Hello,I was wondering if it is possible to dynamically execute a stored procedure; for example, in SQL, you can do:insert into Table1( id, name)select id, namefrom Table2Can you do something like:exec spProc @id = id, @name = namefrom Table1Or something like that? I know I can select a row at a time and execute, or write a program, but I was looking to see if there was an easier way.Thanks.
View 1 RepliesI have a column in a table, which have the stored procedure name stored in each row. Now, I need to execute each SP in the table dynamically. I'm trying to construct a SQL but not able to fire them!!
DECLARE @sql VARCHAR(MAX)
SELECT @sql = STUFF((SELECT '; GO EXEC ' + StoredProcedureName + '' FROM MyTable FOR XML PATH ('')),1,5,'')
print @sql
EXEC sp_executesql @sql
I have a stored procedure. It can be executed like this
exec test @p = 1;
exec test @p = 2
exec test @p = n;
n can be hundred.
I want the sp being executed in parallel, not sequence. It means the 3 examples above can be run at the same time.
If I know the number in advance, say 3, I can create 3 different Execution SQL Tasks. They can be run in parallel.
However, the n is not static. It is coming from a table.
How can I execute Stored Procedures in PARALLEL and DYNAMICALLY ?
I think about using script task. In the script, I get the value of n, and the list of p, from the table, then running a loop with. In the loop, I create a threat and in the threat, I execute the sp like : exec test @p = p. So the exec test may be run parallel. But I am not sure if it works.
I want to dynamically determine which column I select data from. The table I want to select from looks like this:tblSexualitySexualityID int PKEN nvarchar(20)NL nvarchar(20)DE nvarchar(20)Based on the value of variable @LanguageColumnName I want to select the value from either column "EN", "NL" or "DE"In the sample below the value of @LanguageColumnName is "NL".Unfortunately the value of sexualityname is ALWAYS: "tblSexuality.NL" and not the value from that specific column...how can I alter my procedure so that it does the select the value from that column?ALTER PROCEDURE [dbo].[spFindUsers]@LanguageColumnName nvarchar(3),@startRowIndex int,@maximumRows intASBEGINSET NOCOUNT ON;
declare @tblSexualityName nvarchar(40)set @tblSexualityName='tblSexuality.' + @LanguageColumnName SELECT UserName,UserCode,ThumbNailPicture,BirthDate,ShowAgeOnly,IsMale,NearestBigCity,DistanceToNearestBigCity,Description,IsDonator,IsVIP,SexualityName FROM(SELECT ROW_NUMBER() OVER (ORDER BY UserCode) as RowNum,tblUserData.UserName,UserCode,IsDonator,IsVIP,Description,BirthDate,IsMale,ShowAgeOnly,tblCountries.CountryPicture,@tblSexualityName as sexualityname,tblCountries.CountryName,ThumbNailPicture,LastActivityDate,UserRanking,NearestBigCity,DistanceToNearestBigCity FROM aspnet_Users INNER JOIN tblUserData ON aspnet_Users.UserId = tblUserData.UserID INNER JOIN tblCountries ON tblUserData.Country=tblCountries.CountryID INNER JOIN tblSexuality ON tblUserData.Sexuality=tblSexuality.SexualityID) as MemberInfoWHERE RowNum > @startRowIndex AND RowNum <= (@startRowIndex + @maximumRows)END
I am having problem with 'TOP @pageSize'. It doesn't work, but if I replace it by 'TOP 5' or 'TOP 6' etc., then the stored procedure runs without errors.
Can someone please tell me how I could use @pageSize here so that it dynamically determines the 'n' of 'TOP n' ?
ALTER PROCEDURE dbo.spGetNextPageRecords
(
@pageSize int,
@previousMaxId int
)
AS
/* SET NOCOUNT ON */
SELECT Top @pageSize ProductId, ProductName
FROM Products
WHERE (ProductID > @previousMaxId) order by ProductId
RETURN
I set up a stored procedure. My stored procedure has 8 variables declared at the beginning like this:
===========================
declare@IncurredDateStartsmalldatetime
,@IncurredDateEndsmalldatetime
,@PaidDateStart_CUsmalldatetime
,@PaidDateEnd_CUsmalldatetime
,@PaidDateStartsmalldatetime
,@PaidDateEndsmalldatetime
[Code] ....
