cursor for Select * from table |
open mycur |
----------------------------------------------
but instate of above block how can I dynamically generate this query?
---------------------------------------
declare mycur Cursor for exec (@query) |
---------------------------------------
Or tell me the way.
Regards
Arijit Chatterjee
View 2 Replies
ADVERTISEMENT
Jul 20, 2005
Hello,I have a test database with table A containing 10,000 rows and a tableB containing 100,000 rows. Rows in B are "children" of rows in A -each row in A has 10 related rows in B (ie. B has a foreign key to A).Using ODBC I am executing the following loop 10,000 times, expressedbelow in pseudo-code:"select * from A order by a_pk option (fast 1)""fetch from A result set""select * from B where where fk_to_a = 'xxx' order by b_pk option(fast 1)""fetch from B result set" repeated 10 timesIn the above psueod-code 'xxx' is the primary key of the current Arow. NOTE: it is not a mistake that we are repeatedly doing the Aquery and retrieving only the first row.When the queries use fast-forward-only cursors this takes about 2.5minutes. When the queries use dynamic cursors this takes about 1 hour.Does anyone know why the dynamic cursor is killing performance?Because of the SQL Server ODBC driver it is not possible to havenested/multiple fast-forward-only cursors, hence I need to exploreother alternatives.I can only assume that a different query plan is getting constructedfor the dynamic cursor case versus the fast forward only cursor, but Ihave no way of finding out what that query plan is.All help appreciated.Kevin
View 1 Replies
View Related
Nov 7, 2007
Dynamic SQL generation for the UpdateCommand is not supported against a SelectCommand that does not return any key column information.
I am getting the above error if i try to create a update command through a Command builder in .net cf on a SQLCE 3.0 database
The Select query I used for creating the update command is 'SELECT * FROM Users'
I populated a datatable with the above query through a DataAdapter, to check for the primary key and the primary key was available in the table. But still the CB could not able to create an Update Command for that query,
The Primary Key column that I use is of type GUID
Then when try to do the above job using a Typed DataSet with TableAdapters , then it throws the following error
'Update requires a valid UpdateCommand when passed DataRow Collection with modified rows'
can any one please tell me a way to fix this ,
Thanks and Regards
Varadan
View 6 Replies
View Related
Jan 14, 2008
Hi, I'm having a problem with my code,I am doing the following - retrieving a field from a table, which is linked to another table, i'm only updating one of the fields in one of the two tables...
Code: ( text )
View 1 Replies
View Related
Feb 1, 2007
Hey,
I changed the database name in the initial cataloge in the web.config conncetion string so that it now connects to other databas that contains same tables as the old one,but now i am getting that error at the update stmt !
thank u in advance
Hiba
View 1 Replies
View Related
Oct 24, 2004
I've looked up Books Online on Dynamic Cursor/ Dynamic SQL Statement.
Using the examples given in Books Online returns compilation errors. See below.
Does anyone know how to use Dynamic Cursor/ Dynamic SQL Statement?
James
-- SQL ---------------
EXEC SQL BEGIN DECLARE SECTION;
char szCommand[] = "SELECT au_fname FROM authors WHERE au_lname = ?";
char szLastName[] = "White";
char szFirstName[30];
EXEC SQL END DECLARE SECTION;
EXEC SQL
DECLARE author_cursor CURSOR FOR select_statement;
EXEC SQL
PREPARE select_statement FROM :szCommand;
EXEC SQL OPEN author_cursor USING :szLastName;
EXEC SQL FETCH author_cursor INTO :szFirstName;
--Error--------------------
Server: Msg 170, Level 15, State 1, Line 23
Line 23: Incorrect syntax near ';'.
Server: Msg 1038, Level 15, State 1, Line 24
Cannot use empty object or column names. Use a single space if necessary.
Server: Msg 1038, Level 15, State 1, Line 25
Cannot use empty object or column names. Use a single space if necessary.
Server: Msg 170, Level 15, State 1, Line 27
Line 27: Incorrect syntax near ';'.
Server: Msg 170, Level 15, State 1, Line 30
Line 30: Incorrect syntax near 'select_statement'.
Server: Msg 170, Level 15, State 1, Line 33
Line 33: Incorrect syntax near 'select_statement'.
Server: Msg 102, Level 15, State 1, Line 35
Incorrect syntax near 'author_cursor'.
