ERROR 823 Reached End Of File

Mar 2, 2000

When attempting to view the articles which belong to a publication the error 823 is raised. The replication is working fine but can the publication can not be altered or deleted. An article in the publication needs to be removed to allow structure change. Any one seen this message before?

Error 823: I/O error 38 (reached end of file) detected during read of BUF pointer=ox1161zcdo page ptr = 0x13a9e000 pageid = (ox1:ox1495a) dbid=7, status=0x801 file d:mssql7datawestdeeping_data.mdf

Any one have any idead on what causes it or how to get around it or prevent it again??

View 2 Replies


ADVERTISEMENT

Operating System Error 38(Reached The End Of The File.) On File C:Datamyfile_log.LDF

Dec 21, 2006

Hi,

I am facing a problem on a server which has raid 5 solution (3 disks), the raid controller went down 2 of the disks were off in the Bios.

We added the 3 disks to a different server identical in brand and architecture, the raid controller was able to reconfigure the virtual drive H:.

All files were there, we installed sql server 2005 on the new server, but when we tried to attach the database we got the error below:

TITLE: Microsoft SQL Server Management Studio
------------------------------

Attach database failed for Server 'myserver'.  (Microsoft.SqlServer.Smo)

For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Attach+database+Server&LinkId=20476

------------------------------
ADDITIONAL INFORMATION:

An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)

------------------------------

The operating system returned error 38(Reached the end of the file.) to SQL Server during a read at offset 0x00000000af0000 in file 'C:Datamylog_log.LDF'. Additional messages in the SQL Server error log and system event log may provide more detail. This is a severe system-level error condition that threatens database integrity and must be corrected immediately. Complete a full database consistency check (DBCC CHECKDB). This error can be caused by many factors; for more information, see SQL Server Books Online.
Operating system error 38(Reached the end of the file.) on file "C:Datamylog_log.LDF" during ReadFileHdr.
Could not open new database 'mydb'. CREATE DATABASE is aborted. (Microsoft SQL Server, Error: 823)

For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=823&LinkId=20476

------------------------------
BUTTONS:

OK
------------------------------

 

I tried the following steps but it always failed:

- create a new db with the same name of the lost db;

 - put the db in emergency mode;

 - stop sql service and replace the mdf file;

 - start sql service;

 - Run Dbcc checkdb('mydb')

we got the error below:

Msg 945, Level 14, State 2, Line 1

Database 'ism0506' cannot be opened due to inaccessible files or insufficient memory or disk space. See the SQL Server errorlog for details.

 

Any HELP please ?

Thanks,

Tarek Ghazali

Sql Server MVP

 

View 5 Replies View Related

ReadFileHdr: Operating System Error 38(Reached The

Sep 7, 2007

i believe this is the right thread... i recently had an issue where my xpstar.dll would not register and i read to fix the issue to reapply the SP so i installed SP4 i now am getting this error... please help!