All of these dates are based on the update of our data warehouse. This stored procedure runs a 5 step process and produces data for 8 - 10 monthly reports.
I was wondering if these variables can be updated dynamically and if they can how it is done.
I am writing Stored Procedures on our SQL 2005 server that will link with data from an external SQL 2000 server. I have the linked server set up properly, and I have the Stored Procedures working properly. My problem is that to get this to work I am hardcoding the server.database names. I need to know how to dynamically specify the server.database so that when I go live I don't have to recompile all of my stored procedures with the production server and database name. Does anyone have any idea how to do this?
EXAMPLE:
SELECT field1, field2 FROM mytable LEFT OUTER JOIN otherserver.otherdatabase.dbo.othertable
OBJECTIVE:
Replace 'otherserver.otherdatabase.dbo.othertable' with some other process (dbo.fnGetTable('dbo.othertable')????)
Thanks for any help
Hello All,
I have created SP in SQL 2K5 and make the where clause as parameter in the Sp. i am passing the where clause from my UI(ie ASP.NET), when i pass the where clause to SP i am not able to fetch the results as per the given criteria.
WhereClause from UI: whereClause="where DefectImpact='High'"
SQL Query in SP: SELECT @sql='select * from tablename'
Exec(@sql + @whereClause )
Here i am not able to get the results based on the search criteria. Instead i am getting all the results.
Please help me in this regard.
Thanks,
Subba Rao.
Hi all,
I am trying to debug stored procedure using visual studio. I right click on connection and checked 'Allow SQL/CLR debugging' .. the store procedure is not local and is on sql server.
Whenever I tried to right click stored procedure and select step into store procedure> i get following error
"User 'Unknown user' could not execute stored procedure 'master.dbo.sp_enable_sql_debug' on SQL server XXXXX. Click Help for more information"
I am not sure what needs to be done on sql server side
We tried to search for sp_enable_sql_debug but I could not find this stored procedure under master.
Some web page I came accross says that "I must have an administratorial rights to debug" but I am not sure what does that mean?
Please advise..
Thank You
I am building a dashboard features that allows user to select reports from a dropdownlist. It is pulling from a table called Reports (cols: ReportID, Description, sqlView) In this Report table the report is associated to a view that queries the report.
And the user's selections are stored in table called UserReport (cols: userID, ReportID, createDt) .
I need to get a Dataset to contain datables of all reports selected. (for example a user select 3 reports, the dataset should contain 3 datables that represent the report).
I want to accomplish this by create a store procedure that queries the Reports table and then dynamically executes the views that related to the user selected reports. Can anyone give me an example on how to create the storeprocedure?
Thanks,
CG
I am calling a stored procedure (say X) and from that stored procedure (i mean X) i want to call another stored procedure (say Y)asynchoronoulsy. Once stored procedure X is completed then i want to return execution to main program. In background, Stored procedure Y will contiue his work. Please let me know how to do that using SQL Server 2000 and ASP.NET 2.
View 3 Replies View RelatedHello everyone,I need advice of how to accomplish the following:Loop though records in a table and send an email per record. Emailrecipient, message text and attachment file name - that's all changesrecord by record.Is it doable from a stored procedure (easily I mean, or am I better offwriting a VB app)? There are so many options of sending mail from SQLserver - CDONTS, SQL MAIL TASK, xp_sendmail. What's easier to implementand set up?Thanks a lot!!!(links and fragments of sample code would be greatlyappreciated)Larisa
View 2 Replies View RelatedWe have a sort of complex user structure in the sense that depending on the type of user the data resides in different tables. Therefor I needed a stored procedure that finds out what table to look for a certain column in. Below is such a stored procedure and it works like it should but my problem is that I don't know how to retrieve the result (which should be a string so can't use RETURN).