Server: Msg 170, Level 15, State 1, Line 36
Line 36: Incorrect syntax near ':'.
View 2 Replies
View Related
Jun 10, 2004
I need to pass a list of values into a cursor as such...
DECLARE
@group_SQL varchar(255)
SET @group_SQL = 'SELECT group_id FROM groups where group_id in (' + @group_id + ')'
DECLARE groupContact_import_cursor CURSOR
FOR EXEC(@group_SQL)
OPEN groupContact_import_cursor
FETCH NEXT FROM groupContact_import_cursor INTO @group_id
WHILE (@@FETCH_STATUS = 0)
BEGIN
insert into groupContacts (group_id, contact_id) values (@group_id, @new_cid)
FETCH NEXT FROM groupContact_import_cursor INTO @group_id
END
CLOSE groupContact_import_cursor
DEALLOCATE groupContact_import_cursor
But MS SQL doesn't seem to like the FOR EXEC(@group_SQL). Can someone shed some light?
TIA
View 5 Replies
View Related
Mar 17, 2004
I am trying to use a dynamic cursor in a stored procedure:
The code looks like this :
/************************************************** ***
set @sFormula = 'Monthlyformula'
set @sStartDate = '02/01/2004'
set @sEndDate = '02/01/2004'
exec('DECLARE APPGRIDROWS_METRICS CURSOR FOR select populateid From appgridrows where histdisplaygrid = 3 And '+ @sFormula +' Is Null and exists (SELECT 1 From PAYROLL_DATA_PERIOD as h Where h.id=1 and h.populateid=appgridrows.populateid and h.StartDate between '+ @sStartDate +' and '+ @sEndDate +')' )
/************************************************** ***
And this is what it is interpreting
select populateid From appgridrows where histdisplaygrid = 3 And Monthlyformula Is Null and exists (SELECT 1 From PAYROLL_DATA_PERIOD as h Where h.id=1 and h.populateid=appgridrows.populateid and h.StartDate between 02/01/2004 and 02/01/2004)
My problem is Is there anyway that I can put the quotes before those dates('02/01/2004') so that my cursor has some records returned
Thanks in advance
SK
View 4 Replies
View Related
Sep 23, 2005
Dear folks,
In My Query i am using where in condition .It return multiple record .I want store it in to cursor and perform the operation.
Declare @sql varchar(5000);
set @sql='select * from Role where Role_id in('+ @role_ids +')';
Exec @sql;
I want take this record set in to cursor .How to do it.
please help me.
View 12 Replies
View Related
May 26, 2007
Hi All€¦
I need to bind a DataGrid to server dynamic cursor.
Please help!
View 1 Replies
View Related
Jul 23, 2002
Hello..
Can you declare a cursor with dynamic SQL?
I have a situation where the SQL for my cursor MUST be assembled in a buffer, but I cannot get the cursor declaration to accept my buffer as the SQL statement.
these attempts did not work:
DECLARE crsCursor CURSOR FOR @vchrSQL
DECLARE crsCursor CURSOR FOR (@vchrSQL)
Does anybody know if you definitely can or definitely cannot use dynamic SQL with cursors?