2007-09-07 14:24:19.24 server Logging SQL Server messages in file 'C:Program FilesMicrosoft SQL ServerMSSQLlogERRORLOG'.
2007-09-07 14:24:19.24 server SQL Server is starting at priority class 'normal'(4 CPUs detected).
2007-09-07 14:24:19.36 server SQL Server configured for thread mode processing.
2007-09-07 14:24:19.38 server Using dynamic lock allocation. [2500] Lock Blocks, [5000] Lock Owner Blocks.
2007-09-07 14:24:19.40 server Attempting to initialize Distributed Transaction Coordinator.
2007-09-07 14:24:20.44 spid3 Starting up database 'master'.
2007-09-07 14:24:20.49 spid3 Error: 823, Severity: 24, State: 5.
2007-09-07 14:24:20.49 spid3 ReadFileHdr: Operating system error 38(Reached the end of the file.) encountered.
2007-09-07 14:24:20.49 spid3 Error: 5159, Severity: 16, State: 3.
2007-09-07 14:24:20.49 spid3 09/07/07 14:24:20 Stack Overflow Dump not possible - Exception c00000fd E at 0x00449CA1
2007-09-07 14:24:20.49 spid3 Address=449ca1 Exception Code = c00000fd
2007-09-07 14:24:20.49 spid3 eax=ba65a0de ebx=00000002 ecx=42ba8740 edx=0bb0a830
2007-09-07 14:24:20.49 spid3 esi=00000001 edi=42ba8740 eip=00449ca1 esp=0bb09fc4
2007-09-07 14:24:20.49 spid3 ebp=0bb0a56c efl=00010212
2007-09-07 14:24:20.49 spid3 cs=1b ss=23 ds=23 es=23 fs=3b gs=0
2007-09-07 14:24:20.49 spid3 1: Frame: 0BB0A56C Return Address 00449CA1
2007-09-07 14:24:20.49 spid3 2: Frame: 0BB0AD88 Return Address 00449E10
2007-09-07 14:24:20.49 spid3 3: Frame: 0BB0AD9C Return Address 0044A14B
2007-09-07 14:24:20.49 spid3 4: Frame: 0BB0ADAC Return Address 0044A17D
2007-09-07 14:24:20.49 spid3 5: Frame: 0BB0ADF8 Return Address 0044A19B
2007-09-07 14:24:20.49 spid3 6: Frame: 0BB0AE18 Return Address 004CD11C
2007-09-07 14:24:20.49 spid3 7: Frame: 0BB0B2A8 Return Address 005ED83E
2007-09-07 14:24:20.49 spid3 8: Frame: 0BB0B2FC Return Address 00405473
2007-09-07 14:24:20.49 spid3 9: Frame: 0BB0B324 Return Address 00449357
2007-09-07 14:24:20.49 spid3 10: Frame: 0BB0B350 Return Address 00449329
2007-09-07 14:24:20.49 spid3 11: Frame: 0BB0B378 Return Address 00448EE1
2007-09-07 14:24:20.49 spid3 12: Frame: 0BB0B3E0 Return Address 0060CFF5
2007-09-07 14:24:20.49 spid3 13: Frame: 0BB0BC04 Return Address 006D0991
2007-09-07 14:24:20.49 spid3 14: Frame: 0BB0BC18 Return Address 0044A14B
2007-09-07 14:24:20.49 spid3 15: Frame: 0BB0BC28 Return Address 0044A17D
2007-09-07 14:24:20.49 spid3 16: Frame: 0BB0BC74 Return Address 0044A19B
2007-09-07 14:24:20.49 spid3 17: Frame: 0BB0BC94 Return Address 004CD11C
2007-09-07 14:24:20.49 spid3 18: Frame: 0BB0C124 Return Address 005ED83E
2007-09-07 14:24:20.49 spid3 19: Frame: 0BB0C178 Return Address 00405473
2007-09-07 14:24:20.49 spid3 20: Frame: 0BB0C1A0 Return Address 00449357
2007-09-07 14:24:20.49 spid3
2007-09-07 14:24:20.49 spid3 TotalPhysicalMemory = 2146951168, AvailablePhysicalMemory = 1552097280
2007-09-07 14:24:20.49 spid3 AvailableVirtualMemory = 376274944, AvailablePagingFile = 3696713728

View 6 Replies View Related

Error 500, Maximum Concurrent Users Have Reached

Jul 20, 2005

We are running three web sites in a clustered environmentWLBS. The web servers are connected to a Database Serverrunning MS SQL server enterprise edition licensed as perCPU license. The Windows 2000 Advanced Server Licensingmode on all the servers is per SEAT license.Our customers are accessing our web servers and after sometime getting error 500, Maximum concurrent users havereached.We have been told by our software provider that theconnection problem lies with the ADO components whichcommunicating with the SQL server.We have been turning round and round, without any luck.Your help will be highly appreciated.Thanks and best regardsDaveLearning is a Never Ending process*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!

View 1 Replies View Related

SQL Server 2012 :: Internal Error - Expression Services Limit Has Been Reached

Aug 5, 2015

I have a simple SP that returns 2 columns with 4 inner joins, results are about 100 odd rows max, nothing complicated. When I run the SP via SSMS it works fine, as soon as this is run via an application server the SP fails to complete with the error :

Internal error: An expression services limit has been reached. Please look for potentially complex expressions in your query, and try to simplify them.