I've tried using an OUTPUT variable but since I just run EXEC (@statement) in the end I can't really set an output variable the common way (as in EXEC @outputVariable = PMC_User_GetUserValue(arg1, arg2..)) or can I?
I have also tried to use SELECT to catch the result somehow but no luck and Google didn't help either so now I'm hoping for one of you... Notice that you don't have to bother about much of the code except for the end of it where I want it to return somehow or figure out a way to call this stored procedure and retrieve the result.
Thanks in advance
ripern
-- Retrieves the value of column @columnName for credential id @credID
ALTER PROCEDURE [dbo].[PMC_User_GetUserValue]
@credID int,
@columnName nvarchar(50)
AS
DECLARE @userDataTable nvarchar(50)
DECLARE @userDataID int
DECLARE @statement nvarchar(500)
SET @statement = ' '
SET @userDataID =
(SELECT PMC_UserMapping.fk_userDataID
FROM PMC_UserMapping
INNER JOIN PMC_User ON PMC_UserMapping.fk_user_id = PMC_User.id
WHERE PMC_User.fk_credentials_id = @credID)
SET @userDataTable =
(SELECT PMC_UserType.userDataTable
FROM PMC_UserType
INNER JOIN PMC_UserMapping ON PMC_UserType.id = PMC_UserMapping.fk_usertype_id
INNER JOIN PMC_User ON PMC_UserMapping.fk_user_id = PMC_User.id
WHERE PMC_User.fk_credentials_id = @credID)
SET @statement = 'SELECT ' + @columnName + ' AS columnValue FROM ' + @userDataTable + ' WHERE id=' + convert(nvarchar, @userDataID)
-- Checks whether the given column name exists in the user data table for the given credential id.
IF EXISTS ( SELECT * FROM INFORMATION_SCHEMA.COLUMNS WHERE TABLE_NAME=@userDataTable AND COLUMN_NAME=@columnName )
BEGIN
EXEC (@statement)
END
Hello,
I am hoping there is a solution within SQL that work for this instead of making round trips from the front end. I have a stored procedure that is called from the front-end(USP_DistinctBalancePoolByCompanyCurrency) that accepts two parameters and returns one column of data possibly several rows. I have a second stored procedure(USP_BalanceDateByAccountPool) that accepts the previous stored procedures return values. What I would like to do is call the first stored procedure from the front end and return the results from the second stored procedure. Since it's likely I will have more than row of data, can I loop the second passing each value returned from the first?
The Stored Procs are:
CREATE PROCEDURE USP_DistinctBalancePoolByCompanyCurrency
@CID int,
@CY char(3)
AS
SELECT Distinct S.BalancePoolName
FROM SiteRef S
INNER JOIN Account A ON A.PoolId=S.ID
Inner JOIN AccountBalance AB ON A.Id = AB.AccountId
Inner JOIN AccountPool AP On AP.Id=A.PoolId
Where A.CompanyId=@CID And AB.Currency=@CY
CREATE PROCEDURE USP_BalanceDateByAccountPool
@PoolName varchar(50)
AS
Declare @DT datetime
Select @DT=
(Select MAX(AccountBalance.DateX) From Company Company
INNER JOIN Account Account ON Company.Id = Account.CompanyId
INNER JOIN SiteRef SiteRef ON Account.PoolId = SiteRef.ID
Inner JOIN AccountBalance AccountBalance ON Account.Id = AccountBalance.AccountId
WHERE SiteRef.BalancePoolName = @PoolName)
SELECT SiteRef.BalancePoolName, AccountBalance.DateX, AccountBalance.Balance
FROM Company Company
INNER JOIN Account Account ON Company.Id = Account.CompanyId
INNER JOIN SiteRef SiteRef ON Account.PoolId = SiteRef.ID
Inner JOIN AccountBalance AccountBalance ON Account.Id = AccountBalance.AccountId
WHERE SiteRef.BalancePoolName = @PoolName And AccountBalance.DateX = @DT
Order By AccountBalance.DateX DESC
Any assistance would be greatly appreciated.