View 1 Replies
View Related
May 14, 2008
Hi all
I am trying to do dynamic Select for Cursor. The dynamic would be like this:
IF CONDITION1 IS TRUE:
SELECT CustomerTenderID, CustomerSiteID, ContractPeriod, SupplierID
FROM dbo.tnd_TenderSiteRateConsumptionView
WHERE CustomerTenderID = @CustomerTenderID
IF CONDITION2 IS TRUE:
SELECT CustomerTenderID, CustomerSiteID, ContractPeriod, SupplierID
FROM dbo.tnd_TenderSiteRateConsumptionView
WHERE CustomerTenderID = @CustomerTenderID AND
CustomerSiteID = @CustomerSiteID
etc etc
Here's the cursor
DECLARE RateList CURSOR FOR
SELECT CustomerTenderID, CustomerSiteID, ContractPeriod, SupplierID
FROM dbo.tnd_TenderSiteRateConsumptionView
WHERE (BASED ON CONDITION)
ORDER BY CustomerTenderID,
CustomerSiteID,
SupplierID,
ContractPeriod
OPEN RateList
FETCH NEXT FROM RateList
INTO@CustomerTenderID, @ReturnedCustomerSiteID, @ReturnedContractPeriod, @ReturnedSupplierID
WHILE @@FETCH_STATUS = 0
BEGIN
SET @rowNum = @rowNum + 1
-- DO SOME FUNKY STUFF
FETCH NEXT
FROM RateList
INTO@CustomerTenderID, @ReturnedCustomerSiteID, @ReturnedContractPeriod, @ReturnedSupplierID
View 4 Replies
View Related
Jul 20, 2005
Help please,Have a situation when converting from Oracle SP's to SQL SP's. The oldoracle cursor was roughly as followsCURSOR cur_rsStock ISselect*from(select StockRowId, CategoryIdfromSTOCKDISPOSABLEwhereSTOCKDEFID=numDefIdORDER BYSTOCKROWID)whereROWNUM <= numQuantity;The closest I can get in MS SQL is as follows :declare cur_rsStockCURSOR forselect top @numQuantityStockRowId, CategoryIdfromSTOCKDISPOSABLEwhereSTOCKDEFID=numDefIdORDER BYSTOCKROWIDBut, SQL doesn't allow variables next to top. I know I can assign the wholeselect statement to a string and use exec to exec the string to get arecordset but how can I point a cursor to receive its output?i.e.set @strSQl = select top ' + @numQuantity + ' StockRowId, CategoryId.......exec @strSQLbut how do I dodeclare cur_rsStockset cur_rsStock = ( exec @strSQL)Flapper
View 4 Replies
View Related
Apr 27, 2006
Hi,is it possible to create a cursor from a dynamic string?Like:DECLARE @cursor nvarchar(1000)SET @cursor = N'SELECT product.product_idFROM product WHERE fund_amt > 0'DECLARE ic_uv_cursor CURSOR FOR @cursorinstead of using this--SELECT product.product_id--FROM product WHERE fund_amt > 0 -- AND mpc_product.status= 'aktiv'Havn't found anything in the net...Thanks,Peppi
View 5 Replies
View Related
Oct 6, 2006
Hello everybody!I have a small table "ABC" like this:id_position | value---------------------------1 | 112 | 223 | 33I try to use a dynamic cursor as below.When the statement "order by id_position" in declare part of the cursor_abcis omitted - cursor work as it should.But when the statement "order by id_position" is used, cursor behave asstatic one.What's the matter, does anybody know?Code:declare @id_position as int, @value as intDECLARE cursor_abc CURSORFORselect id_position, value from abcorder by id_positionset nocount onopen cursor_abcFETCH NEXT FROM cursor_abcINTO @id_position, @valueWHILE @@FETCH_STATUS = 0BEGINprint @id_positionprint @valueprint '----------------------------'update abc set value=666 --next reading should give value=666FETCH NEXT FROM cursor_abcINTO @id_position, @valueENDCLOSE cursor_abcDEALLOCATE cursor_abcGORegardsLucas
View 2 Replies
View Related
Sep 18, 2006
Hi,
I am declaring the cursor based on a query which is generated dynamically. but it is not working
Declare @tempSQL varchar(1000)
--- This query will be generated based on my other conditon and will be stored in a variable
set @tempsql = 'select * from orders'
declare cursor test for @tempsql
open test
This code is not working.
please suggest
Nitin
View 12 Replies
View Related
Jul 23, 2015
i read in the SET ROWCOUNT documentation URL.... that 'The ROWCOUNT option does not affect dynamic cursors', it does affect my dynamic cursor created in a table function which looks like this :
CREATE FUNCTION MyTableFunction()Â
RETURNS @MyTable TABLE (MYFIELD INTEGER)
AS
BEGIN
 DECLARE @xxx INTEGER
 DECLARE My_Cursor CURSOR DYNAMIC FOR
Â
[code]...
I would like the number of rows retruned by MyTableFunction limited to 2, but NOT the inside proc cursor's select !Set Rowcount 0 is forbidden in table function. I cannot use TOP in select * from MyTableFunction instead of setting ROWCOUNT to 2. I'm using SQL Server 2008 or 2012.
View 3 Replies
View Related
Jul 9, 2006
I need im my aplication to meke a "Cursor" in a execution of a stored procedure.
For sample:
In a table with a report definition I have the "Fileds, From, Group, Order " clausulas and I need make a cursor with a contents of this fileds.
How can I do ???