We are not getting anywhere near the expression limit so I cannot understand why we are suddenly receiving this error. 2 weeks ago this query was running fine, no updates have been rolled out to the SQL database servers or application servers but the error is suddenly appearing on both prod and dev environments.

View 1 Replies View Related

Max Connections Pool Reached

Nov 24, 2005

Hi,Can anyone tell me if he ever got this issue and how he get the solution. In my asp.net 2.0 application i close always ma connexions to sqlserver in the finally clause (the open is in the try); I open 1 ou 2 connecxions per aspx page, i close them always (in the finally clause or at the bottum of the form). Sometimes, the application is down with the messageCan not open a new connexion, max pool size is reached !!!!I host my application on a remote server, i have no performance issues, only this great problem   !!!i cant view the status of connexion on the sqlserver, so what can i do, or how shoud i develop my connection.thanks in advance to all of yuo who will help me.Imed.

View 1 Replies View Related

Maximum Limit For Connections Has Been Reached

Mar 23, 2001

We have been running SQL Server 7 for the past 6 months, with no problems at all. All of a sudden, we have received the error message 17050, that the maximum limit for connections has been reached. We cannot now start Enterprise Manager or do anything. We have tried fiddling with licencing in control panel but to no avail. Does anyone have any idea why this has suddenly happened? Any tips would be great!

Cheers.

View 2 Replies View Related

Maximum Number Of Processes Reached

May 28, 2007

I am trying to setup transactional replication between Server A and Server B. There are 265 databases on each server.


I am running SQL Server 2005 on Windows Server 2003. The problem comes in at the 201st database. The message in the SQL Server Agent Error Log is :

Warning,[398] The job (WSSWPG09-EmpirePaint-WSSWPG06-104) has been queued because the maximum number of working threads (400) are already running. This job will be executed as soon as one of the working thread finishes execution.

SQL Server's max worker threads is set to 0. The Distribution, LogReader and T-SQL subsystems have been increased to 200 max_worker_threads.

Is there some other setting (maybe a Windows Registry setting) that can be configured to fix this? Or have I just hit a physical maximum of the processor?

Any help is much appreciated.

View 3 Replies View Related

What Happens When The 4 GB Database Size Limit Is Reached?

Jan 11, 2007

Does the user get an error message?

What error does an application get that tries to insert additional data via ODBC?

View 10 Replies View Related

Timeout Expired...mas Pool Size Was Reached. I've Tried Everything.

Sep 26, 2007

I am working on a large application built on the 1.1 framework in VS2003 (SQL Server 2000 DB) and keep getting this error:
'Timeout expired.  The timeout period elapsed prior to obtaining a connection from the pool.  This may have occurred because all pooled connections were in use and max pool size was reached'. 
I can run the app in Debug 10 consecutive times, doing the exact same thing every time, and the error will occur at 10 different points, and 10 different calls to the data-access layer.
There is a data-access layer that is responsible for executing sql statements and stored procs.  Every function in the data-access layer handles connections in the following way:
Try  ' setup data adapter   da.Fill(ds, "ResultSet")   Return dsCatch ex As Exception   ' send the exception back to the client    Throw exFinally   ' release objects   da.Dispose()   conn.Close() : conn.Dispose()End Try
 I have read numerous posts about making sure not to leak connections.  I have watched the connections within the SQL Activity Monitor and, at the most, there are 5 connections open at any given time.  I use the default timeout and pool size values (30 sec. and 100 connections) in my connection strings.  I am 99% positive that I am not leaking connections.  Are there any other explanations for why this is happening? 

View 4 Replies View Related

SQL Query To Return Rows Only When A Max Limit On SUM Has Been Reached.