Thank you,
Dave
Hi,
Can anybody please tell me if it is possible to execute an url from stored procedure.
thanks in advance,
preeth
Hello:
I have created a stored procedure that will backup and restore a database.
I would like to be able to execute this sp using public rights - any ideas?
Thanks
How can I use in stored procedure the faction ‘’in’’ to select values, using execute and the values must not be specified before in the stored procedure
View 6 Replies View RelatedHow do you execute a stored procedure in MS SQL Server?I can design and execute them from MS Access dev front end, but cannot seemto find how to run them in the Enterprise Manager.TIA.~ Duane Phillips.
View 2 Replies View RelatedI have setup a user which has execute rights on a stored procedure. The sp is owned by dbo. The user can execute the stored procedure, but it fails, because the stored procedure calls other tables and procedures that the user does not have rights to. Is there a way to allow those procedures to execute without allowing access to everything else for the user I setup? Thanks!
View 3 Replies View RelatedI need to disable and move orphaned computer objects in my Active Directory. The SQL Agent has permission to do this. I have created a stored procedure for the task with intentions of executing it with sp_start_job. However, I cannot execute it in SQL 2005. How can I grant permission to this (login) to execute sp_start_job? This is all run from a web page and NOT the Query Window.
View 1 Replies View RelatedPlease anyone help me with my question
How do I execute a stored Procedure using SSIS ?
I have a stored procedure in SQL SERVER 2005 database that I need to execute using a SSIS package using Execute SQL Task from Toolbox in Visual studio 2005
Thanks,
George
Hi,
I am strugling to execute a insert stored procedure on a button click. The stored procedure is taking values from a temp table and inserting them into a identical table. The procedure is expecting 1 value from a Query string, the stored procedure works as expected when hard coded.
Im completely new to this and have no idea where to begin, i have been looking through the forums for several hours and am still none the wiser.
please can someone point me in the right direction
hi to all,
i have a stored procedure and i want to run a program from it..
i think that i need use api functions but how can i do that..
if there is a nother ways please tell me..
thanx..
I have a button in a form that I want to execute a simple stored procedure to insert a single value into a database table. The Stored Procedure is:=================CREATE PROCEDURE bplog_insert_invoice_detail (@invo_Id Int) ASINSERT INTO Invoice_Detail (Invo_Id) VALUES(@Invo_Id)GO=================How do i pass the value from and text field (@invo_id) and execute the stored procedure when a button is clicked.Regards.
View 1 Replies View RelatedHello, I'm having trouble trying to execute a simple stored procedure. Could someone please take a look at this and let me know where I went wrong.
Dim cn As SqlConnection = New SqlConnection("Data Source=localhost;Initial Catalog=TEST;Persist Security Info=True;User ID=sa;Password=test")
Dim cmd As SqlCommand = cn.CreateCommand
cn.Open()
cmd.CommandText = "cssp_family"
cmd.CommandType = CommandType.StoredProcedure
cmd.ExecuteNonQuery()
cn.closed
Within a stored procedure, is it possible to call multiple other stored procedures asychronously? For example, I'd like to execute both local and remote stored procedures, but don't want/need to wait for the output while the original stored procedure continues to execute each subsequent command.
View 1 Replies View RelatedWhen I run the code microsoft give to launch a DTS package from a stored procedure, the procedure runs continuously, never ending.
When I run the DTS package manually, or from a dtsrun utility, it only takes seconds.
I'm trying to automate this package so it will run after a field in a table has been updated.
Any suggestions are more than welcome.