My code:
Declare @idRelat int, @cmd_FROM nvarchar(1024), @cmd_Det nvarchar(50)
SELECT @idRelat = idRelat, @cmd_Det = cmd_DET
FROM Relatórios WHERE Nome = @p_Relat
Declare @Tot_Col smallint, @Tot_Lin smallint, @Campos smallint,
@Aux_Select nvarchar(1024), @Aux_Group nvarchar(1024), @Aux_Order nvarchar(1024)
Select @Tot_Col = 0
Select @Tot_Lin = 0
Select @Campos = 0
Select @Aux_Select = "SELECT " + @cmd_DET + "AS Soma"
Select @Aux_Group = "GROUP BY "
Select @Aux_Order = "ORDER BY "
Declare @a_Local char(1), @a_Linha smallint, @a_Campo nvarchar(50)
Declare cur_Aux insensitive cursor for
SELECT Local, Linha, Campo
From Relatórios_Margens
WHERE (idRelat = @idRelat)
ORDER BY Local, Linha
Open cur_Aux
Fetch cur_Aux into @a_Local, @a_Linha, @a_Campo
While @@FETCH_status = 0 begin
If @a_Local = "C"
Select @Tot_Col = @Tot_Col + 1
Else
Select @Tot_Lin = @Tot_Lin + 1
Select @Campos = @Campos + 1
If @Aux_Group <> "GROUP BY " begin
Select @Aux_Group = @Aux_Group + ", "
If @Aux_Order <> "ORDER BY " begin
Select @Aux_Order = @Aux_Order + ", "
Select @Aux_Select = sSelect + ", " + @a_Campo + " AS Campo" + @Campos
Select @Aux_Group = @Aux_Group + @a_Campo
Select @Aux_Order = @Aux_Order + @a_Campo
Fetch cur_Aux into @a_Local, @a_Linha, @a_Campo
End
Select @Aux_Select = @Aux_Select
-- <<<< MONTA COMANDO SQL
Select @Aux_Select = @Aux_Select + " " + @cmd_FROM + " " + @p_Filtro + " " + @Aux_Group + " " + @Aux_Order
Declare @Cursor_Aux cursor
Set @Cursor_Aux = cursor for @Aux_Select
Open @Cursor_Aux
Not working !!!!
View 1 Replies
View Related
Apr 21, 2008
Hi,
In a stored procedure (SP1) I call another stored procedure (SP2), passing along parameters. In SP2 I dynamically build cursor c1. I can execute SP2 without any problems but when I start SP1 I get the following message:
Msg 16916, Level 16, State 1, Procedure SP2, Line 114
A cursor with the name 'C1' does not exist.
Yes, the cursor is of type GLOBAL. I am sure I miss something here ...
Any help is highly appreciated !
Thanks: Peter
View 1 Replies
View Related
Jun 29, 2015
The requirement is create a sql script(1 proc or cursor) which will create multiple procedures dynamically.
Table A
Col1Â
Col2
A
Alpha
For Example: If table A has 3 rows(distinct) so 3 procedures will be created dynamically.
Result:Â
1 PROC_A_ALPHA
2Â PROC_B_BETA
3Â PROC_C_charlie
View 6 Replies
View Related
Oct 3, 2006
Hi all.
I am stuck in a bit of a conundrum for quite a while now, and I hope someone here will help me figure this one out.
So, first things first: let me explain what I need to do. I am
designing a web application that will allow users to consult info
available in a SQL2000 database. The user will enter the search
criterea, and hopefully the web page will show matching results.
The problem is the results shown aren't available per se in the DB, I
need to process the data a bit. I decided to do so on the SQL Server
side, though the use of cursors. So, when a user defines his search
criteria, I run a stored procedure that begins by building a dynamic
sql query and creating a cursor for it. I used a global cursor in order
to do so. It looked something like this:
SET @sqlQuery = ... (build the dinamic sql query)
SET @cursorQuery = 'DECLARE myCursor CURSOR GLOBAL FAST_FORWARD FOR ' + @sqlQuery
EXEC @cursorQuery
OPEN myCursor
FETCH NEXT FROM myCursor INTO ...
CLOSE myCursor
DEALLOCATE myCursor
This works fine, if there's only one instance of the
stored procedure running at a time. Should another user connect to the
site and run a search while someone's at it, it'll fail due to the
atempt to create a cursor with the same name.
My first thought was to make the cursor name unique, which led me to:
...
SET @cursorName = 'myCursor' + @uniqueUserID
SET @cursorQuery = 'DECLARE '+ @cursorName + 'CURSOR FAST_FORWARD FOR ' + @sqlQuery
EXEC @cursorQuery
...