Jul 23, 2005

Hello SQL gurus!I am trying to write a query that will return a set of continguous rowsfrom a table, and limit the number of rows returned when a maximumtotal has been reached by adding a value in one of the columns.For example, the two columns below represent 2 columns in a table.a 2b 2c 2d 3e 4f 5g 5I want to start at, say "c", and return all the rows after it as longas the sum of the numbers in column 2 (starting at "c") don't exceed10. The result I'm after would be thusc 2d 3e 4....because 2 + 3 + 4 = 9 < 10Any ideas? Many thanks.

View 4 Replies View Related

The Server Network Address Can Not Be Reached Or Does Not Exist

Apr 3, 2008

Hi all

When i am trying to configure Mirroring .i am getting the below error.

The server network address "TCP://RDEEPA:5022" can not be reached or does not exist. Check the network address name and reissue the command. (Microsoft SQL Server, Error: 1418)

. TCP/IP and Name pipe connection is enabled in both principle and mirror server configuration.

I post the complete error message below ,which is in red


TITLE: Database Properties
------------------------------
An error occurred while starting mirroring.
------------------------------
ADDITIONAL INFORMATION:
Alter failed for Database 'success'. (Microsoft.SqlServer.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Alter+Database&LinkId=20476
------------------------------
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------

The server network address "TCP://RDEEPA:5022" can not be reached or does not exist. Check the network address name and reissue the command. (Microsoft SQL Server, Error: 1418)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.1399&EvtSrc=MSSQLServer&EvtID=1418&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------

View 21 Replies View Related

SQL Server 2008 :: Maximum Number Of Sessions Has Been Reached

Jun 29, 2015

We have a big software that run a warehouse distribution center, written in .NET Backhand is a SQL Server 2008 R2 STD database.

Now, it seems there is a problem with the sessions not being properly closed after each call to the DB. Here is the message got form SQL:

DESCRIPTION:A new connection was rejected because the maximum number of connections on session ID 57 has been reached. Close an existing connection on this session and retry.

In the .NET code, connection is made with the following code:

If oConn Is Nothing Then oConn = New SqlConnection
If oConn.State = ConnectionState.Open Then oConn.Close()
With oConn
.ConnectionString = "Server=" & Server & ";Database=" & DB & ";User ID=" & User & ";Password=" & Pass & ";Connection Timeout=" & 5 & ";MultipleActiveResultSets=" & True
.Open()
End With

This code is called once, at the opening of the software

StoredProc are call with the code:
Try
oCmd = New SqlCommand
With oCmd
.Connection = oConn
.CommandType = CommandType.StoredProcedure

[Code] .....

So every Command is closed after execution, yet, they stay active in the SQL Server. Is there something I'm missing here?

View 3 Replies View Related

Recovery :: Instance Still Accessible If Transaction Log Reached Maximum Size?

Oct 12, 2015

One of our production databases was setup mirroring, log shipping and replication on it, the log file was setup unrestricted growth. This morning one index rebuilding process generated lots of logs, and the log file disk ran out of space, the database was in recovery mode. so we had to disable log shipping, pause mirroring and replication, expand log file disk, restarted SQL instance to fix the issue. Now we want to setup the log file to maximum size 80G, the whole log file disk is 120G.

So if the log file reached 80G next time, we can change the max size to 90G or 100G and it's easier to fix the space issue. My question is, if the database  log file reached max size,

1. is the database still available? 
2. Will the active session causing the issue be rollback to release space back?

View 5 Replies View Related

Sql Server Causes No Buffer Space Available (maximum Connections Reached?): Recv Failed

Jul 23, 2005

I'll try and keep this brief so in a nutshell:I have large distributed java system running on a Windows 2003 server(4cpu 8Gb memory).Periodically the following exceptions occurs in the servers:java.net.SocketException: No buffer space available (maximumconnections reached?): recv failedI know for a fact we are not using too many TCPIP sockets or runningtoo many socket servers.I have googled this error and found very little to help me.What buffer space is this?What does recv failed mean?(Is it at all relevant that sql server is running on the same box?)Any advice appreciated.Thanks in advance.Dan

View 5 Replies View Related

Connection Pool Limit Reached !! Please Help ! (Using Enterprise Library Data Access Application Block)

Apr 22, 2008

This is my code...
public partial class test : System.Web.UI.Page
{protected void Page_Load(object sender, EventArgs e)
{SqlDatabase database = (SqlDatabase)DatabaseFactory.CreateDatabase("ConnectionString");DbCommand command = database.GetSqlStringCommand("SELECT UserName FROM Users WHERE UserID = '6264'");
 using (IDataReader reader = database.ExecuteReader(command))
{if (reader.Read())
{lblTest.Text = "test";
}
}
}
}
 
 
This is my error:
Server Error in '/' Application.