PS. Here's the code I've been using (that doesn't seem to work):
--- Declare Variables
Declare @hr int
Declare @oPkg int
--- Create Package Object
Exec @hr = sp_OACreate 'DTS.Package', @oPkg OUT
If @hr <> 0
Begin
Print '*** Create Package Object Failed'
Exec sp_oageterrorinfo @oPkg, @hr
Return
End
--- Load Package
---DTSSQLStorageFlags :
---DTSSQLFlag_Default = 0
---DTSSQLStgFlag_UseTrustedConnection = 256
Exec @hr = sp_OAMEthod @oPkg,'LoadFromSqlServer("JENNSERVER", "", "", 256, , , , "RunMS")',null
If @hr <> 0
Begin
Print '*** Load Package Failed'
Exec sp_oageterrorinfo @oPkg, @hr
Return
End
--- Execute Package
Exec @hr = sp_OAMethod @oPkg, 'Execute'
If @hr <> 0
Begin
Print '*** Execute Failed'
Exec sp_oageterrorinfo @oPkg, @hr
Return
End
--- Clean Up Package
Exec @hr = sp_oadestroy @oPkg
If @hr <> 0
Begin
Print '*** Destroy Package Failed'
Exec sp_oageterrorinfo @oPkg, @hr
Return
End
Is it possible to create a stored procedure to run a custom dos command (eg. c:ProgramName param1 param2)?
Thanks,
Ben
Hi, hoping someone may be able to shed some light on this.
I have a stored procedure that conditionally executes different DTS Packages. Everything seems to work, there's no errors at all, but the DTS Packages are never executed. Wondering if anyone has any ideas.
Here's the stored procedure....
CREATE PROCEDURE exportLists
AS
DECLARE @script VARCHAR(8000)
DECLARE @id INT
DECLARE @max INT
select regionid,count(distinct homephone) as phone
into #phone
from tbl_template
Where exportid is null
group by regionid
select officeid,listpath
into #office
from tbl_office
WHERE startdate <= GETDATE()
AND (enddate >= GETDATE() OR enddate IS NULL)
and listpath is not null
and listpath <> ''
Select case when phone > 2500 then '"exportLists" /A MDBFile="' + listpath + '" /A OfficeID ="' + convert(varchar(10),officeid) + '" '
Else '"resetTemplate" /A OfficeID="' + convert(varchar(10),officeid) + '" '
end as cmd
,Identity(int,1,1) as rowno
,phone
into #temp
from #office as O
inner Join #phone as p
on o.officeid=p.regionid
Set @max=@@rowcount
set @id = 1
While @id <=@max
Begin
Select @script='"Dtsrun /S "' + @@SERVERNAME + '" /E /N ' + cmd
+ case when phone > 2500
then '/A ExportID="' + convert(varchar(10),(Select coalesce(Max(listid),0) + 1 from tbl_sf3Lists)) + '" '
else ' ' end
, @id=@id+1
from #temp
Where rowno = @id
End
Return
GO
Which fixed database role allows a user to execute a user defined stored procedure while minimizing the amount of permissions given. I think db_Datareader will do the trick.
View 1 Replies View RelatedHi everybody,
I would like to ask that how can I execute a package from a stored procedure.
Laci
Hi,
I am trying to execute the following simple stored procedure. The procedure runs but doesn't create the table I am trying to create and doesn't insert the records into the table I created. But again, the procedure runs without any errors.
Can someone please correct the syntax so my procedure will run properly. It pretty basic.
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
GO
CREATE PROCEDURE [dbo].[PremierData1]
AS
IF EXISTS(SELECT 1 FROM sys.sysojects where type='U' AND name='PremierTest') DROP TABLE dbo.[PremierTest]
BEGIN
CREATE TABLE dbo.[PremierTest] (
[AYQ] nvarchar(6) null ,
[CYQ] nvarchar(6) null ,
[Description] nvarchar(50) null,
[PIP] [decimal] (17,2) ,
[BI] [decimal](17,2) Not null,
[PD] [decimal](17,2) Not null,
[COLL] [decimal](17,2) not null,
[COMP] [decimal](17,2) not null,
[DCRAT] [nvarchar](2) null ,
[Agent][nvarchar](3) null ,
) ON [Primary]
insert into dbo.premiertest
select *
from dbo.[new agt type tri 0804]
where dir_ceded_ind = 'c'
END
Thank you for any help provided.
I don't know if this is a newbie question or not, I want SQL Server to automatically execute a stored procedure at the first of each month, how can I do this ?
Regards,
AJ
Be nice to nerds. Chances are you'll end up working for one. (Bill Gates)