The problem with this is that I can't do a FETCH NEXT FROM @cursorName since
@cursorName is a char variable holding the cursor name, and not a
cursor variable. So to enforce this unique name method the only option
I have is to keep creating dynamic sql queries and exucting them. And
this makes the sp a bitch to develop and maintain, and I'm guessing it
doesn't make it very performant.
So I moved on to my second idea: local cursor variables. The problem with
this is that if I create a local cursor variable by executing a dynamic
query, I can't extract it from the EXEC (or sp_executesql) context, as
it offers no output variable.
I guess my concrete questions are:
Is it possible to execute a dynamic sql query and extract a (cursor) variable from it?Is it possible to populate a local cursor variable with a global cursor, by providing the global cursor's name?Can I create a local cursor variable for a dynamic sql query? How?
Anybody sees another way arround this?Thanks in advance,
Carlos
View 3 Replies
View Related
Apr 16, 2015
I need to find all uses of special characters in a database. I used the following code to do this:
USE dbName
GO
IF OBJECT_ID('tempdb.dbo.#Results') IS NOT NULL DROP TABLE #Results
GO
[code]...
This will check all tables in the database, but if you want to check specific tables you can uncomment the line in the where clause and specify tables to be checked. The query will return any text fields that have any characters other than letters, numbers or spaces.
This code works fine for me because all the tables in my database have single column primary keys. However I know how much Jeff Moden hates cursors or RBAR queries, so my question is could this have been done by any method other than using a cursor?
View 9 Replies
View Related
Aug 12, 2015
In MSDN file I read about static cursor
STATIC
Defines a cursor that makes a temporary copy of the data to be used by the cursor. All requests to the cursor are answered from this temporary table in
tempdb; therefore, modifications made to base tables are not reflected in the data returned by fetches made to this cursor, and this cursor does not allow modifications
It say's that modifications is not allowed in the static cursor. I have a questions regarding that
Static Cursor
declare ll cursor global static
           for select name, salary from ag
 open ll
            fetch from ll
Â
             while @@FETCH_STATUS=0
              fetch from ll
               update ag set salary=200 where 1=1
Â
  close ll
deallocate ll
In "AG" table, "SALARY" was 100 for all the entries. When I run the Cursor, it showed the salary value as "100" correctly.After the cursor was closed, I run the query select * from AG.But the result had updated to salary 200 as given in the cursor. file says modifications is not allowed in the static cursor.But I am able to update the data using static cursor.
View 3 Replies
View Related
Sep 20, 2007
I'm trying to implement a sp_MSforeachsp howvever when I call sp_MSforeach_worker
I get the following error can you please explain this problem to me so I can over come the issue.
Msg 16958, Level 16, State 3, Procedure sp_MSforeach_worker, Line 31
Could not complete cursor operation because the set options have changed since the cursor was declared.
Msg 16958, Level 16, State 3, Procedure sp_MSforeach_worker, Line 32
Could not complete cursor operation because the set options have changed since the cursor was declared.
Msg 16917, Level 16, State 1, Procedure sp_MSforeach_worker, Line 153
Cursor is not open.
here is the stored procedure:
Alter PROCEDURE [dbo].[sp_MSforeachsp]
@command1 nvarchar(2000)
, @replacechar nchar(1) = N'?'
, @command2 nvarchar(2000) = null
, @command3 nvarchar(2000) = null
, @whereand nvarchar(2000) = null
, @precommand nvarchar(2000) = null
, @postcommand nvarchar(2000) = null
AS
/* This procedure belongs in the "master" database so it is acessible to all databases */
/* This proc returns one or more rows for each stored procedure */
/* @precommand and @postcommand may be used to force a single result set via a temp table. */
declare @retval int
if (@precommand is not null) EXECUTE(@precommand)
/* Create the select */
EXECUTE(N'declare hCForEachTable cursor global for
SELECT QUOTENAME(SPECIFIC_SCHEMA)+''.''+QUOTENAME(ROUTINE_NAME)
FROM INFORMATION_SCHEMA.ROUTINES
WHERE ROUTINE_TYPE = ''PROCEDURE''
AND OBJECTPROPERTY(OBJECT_ID(QUOTENAME(SPECIFIC_SCHEMA)+''.''+QUOTENAME(ROUTINE_NAME)), ''IsMSShipped'') = 0 '
+ @whereand)
select @retval = @@error
if (@retval = 0)
EXECUTE @retval = [dbo].sp_MSforeach_worker @command1, @replacechar, @command2, @command3, 0
if (@retval = 0 and @postcommand is not null)
EXECUTE(@postcommand)
RETURN @retval
GO
example useage:
EXEC sp_MSforeachsp @command1="PRINT '?' GRANT EXECUTE ON ? TO [superuser]"
GO
View 7 Replies
View Related
Oct 3, 2000
I have a quick question regarding SQL Server Enterprise Manager. I'm looking at setting up a job to automatically create DDL for a user database. This will be done along with our normal nightly backup routine.