Timeout expired.  The timeout period elapsed prior to obtaining a connection from the pool.  This may have occurred because all pooled connections were in use and max pool size was reached.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.InvalidOperationException: Timeout expired.  The timeout period elapsed prior to obtaining a connection from the pool.  This may have occurred because all pooled connections were in use and max pool size was reached.Source Error:



Line 21: //DbCommand command = database.GetStoredProcCommand("CorrUsers_GetByUserId_s");
Line 22: DbCommand command = database.GetSqlStringCommand("SELECT UserName FROM Users WHERE UserID = '6264'");
Line 23: database.ExecuteReader(command);
Line 24: using (IDataReader reader = database.ExecuteReader(command))
Line 25: {Source File: d:webwwwrootchacha078dev.cha.toplingo.com est.aspx.cs    Line: 23 Stack Trace:



[InvalidOperationException: Timeout expired. The timeout period elapsed prior to obtaining a connection from the pool. This may have occurred because all pooled connections were in use and max pool size was reached.]
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +1261381
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.SqlClient.SqlConnection.Open() +111
Microsoft.Practices.EnterpriseLibrary.Data.Database.GetNewOpenConnection() +195
Microsoft.Practices.EnterpriseLibrary.Data.Database.GetOpenConnection(Boolean disposeInnerConnection) +106
Microsoft.Practices.EnterpriseLibrary.Data.Database.ExecuteReader(DbCommand command) +62
test.Page_Load(Object sender, EventArgs e) in d:webwwwrootchacha078dev.cha.toplingo.com est.aspx.cs:23
System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) +15
System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +33
System.Web.UI.Control.OnLoad(EventArgs e) +99
System.Web.UI.Control.LoadRecursive() +47
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1436

Any help with this matter would be very much appreciated.
 Thank you for your time.
 Sincerely,
 Jeffrey Pham

View 3 Replies View Related

[File System Task] Error: An Error Occurred With The Following Error Message: Access To The Path Is Denied

Sep 7, 2007

Hi -

I have an File System Task that copies a file from one directory ot another. When I hard code the target directory (c:dirfile.txt) it works fine. When I change it to a virtual directory (\serverdirfile.txt) I get a security error:

[File System Task] Error: An error occurred with the following error message: "Access to the path '\gracehbtest oS2TMM_Live_Title_000002.xml' is denied.".

Where do I change the security settings?

Thanks - Grace

View 5 Replies View Related

Integration Services :: Flat File Error File Being Created In-spite Of No Errors

Jun 23, 2015

I have a package in which there are only one Data flow Task and it has only three components. 1) Source , which is a SQL db 2) destination and 3) OLE DB Destination flat file Error output file.   I want the error file to be created ONLY if there is any error while dumping the data into destination DB. But , the issue is, the error flat file is being created inspite of No error while dumping the  data from Source to Destination.

View 5 Replies View Related

Help Getting Error When Using Operation Rename A File In The File System Task Editor?

Aug 18, 2006

Does anyone know how to do this using variables?  Everytime I try it, I get the

Error: Failed to lock variable for read access with error 0xc00100001. 

 I also tried it writing a script and still the same error.  If I hard code the values into the variables it works fine but I will be running this everday so that it will pull in the current date along with the filename.  So the value of the variables will change everyday.  Here is my expression:

@[User::Variable] +(DT_WSTR,4) YEAR( GETDATE() )+"0"+(DT_WSTR,2) MONTH( GETDATE() ) + (DT_WSTR,2) DAY( GETDATE() )

The result:

C:Documents and SettingsmroushDesktopOSU20060818

the 20060818 part will change everyday ie.(tomorrow will be 20060819, next day 20060820 and so on.)

 

View 6 Replies View Related

File System Task Error When Using SQL Server Agent (when Move File On Network Drive)

Jun 8, 2007

I am able to run SSIS packages as SQL Server Agent jobs with a Control Flow items "File system task", if I move a file (test.txt) from a drive (c on the server (where SQL Agent jobs run) to a subdirectory on the same drive. But, if I try to move a file on a network drive, the package fail.



What I can do to solve this issue.



Bye!

Daniel

View 1 Replies View Related

Flat File Connector Stops Processing File On Empty Row And Generates Fatal Error

Dec 27, 2007

Here's a really annoying problem. Let's say you have a text file with 2 million rows.Delimiters all look good and rows are previewed well but the file has a missing row at say lin 1234567 - way deep in the file. When SSIS encounters the blank row, an error is raised and processing on the file STOPS! I verified this in by checking the SSIS log and have even developed an error routine to notify me via email when the error occurs (really cool if I do say so myself ). The main problem still remains - how to resume processing from the point of failure in the file? Any help is appreciated. Thanks.

View 13 Replies View Related

Cannot Attach Mdf: Create File Encountered Operating System Error 5 While Attempting To Open The Physical File...

Sep 5, 2006

I have used the copy database wizard, but I realized I had forgotten to shrink the transaction log file. So I canceled the wizard. My database, detached by the wizard, has now disappeared. The mdf file is still there, but when I try to attach it manually I get the "create file encountered operating system error 5 while attempting to open the physical file..." error.

Any way I can recover it?

Thanks.

View 4 Replies View Related

DTS Migration Wizard Failed To Save Package File -with Error 0x80070002 - Th System Cannot Find The File Specified.

Jan 31, 2007

Hi,

I use the DTS 2000 Migration Wizard to migrate one of the DTS 2000 packages to SSIS. The migration failed with the following error message:


LogID=17
#Time=6:31 PM
#Level=DTSMW_LOGLEVEL_ERR
#Source=Microsoft.SqlServer.Dts.MigrationWizard.Framework.Framework
#Message=Microsoft.SqlServer.Dts.Runtime.DtsRuntimeException: Failed to save package file "C:Documents and SettingsfuMy DocumentsVisual Studio 2005ProjectsKORTONKORTONProcessCubesMF.dtsx" with error 0x80070002 "The system cannot find the file specified.".
---> System.Runtime.InteropServices.COMException (0xC001100E): Failed to save package file "C:Documents and SettingsfuMy DocumentsVisual Studio 2005ProjectsKORTONKORTONProcessCubesMF.dtsx" with error 0x80070002 "The system cannot find the file specified.".

at Microsoft.SqlServer.Dts.Runtime.Wrapper.ApplicationClass.SaveToXML(String FileName, IDTSPersist90 pPersistObj, IDTSEvents90 pEvents)
at Microsoft.SqlServer.Dts.Runtime.Application.SaveToXml(String fileName, Package package, IDTSEvents events)
--- End of inner exception stack trace ---
at Microsoft.SqlServer.Dts.Runtime.Application.SaveToXml(String fileName, Package package, IDTSEvents events)
at Microsoft.SqlServer.Dts.MigrationWizard.DTS9HelperUtility.DTS9Helper.SaveToXML(Package pkg, String sFileLocation)
at Microsoft.SqlServer.Dts.MigrationWizard.Framework.Framework.StartMigration(PackageInfo pInfo)

Looking at the call stack, it looks like COM wrapper fails on SaveToXML. Can someone tell me how I should workaround this problem?

Thanks,

Bobby Fu

View 1 Replies View Related

Deleting A File From File System - Syntax Error

Jun 29, 2015

Ok so I have some dynamic sql to delete a file that is created via sql earlier on. It is to provision a copy of a database to an instance on link server. Everything works great and the files used to delete. Now, with no code changes it is throwing a syntax error. I do a print of what the dynamic sql is creating before executing and then I copy / paste what was generated into command prompt and guess what!! The file deletes.