I'm very familiar with using EM to create SQL scripts, but is there anyway to schedule this task? I've considered DTS and some type of scheduled package, but can't seem to find anything similar. I'm thinking I may need a custom task.
Could someone please shed some light on the subject? If not from within EM, how about any third party tools? FYI - I already own the Embarcadero suite and am trying it out wwith that.
Thank You.
Anthony Robinson
View 10 Replies
View Related
Jul 11, 2007
hi
I want to generate excel file which contain table name , column name,datatype ,size
how we can do in sql server
is there any way
pleases tell the steps
View 2 Replies
View Related
Nov 3, 2007
Server:
SQL 2005 SP2 on Win 2003 Ent. SP1
A 3rd part app is requiring that I create a credential, whick in turn requires an SMK be set. When I try to create the credential, I get an error message indicating a decryption error. When I run the alter command to regenerate the key (without force) it throws an error indicating the key cannot be decrypted. According to a KB article I found, this may indicate that a key has never been generated.
My question is, I have a number of production databases in this instance, including SQL Reporting Services. Except for the SRS DB's, all other user db's are simple db's that don't use encryption. If I run the Force command to generate the key, am I going to break anything? I'm really concerned about report servioces.
Thanks.
View 5 Replies
View Related
Apr 28, 2004
I need a tool to generate sql code of database including all data like "insert into table values()". Same as sql file in IBuySpy portal. How can I generate a file like this? I tried with enterprise manager but it doesn't generate insert statements and default values of some fileds lost.
Can someone help me?
View 1 Replies
View Related
Feb 7, 2005
Hello all,
I have a data driven subscription with the information about the file name/file extension/ path etc coming in from a database. The problem is that the subscription status after running tells me that things are done and there is no error but the file is not being generated in the specified directory and for that reason the file is not generated at all anywhere on the hard disk. can anybody please help.
The information in the database for the report is as follows
FileName : Test1
FileExtn : True
Path = \ram\C$Reports
Render_Format = PDF
Username = Administrator
Password = password
Writemode = Overwrite
All the fields are varchar(50) in size.
View 1 Replies
View Related
Dec 5, 2007
Hi,
How to create surrogate key in a dimension table?
What transformations can be used to create it?
View 6 Replies
View Related
Sep 13, 2005
Hi all,I am following the procedure where I generate XMLs of tables and put itin a DataSet and read that dataset back into another database to bewritten into the tables.Although I am VERY close to completion a small problem that I am facingis that the XMLs being generated have as the table name "table" and notthe actual names.Is this a known issue or am I amiss? and, does anyone have a solutionfor this?Thank you.*** Sent via Developersdex http://www.developersdex.com ***
View 1 Replies
View Related
Sep 13, 2005
Hi guys,Apologies Simon for not making it clearer last time. What i am doing isreading a table from the SQL Server 2000 database and using:SQLDataSet.WriteXml(strFileName, XmlWriteMode.WriteSchema);to write to the DataSet. But I realised that when I do that the XML isgenerated correctly, the only error being that<xs:element name="Table"> comes in as the tablename instead of theactual table name.Any suggestions will be appreciated. Thank you.*** Sent via Developersdex http://www.developersdex.com ***
View 1 Replies
View Related
Jul 20, 2005
HelloFor my client, I need to generate reports from the information storedin the database. The client has fixed format forms (on paper e.g. USCustoms forms etc).Will I need to redesign the forms in the application and then show theinformation?Another approach is to scan the forms as image and print theinformation on top of that image, so when it is printed , theinformation will be displayed at the right places.Is there any other way? How is the reporting done if the forms arepre-defined and the information is stored in a databaseThanks for your input
View 1 Replies
View Related