Here is the result on screen:

@DeleteBackupFileStatement: DEL adas16.clients.advance.localwip$AvionteAP_Template_893.bak /Q
Msg 102, Level 15, State 1, Line 1
Incorrect syntax near ''.
Msg 102, Level 15, State 1, Line 1
Incorrect syntax near ''.

Here is the code that creates the statement:

SET @DeleteBackupFileStatement = NULL
BEGIN
SET @DeleteBackupFileStatement = 'DEL ' + LTRIM(RTRIM(@BackupFile)) + ' /Q'
END
PRINT '@DeleteBackupFileStatement: ' + cast(@DeleteBackupFileStatement as varchar(400))
BEGIN
EXEC adasdb.master.sys.Sp_executesql
@DeleteBackupFileStatement
END
END

The value of @BackupFile is simply the path of the file with the file name, everything in the prepared statement with the exception of DEL and the switch at the end.

View 9 Replies View Related

File Does Not Exist Error While Renaming A Flat File

May 22, 2008

Hi All,

We have a SSIS package which is accessing a remote Windows file share location.
The package first moves the file from folder-1 to folder-2 and also renames the file during this process.
Then the package reads the file (using a flat file connection FF_SRC) from folder-2 and renames it again after processing it successfully.

The permissions given to the user executing the package on folder-2 are: Read+Write+Modify+List folder contents.

We are facing an error:




Code SnippetFile or directory "Z:folder-2XYZ.txt" represented by connection "FF_SRC" does not exist.





We are getting the above error when the SSIS package is trying to rename the file the second time in folder-2.

However, the file exists in folder-2.

The OS is Windows 2000 Server SP4.

Any ideas why this could be happening and how it could be resolved?

Best Regards,
Avnip

View 8 Replies View Related

Foreach File Enumerator, Skip File On Error.

Mar 11, 2008



Hi,
I'm struck with a small issue.. would be great if somebody can help me out. Here is te scenario

1. There would be more than one CSV files in INPUT folder.
2. I'm using a Foreach Loop file enumerator to loop thru the files and load the data into database.
3. If loading is successful the file need to be moved to ARCHIVE folder and next file needs to be picked up for loading
4. In case if there is an error in loading the file has to be moved into ERROR folder, Error description should be logged to error log text file and next file needs to be picked up for loading.


I don't think increasing max error count is an option as I don't know how many no. of input files are available as it depends upon the feed.

What is the best way to go.

View 16 Replies View Related

CSV File Saved As An Excel File - Error Message

Aug 2, 2007

I hope someone can help me with this - I started receiving this error message in the past month or so when I open a csv report and save it as an Excel file in a folder I use on my VPN and in My Documents. It does not show up when I save it to my Desk Top.

I have Microsoft Office Student and Teacher and Office XP Professional installed on my notebook. I tried to uninstall Office XP and it would not let me. Something about a "patch could not be opened......"

The error message is as follows:

Header: .NET-BroadcastEventWindow.2.0.0.0.33c0d.0.EXCEL.EXE-Application Error

Excel error message The instruction at 0x0beab865 referenced memory at "0x00000008"

The memory could not be "read".
Click ok to terminate the program.

I hope someone could please help me with this I received 60 - 80 csv files a week and everythime I save on I get this pop up message!

Thank you!

Leslie

View 1 Replies View Related

Timeout Expired. The Timeout Period Elapsed Prior To Obtaining A Connection From The Pool. This May Have Occurred Because All Pooled Connections Were In Use And Max Pool Size Was Reached.

Feb 11, 2004

What does this error message imply?

View 3 Replies View Related

Error: CrystalDecisions.CrystalReports.Engine.FormulaException: Error In File C:DOCUME~1AM-TK-~1ASPNETLOCALS~

Sep 27, 2007

Hello,
I am having a crystal report using datastored in a dataset. When I select one of items in a dropdownlist, it gives me this error message. Note that I used that code before in another web page using a different crystal report and a different dataSet and it worked successfully, but this time it doesn't work....anyone can tell me what causes this error and how to solve it???
NOTE: I am using a vb code behind in my .aspx page
 
 
 Error in File C:DOCUME~1AM-TK-~1ASPNETLOCALS~1Temp emp_03ca344b-568e-4ea1-bea8-94f3ef92bbcd.rpt: Error in formula <Record_Selection>. '{StProd2.ItemDescription}' The result of selection formula must be a boolean.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: CrystalDecisions.CrystalReports.Engine.FormulaException: Error in File C:DOCUME~1AM-TK-~1ASPNETLOCALS~1Temp emp_03ca344b-568e-4ea1-bea8-94f3ef92bbcd.rpt: Error in formula <Record_Selection>. '{StProd2.ItemDescription}' The result of selection formula must be a boolean.Source Error:



An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:



[FormulaException: Error in File C:DOCUME~1AM-TK-~1ASPNETLOCALS~1Temp emp_03ca344b-568e-4ea1-bea8-94f3ef92bbcd.rpt:
Error in formula <Record_Selection>.
'{StProd2.ItemDescription}'
The result of selection formula must be a boolean.]
.F(String , EngineExceptionErrorID 
)
.A(Int16 , Int32 )
.@(Int16 )
CrystalDecisions.CrystalReports.Engine.FormatEngine.GetPage(PageRequestContext reqContext)
CrystalDecisions.ReportSource.LocalReportSourceBase.GetPage(PageRequestContext pageReqContext)
CrystalDecisions.Web.ReportAgent.u(Boolean N)
CrystalDecisions.Web.CrystalReportViewer.OnPreRender(EventArgs e)
System.Web.UI.Control.PreRenderRecursiveInternal()
System.Web.UI.Control.PreRenderRecursiveInternal()
System.Web.UI.Control.PreRenderRecursiveInternal()
System.Web.UI.Page.ProcessRequestMain()

View 1 Replies View Related

Flat File Source Error Output Conversion Error With UNICODE Files

May 14, 2008

i have a weird situation here, i tried to load a unicode file with a flat file source component, one of file lines has data like any other line but also contains the character "ÿ" which i can't see or find it and replace it with empty string, the source component parses the line correctly but if there is a data type error in this line, the error output for that line gives me this character "ÿ" instead of the original line.


simply, the error output of flat file source component fail to get the original line when the line contains hidden "ÿ".

i hope you can help me with issue.

Thanks in advance.

View 5 Replies View Related

Error: 5123 CREATE FILE Encountered Operating System Error 5A(Access Denied.)

Mar 22, 2006





HI ,



This is a problem I encountered when I had to detach a database file (type .mdf):



1) I went to the MS SQL Management Server Studi and detached my database file successfully from a connection called Workhorse.



2) I needed to place the .mdf database file into a zip file in order to put it on a remote server. I did this using Shared Portal. This was also successful



3) However when I tried reattaching the database file, I got this error:

CREATE FILE encountered operating system error 5A(Access denied.) while attempting to open or create the physical file "CProgram FilesMSSQL ServerMSSQLData<databasename>.mdf'



Q) The database file and log file (ldf) exist in the correct directory so I don't know what happened. Can any one help?



Thanks much



Tonante


View 42 Replies View Related

Error In Accessing Site Which Is Restored Using STSADM. Error-The File Exists. (Exception From HRESULT: 0x80070050)

Oct 8, 2007

i have restored site using stsadm, site get successfully restored.
all user of the site able to access the site but the unable to access from same machine on which it is restored.
i got the error
The file exists. (Exception from HRESULT: 0x80070050)

View 1 Replies View Related

[ActiveX Script Task] Error: Retrieving The File Name For A Component Failed With Error Code 0x001B6438.

Jul 28, 2006

This error occurs when the ActiveX task tries to execute:

[ActiveX Script Task] Error: Retrieving the file name for a component failed with error code 0x001B6438.

Anybody know how to troubleshoot these errors? I can't find anything on this error code. The same script works in DTS.







View 8 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved